Military Engineer Services Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date30 Jan 2025
Closing Soon25 Feb 2025
Tender Amount₹ 43,10,000
Costs
EMD
₹ 86,200Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695611_1Tender No
8446/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L for special treatment for sunken portion on WC's bath toilet, kitchen etc executed in following stages:-
Stage 1. Providing 15mm thick plaster in CM 1:3 mixed with wtaer proofing chemical for Dr.fixt or shlicrete 'R' of STP ltd in the proportion/quantity all as per manufactures' instructions.
Stage2 : Primer-Mix Tar felt LM of STP ltd ( diluted with water in ration 1:1)@ 250 gms/sqm and apply the primer on the plastered surfaces.
Stage3: Application of 1st coat of tarfelt LM of STP Ltd ( without dilution with water ) 1kg /sqm by brush all as per manufactures instructions.
Stage 4: Laying fibre glass cloth weight not less than 50 gms /Sqm) Over the 1st Coat while the coated surfaces is still sticky.
Stage 5 : After 6 to 7 hours interval, apply second coat i.e final coat of trafelt LM on STP Ltd (without Dilution with water) @ 1kg Sqm by brush as per manufactures instruicons .
Stage 6 . Providing 10mm thick protective plaster in CM 1:3 Mixed with STP No1 @250 Ml/50kg cement all as per manufacturers instructions Stage 7: Carry out ponding test for 48 hours to ensures water tightness of repaired sunken portion.
NOTES : (I) Mode of measurement : Actual area treated ( Floor and adjoining/vertical treated walls) will be measured and paid.
7
-
-
... More
Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
885
-
-
... More
M&L for rendering 15mm thick CM 1:6 on fair faces of brickwork or concrete surface and finished surfaces even and smooth without using extra cement, complete all as specified and directed.
250
-
-
... More
M&L for rendering 15mm thick CM 1:4 on brickwork or concrete surface of walls and finished surfaces even and smooth without using extra cement and by using WPC @3 % by weight of cement upto 15m ht of watch tower, complete all as specified and directed.
320
-
-
... More
M&L for rendering 10mm thick CM 1:4 on brickwork or concrete surface of walls and rough cast plaster in while under coat is in plastic state in the ratio 1:1:1(1 part fine gravel of size between 6 to 12mm, 1 part cement, 1 part coarse sand), and finished even, complete all as specified and directed.
215
-
-
... More
M&L for rendering 10mm thick CM 1:3 on fair faces of concrete surface and finished surfaces even and smooth without using extra cement complete all as specified and directed.
100
-
-
... More
Supply only liquid water proofing compound.
85
-
-
... More
Removal of existing concrete including loose/weak concrete from the concrete structure i.e. beams/ columns/ deckslab etc upto beyond corroded steel reinforcements to a depth of minimum 10mm behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chippers including high pressure water jetting and removal of debris. Concrete around the corroded reinforcement shall be removed properly. The edges of the repair locations of concrete should be saw cut to depth of at least 10mm to avoid featheredging and to provide a square edge complete all as specified and directed by Engr-in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
55
-
-
... More
Preparation of surface and removal of rust in the loosely bonded concrete of the RCC deckslab, beam / girder and piles shall be chipped out using the mechanical cutter exposing the bars and applying Rust Remover using small brush and allow to react it for 16-24 hrs. Before applying protective coating,the surface should be wire brushed and thoroughly cleaned for dust with dry cloth complete all as per manufacturer instructions and directed by Engr- in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
55
-
-
... More
M&L for applying two coats of Anti-Corrosive Primer two component (epoxy anticorrosive zinc rich coating) on reinforcement steel surfaces uniformly. Coating shall be applied by the brush to the exposed and cleaned rebars with an interval of 45 minutes to 1 hour @ 40microns DFT / coat and allowed to completely dry for 24 hours complete all as per manufacturer instructions and directed by Engr- in-Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
55
-
-
... More
M&L preparation of concrete surfaces by removing loose concrete, dust, dirt etc, cleaning the surface properly and applying one liberal coat of epoxy bonding agent ( two component agent) by brush application complete all as per manufacturer instruction and directed. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
55
-
-
... More
M&L for 50mm thick polymer modified mortar ( average thickness) modified single component, alkaline resistant fibre reinforced, thixotropic, cementitious patch repair mortar on concrete structure. Applying the mortar around the reinforcement and finishing to bring it in line with existing concrete surface complete all as per manufacturer instructions and directed by the Engr-in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
55
-
-
... More
M&L for holes of dia 16mm and depth 100 mm drilled @ a spacing of 1mtr c/c both ways on the existing structure .The loose cementitious particles are removed using a air blower to clean the holes.Shear Keys of dia 10mm cut from HYSD rebars are anchored into these holes of depth 75mm and bent out to an equal length of 75mm using Resin Anchor Grout complete all as per manufacturer instructions and directed by the Engr-in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
10
-
-
... More
M&L for Providing & executing injection/pressure grouting in the cracks in the parent concrete by fixing PVC/Aluminium nipples at 150mm to 200mm distance or specified distances as per design and detailed specifications. Pressure grouting using low viscous epoxy grout. Moisture insensitive epoxy resin injection material supplied in 1.5 Litre pack which can grout gaps ranging from 0.25mm to 9mm, having mix density 1060 Kg/m3, compressive strength 60 N/mm2, Tensile Strength 20 N/mm2, Flutural strength 45 N/mm2. Pressure grouting shall be carried out after surface preparations includes fixing nipples and filling cracks with epoxy mortar one day before grouting, injecting low viscous grout mechanically about pressure 3.5-7.0 Kg/Cm2, removing nipple after grouting and sealing with epoxy mortar etc complete as directed by Engr - in - Charge. Payment shall be made on actual grout consumed. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
4
-
-
... More
M&L for Cutting, fabricating new reinforcement Fe500 and fixing with old existing reinforcement which was reduced to 20% or more of its original diameter as provided in original structure and additional steels as directed by EIC to be fixed with chemical anchor grout Lokfix E55 (Styrene free vinyl-ester resin based cartridge system for anchoring reinforcement supplied in 300 ml cartridge with a single mixer nozzle of Fosroc or equivalent approved make, application includes drilling hole close to old reinforcement bar with suitable drill as per dia of bar, cleaning the hole with wire brush and compressed air, putting Lokfix E55 or equivalent with gun followed by placing rebar with slide rotational motion to avoid air void formation etc complete all as per manufacturer instructions
and as directed by the Engr-in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
40
-
-
... More
M&L for Drilling holes into existing concrete substrate for anchoring of new rebars nwith 10mm dia shear connectors at 0.5 mtr c/c and fixed with chemical anchor Lokfix E55 or equivalent - Styrene free vinyl-ester resin based cartridge system for anchoring reinforcement supplied in 300 ml cartridge with a single mixer nozzle, shall be tested in accordance European approval to EAD-33087-00-0601 for use in post-installed rebar, which supersedes ETAG 001 TR 023 (rebar), LEED compliant VOC Level, Fire resistance120mins, Seismic C1 testing as part of EAD 330499-00-0601 for specific fastening sizes etc. Typical applications includes drilling hole 14mm dia and 90mm deep as per manufacturers recommendation, cleaning the hole with wire brush and compressed air, putting Lokfix E55 with gun followed by placing shear connector with slide rotational motion to avoid air void formation etc complete as directed by EIC. HSE Guidelines : Recommended to wear tight fitting, dust-resistant, chemical splash goggles if airborne dust is generated, Wear protective gloves. Wear appropriate clothing to prevent any possibility of skin contact. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
15
-
-
... More
M&L for micro concrete to existing concrete structure including proper tight leak proof shuttering SPL polymer modified cementitious ,low permeable 'free flow 'non shrink 'self compacting micro concrete shall be grade M70 as per recommended w/c ratio and pouring as per the required thickness complete all as per manufacturer instructions and directed by Engr- in- Charge. Note :- The contractor Quoted rate should includes necessary scaffolding and form work both for new work as well as for protection of existing structure during rehabilitation.
0.8
-
-
... More
M&L for preparation of new plastered or unblistered surfaces of walls including scrapping and applying two coats of distemper oil emulsion over a coat of 1mm thick wall care putty, complete all as specified and directed.
250
-
-
... More
M&L for Preparation of new plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and upto ht of 15m from GL, complete all as specified.
535
-
-
... More
M&L for preparation of new plastered or unblistered surfaces of ceiling and apply two coats of distemper oil emulsion over a coat of 1mm thick wall care putty, complete all as specified.
100
-
-
... More
M&L for complete removal of existing treatment on old surface of walls and applying 2 coats of Oil Bound Distemper over 1 mm thick wall care putty on walls complete all as specified.
600
-
-
... More
M&L for Preparation of old wall surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and upto ht of 15m from GL , complete all as specified.
230
-
-
... More
M&L for preparation of old plastered or unblistered surfaces of ceiling and apply one coats of distemper oil emulsion, complete all as specified.
240
-
-
... More
Removing existing water proofing treatment what so ever exist (except concert padding) and removing debris/ rubbish materials off the site complete all as specified and directed.
170
-
-
... More
M&L for APP modified roof treatment over existing RCC roof with following specification :-
(a) Applying bitumen primer @ 0.4 Litres/Sqm with density of 0.87 to 0.89 Kg/Litres at 25 degree C on the prepared dry roof surface.
(b) Laying 3 mm thick APP membrane weight not less than 3.50 Kg/Sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be done through an authorised applicator of manufacturer of APP membrane.
170
-
-
... More
M&L for painting over the APP membrane with a solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm prescribed by manufacturer complete all as specified
170
-
-
... More
Taking down chowkats or frames with shutters ( without taking off shutters from the frame) exc 1.5 Sqm but n exc 4 sq. m each, complete all as specified.
38
-
-
... More
Taking down chowkats or frames with shutters ( without taking off shutters from the frame) n.exc 1.5 Sqm each, complete all as specified.
32
-
-
... More
Taking down shutters of any description exc 1 sqm but n.exc 2 sqm, complete all as specified.
5
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as specified.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
115
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as specified.
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
48
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
24
-
-
... More
S&F 18mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain white colour board for backing of cup boards and bathroom/kitchen cabinets/ partition etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately).
30
-
-
... More
Supply only stainless steel star headed full treaded wood screws, bright finished, with slotted countersunk head, designation 4 to 10 (2.74 to 4.88mm nominal shank dia), n.exc 50mm , complete all as specified.
8
-
-
... More
M&L for 18mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work
20
-
-
... More
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, supplying & fixing in opening as per specification and drawing
130
-
-
... More
S&F PVC factory made wire gauged shutter with wire gauge warpped on an additional square 8mm MS solid tube and this tube shall be welded to MS tube. The wires gauge shall be stretched to tighten firmly, PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail all as per specification and drawing given in SSR Part II, Schedule of rates 2010 and directed but as in four panels in lieu of two panels. Note : The wire mesh shall be measured separately.
15
-
-
... More
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
21
-
-
... More
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed.
22
-
-
... More
S&F 100mm size Butt hinges, stainless steel ,hinge pin, and fixed, complete all as specified.
124
-
-
... More
S&F 150mm long aluminium anodized barrel tower bolts of extruded section.
80
-
-
... More
S&F 150mm extruded aluminium alloy handles fabricated type anodized.
150
-
-
... More
S&F 75mm size Butt hinges, stainless steel ,hinge pin, and fixed, complete all as specified.
144
-
-
... More
S&F 100mm long aluminium anodized barrel tower bolts of extruded section.
36
-
-
... More
S&F 100mm extruded aluminium alloy handles fabricated type anodized.
70
-
-
... More
S&F aluminium 75mm size Hasp and staple, safety type, including bolt to hinge plate and fixed with screws
36
-
-
... More
S&F 250mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
15
-
-
... More
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified.
15
-
-
... More
S&F 300mm mild steel helical door spring including roller plate complete all as specified and directed
10
-
-
... More
S&F MS bands, straps, supports of stays, hold fast, wall ties etc and similar articles etc confirming to Fe-410-310m
5
-
-
... More
M&L for cutting holes in bricks walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar or cement concrete 1:2:4 type B1 as required exc half brick but not exc one brick complete and as directed.
40
-
-
... More
Dismantling stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.
5
-
-
... More
M&L for machine cut polished cuddappa stone slab 20 to 25 mm thick as in cills/jambs, cooking platform of window & door openings, set jointed and pointed in neat cement slurry with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete including 15mm thick backing coat in cement mortar 1:4, complete all as specified.
40
-
-
... More
M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., and nosing /rounding to edges of stone slabs one edge,all as specified and directed .
10
-
-
... More
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for chowkats/shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions
248
-
-
... More
S&F for ordinary sheet glass 4.8mm thick and glazing with oil putty/beddings in square exc 0.5 sq, in each panes, complete all as specified.
18
-
-
... More
S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified.
2
-
-
... More
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete all as specified.
32
-
-
... More
M&L for applying silicon sealant in gap/joint between aluminium section and cill/soffits of windows/ openings, complete all as specified.
27
-
-
... More
Taking down aluminium sliding windows of any description and any size and replacing the wornout, broken wiremesh, aluminium sections, glass, rubber beading, rollers, locks etc as required and fixing back in to the same opening for easy movement of shutters including necessary fittings and fixtures. NOTE :- Items such as I) Wiremesh, ii) Glass, iii) Rubber bedding, iv) Rollers v) Locks, vi) Aluminium sections etc will be paid separately under respective items as supply only.
12
-
-
... More
Supply only PVC Star lock for Aluminium windows.
24
-
-
... More
Supply only Nylon / PVC Rollers for Aluminium Windows.
20
-
-
... More
Supply only Rubber bedding suitable for aluminium door/window shutters.
20
-
-
... More
S&F as in repairs curtain rods mild steel, chromium plated with fixing brackets, stops, rollers etc including brackets, complete all as specified
52
-
-
... More
S&F as in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified.
2
-
-
... More
S&F as in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified.
2
-
-
... More
S&F PVC flexible wastepipe 40mm dia, 600mm long with connectors for sink, superior quality
12
-
-
... More
Dismantling old Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified.
140
-
-
... More
Supply and fix false ceiling with powder coated exposed GI grip suspension system (E-grip T-2430 of equivalent load carrying capacity with mid span deffection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross tee 1200mm/600mm long wall angle. The main runners to be placed @ 1200mm, the cross tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm from a modular grid of 1200mm X 600mm. Additional cross less of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally from a grip of 600mm X 600mm. Grip of modular size 600mm X 600mm shall be supported by 6mm dia GI wire from purlins/soffit with and including 6mm thick high pressure steam cured non asbestos fiber and fixed complete all as specified and as directed. Make : Armstrong.
140
-
-
... More
S&F for ceiling boards 600x600x15mm in size, fixed in snap grid false ceiling frame work of approved colour, type complete fixed in position all as specified and directed. Make : Armstrong Optra RH95/ FG Classic.
140
-
-
... More
Dismantling floor hearth or wall tilling including cement mortar bedding ( but not backing) all as specified.
508
-
-
... More
M & L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6), complete all as specified.
208
-
-
... More
M&L coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering in CM (1:4), complete all as specified and directed.
12
-
-
... More
M&L, Glazed ceramic tiles coloured of size 350x 250x 7 mm/ 450X 300X 7mm laid on vertical surface such as dado/skirting over cement mortar backing coat, set jointed in neat cement slurry and pointed in white or coloured cement including 15mm thick backing coat in CM 1:4 , complete all as specified.
288
-
-
... More
S&F as in repairs stainless steel plate rack of size 900 x 580 x210 mm fixed to wall with screws all as specified and directed.
8
-
-
... More
Dismantling water tanks of capacity 500 ltrs & taking down from building or from staging, complete all as specified.
7
-
-
... More
S&F Rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position and including 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified.
7
-
-
... More
Taking up or down 15mm bore steel tubing and connections, complete all as specified.
40
-
-
... More
Taking up or down 20mm bore steel tubing and connections, complete all as specified.
48
-
-
... More
S&F 15mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls ( concealed) and ceilings or laid in floors, complete all as specified.
40
-
-
... More
S&F 20mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls (concealed) and ceilings or laid in floors , complete all as specified.
48
-
-
... More
S&F as in repairs 20mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified.
8
-
-
... More
Cutting holes (superficial area n.exc 150 Sqcm) into or through brick walls built, in cement mortar and stone walls built in lime mortar or walls of lime concrete. and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required.
16
-
-
... More
S&F as in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 X 440mm white, with integral foot rests, complete all as specified.
2
-
-
... More
S&F as in repairs Vitreous China wash down water closet pan (pedestal pattern), including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified.
6
-
-
... More
S&F as in repairs health faucet (ABS Body mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
6
-
-
... More
S&F 10 ltr capacity PVC low level flushing cistern 10 litre capacity with 32mm bore polythene flush pipe of sufficient length including internal fitting (valve less syphonic) etc. complete fixed as in repairs.
8
-
-
... More
S&F as in repairs Vitreous China wash basin, white, flat back, size 550 x 400mm including brackets or fixing with bolts in wall , 15mm fancy pillar tap, waste coupling, waste pipe, complete all as specified.
8
-
-
... More
S&F as in repairs 15mm bore dia Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed , complete all as specified.
40
-
-
... More
S&F as in repairs 15mm bore dia Stop valves, CP cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified.
24
-
-
... More
S&F as in repairs Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified.
8
-
-
... More
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.
16
-
-
... More
S&F as in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers
8
-
-
... More
S&F in repairs aluminium anodised tubular towel rail 20mm dia 600mm long including necessary aluminium brackets complete all as specified and as directed.
8
-
-
... More
S&F as in repairs 75mm dia of outlet PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement, complete all as specified.
16
-
-
... More
Taking down rain water pipes/PVC pipes/cemented pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc.,& including scaffolding, complete all as specified.
84
-
-
... More
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors , complete all as specified.
8
-
-
... More
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors , complete all as specified.
4
-
-
... More
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified.
36
-
-
... More
S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls, complete all as specified.
36
-
-
... More
S&F 110mm PVC (SWR) branch piece, single (single T/Y) equal or unequal provided with access door, complete all as specified.
8
-
-
... More
S&F 75mm PVC (SWR) branch piece, single (singleT/ Y) equal or unequal provided with access door, complete all as specified.
16
-
-
... More
S&F 75mm PVC (SWR) bends any radius provided with access door fixed to pipe , complete all as specified.
4
-
-
... More
S&F 110mm PVC (SWR) bends any radius provided with access door fixed to pipe , complete all as specified.
2
-
-
... More
S&F 75mm bore of PVC (SWR) vent cowl, complete all as specified.
8
-
-
... More
S&F 110mm bore of PVC (SWR) vent cowl, complete all as specified.
8
-
-
... More
S&F 110mm bore PVC (SWR) 'P’ trap, complete all as specified.
8
-
-
... More
S&F 110mm PVC (SWR) WC connector bent type and 110mm PVC (SWR) WC connector with lip ring, complete all as specified.
8
-
-
... More
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 75mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified.
20
-
-
... More
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 110mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified.
16
-
-
... More
Demolition of RCC in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified.
1.56
-
-
... More
Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately)
0.39
-
-
... More
S&F for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165, complete all as specified.
455
-
-
... More
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified.
24
-
-
... More
M&L for cement concrete in foundations, filling and mass concrete type B2 1:2:4 , complete all as specified.
1.44
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified.
2.8
-
-
... More
S&F Joist, channel, angle, or tee sections, vertical posts fixed independently, without connecting plates, etc. confirming to Fe 410- W (Gde- E-250) quality -A, complete all as specified.
800
-
-
... More
S&F rolled sections as in main & cross beams , columns, hip and jack rafters , purlins where connected to common rafters and running rails & any other places with angles cleats or other connected plates, wind ties etc confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.
750
-
-
... More
S&F plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified.
20
-
-
... More
S&F Hand rails, half round or other steel section , for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts &struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets ( for securing wire mesh) complete all as specified.
100
-
-
... More
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified.
120
-
-
... More
Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.
215
-
-
... More
Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws all as specified.
16
-
-
... More
M&L preparation of new Steel surface synthetic enamel paint of two coats in any description, over 10 cm in width or girth, not otherwise described, over a coat of Red oxide, zinc chrome, specified and directed.
100
-
-
... More
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
2.5
-
-
... More
M&L for brick work with sub class B bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.
2.5
-
-
... More
Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr deep in soft/loose soil and getting out complete all as specified and directed by Engineer-in-charge.
5
-
-
... More
Returning filling in soft/loose soil including spreading, levelling, ramming in layers not exc. 25 cm thick all as specified and directed by Engineer-in-charge.
3
-
-
... More
Removal of excavated soils from site to in defence land a distance exc 1.50 Km but not exc 5 Km and depositing where directed at a level not exc 1.5 mtr above the starting point as directed by Engineer-in-charge.
2
-
-
... More
Dismantling of 150mm Salt glazed ware or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required.
18
-
-
... More
S&F for 150mm bore RCC pipe class NP-2 laid and jointed complete with collers as specified including testing all as specified and directed by Engineer-in-Charge.
18
-
-
... More
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 150mm bore RCC pipe complete all as specified and as directed by Engineer-in-Charge.
17
-
-
... More
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in foundations, filling ad mass concrete.
1.25
-
-
... More
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching, coping, cills steps, parapets, railings up to 60cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified.
0.6
-
-
... More
M&L, Extra for forming fair finished drain or channel 20cm inner girth in cement concrete, using ex-tra cement, including forms, moulds, mi-tred/stopped ends etc.
2
-
-
... More
Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 Sec) in cement concrete 1:2;4 type BI smooth finished and reforming benching as reqd for 200mm bore of pipe.
1
-
-
... More
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips completed all as specified and directed.
20
-
-
... More
M&L for Providing precast cement concrete type B-1 (1:2:4) by using 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:4, complete all as specified.
0.3
-
-
... More
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
10.5
-
-
... More
M&L for 100mm thick cement concrete type D2 1:4:8 as in sub bases, sub floors etc , complete all as specified.
100
-
-
... More
M&L for coloured Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6, complete all as specified.
100
-
-
... More
M&L for 75mm thick cement concrete type B-2 1:2:4 as in floors, pavings etc and finishing cement concrete surface even and smooth , and making impressions of expended metal, whilst the concrete is green, complete all as specified.
50
-
-
... More
M&L for providing and injecting chemical emulsion for post constructional ant termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified.
200
-
-
... More
M&L for providing and injecting chemical emulsion for post constructional ant termite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified.
30
-
-
... More
M&L for providing and injecting chemical emulsion for post constructional ant termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified.
400
-
-
... More
Taking down carefully point wiring and removing from site such as (Light,fan socket or power) Complete including fitting and fixtures,fan regulators switch boards,switches,ceiling rose's lamp holder from existing batten PVC conduit/steel conduit wiring complete excluding light fittings and fans all as specified and making good to the disturbed surfaces to match with existing ,complete all as specified and as directed
297
-
-
... More
M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 1.5 sqmm (Nominal area) FRLS PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, junction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for sunken cast iron/ pressed steel terminal boxes suitable length and thickness for mounting, switches, sockets, fan regulator with 3 mm thick plastic laminated sheet cover fixed with cadmium plated machine screws and cup washers, duly grouting and painted with red oxide metal primer and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed .
176
-
-
... More
All as per Srl Item No 150.00 above here in before but for one socket outlet 5/6 amp on independent board complete all as specified and directed
40
-
-
... More
All as per Srl Item No 150.00 above here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed
48
-
-
... More
All as per Srl Item No 150.00 above here in before but for one switch socket combination 6 pin 6/ 16 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed
24
-
-
... More
All as per Srl Item No 150.00 above here in before but for one light point controlled by two 2 ways switches complete all as specified and directed
1
-
-
... More
All as per Srl Item No 150.00 above here in before but for call bell point complete all as specified and directed
8
-
-
... More
S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified complete all as specified and directed
264
-
-
... More
S&F Switch piano, flush type single pole, one way 16 Amp complete all as specified and directed
24
-
-
... More
S&F Socket outlet 2 in 1, 5 pin, 5A complete all as specified and directed
88
-
-
... More
S&F Socket outlet 2 in 1, 6 pin, 6/16A flush type complete all as specified and directed
24
-
-
... More
S & F switch piano flush type 5/6 Amps single pole two ways complete all as specified and directed
2
-
-
... More
Supply and fix industrial socket metal clad plug and socket with MCBs single pole 20 Amp complete all as specified and directed
8
-
-
... More
S&F bell push flush type 5 Amp complete all as specified and directed
8
-
-
... More
S & F stepped type, single socket fan regulator for ceiling fan 1200/1400mm sweep complete all as specified and directed
24
-
-
... More
S&F Electronic bell AC 230 Volt single pole ding dong type complete all as specified and directed
8
-
-
... More
S & F ceiling rose surface bakelite three terminals complete all as specified and directed
114
-
-
... More
Taking down carefully existing serviceable LED Tube light/ bulkhead/ security light/ recess mount fitting of any size and refixing the same to respective location after carrying out cleaning all the components of fittings, including replacement of nuts, bolts and connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed
10
-
-
... More
S & F in replacement LED Tube light fitting with polycarbonate housing and integrated electronic driver, 20 watt having input voltage AC90-300V, 50 Hz , 6500K, surge protection min 4 KVA and all other accessories including connection with flexible cable copper conductor twin core of size 23/.2 mm upto ceiling rose/connector complete all as specified and directed .
56
-
-
... More
Supply and fixing LED building security light fitting 35 Watt 230 V, surge protection 10 KVA, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.& Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 1 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed.
6
-
-
... More
S & F in replacement LED Water tight bulk head fitting 10 W,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED all as specified and directed.
10
-
-
... More
S & F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. all as specified.
8
-
-
... More
S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed,
48
-
-
... More
S&F LED lamp 9W for angle holder complete all as specified and directed.
48
-
-
... More
S & F in replacement for Sub Main wiring with two single core 6 Sqmm PVC insulated FRLSH multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing capping conduit with and including PVC insulated 6 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing capping shall be ISI marked)
Note :- Two length of 6 Sqmm cable and one length of 6 Sqmm earth cable along with PVC casing capping will be measured as one running length
80
-
-
... More
S & F in replacement for Sub Main wiring with two single core 4 Sqmm PVC insulated FRLSH multistranded flexible copper conductor cable 660/1100 volts grade drawn in through flexible non metallic PVC casing capping conduit with and including PVC insulated 4 Sqmm multi strand copper conductor as continuous earth wire in green colour connected to common earth dolly ,complete all as specified and as directed (Note : PVC cable and PVC casing capping shall be ISI marked) Note :- Two length of 4 Sqmm cable and one length of 4 Sqmm earth cable along with PVC casing capping will be measured as one running length
96
-
-
... More
S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted Vertical TPN 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enamelled dust and vermin proof , IP42 and above suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessity complete all as specified and directed .
3
-
-
... More
S & F in replacement sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways, 240 Volts, ISI marked 200 amps bus bar stove enamelled dust and vermin proof, IP 42 suitable for incorporation MCBs and isolators etc including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessity complete all as specified and directed.
8
-
-
... More
S&F in replacement MCCB TP&N 63 Amps with breaking capacity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed
3
-
-
... More
S & F in replacement MCB ‘B’ series type suitable for 240 volts, AC supply 6 to 32 Amps, S P & N with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
8
-
-
... More
S & F in replacement MCB ‘B’ series type suitable for 240 volts,10 KA, AC supply 6 to 32 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed
92
-
-
... More
Disconnecting electric connection and taking down carefully serviceable ceiling fans and Geyser and deposite in MES store for safe custudy. After the building repair work or as directed refixing /hanging the ceiling fan and geyser including electric connection with and including new flexible sheathed copper wire 3 core from ceiling rose/connector to fan connector, including in replacement new nut bolts, rubber reel, capacitor 2.5mfd, machine screws and split pins etc including painting the ceiling fan complete body with blades, canopies, down rod etc. with synthetic enamel paint by spray gun after scraping down old paint in colour as directed complete all as specified
32
-
-
... More
S&F storage type water heater (Geyser) electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, fusible plug,top plug 15Amp ,heating element upto 2 KW rate pressure 6 bar etc. required for proper functionality & including electric/earth connections and carrying out grouting & complete installations with mounting bolts,nuts including testing after installation complete all as specified and directed
2
-
-
... More
S&F PVC flexible pipe connection suitable size with PTMT nuts of length 450mm and PVC washers on both ends complete for cold water/hot water inlet/outlet line. Complete all as specified and directed
8
-
-
... More
S&F Heavy duty metal body exhaust fan of 300mm sweep ,240 volt,copper winding, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in cement mortar (1 :4) white washing matching with existing colour etc.
4
-
-
... More
S&F exhaust fan made of sturdy engineering plastic of 250mm sweep ,240 volt, complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in cement mortar (1 :4) white washing matching with existing colour complete all as specified and directed
8
-
-
... More
S&F ceiling fans AC single phase 230/240 V of size 1200 mm sweep without regulator having Min air delivery 210 CFM with service value 6.00 BEE 5 star rated with brushless direct current motor (BLDC) complete with electrical connection providing three core round flexible copper conductor cable of suitable size complete all as specified and directed
4
-
-
... More
Dismantling and Taking down L.T. under ground armoured PVC/XLPE insulated and PVC/XLPE sheeted heavy duty 1100 Volts grade under ground cable of any size complete all as specified and directed.
150
-
-
... More
Taking out serviceable unreinforced precast concrete cable cover during excavation of trenches complete all as specified and directed
450
-
-
... More
Excavation in trenches not exceeding 1.5 m wide and not exe 1.5 M in depth and getting out in hard/dense soil complete all as specified and directed .
24.3
-
-
... More
Returning filling in including spreading levelling, watering and well ramming in layers not exe 25 cm each layer complete all as specified and directed.
16.34
-
-
... More
Removing excavated material to a distance not exe 50 M and depositing where directed not exceeding 1.50 M above the starting point complete all as specified and directed.
7.97
-
-
... More
Supply and spreading in trenches clear dry sand for cable protection and punning down gently 10 cm below the cable and 15 cm above the cable all as specified. Note :- Punning thickness only measured.
7.29
-
-
... More
Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 ISI marked flat size 250x150x40 mm laid in trenches as specified and as directed.
450
-
-
... More
M&L for cutting existing road/hard standing not exc 50x60 cm in wide & depth getting out excavated material for laying GI tube , for passing through LT cable, returning filling & well ramming watering finish surface 10 cm from top using PCC 1:1.5:3; including removal of surplus soil complete all as specified and directed
10
-
-
... More
Supply and lay jointing and testing and commissioning in replacement of 25 Sqmmx4 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed
150
-
-
... More
Supply & fixing in replacement of meter box of size (0.6mX0.6mX0.25m) made of Polycarbonate shall have Transparent cover, should be weather/ vermin proof, anti-acid, anti corrosive, UV resistance, fire retardant, thickness 2.25 mm double door, single opening with lock arrangement suitable for fixing 02 Electric meter & TPN DB box including taking down existing electric meters , refixing them with two single core PVC copper conductor unsheathed wire multistranded 4 sqmm, properly painting complete and fixing in wall with suitable cutting, cement & brick work etc all as specified and directed
2
-
-
... More
Supply & fixing in replacement of meter box of size (1.0mX1.0mX0.25m) made of Polycarbonate shall have Transparent cover, should be weather/ vermin proof, anti-acid, anti corrosive, UV resistance, fire retardant, thickness 2.25 mm double door, single opening with lock arrangement suitable for fixing 04 Electric meter & TPN DB box including taking down existing electric meters , refixing them with two single core PVC copper conductor unsheathed wire multistranded 4 sqmm, properly painting complete and fixing in wall with suitable cutting, cement & brick work etc all as specified and directed
1
-
-
... More
Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level earth lead 4 mm dia along with GI pipe 20mm dia from plate to panel board by means of bolts , nuts, check nuts and washers of GI all as shown electrical plate No -5 including alternate layer of charcoal dust and salt around the electrode and excavation , earth work, watering arrangement , funnel and wiremesh , 20mm GI pipe used for watering with iron funnel etc. all as specified and directed
3
-
-
... More
Supply and lay GI pipe 50 mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed
20
-
-
... More
M&L for steel water tubing medium grade of size 25 mm bore with all fittings laid in trenches or fixed to wall or floor. Complete all as specified and directed
50
-
-
... More
M& L Cutting existing steel tubing for alterations or additions 40m or 50 mm size , Add if necessarily done in position without taking down.
3
-
-
... More
S & F Gun-metal, globe or gate valves 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%