Military Engineer Services Tender

Material and labour for PCC 1:3:6 type C-2 by using (40mm graded stone aggregate) as in foundation of post holes complete all as specified and directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Material and labour for rendering 15mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Material and labour for rendering 10mm thick internal using cement plaster in CM 1:6 on fair faces of brick/concrete work surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-0 by using (20mm graded stone aggregate) as in coping /bed block etc inclduing necessary form work complete all as specified and directed.

Material and labour for finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and labour for hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface of 100mm thick with broken/ stone /boulders complete all as specified and directed.

Material and labour for moorum/ red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and labour for 100mm thick PCC (1:4:8) type D-2 by using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 25mm thick cement concrete 1:2:4, type B-0, by using ( 12.5mm graded stone aggregate) complete all as specified and directed.

Material and labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to IS 1161-1979 grade Fe 290 (Gde E-165) complete all as specified and directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding /velly gutter to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth (without using extra cement ) complete all as specified and directed.

Material and labour for glazed machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade laid over a layer of fine river sand, watering and consolidating complete all as specified and directed. (Note: Sand will be measured and paid for separately under respective item as supplied only).

Supply only river bed fine sand for screed bed for paving flooring complete all as specified and directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

Material and labour for preparation of new concrete surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fix Ist class hard wood (Teak) plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Supply and fix cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles not exc 5 kg complete all as specified and directed.

Supply and fix framed work such as framed railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Material and labour for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Drilling and tapping for holes drilled up to exc. 25mm and not exc. 40mm dia depth of hole in exc 25mm but not exc 40mm and tapped in addition (with standard or gas thread, as directed) complete all as specified and directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated material exc 250m but not exc. 500m and depositing where directed complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete including dummy switches wherever required all as specified and making good disturbed surfaces applying putty /distemper/ white washing etc for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

All as per item No 30 here-in before but One 3 pin 5 amp socket outlet point on the same board with other switches complete all as specified and directed.

All as per item No 30 here-in before but One 3 pin 5 amps socket outlet point on independent board complete all as specified and directed.

All as per item No 30 here-in before but wiring with 4.0 sqmm multi stranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power point complete all as specified and directed.

Supply and fix modular switch single pole one way 6A, 1 module, 250 volt AC suitable for modular switch boxes complete all as specified and directed.

Supply and fix modular switch single pole one way 6A, 2 module, 2/3 pin 250 volt AC suitable for modular switch boxes complete all as specified and directed.

Supply and fix modular switch single pole one way 6A/16A , 3 pin 250 volt AC suitable for modular switch boxes complete all as specified and directed.

Supply and fix modular switch single pole one way 6A/16A , 2/3 pin , 2 module 250 volt AC suitable for modular switch boxes complete all as specified and directed.

Supply & fix fittings with surface mount/ recessed mount LED down lighters 12W (round/ square) including driver with rated voltage 240V, 50Hz complete all as specified and directed.

Supply & fix LED street light fitting 35 watt, 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting with 3 core 1 sqmm copper conductor cable including mounting GI (made out of 25mm dia light grade pipe 0.8m bent to shape) including FI clamps nut bolts complete all as specified and directed.

Supply & fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1400mm sweep, minimum air delivery 245 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed.

Supply and fix MCB single pole and neutral, 240 volt, 6 to 32 amps, 10 KA breaking capacity, 'C' series, complete all as specified and directed.

Supply and fix MCB single pole 240 volt, 6 to 32 amps, 10 KA breaking capacity, 'B' series complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified and testing on completion including the material and labour for:- (a) Excavation and earth work or drilling hole for electrode in any type of soil. (b) PCC pit in cement concrete 1:2:4 type B-1. (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm. (d) Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified. (e) 15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt. (g) Connection to earthing test point and testing on completion.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep in soft/ loose soil and getting out complete all as specified and directed.

Material and labour for sand cushioning with dry river sand in trenched for cushioning of under ground cable line including spresdinh, leveling, well ramming complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover, class LV, type-1 flat, size 250mmx 140mmx 40mm complete all as specified and directed.

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc. 1.5mtr above starting point complete all as specified and directed.

Supply and fix galvanised octagonal decorative poles (6.0m long) complete with base plate and finial taper plug, nuts and bolts including foundation and coping complete all as specified and directed.

Supply & fix LED street light fitting 60 watt, 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. (LED and driver should be BIS certified)

Supply and laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core in trench/ floor/ on pole/ wall complete all as specified and directed.

Supply and laying in trenches/ pole or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq mm, 2 core including testing after laid and jointed complete all as specified and directed.