Military Engineer Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date31 Aug 2024
Closing Date27 Sep 2024
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_669332_1Bid Award Id
ViewTender No
8857/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where complete all as specified and directed.
21.9
-
-
Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as specified and directed.
380
-
-
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where complete all as specified and directed.
31.5
-
-
Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
30
-
-
Taking down chowkhats or frame not exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.
20
-
-
Taking down shutters exe 1 sqm and n.exc 2 sqm each and removing complete all as specified and directed.
4
-
-
Taking down 15 mm bore mild steel tubing of medium grade and connections incl cleaning for refixing or removal from site complete all as specified and as directed
150
-
-
Ditto all as per item No 10 above but for 20 mm bore
120
-
-
M&L for RCC (1:2:4) Type B1 (Nominal mix) (20 mm size graded stone aggregate) slab/shelf in kitchen supported on wall , beams and column in floor , roofs , landing , balconies, canopies , deck slabs and in shelves and the like etc complete all as specified and as directed
5
-
-
S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat in rough finished surface of concrete etc complete all as specified and directed
185
-
-
M&L for formwork to edges of concrete flats , trends , breaks in floors, window cill, concrete wall , floor and roof e n exc 20 cm wide and side of RCC, horizontal or sloping and similar work exc 10 cm but n exc 20 cm rough finished surfaces of concrete etc complete all as specified and as directed
90
-
-
M &L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
390
-
-
S&F in repairs 25 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws as in cup board shutters & shelves etc complete all as specified and directed . Note: The frame work will be measured and paid seperately
50
-
-
S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified.
180
-
-
S&F in repairs second class hard wood plain fillets exc 13 sqcm and not exc 25 sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails including necessary treatment with wooden primer and two coats of synthetic enamal paint complete all as specified and directed
55
-
-
S&F in replacement plate rack 1mm thick for kitchen size 900 x 750 mm as per sample approved by the GE or as directed complete all as specified .
6
-
-
M& L for complete removal of existing treatment of old wall surfaces and prepare the surface and apply two coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and as directed
1000
-
-
Ditto all as per item No 20 above but for Ceiling surface complete all as specified and as directed.
600
-
-
M&L for applying 3mm thick wall care putty over prepared wall surface to form the surface even and smooth complete all as specified and directed.
1000
-
-
M&L for applying 3mm thick wall care putty on prepared ceiling surface to form the surface even and smooth complete all as specified and directed
600
-
-
M&L for preparing old painted surfaces of steel and iron surfaces over 10 cm in width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed.
75
-
-
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering,brushing etc , filling in cavities and cracks etc with approved filler and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed.
80
-
-
M&l for preparation old decorated surface of walls by brooming down or with steel wire brushing, scraping down, smoke soot's moulds, moss efflorescent salts& trading oil, greasy spots and filling cracks/holes by putty and applying one coat cement base paint walls complete all as specified and directed
95
-
-
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but n exc 0.11 Sqm (300x300x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as spcified.
60
-
-
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sqm (400x400x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as spcified and directed.
150
-
-
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sq (400x400x7 to 8 mm thick) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:6) complete all as spcified and directed.
15
-
-
M&L for coloured Glazed ceramic tiles as in vertical surface of Size 350x 250 x7mm /450x350x7 mm set and jointed in neat cement slurry laid over 10 mm thick cement rendering in cement mortar 1:6 and pointed in white or colour cement to match the tile complete all as spcified and directed.
150
-
-
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as spcified and directed.
60
-
-
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:6) complete all as spcified and directed.
10
-
-
M&L for 25 mm thick cement concrete type B-1, (1:2:4) (20 mm graded stone aggregate) as in sub base of tiles complete all as specified and directed.
270
-
-
M&L for 20 (+ /- 2mm) thick Granite (of jet black ) work (table rubbed and polished ) in steps ,jambs ,pillars,window cills, cooking plateforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified. Exposed edges to make half round complete all as specified and directed..
14
-
-
M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed
15
-
-
M&L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bulnosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed
80
-
-
M&L for 30mm thick rough dressed sahabad stone slab flooring including 20mm thick cement bedded in CM 1:6 and jointed and pointed in CM (1:3) complete all as specified and directed
110
-
-
M & L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm size graded crushed stone aggregate as in floor etc complete all as spcified and directed.
110
-
-
M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:6) included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed
150
-
-
M&L for 10mm thick cement plaster on concrete surface in cement mortar1:3 included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed
90
-
-
M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar (1:4) included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed
140
-
-
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paint etc complete all as specified and directed.
150
-
-
Ditto all as per item No 42 above but in ceiling etc complete all as specified and as directed.
90
-
-
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed.
140
-
-
M&L precast cement concrete (1:3:6) type C-1 (Using 20mm graded stone aggregate) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar (1:6) complete in wall complete all as specified and directed.
5
-
-
M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.
5
-
-
M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar (1:4) complete all as specified and as directed.
5
-
-
Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed.
5
-
-
M&L for flush pointing to to squared rubble masonry, coursed or uncoursed on brought upto courses in cement mortar 1:4 complete all as specified and as directed.
10
-
-
M&L for cement concrete (1:3:6) type C2 using 20mm graded stone aggregate in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and directed.
150
-
-
S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed
15
-
-
S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepare to receive glass/ guage (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fited to chowkhat made out of 2nd class hard wood, 35mm thick and styles 75mm wide complete all as specified and directed.
15
-
-
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply and fixing in opening as per the specification and drawing complete all as specified and directed.
110
-
-
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with hit moulded plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the tiles and rail with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specificaton & drawing complete all as specified and directed.
20
-
-
S&F second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end) complete all as specified and directed.
0.4
-
-
S&F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed.
55
-
-
S&F Butt hinges cold rolled mild steel 100mm long medium weight complete all as specified and directed.
150
-
-
S&F Extruded anodised aluminum alloy handle 125mm long fabricated type complete all as specified and directed.
120
-
-
S&F Anodised aluminum barrel tower bolt of extruded section 150mm long complete all as specified and directed.
120
-
-
S&F Aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheets, cast of exctruded sections and fixing bolts of extruded section and complete all as specified and directed.
90
-
-
S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed.
30
-
-
S&F 75mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed.
50
-
-
S&F Aluminium anodised barrel tower bolts of extruded section 75mm long complete all as specified and directed.
30
-
-
M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in section 8, clause 8.24 (b) of SSR part-I(2009) complete all as specified and directed.
20
-
-
M&L for preparation of new or previously untreated wooden surfaces of any description ,not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
225
-
-
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.
150
-
-
Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and directed.
90
-
-
S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane complete all as specified and directed.
60
-
-
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed.
30
-
-
S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and as directed
110
-
-
Ditto all as per item No 70 above but for 20 mm bore
90
-
-
Supplying and laying of CPVC pipes 16MM dia SDR 11 & Plain CPVC SDR 11 with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and as directed
40
-
-
Supplying and laying of CPVC pipes 20MM dia SDR 11 & Plain CPVC SDR 11 with all fittings and fixture fixed to walls ceiling or laid in floors complete all as specified and as directed
30
-
-
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc. complete all as specified.
150
-
-
S&F in repairs sinks made of stainless steel lmm thick kitchen or aboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and as directed
7
-
-
S&F in repairs of sink with drainage, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915X460mm with bowl size 410X330X160mm complete all as spcified and directed.
6
-
-
S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.
20
-
-
S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed
20
-
-
S&F in repair Bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and directed.
15
-
-
S& F in repair Stop valve 15mm dia of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) complete all as specified and directed.
15
-
-
S&F in repair Pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed.
20
-
-
S&F in repair Brass CP mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
5
-
-
S&F in repair Brass chromium plated shower rose 125mm size complete as directed and sample to be approved complete all as specified and directed.
15
-
-
S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity all as specified and directed including taking down old one complete all as specified and directed.
10
-
-
S&F for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including necessary cutting to floor tiles and connection to WC complete all as specified and directed.
10
-
-
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
40
-
-
S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
20
-
-
S&F in repairs, wash hand basins vitreous china flat back 450mmx300mm size white, first quality, with and including chromium plated waste grating 32mm size, waste coupling 32mm size ,PVC waste pipe 25mm bore heavy duty China and plug and porcelain stopper, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets complete to walls complete all as specified and directed.
6
-
-
S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed , screwed for iron pipe of bore 15 mm fixed complete all as specified and directed..
15
-
-
S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
30
-
-
S&F in repair Waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45gms/40mm-60 gms) for 32mm bore dia pipe complete all as specified and directed.
30
-
-
S&F in repair towel rail 600 mm long of CP brass, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
20
-
-
S&F in repairs Low density polyethylene (LDPE) pipes 40mm dia of pressure rating 6kgf/sq. cm complete all as specified and directed.
10
-
-
S&F in repair doom grating 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.
40
-
-
S&F in repair Grating doom 125/100 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed.
30
-
-
S&F in repair Soap dish any type fixed to plugs with chromium plated brass screws minimum size 160x160x90mm complete all as specified and directed.
30
-
-
S&F in repairs Gun-metal, globe or gate valves 15mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted
10
-
-
S&F in repairs Gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and direceted
10
-
-
S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
45
-
-
S&F Powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.
10
-
-
S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
15
-
-
S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed also including taking down old one complete all as specified and directed..
10
-
-
S&F in repair vitreous china wash down water closet pan (pedestal pattern), and trap white (excluding flushing cistern and seat cover) including connection to drain (or outgoing pipe) and to fushing pipe, antisyphonage pipe etc complete all as specified and directed
5
-
-
S&F in repair Water closet (Squatt pattern) vitreous China squatting pan, ‘Orissa’ pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) connection to trap and squatting pan including P' trap set in and including concrete etc. complete all as specified and direted by Engr-in-charge including making good to floor
8
-
-
Dismantling of cast iron 100 mm bore pipes jointed in cement motar complete all as specified and directed.
15
-
-
Dismantling of cast iron 75 mm bore pipes jointed in cement motar complete all as specified and directed.
20
-
-
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.
20
-
-
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floor complete all as specified and directed.
15
-
-
S&F for 75mm bore dia PVC (SWR) bends with access door complete all as specified and directed.
5
-
-
S&F for 75mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed
4
-
-
S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed
5
-
-
S&F for 110mm bore dia PVC (SWR) bends with access door complete all as directed.
4
-
-
S&F for 110mm dia PVC (SWR) branch piece single(single Y) equal or unequal with access door complete all as specified and directed
4
-
-
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed
4
-
-
M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
25
-
-
Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / bulk head light / mirror lights etc in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like tube rod, side holders, holders, lamps etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like capacitor, lamp holder, connector, connection wire etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M.
(iv) The contractor shall rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill.The contractor shall engage separate team of technicians / repairer for each at Offr Md accn & Appointment houses/Guest houses..
(v) The contractor shall maintain proper record of repair / maint in a binded compliant register and complaint slip books duly signed by the user and bringing out the details of spares replaced and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below.
375
-
-
Supply only PVC / polycarbonate lamp holders batten/Angle type
30
-
-
S&F in replacement modular step type fan regulator 100W, 2 module complete all as spcified and directed.
20
-
-
S&F in replacement modular switch piano type 10 amps one way one module complete all as spcified and directed.
80
-
-
S&F in replacement modular switch piano type 20 amps one way one module with neon indicator complete all as spcified and directed.
25
-
-
S&F in replacement modular Socket, 6A - 2/3 pin 2 module complete all as spcified and directed.
55
-
-
S&F in replacement modular Socket, 6/16A - 2/3 pin 2 module complete all as spcified and directed.
30
-
-
S&F in replacement of 1 module Blanking plates complete all as specifed and directed
10
-
-
S&F in replacement modular Bell push, 10 Amp with neon indicator one module complete all as spcified and directed.
10
-
-
S&F in replacement modular switch piano type 10 amps Two way one module complete all as spcified and directed.
5
-
-
S & F in replacement of switch piano flush type 5 Amps SP one way complete all as spcified and directed.
250
-
-
S & F in replacement of switch piano type 15 Amps SP one way complete all as spcified and directed.
45
-
-
S & F in replacement of switch socket combination 5/6 Amps flush mounted 5 pin multi purpose complete all as spcified and directed.
250
-
-
S & F in replacement of switch socket combination 5/15 Amps flush mounted 3/5 pin multi purpose complete all as spcified and directed.
100
-
-
S&F in replacement of socket 5/6 Amps flush mounted 3 pin complete all as spcified and directed.
90
-
-
S&F in replacement of socket 5/15 Amps flush mounted 3/5 pin multi purpose complete all as spcified and directed.
80
-
-
S&F in replacement for ceiling rose, 2 to 3 terminals /PVC/Polycarbonate, isolated body complete all as spcified and directed..
40
-
-
M&L in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided complete all as spcified and directed..
50
-
-
M&L in replacement bell push, flush type 5 Amps all as specified and directed.
50
-
-
M&L in replacement of door bell AC 230 volts single phase ding dong type all as specified and directed.
50
-
-
S & F in replacement of switch socket combination with box 5/6 Amps flush mounted 5 pin multi purpose all as specified.
50
-
-
S & F in replacement of switch socket combination with box 5/15 Amps flush mounted 3/5 pin multi purpose complete all as spcified and directed.
40
-
-
S & F in replacement of PVC unbreakable surface boxes of size 4x4 complete all as spcified and directed..
30
-
-
S & F in replacement of PVC unbreakable surface boxes of size 6x6 complete all as spcified and directed.. .
20
-
-
S & F in replacement of PVC unbreakable surface boxes of size 4x7 complete all as spcified and directed..
30
-
-
S & F in replacement of PVC unbreakable surface boxes of size 6x8 complete all as spcified and directed..
20
-
-
S & F in replacement of PVC unbreakable surface boxes of size 8x10 complete all as spcified and directed..
18
-
-
S&F in replacement for white cover plate with frame 1 or 2 module complete all as spcified and directed..
20
-
-
S&F in replacement for white cover plate with frame 3 module complete all as spcified and directed..
25
-
-
S&F in replacement for white cover plate with frame 4 module complete all as spcified and directed..
15
-
-
S&F in replacement for white cover plate with frame 6 module complete all as spcified and directed..
20
-
-
S&F in replacement for white cover plate with frame 8 module complete all as spcified and directed..
25
-
-
S&F in replacement for white cover plate with frame 12 module complete all as spcified and directed..
18
-
-
S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 or 2 module complete all as spcified and directed...
20
-
-
S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module complete all as spcified and directed..
30
-
-
S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module complete all as spcified and directed..
20
-
-
S& F in replacement PVC unbreakable surface boxes suitable for modular switches 6 module complete all as spcified and directed..
17
-
-
S& F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module complete all as spcified and directed..
25
-
-
S& F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module complete all as spcified and directed..
18
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as spcified and directed.
295
-
-
M&L replacement of point wiring with 1.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type/PVC conduit ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box, modular cover plate with frame suitable for modular type switches, sockets, fan regulator etc for following :-
One light/Fan point controlled by one way switch 6 Amps 240 volts
100
-
-
Ditto all as per item no.156 above but One 3 pin 6 Amps socket out let point on independent board.
100
-
-
Ditto all as per item no. 156 above but One 3 pin 6 Amps socket out let point on same board.
10
-
-
Ditto all as per item no. 156 above but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq mm size.
30
-
-
Ditto all as per item no. 156 above but One light point controlled by Two 2-way switches
5
-
-
M&L replacement of point wiring with 2.5 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLSH cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box , modular cover plate with frame suitable for 15 Amps socket and switch outlet power point independent circuit
50
-
-
M&L for secruing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type/ PVC conduit ISI marked of size not less than 25 mm inclusive all accessories complete as specified and directed.
150
-
-
S&F in replacement of flexible conduit pipe ivory grey in colour of dia not less than 25 mm complete all as specified and directed. Make: As per sample approved by Engr-in-charge
200
-
-
Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.
640
-
-
M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 1.5 Sqmm , 1100 Volts grade in and including PVC Conduit/casing caping medium grade not less than 25 mm complete with conduit accessories and copper cable 1.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 1.5 Sqmm cable with 01 run of 1.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM
40
-
-
M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01 run of 2.5 Sqmm earth wire along with casing caping/conduit shall be measured as one RM
180
-
-
M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with conduit accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 04 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM
270
-
-
M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM
50
-
-
M&L replacement of sub main wiring with two single core PVC insulated FRLSH cables with stranded copper conductors 10 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 10 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 10 Sqmm cable with 01 run of 10 Sqmm earth wire along with casing caping/conduit shall be measured as one RM
40
-
-
M&L replacement of sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed Note: Four runs of 4 Sqmm cable with 01 run of 4 Sqmm earth wire along with casing caping/conduit shall be measured as one RM)
30
-
-
M&L replacement of sub main wiring with Four single core PVC insulated FRLSH cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including casing caping/conduit medium grade not less than 25 mm complete with accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Four runs of 6 Sqmm cable with 01 run of 6 Sqmm earth wire along with casing caping/conduit shall be measured as one RM
30
-
-
S&F in replacement of 1100 volts grade heavy duty service cable 4 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as spcified and directed..
100
-
-
S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB ) MCCB as In comer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as spcified and directed.
Note:MCBs/ MCCBs will be measured and paid seperately under respective Sch A item in the schedule
6
-
-
S&F in replacement MCB DB 12 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.
8
-
-
Dittto all as per item no 174 above but 08 way SPN DB (Double door)
12
-
-
Dittto all as per item no 174 above but 04 way SPN DB (Single door)
5
-
-
Dittto all as per item no 174 above but 04 way SPN DB (Double door)
5
-
-
Dittto all as per item no 174 above but 02 way SPN DB (Single door)
5
-
-
S&F in replacement of MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as spcified and directed.
5
-
-
S&F in replacement of MCCB with rating of 63 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals complete all as spcified and directed..
5
-
-
S&F in replacement of C Curve MCB SP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed.
60
-
-
S&F in replacement of C Curve MCB DP 6-32 Amps working on 240 volts,50 Hz 10 KA all as specified and directed.
10
-
-
S&F in replacement of C Curve MCB SPN 40-63 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.
10
-
-
S&F in replacement of C Curve MCB TP 40-63 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.
5
-
-
Supply and fix in replacement of C Curve MCB TPN 40-63 Amps working on 240 volts, 50 HZ,10 KA all as specified and directed.
5
-
-
S&F in replacement sheet metal enclosures Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volts complete with all accessaries etc complete all as spcified and directed.
5
-
-
S&F in replacement sheet metal enclosures Triple pole and earth encolsure with a three pin and earth plug with
socket complete with one triple pole MCB 32 Amps, 240 volts complete with all accessaries etc complete all as spcified and directed.
2
-
-
S&F in replacement of neon lamp indicator square/round type complete all as spcified and directed.
10
-
-
S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked heavy duty for geyser connection cord complete all as spcified and directed..
40
-
-
S&F in replacement NRV valve of size 15mm dia of Brass complete all as specified and directed.
15
-
-
S&F in replacement PVC insulated cable 2 core stranded copper conductor 1.5 sqmm in and including PVC conduit pipe of dia not less than 25 mm all as specified and directed
60
-
-
S&F in replacement PVC insulated cable 3 core stranded copper conductor 4 sqmm in and including PVC conduit pipe of dia not less than 25 mm all as specified and directed
100
-
-
M&L for replacement of earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed
2
-
-
S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on building/pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.
10
-
-
S&F in replacement LED building Sensor security light fiitting 24 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed
10
-
-
S&F in replacement of T5 Tube 18W all as specified and directed Make- Luker LTI818T or equivalent in makes as mentioned at makes list in PS
10
-
-
S&F in replacement of 12 watt,230V surface and wall mounted white LED Mirror Light including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed Make- Luker LIMR13 3-IN-1 or equivalent in makes as mentioned at makes list in PS
10
-
-
S&F in replacement of 10watt,230V surface and wall mounted Inverter LED batten, automaticaily switched ON during a power cut and runs effiectively up to 3 Hrs, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed
50
-
-
S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed
Make- Luker LT5M20 or equivalent in makes as mentioned at makes list in PS.
118
-
-
S&F in replacement of 20watt,230V surface and wall mounted Inverter LED batten, automaticaily switched ON during a power cut and runs effiectively up to 3 Hrs, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed
200
-
-
S&F in replacement Decorative wall mounting Teakwood Finishing Wall Lamp with B22 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose complete all as specified and directed. Make: Luker-LWLTRW4 or equivalent in makes as mentioned at makes list in PS
20
-
-
S&F in replacement Decorative wall mounting Dark Wood Colour Wall Lamp with E27 LED 9W and connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified.
Make: Luker- LWL203-1S or equivalent in makes as mentioned at makes list in PS
30
-
-
S&F in replacement 12 watt, 230V surface mounted LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, including connecting up with twin core twisted flexible copper condctor cable from ceiling rose complete all as specified and directed . Make - Luker Cat part no. LEPSRS12 or equivalent in makes as mentioned at makes list in PS
25
-
-
S&F in repalcement surface/recess mounted 2' x 2' LED Panel lights 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for Armstrong/Grid ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.
Make: Luker Cat Part: LKM2240LN5Y or equivalent in makes as mentioned at makes list in PS
5
-
-
S&F in repalcement recess type LED Downlight lights 12 W with ceiling cut out of Ø 92 mm Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. Make: Luker cat part no. LDR12MTL5Y or equivalent in makes as mentioned at makes list in PS
5
-
-
S&F in repalcement COB light 12W LED Tiltable surface mounting and Environmental friendly, new generation, energy saving, decorative IP 66 all as specified and directed. Make: Luker cat part no. LCOBSP12 or equivalent in makes as mentioned at makes list in PS
4
-
-
S&F in repalcement Focus LED light 3 W with wall/Piller surface mounting and Environmental friendly, new generation, energy saving all as specified and directed.
Make: Luker cat part no. LSP04 BK or equivalent in makes as mentioned at makes list in PS
4
-
-
S&F in replacement of Electronic driver suitable for 9/10/20/30/40 watts LED light/ security light fittings as per existing make complete all as specified and directed
50
-
-
Supply only of Electronic driver 2 to 30 Amps for indoor/outdoor LED strip suiatble and IP 68 protection complete ,Single phase, complete all as specified and directed
10
-
-
S&F in replacement of indoor Profile LED strip of 14.6/15 watts/m linear flex in colour white, with separate electronic drivers of suiatble and IP 65 protection complete ,Single phase, with aluminium profile including mounting on the ceiling as reqd at the site complete all as specified and directed Note : Cost of electronic driver and aluminium profile shall be measured & paid for separately under respective items of Sch 'A'
80
-
-
S&F in replacement of outdoor LED strip of 220 V linear flex in colour WW, with fixing tape and end cap of suiatble and IP 68 protection complete ,Single phase, mounting on the ceiling/wall/piller as reqd at the site complete all as specified and directed
Note : Cost of electronic driver and aluminium profile shall be measured & paid for separately under respective items of Sch 'A'
200
-
-
Supply only of aluminium profile suitable size with accessories complete all as specified and directed
280
-
-
S&F in replacement of connector outdoor LED strip of 220 V mounting on the ceiling/wall/piller as reqd at the site complete all as specified and directed
30
-
-
S&F in replacement of Infrared Presence Surface Mount Sensor for light fittings including connecting up with twin core twisted flexible copper cable to switch and fitting complete all as specified and directed
3
-
-
S&F in replacement of 200 watt integral SMD LED Highbay luminaire with aluminium reflector light fitting incl with inbuilt electronic drivers, necessary hanging arrangements as per site requirement including taking down the existing one all as specified and directed by Engr-in - Charge. Note: . Ladders /Cranes shall be used and shall be provided by contractor for dismantling /fixing of light fittings at roof and cost for the same is deemed to be included.
3
-
-
Dismantling and removing rusted louvers suitable for 150/230/300/450/600 mm sweep exhaust fan and S&F in replacement of MS louvers duly painted gray coloured suitable for 150/230/300/450/600 mm heavy duty exhaust fan alongwith four number mounting bracket with bolts, nuts washers etc complete all as directed.
50
-
-
S&F in replacement of GI pipe ceiling fan down rod of 15 mm dia up to 1 mtr long for ceiling fan made out of 15 mm dia GI heavy grade pipe fixed on ceiling using suitable clamp including necessary new nut, bolt and washer complete all as specified and directed.
20
-
-
Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed.
Note : a).Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only. b) Note No (iii) to (vi) above Item No 116 of this schedule are equally applicable to this item too.
400
-
-
Supply only capacitor of 2.5/4 mfd for ceiling fan/exhaust fan.
600
-
-
Supply only bearing No.6201/6202/6203 or any other No matching to the existing size and suitable for exhaust fan/wall mounted fan.
50
-
-
Preparation of old surface of exhaust fan of any sweep by removing old paint using paint remover or by buring off using blow lamp and cleaning with cloth and spray painting complete exhaust fan with superior quality synthetic enamel paint (smoke gray) after applying primer complete all as specified and directed
150
-
-
Ditto all as per item No.221 above but Air circulated/pedestal of size 450/600mm sweep with superior quality enamel paint (Gray) complete all as specified and directed.
80
-
-
S&F in replacement of 1100 volts grade heavy duty service cable 4 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.
200
-
-
Disconnecting and taking down existing userviceable geyser of 25/50/100 ltrs capacity of any make/brand, taking it to civil workshop for repairing. Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enameled paint and re- fixing to original place complete all as specified and directed
100
-
-
S&F in replacement thermostat and cutout set electronic type, temperature adjustable from 0-80⁰C suitable for geyser of 25 ltrs capacity complete all as specified and directed.
35
-
-
S&F in replacement thermostat temperature adjustable from 0-80⁰C suitable for geyser of 100 ltrs capacity complete all as specified and directed.
5
-
-
S&F in replacement heating element of capacity 2 KW of any type and shape suitable for Existing 25 ltrs capacity geysers as per sample provided complete all as specified and directed
50
-
-
S&F in replacement heating element of capacity 3 KW of any type and shape suitable for Existing 100 ltrs capacity geysers as per sample provided complete all as specified and directed
5
-
-
S&F in replacement flow unit (inner pipe assembly) suitable for geyser of 25 ltrs capacity of any brand/make and for vertical/Horizontal type including rubber ring/gasket complete all as specified and directed.
20
-
-
S&F in replacement metallic flexible hot water connection 600 mm long including necessary washers suitable for geysers of 25 ltr capacity complete all as specified and directed.
50
-
-
Supply only 12W WW LED Lamp for E27 Holders complete all as specified and directed.
50
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements