Military Engineer Services Tender

Supply and fixing, Installation Testing & Commissioning of Indoor type Programmable Logic Controller based Valve Automation and communication Panel suitable for control and/or monitoring of 02 Nos. Pumps, 02 Nos Pressure Transmitter, 03 Nos. Priming Solenoid Valves, 02 Nos. Air release Solenoid Valves, 5 Nos motorized valves (+02 Spare) and 02 Nos. magnetic sensors PrimingTanks-01(2 Levels), energy meters and 01 Nos Ultrasonic level sensor, . The panel should be of suitable size fabricated from 2.0 mm thick CRCA sheet and properly powder coated. PLC with following specifications:- (i) Suitable Digital inputs/ outputs, (ii) 4 serial ports supporting open communication protocol, 01 No. Ethernet port, (iii) Programming software based on IEC to facilitate building of custom built function blocks (iv) Expandable up to 192 DI / DOs. (v) 01 No. SMPS of 5 A rating (vi) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating. (vii) Selector Switches as per requirement (vii) Selector Switches as per requirement The control logic shall be as directed by the Engineer In Charge for Automatic Operation of Motor Actuated Valve, Supply: 230V, 50 Hz Compatible with OFC based and GPRS communication. Compatible for Wimax Connectivity . (viii) 01 no. HMI - 7" Graphical Touch screen display (a). 01 nos. RS 485 and 01 no. USB port (b). Serial multilink, USB downloading port (c). Support external data storage on a USB memory stick for storing production data and backing up applications (ix). It shall support integrated web server. Mounting: Grouted on floor/on Wall

Supply and fixing, Installation Testing & Commissioning of Indoor type Programmable Logic Controller based Valve Automation and communication Panel suitable for control and/or monitoring of 16 Nos motorized valves and 24 Nos. magnetic sensors . The panel should be of suitable size fabricated from 2.0 mm thick CRCA sheet and properly powder coated. PLC with following specifications:- (i) Suitable Digital inputs/ outputs, (ii) 4 serial ports supporting open communication protocol, 01 No. Ethernet port, (iii) Programming software based on IEC to facilitate building of custom built function blocks (iv) Expandable up to 192 DI / DOs. (v) 01 No. SMPS of 5 A rating (vi) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating. (vii) Selector Switches as per requirement (vii) Selector Switches as per requirement The control logic shall be as directed by the Engineer In Charge for Automatic Operation of Motor Actuated Valve, Supply: 230V, 50 Hz Compatible with OFC based and GPRS communication. Compatible for Wimax Connectivity . (viii) 01 no. HMI - 7" Graphical Touch screen display (a). 01 nos. RS 485 and 01 no. USB port (b). Serial multilink, USB downloading port (c). Support external data storage on a USB memory stick for storing production data and backing up applications (ix). It shall support integrated web server. Munting: Grouted on floor/on Wall

Supply and fixing, Installation, Testing & Commissioning of Motor Actuated Ball Valve (with wheel for manual operation) consisiting of suitable single phase Actuator and ball valve of size 50 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed. Specification Supply and fixing eatures Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Ball Material: Stainless steel Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting :Direct on valve