Military Engineer Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date14 Oct 2024
Closing Date18 Nov 2024
Tender Amount₹ 1,44,95,000
Costs
EMD
₹ 2,19,950Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_675860_1Bid Award Id
ViewTender No
CWE/KKE/TOKEN-19 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L Rendering/plastering, 10 mm thick in cement mortar (1:6 )on fair faces of brick work or concrete sur face of wall complete all as specified and as directed by Engineer in charge.
300
-
-
M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and smooth with sagol complete all as spd and directed by Engr-in-Charge.
100
-
-
M & L for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of wall and applying two coat of oil bound destemper,including Priming plastered and other surfaces with alkali resistant primer complete all as specified and as directed by Engineer in charge.
4850
-
-
M & L for complete removal of existing treatment on wall surfaces of any description plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed. Note;- (i) filling of cracks,holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat.(iii) height upto 15 mtr complete all as specified and as directed by Engineer in charge.
5300
-
-
S & F in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet and single side prelam PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing,including dismantling complete all as specified and as directed by Engineer in charge.
200
-
-
S&F in repair PLEATED pleased blinds made of polyester fabric with alumnium coating at its back. Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colours. Cord lock and pulleys made of brass, design and type as approved by GE complete all as specified and as directed.
60
-
-
M & L for Wall paper -Wall coverings in repair to be made from vinyl (PVF), coated with plastic; rustic metalic/ Natural Finish/ Cork & Mica Finish/ wall texture finish; to be colourfast and washable with dust repellent property. Application of wall paper as per approved sample. Rate to include surface preparation abd application as per manufacturers standards complete all as specified and as directed by Engineer in charge.
100
-
-
S&F in repair E-board 'Everest' or equivalent make of 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 2mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down wall/ceiling boards(fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as directed..
150
-
-
S&F in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or nmanual type with bevel gear box and crank handle type,including dismantling,Thickness of laths in mm 1.0,complete all as specified and directed.
100
-
-
S&F in repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle type,including dismantling,Thickness of laths in mm 1.0,complete all as specified and directed.
40
-
-
Taking down Refixing in the same opening after repair Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type/push pull or manual type with bevel gear box and crank handle type,including dismantling,Thickness of laths in mm 1.0,complete all as specified and directed.
40
-
-
S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivotedflat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets,including dismantling, complete, all as specified and directed.
25
-
-
S&F in repair mild steel, Fe 410-W (Gde E- 250 quality-A) Framed work as in doors or gates,roof structure of any size and section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing,including dismantling, complete all as specified by Engr-in-Charge
700
-
-
S&F,in repair, North light window pannel,poly carbonate, including hacking out,all as per specified and directed by Engr-in-charge
50
-
-
M & L for plain, galvanised mild steel sheeting in ridges hips valley gutters drip and straight flashing (length and girth as fixed) by using 1.0mm thick sheet grade of zinc coating @275 Gms/Sqm both sides and welded or soldered joints including necessary fittings and including dismantling of plain or corrugated steel sheeting any gauge thickness (including Nainital or similar pattern) as in roof covering/vally gutters complete all as specified and as directed by Engineer-in-Charge. Note:-1. Work to be carried out in bldgs/Sheds hegiht of 15-20Mtr (Approximately) 2. Rate quoted by contractor shall be inclusive of dismantling and refixing of AC/GI (corrugated semi corrugated etc) sheets, Wired Figure Glass Light Ventilation at Valley gutters area in roof coverings.
250
-
-
Dismantling asbestos cement (corrugated or semi corrugated) sheets/fibre sheet/ GI Sheet in roof covering complete all as specified
400
-
-
M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with coach screw
200
-
-
M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with coach screws
40
-
-
S&F for 2 mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.
50
-
-
M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
100
-
-
M&L 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275
10
-
-
S&F for aluminum alloy powder coated partly panelled partly glazed office partition of alumunium anodised section of size 100x44.45x2.00 mm thick using 5 mm thick tinted glass of selected quality of required size fixed with rubber beading, aluminium clip, glazing plate and 6-8 mm dia anchor tod and 12 mmm thick both side prelaminated particle board, complete all as specified and as directed by Engineer-in-Charge.
100
-
-
S & F for aluminum alloy powder coated door shutters partly panelled partly glazed shutter having door frame made out of alumunium anodised section of size 100 x 44.45 x 2.00 mm thick and shutters made out of bottom rail of tube section 114 x 44.45 x 2.00 mm thick and top rail, middle rail, styles of tube section 85 x 44.45 x 2.00mm thick, using 5 mm thick tinted glass of selected quality of required size fixed with rubber beading, aluminium clip, glazing plate and 6-8 mm dia anchor rod and 12 mmm thick both side prelaminated particle board including fixed aluminium anodised 2 nos 125 mm circular handle, 200 mm long tower bolts -2 Nos, Door Stopper 2 Nos, One No lock 4 lever (ISI), vertical type of 65 mm with triplicate key, bush and including 3 Nos aluminium butt hinges, double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, making good of wall surface to match with existing surface complete door frame fixed to wall with 8 Nos rawl plugs 150mm, including dismantling old doors complete all as specified and as directed by Engineer-in-Charge.
50
-
-
S & F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc,including taking down old u/s windows and making good the wall for fixing new window, complete all as specified and as directed by Engineer-in-Charge.
148
-
-
S & F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs,including taking down old u/s ventilator and making good the wall for fixing new window complete all as specified and as directed by Engineer-in-Charge.
14
-
-
S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed all as specified and as directed.
5
-
-
M&L for PCC surface preparation by cleaning the surface from any moisture dirt,wax grease,flux residue and all other contaminants, applying two coats of AS 2045 Epoxy primer on PCC surface, supplying and applying, two component dielectric coating on the prepared surface having electric strength not less than 32.2 KV/MM, Dielectric dissipation not less than 0.074, dielectric constant not less than 10.93K. flash point above 52 Degree Celcius, a film of thickness 3 mm is a achieved. Note;- (a) The contractor has to produce a certificate from a Govt approved lab certifying all the characteristic and propereties of caoting as stated above. (b)The contractor has to produced the test reports of the coatings applied at all the location to the complete satisfaction of Engr-in-Charge.(C) The coated rate is deemed to be inclusive of materials required for surface perparation.
100
-
-
Taking down chowkats or frames with shutter without taking off shutters from frame of description n.exc 1.50 sqm each and removing from the site complete all as specified and as directed by Engr-in-charge.
158
-
-
Taking down Shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and as directed by Engr-in-charge.
45
-
-
S & F Factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and as directed by Engineer-in-Charge.
183
-
-
S & F Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.
56.7
-
-
S & F 200 mm long Aluminium anodised barrel tower bolts of extruded sections complete all as specified and as directed by Engineer in charge.
112
-
-
S & F mild steel pressed handles,oval type stove enamelled of size 150mm long complete all as specified and as directed by Engineer in charge.
150
-
-
S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.
112
-
-
S & F 100 mm size stainless steel Light weight butt hinges for PVC door shutters and frames fixed with bright screwes complete all as specified and as directed by Engineer-in-Charge.
210
-
-
M&L non skid coloured digital ceramic tiles 300x300/400x400 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6,including dismantling, complete all as specified.
130
-
-
M&L glazed ceramic tiles size of tiles 450x350/300x200/300x600x5 to 6mm thick vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4,including dismantling, all as specified and directed.
210
-
-
M&L vitrified ceramic tiles 600x600/600x1200 mm 10 mm thick (square/rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in cement mortar (1:4),including dismantling,
700
-
-
M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster in cement mortar (1:3),including dismantling
55
-
-
M&L for sunken flooring as per following details complete all as specified and directed (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance of 5KM to 7.5KM .(b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc.(c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit"Pidicrete URP" or equivalent as given in Appx 'C'.) (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'C' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'C'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'C' on all angle fillets by brush
30
-
-
S& F for UPVC 40 mm dia for spout pipe in sunken floor complete all as specified and directed.
6
-
-
S & F in repair water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white with integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor to match with existing complete all as specified and directed.
15
-
-
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified.
15
-
-
S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon, flushpipe, brackets all as specified and directed by EIC.
39
-
-
S&F in repair vitreous china wash basin white flat back size 580x450 mm including,pillar tap, 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets.
25
-
-
S & F in repair,15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down, complete all as specified and directed by EIC.
200
-
-
S & F in repair, 20mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors,including taking down, complete all as specified and directed by EIC.
100
-
-
S & F in repair,40mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors,including taking down, complete all as specified and directed by EIC.
25
-
-
S & F in repair,110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,including bend, Y etc, laid in trenches or in floors
175
-
-
S&F in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.
35
-
-
S & F in repair bib taps cast copper alloy CP fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm bore dia all as specified and directed by EIC.
50
-
-
S & F in repair stop valves cast copper alloy CP fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia all as specified and directed.
60
-
-
S&F in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed by Engineer in charge.
60
-
-
S&F in repairs 32 mm bore PVC waste pipe 1000 mm long of approved make suitable for WHB, Urinals etc complete all as specified and as directed by Engineer in charge.
60
-
-
S&F in repairs Looking mirror 1200mm x 900 mm beveled edge of selected quality glass fixed with PVC moulded frame, fixed to plugs with chromium plated brass screws all as specified and directed by EIC.
15
-
-
S&F in repair Faucet cera Model-F 8030105AB (ABS),with 1 meter SS Braided connection pipe or techno commercial equvalent complete all as specified and as directed by Engineer in charge.
35
-
-
M & L for preparing new or previously untreated wooden/steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
50
-
-
S&F 3 layered rotational moulded polyethylene water storage tanks capacity 1000 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.
10
-
-
S&F 3 layered rotational moulded polyethylene water storage tanks capacity 500 lit in white colour ( cylindrical vertical with closed top) hoisted and fixed in position including dismantling and removing of old tank all as specified and directed.
15
-
-
Dismantling of precast interlocking paver blocks/Chequred tiles laid dry of any description thickness & size complete all as specified and as directed.
25
-
-
M&L sand/crushed sand filling under floors or foundations including watering and consolidation complete all as specified and as directed.
4
-
-
M&L for 75 mm thick PCC 1:4:8 type D2 in sub base complete all as specified and as directed.
150
-
-
M&L for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006, with grey cement and pigment, rubber moulded tiles M-35 Grade, as in floors, paving, path etc. complete laid over sand cushioning complete all as specified and as directed.
150
-
-
M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base for levelling/above sub base etc all as specified and directed
400
-
-
M&L Chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and as directed.
100
-
-
Removing old tar felt, all loose dirt,old roof tiles,including taking down cement plaster cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.
200
-
-
M & L for rendering 10 mm thick on existing concrete surfaces of roof in CM (1:4) mixed with water proofing compound @ 3% by weight of cement, finishing even and smooth without using extra cement with and including water proofing treatment over RCC slab,complete all as specified and directed by Engineer-in-Charge
200
-
-
M & L for applying oil bound bitumen primer @ 0.3 kg/Sqm,over RCC slab, and providing and laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and applying two coat of solar reflective aluminium paint on membrane surfaces @ 100ml/Sqm complete all as specified and as directed by Engineer in charge.
215
-
-
Supply only Liquid water proofing compound
7.42
-
-
NOTE FOR 512 TECH AREA BUILDING :-
(a) Work to be carried out in bldgs/Sheds height of 15-20 Mtr (Approximately)
(b) The coated rate is deemed to be inclusive of materials required for perparation. Safety factors to be ensured while working at heights. (c ) Contractor has to deploy a Engineering qualified Super viser and all inclusive in CA amounts.
-
-
-
M & L for preparation of old plasterd or unplastered surfaces of wall/ceiling and applying one coat of oil bound destemper complete all as specified and directed
8500
-
-
M & L for complete removal of existing treatment on wall surfaces of any description plasterd or unplastered surfaces of ceiling and applying two coat of oil bound destemper,including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed
850
-
-
M&L for 3mm thick wall care putty on wall complete all as specified and directed
400
-
-
M & L for preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint complete all as specified (Note;- height upto 15 mtr )
6000
-
-
M&L for complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm / Ltr as per manufacture's instruction and all coats incl primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSIAllow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed Make: (Apex Ultima Protek Asianpaints/ Nerolac excel top guard / Berger weathercoat long life 10 )
3000
-
-
M & L for complete removal of existing treatment and preparation of old plasterd surfaces of wall and applying two coats of wall dampness treatment as per manufacturer direction, and as specified and directed by Engr-in-Charge.(Make- Smart care damp proof, Advanced) Note;- (i) filling of cracks,holes and dents are includes in the same rates.
150
-
-
M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint all as specified and directed.
600
-
-
M &L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.
150
-
-
M &L for preparation of old painted plaster surfaces of wall of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.
100
-
-
Clearing and cutting of plant roots on wall ,chajja & roof and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed by Engineer-in-Charge.
50
-
-
M & L for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement,including taking down old cement plaster, complete all as specified and directed by Engineer-in-Charge.
200
-
-
M & L for WPT of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after clearing the surfaces thoroughly and sealing all cracks with acrylic sealing compound as per the manufacturers specifications and directions of EIC, Make : Dr Fixit/Pidilite or equivalent complete all as specified and as directed.
25
-
-
M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement Screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling,complete all as specified and directed.
25
-
-
S&F in repair stainless steel Soap dish, any type and size, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.
5
-
-
S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
10
-
-
S&F in Repair wall mixture three in one with complete accessories complete all as specified and directed .
10
-
-
S&F in Repair Toilet paper holder of fixed to walls with chromium plated (CP) brass screws complete all as specified and directed .
5
-
-
S&F towel ring of PTMT fixed with and incl CP brass screws and wooden / plastic cleats (min wt 90 gms) for kitchen complete all as specified and directed .
5
-
-
S&F in rep Harrison rails, of anodised aluminium alloy with fixing brackets, stops, rollers etc.
100
-
-
S&F in repair,Pillar taps, cast copper alloy, fancy type,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
18
-
-
Disconnecting existing tanks n exc 500 litre capacity,setting aside ( or lowering if required ) for repairs,cleaning,etc. and hoisting if required reconnecting and refixing in position as same.
22
-
-
S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm
10
-
-
S&F in repair cast copper alloy chromium plated shower rose 125 mm size fancy type fixed to 15 mm bore pipe all as sspecified.
5
-
-
Resecuring or easing and adjusting without taking down of Shutters of any description exc 1 sq. m and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge
15
-
-
S & F in repair 3 mm thick sheet glass ordinary quality, in squares n exc 0.5 sq. m each pane with putty/ beads including removing loose or decayed putty/ beads,and hacking out old glass in metal frame etc complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site.
5
-
-
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, including,handle,hinges,tower bolt all necessary fittings,supplying & fixindg in the frame at site as per specifiction & drawing.
25
-
-
S & F Pressed steel door frame for doors of size 105 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) complete all as specified and as directed by Engineer-in-Charge.
20
-
-
S&F 35 mm Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
25
-
-
S&F 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
35
-
-
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads as in door, windows/ventilators etc,all as spcified. .
25
-
-
M & L for Machine cut Kota stone slab 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 10 mm thick screed bed in cement mortar (1:6) as in flooring, kitchen platform, steps etc, including dismantling complete all as specified and as directed.
150
-
-
Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per condition seperately) and making good disturbed surface of walls, floors etc complete all as per the existing finish.
850
-
-
M&L for point wiring in casing & caping of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge.
-
-
-
All as per Srl item No 107 above but point wiring for light/fan/exhaust fan point controlled by one switch.
200
-
-
All as per Srl item No 107 above but point wiring for bell/buzzer point controlled by one bell push.
5
-
-
All as per Srl item No 107 above but point wiring for 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.
25
-
-
All as per Srl item No 107 above but point wiring for 5 pin switch socket outlet 5 Amps on same board controlled by one switch.
90
-
-
M&L for point wiring in PVC conduit of suitable size but not less than 20mm including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same with matching to existing wall all as specified and directed by Engineer in charge.
-
-
-
All as per Srl item No 112 above but light/fan/exhaust fan point controlled by one switch.
220
-
-
All as per Srl item No 112 above but 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.
25
-
-
All as per Srl item No 112 above but 5 pin switch socket outlet 5 Amps on same board controlled by one switch.
50
-
-
M&L for point wiring for one light/ fan/ bell point controlled by one switch in steel conduit with all steel enamelled fittings such as elbow bends, junction boxes, supporting clamps for proper hanging arragements made out from 20x1mm flat aluminium patti including nuts, bolts and bending to shape etc. of appropriate size but not less than 20mm on surface with two run of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 Sqmm nominal cross sectional area 1100 volts grade and including one run of 1.5 sqmm (green colour) PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire incl. suitable size sunken type Galvanised pressed sheet steel 1.6 mm thick terminal box of suitable size with 3 mm thick laminated hylum sheet for mounting switches, sockets etc. and making good the disturbed wall and painting the same with matching colour of the existing wall, incld material all as specified and directed.
-
-
-
All as per Srl item No 116 above but light/fan/exhaust fan point controlled by one switch.
20
-
-
All as per Srl item No 116 above but 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.
5
-
-
All as per Srl item No 116 above but 5 pin switch socket outlet 5 Amps on same board controlled by one switch.
10
-
-
M&L for point wiring complete with 1.5 sq.mm single core PVC insulated, unsheathed multistranded copper conductor FRLSH cable 1100 Volts grade drawn through and including DLP mini trunking but shall be increased as per actual site requirement , ISI marked including accessories like bends, tees, junction boxes fixed concealed/ recessed in wall or ceiling including 1.5 sq.mm PVC insulated but unsheathed multistranded copper conductor FRLSH cable as earth continuity wire including modular metal flush box with white/coloured top cover plate and frame of required modules for mounting of modular switches, sockets,bell push and fan regulators complete including dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and as directed for following:-
-
-
-
All as per Srl item No 120 above but point wiring for light/fan/exhaust fan point controlled by one switch.
100
-
-
All as per Srl item No 120 above but point wiring for 5 pin switch socket outlet 5 Amps on independent board controlled by one switch.
15
-
-
All as per Srl item No 120 above but point wiring for 5 pin switch socket outlet 5 Amps on same board controlled by one switch.
20
-
-
M&L for point wiring complete as specified with 1100 V grade 4 Sqmm single core PVC insulated unsheathed multistranded copper conductor cable FR grade, conforming to relevant IS drawn through and including PVC casing and caping with all accessories fixed on surfaces of wall, ceiling, incl PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover including 4 Sqmm single core PVC insulated and unsheathed copper conductor cable FR grade as earth continuity wire connected to common earth and earth dolly including testing complete all as specified and directed by Engr-in-Charge for one 6 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch.
35
-
-
All as per Srl item No 124 above but for for one 3 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch in steel conduit.
10
-
-
All as per Srl item No 124 above but for for one 3 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch in PVC conduit.
10
-
-
All as per Srl item No 124 above but for for one 3 pin switch socket outlet 15 Amps/AC Point on independent board controlled by one switch in DLP Mini Trunking.
10
-
-
S & F for switch piano flush type single pole, one way 5 Amp.
590
-
-
S & F for switch flush type, 5 Amps, Bell push , flush type , 230 volts AC circuit complete all as specified & directed
5
-
-
S & F for switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal.
55
-
-
S & F for switch socket combination 2 in 1, 3 pin, 5 & 15 Amp flush type universal.
55
-
-
S & F for ceiling rose PVC/polycarbonate, isolated body, three terminals, complete all as specified & directed .
440
-
-
S & F for replacement Stepped type electronic fan regulator flush type suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified & directed.
100
-
-
S & F for bell Ding Dong AC, 230 volts, single pole.
5
-
-
Dismantling and Taking out old unserviceable copper/aluminium sub main wiring/Unarmoured cable (used as Sub main wiring) from any height of any Size and Core with all connecting accessories incld. conduit or casing caping and incld. making good to the disturbed wall and painting the same with matching paint as of existing wall including material all as specified and directed by Engineer in charge.
1145
-
-
M&L for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sqmm, 1100 volt grade conforming to IS drawn through and including New 20 mm PVC conduit and including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sqmm,, FRLSH green in colour as continuous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and directed.
250
-
-
All as per Srl item No 136above but for casing & capping
150
-
-
M&L for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 4.0 Sqmm, 1100 volts grade, drawn through and including New PVC conduit 20 mm dia including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and directed by Engineer in charge.
150
-
-
All as per Srl item No 138 above but for casing & capping
200
-
-
M&L for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 6.0 Sqmm, 1100 volts grade, drawn through and including including New PVC conduit 20 mm dia connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 6.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and directed by Engineer in charge.
90
-
-
All as per Srl item No 140 above but for casing & capping
155
-
-
M&L for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type,10.0 Sqmm, 1100 volts grade, drawn through and including including New PVC conduit 20 mm dia connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type,10.0 sqmm, 1100 Volts grade,,green in colour as earth contuinity wire all as specified and directed by Engineer in charge.
50
-
-
All as per Srl item No 142 above but for casing & capping
100
-
-
Dismantling and drawing out old unserviceable Sub Main Aluminium/copper wiring from Existing Steel/PVC Conduit of any size and any type from any height with all connecting accessaries (excluding conduit or casing caping) and making good the disturbed wall and painting the same with matching to existing wall including material all as specified and directed by Engineer in charge.
550
-
-
M&L for Sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 1.5 sqmm 1100 volt grade conforming to IS drawn through existing Steel/ PVC conduit including 1.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed.
200
-
-
M&L for Sub main wiring at any height including using two single core PVC insulated copper conductor cable (FRLSH) of size 2.5 sqmm 1100 volt grade conforming to IS drawn through existing Steel/ PVC conduit including 2.5 sqmm. PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed.
250
-
-
M&L for Sub main wiring at any height with four single core PVC insulated copper conductor cable (FRLSH) of size 6 sqmm 1100 volt grade conforming to IS drawn through Existing Steel / PVC conduit including two single core 6.0 sqmm PVC multi stranded copper conductor cable (FRLSH) green in colour for continuous earthing all as specified and directed. (Note for item No35 to 47) - (a). Two/Four runs of wiring cable and One/two runs of earth continuity wire shall be measured as one length.
100
-
-
Note : For the above items for execution can be carried out upto the height 10 mtr as per requriment and contractor has to ensure the safe execution and the reqd arrangment will be carried by the contractor.
-
-
-
Disconnecting and taking down old distribution Box with MCB/fuse grip TPN/SPN DB 2 Way to 12 Way old type DB including taking out all cable connections of any description and in any position and making good the disturbed surface of walls, to match with the existing surfaces complete all as specified and directed by Engineer in charge.
30
-
-
S&F, connecting & testing of VTPN DB of 12 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damage like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed of Make Legrand Cat.No. 5077 48 or equivalent in Schneider/L&T. Note : MCCB , MCB will be measured and paid separately under relevant item of this schedule.
3
-
-
S&F, connecting & testing of VTPN DB of 8 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed of Make Legrand Cat.No. 5077 47 or equivalent in Schneider- Acti-9/ L&T-Exora. Note : MCCB , MCB will be measured and paid separately under relevant item of this schedule.
4
-
-
S&F, connecting & testing of VTPN DB of 4 way suitable for MCCB up to 160A as a incomer & SP / TP MCB as a outgoings with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 36kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed of Make Legrand Cat.No. 5077 45 or equivalent in Schneider- Acti-9/ L&T-Exora. Note : MCCB , MCB will be measured and paid separately under relevant item of this schedule.
4
-
-
S&F, connecting & testing SPN DBs of 8 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed of Make Legrand Cat.No. 5076 11 orequivalent in Schneider/L&T.
8
-
-
S&F, connecting & testing SPN DBs of 12 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed of Make Legrand Cat.No. 5076 12 or equivalent in Schneider/L&T.
10
-
-
S&F, connecting & testing SPN DBs of 4 way for using MCBs / MCB isolators suitable for single pole and neutral, with IP 43 -IK09 as conforming to IEC 61439-3 & made of high quality CRCA sheet shall have integrated door earthing system, shall have reversible door facility, ergonomic design with rounded corners to protect against damages like bending, peeling of paint hence preventing rusting. DB shall be with Insulated Busbar with withstand capacity of 10kA, shrouded neutral bar, Door earthing, corner Safe. wiresets, shrouded Neutral bar, earth bar & wire ties, all as specified & directed of Make Legrand Cat.No. 5076 11 orequivalent in Schneider/L&T.
8
-
-
S&F, Thermal magnetic adjustable MCCB 160 Amps 4 pole with breaking capacity 16 KA & shall be Ics=Icu 100%, complete all as specified and directed equivalent to Make Legrand-DPX3 cat No 4200 17 / Schneider-NSX/L&T.
6
-
-
S&F for Thermal magnetic adjustable MCCB 100 Amps 4 pole with breaking capacity 16 KA & shall be Ics=Icu 100%, complete all as specified and directed equivalent to Make Legrand-DPX3 cat No 4200 15 / Schneider-NSX/L&T.
6
-
-
S&F, Thermal magnetic adjustable MCCB 63 Amps 4 pole with breaking capacity 16 KA & shall be Ics=Icu 100%, complete all as specified and directed equivalent to Make Legrand-DPX3 cat No 4200 10/ Schneider-NSX/L&T.
8
-
-
S&F for MCB 40 to 63 Amps, TPN "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed.
10
-
-
S&F for MCB 40 to 63 Amps, TP "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed.
10
-
-
S&F forMCB 6 to 32 Amps, single pole and neutral, "C" curve 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly complete all as specified and directed.
40
-
-
S&F for MCB 6 to 32 Amps, single pole, 10 kA breaking capacity with integrated label holder, sliding bottom clamp, color coded On/Off indication on dolly, complete all as specified and directed.
250
-
-
S&F for connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven single phase including MCB 'C' series SP 20 Amps and supplied with neutral links complete all as specified and directed.
50
-
-
Supply, fixing, connecting and testing in replacement Industrial Earth Plug & socket with sheet metal enclosure of IP44 rating electric driven three phase including MCB 'C' series TP 20 Amps and supplied with neutral links complete all as specified and directed.
10
-
-
Dismantling and Taking down unserviceable any light fitting from any location/height after disconnecting of electrical connection complete including all connected accessories all as directed by Engr-in-Charge.
785
-
-
S&F for LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton Cat part no-Bright Linea CCS-100-20-65-HL2-DP-NWH or technically and commercialy equivalent in Bajaj/Havells
250
-
-
S&F for, CRCA housing box LED Type luminiare suitable for and including 2x20 W 4 feet long complete including tube rod & connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton cat part No IS 340 NWH or technically and commercialy equivalent in Bajaj/Havells
200
-
-
S & F for LED Inverter Batten suitable for and including 20 W 4 feet long tube with back up time of 3 hrs complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make: Bajaj Cat Part No: 830414 or technically and commercialy equivalent in Philips/Havells/cromtons
25
-
-
S & F for36W 2X2 LED recessed mounting light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton Cat Part no-Polaris Nio-I LCTLRNE-36-FO-CDL or technically and commercialy equivalent in Bajaj/Havells
60
-
-
S & F for 36W 2X2 LED Surface mounting light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton Cat Part no-Polaris Nio-III LCTLSNE-36-FO-CDL or technically and commercialy equivalent in Bajaj/Havells
50
-
-
S & F for1X18W,4 Feet LED Ceiling suspended light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton Cat Part no - Vogue line CCP-121-18-WW/TL/CDL-SL-NWH or technically and commercialy equivalent in Bajaj/Havells
20
-
-
S & F for 40W, 4 ft LED Recessed mounted LED Luminaire (1 X 4) complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton Cat Part no-LCBOR-40-CDL(1x4) or technically and commercialy equivalent in Bajaj/Havells
20
-
-
S & F for 20W Double End LED Tube rod including connecting up in existing normal/flameproof fitting & make batten functional complete with all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton Cat Part no Ultron LT8-20-865(2) or technically and commercialy equivalent in Bajaj/Havells
160
-
-
S & F for1X16W, 4 ft LED Flame proof light fitting complete including connecting up to ceiling rose with twin core twisted flexible copper conductor cable with suitable size & all accessories for fixing on steel trusses / false / normal ceiling all as specified & directed. Make Crompton Cat Part no-FIAMMA EXTN1LT8-16/20 or technically and commercialy equivalent in Bajaj/Havells
20
-
-
S & F for 5 to 9 mtr height-100W Industrial LED Highbay luminaire with 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor 0.95,THD10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge.Cat Part No SLE HB 100W COMET NEO-N make : Surya or or technically and commercialy equivalent in Bajaj/Havells Note :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.
80
-
-
S & F for 5 to 9 mtr height-150W Industrial LED Highbay luminaire with 100 Lm/W, with complete all accessories having IP 66 degree of protection, power factor 0.95,THD10%, potted driver, Internal Surge Protection-4KV & External Surge Protection-10KV,LED Source including safety chain with i bolt complete all as specified and directed by Engineer-in-Charge.Cat Part No SLE HB 150W COMET NEO-N make : Surya or or technically and commercialy equivalent in Bajaj/Havells Note :- The quoted rates are deemed to be included the cost of Nut-bolts washars or clamps required to be replaced if old one are found unserviceable.
80
-
-
S & F for lamp holder, PVC/Polycarbonate type with black plate suitable for batten fittings etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and testing complete all as directed by Engr-in-charge.
20
-
-
S & F for LED 18W Bulb complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.
50
-
-
S & F for modular switch one way 6 Amp 1 module.
40
-
-
S & F for modular white cover plate with frame ,3 module.
35
-
-
S & F for modular white cover plate with frame ,6 module.
35
-
-
S & F for modular white cover plate with frame ,8 module.
30
-
-
S & F for metal flush box 3 module.
30
-
-
S & F for metal flush box 6 module.
30
-
-
S & F formetal flush box 8 module.
30
-
-
S & F for modular switch one way 16 Amp 1 module.
30
-
-
S & F for modular socket , 6 A -2/3 pin combined 2 module.
40
-
-
S & F for modular socket , 15 A -2/3 pin combined 2 module.
40
-
-
S & F for modular fan step regulator 120 W-2 module
50
-
-
S & F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 Amps, 240 Volts complete.
10
-
-
M&L for earthing complete with hot dip galvanized steel pipe in pipe electrode, outer pipe 88mm dia medium grade and inner pipe 55 mm dia including testing, 3 mtr long and having 50x6 mm terminal on inner pipe to connect earthing strip with 14 mm holes for nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 100 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with galvanized steel earthing lead of 32x6 mm strip with minimum two Nos of GI nut bolits and connected to test point from earthing pit. The electrode pipes should be filled with 2x 25 kg bags of carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 5 Oms including testing complete all as specified Make U-Protect or equivalent NOTE: IF the desired result not obtained after testing the contractor should do re-eathing without any extra cost.
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements