Military Engineer Services Tender

Supply and fixing Inveter LED street llight 45 watt - IP66 ,PDC housing with battery backup 3-4 hours as per Helonix model No-LED SL45W HLSLD-ML-04-45-CWL-INV-RTC-R complete all as specified all as directed.Make:-Bajaj or equivalent Havells,Crompton

Supply and fixing Inveter LED street llight 60 watt - IP66 ,PDC housing with battery backup 3-4 hours as per Helonix model No-LED SL60W HLSLD-ML-04-60-CWL-INV-RTC-R complete all as specified all as directed.Make:-Bajaj or equivalent Havells,Crompton

S&F LED Street Light PC Lens 36W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make : Bajaj or equivalent Havells,Crompton

S&F LED Street Light PC Lens 70W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make : Bajaj or equivalent Havells,Crompton

Supply in replacement of rigid non metalic PVC conduit 20mm dia exclsive of boxes (junction/terminal) but inclusive of all Tees / bends /elbowes/reducer/bell mouth tubes ends and fixing accessoeriers coupler , lock nuts , saddles , pipe hook etc

Supply of fibre looping box with connector and MCB SP 2 to 6 Amps of size 150x150x100 mm including making connections all as specified and directed by . Make - United / National / Sintex

Supply only PVC insulated and unsheathed cable of size 1.5 Sqmm three core multistranded copper conductor FR cable 1100 V grade confirming to IS 694

S&F PVC flat twin core aluminium cable of size 6 Sqmm

S&F Aluminium cable lug 10/16/25/35 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal

Excavation in trenches Soft / loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed :-

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed .Make : Polycab,Gloster,Havells

Taking out LT Cable of any size(10 sqmm to 24 sqmm for reuse or under Schedule of credit to contractor. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

Relaying of LT Cable of any size obtained from item no 5 as per site requirment and making connections as specified and directed by Eng in charge. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

supply ,Laying ,commossionong,testing in repair UG cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter of following sizes:- Make :- Havells/ Polycab/ Gloster

All as per item no 18 here in before but size of cable 10 Sqmm x 2 Core

All as per item no 18 here in before but size of cable 16 Sqmm x 2 Core

All as per item no 18 here in before but size of cable 10 Sqmm x 4 Core

All as per item no 18 here in before but size of cable 16 Sqmm x 4 Core

All as per item no 18 here in before but size of cable 25 Sqmm x 4 Core

Taking out HDPE DWC Pipe of any size for reuse or under Schedule of credit to contractor. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

Relaying of HDPE DWC pipe of any size obtained from item no 8 as per site requirment as specified and directed by Eng in charge. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

M & L in repair HDPE DWC pipe 40 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection of the following outer dia :- Make:-Infra/Supreme/Prince

Supply & fix cable jointing kit for 1100V XLPE grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable size of cable 10 to 16 sqmm,2/4 core complete all as specified and directed by Engineer-in-Charge. Make :- M-Seal/ Densons/ Dowells

M & L to find out fault location in 1100 V /415 V UG Cable of any size by using cable fault locator directed by all as specified and directed by Eng in charge. Note:-Contractor must bring cable fault locator at site within 24 hours of intimation otherwise recovery @ Rs 1000/Hr will be charged after 24 hours.

Supply and installed manor integrated solar post top lantern with lithium ferro phosphate battery with charge controller and 2 PIR sensors with 360 degree coverage model No - MANOR 20w, 5700K solar post top, Make-Philips/Havells

S&F IP65 rated LED bollard with robust design and efficient light distribution (including accessories and fittings) Make : Bajaj, Crompton, Havells or equivalent

S&F in repair Smart Integrated Solar All In One 20 watt with 40Wp Rating, MPPT Charge Controller, Tiltable LED panel, Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, 40AH battery for 12 hours backup easy to install. Make : Bajaj, Crompton, Havells or equivalent

S&F in repair Smart Integrated Solar All In One 40 watt 75Wp Rating, MPPT Charge Controller, Tiltable LED panel, Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, 60AH battery for 12 hours backupeasy to install. Make : Bajaj, Crompton, Havells or equivalent

Supply and fixing GFRP street light pole of 5 Meter height, with top outer dia 100mm, bottom outer dia 175mm made with translucent conical pole Glass Fibre Reinforced polymer matrix fibre (GFRP) combination of gibre Glass and resign winding by CNC method, designed and made to sustain a minimum wind speed 180 KM/Hr, GFRP anchor plate and base plate of size suitable size, with LOGO and including fixing fittings fioxed and civil foundation as per manufactures design, inculding dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed . Make : CNC Technics Pvt Ltd/Bajaj/RE Ensource. Note : The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

Supply and fixing GFRP street light pole of 7 Meter height, with top outer dia 105mm, bottom outer dia 215mm made with translucent conical pole Glass Fibre Reinforced polymer matrix fibre (GFRP) combination of gibre Glass and resign winding by CNC method, designed and made to sustain a minimum wind speed 180 KM/Hr, GFRP anchor plate and base plate of size suitable size, with LOGO and including fixing fittings fioxed and civil foundation as per manufactures design, inculding dismantling existing u/s street light pole of any type after disconnecting electrical connections and making good the disturbed surface, complete all as specified and directed . Make : CNC Technics Pvt Ltd/Bajaj/RE Ensource. Note : The contractor shall submit and approve the foundation drawing issued by the manufacturer before starting the work.

Supply and installed GI hot dip Galvanized pole 5 mtr, top70 mm, and bottom 135 mm ,Top 70 mm made with 3mm thick Mounting base plate 250x Plate,fix on PCC foundation with foundation bolt 700mm long 250x12 mm with four nos foundation bolts with washer of size 16mm dia and 600mm long mm bolt,including street light bracket single arm minimum expoe lenght 1.5 mtrr length from poles withe pole cape complete as per manufacturer design.(PCC for foundation measured and paid in respected sch a"A" items)

M & L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation of stay assembly, poles, struts etc complete.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded aggregate as in foundation for pole including necessary form work all as specified and directed

S&F Integral decorative LED post-top Jupitor 40W 3000K energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire all as directed. Make : Havells ,Benlo,,Henolix

S&F single arm of 01 Meter length suitable for 9 Meter GFRP street light pole, complete all as specified and as directed.

S&F Electrical bakelite Insulation Rubber matting for electrical installation, thickness 3.50 mm, size 1 x 2 Mtr

Taking down unserviceable feeder pillar/panel of any type any capacity,supplying, designing, fabricating, erecting, connecting, testing & commissioning outdoor type vermin & weather proof totally enclosed double door type feeder pillar box front and back operated with hood (Canopy) on top, sufficient ventilation on sides, cubicle type, compartmentable fabricated out of 3.15 mm thick CRCA sheet powder coated texture finish colour. The panel shall be erected on 50mm x 50mm x 6mm thick MS angle iron frame and shall be pre-wired with PVC insulated copper conductor cable for monitors & Heat shrinkable PVC insulated sleeves, copper strips of appropriate current carrying capacity for connecting the incoming and outgoing MCCBs including reconnecting of existing serviceable cable / new cable with lugs & Brass cable glands. The panel shall consisting of following accessories alongwith under mentioned MCCB and other accessories :- (i) Colour coded copper bus bar 400 Amp rating 3 Phase & Neutral. (ii) Epoxy insulator 16 Nos . (iii) Digital Volt meter 0 to 500 V with selector switch -01 Set (iv) Digital Ammeter with CT 0 to 100A with selector switch -01 set. (v) LED indicators R,Y &B - 01 Set. (vi) Angle Iron stand made out of 50x50x6 mm of suitable size & upto 0.6 mtr high above GL - 01 job. (vii) Internal connection to MCCBs/ MCBs with copper busbar/wiring - 01 Job. (viii) The panel shall provisioned compartments for fixing the following:- (a) MCCB 250 Amp TPN,( as in comming)- 01 No. (b) MCCB 200 Amp TPN, (outgoing) - 01 Nos) (c) MCCB 160 Amp TPN, (outgoing) - 02 Nos). (d) MCCB 100/63 Amp TPN,(outgoing) - 02 Nos. (e) MCCB 40Amp TPN,(outgoing) - 02 Nos Note: (1) The Feeder pillar panel should be front & back openable and hinged door lock handle (2) The door should be tightened with rubber gasket (3) Each compartment have door, lock and Main bus bar and MCCB input & outgoing connection should be suitable size copper bus bar, nut & bolts etc (4) All incomming & out going cable connected through new suitable size copper gland and aluminium lugs, nut & bots etc.