Military Engineer Services Tender

Material and labour for applying two coats of retro - reflective thermoplastic painting lines, dashes, arrows,letter etc on road,pavements,kerb stones and having width of 10cm and thickness 2mm with road marking paint,white or golden yellow including cleaning and preparation or existing surface or on new surface complete All as specified and directed by Engineer - in - Charge. .

S & F Convex Safety Mirror 80 cm dia polycarbonate Traffic mirror unbreakable round wide angle Driveway mirror,Red in colour(light weight) with adjustable brackets and nut bolts also including pole of 7 feet height and 2 inch (50mm) dia for installation of the pole including excavation in post holes and getting out in hard/dense soil ,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, removing surplus soil off the premises and fixing pole in PCC M-10 grade (Nominal Mix) using 20mm graded stone aggregate complete all as specified and directed by Engineer-in- Charge. Make:Oscar / 3 M or equivalent make given under list of make

S & F Rubber Road Speed Breaker of size 500 X 350 X 50 mm of yellow/black colour with 4 hole in each having 10 tons traffic capacity for installation complete all as specified and directed by Engineer-in- Charge. Make: Alcolite Pune or equivalent make given under list of make.

S & F informatory reflective Sign board n. exc 6sqm each single side writing on 2 mm thick aluminium sheet as required with high intensity prismatic reflecting tape the aluminium board shall be fixed on 2 Nos of stainless steel pole in each board. having dia 76 mm with 16 guage steel duly polished for best shine fitted round globe on top of height 2.1m each. complete all as specified and directed by Engineer-in-Charge. Make: Cat No. SE-1007 of sun Eyes product.or equivalent make given under list of make.

S& F Precast RCC round/cylndrical bollard M-35 grade cement concrete 950 mm to 1500 mm Height X 150 mm dia including excavation in hard/dense soil,returning, filling in,removing surplus soil off the premises and fixing bollard in PCC M-10 grade (Nominal Mix) using 20mm graded stone aggregate complete all as specified and dircted by Engr-in-Charge.

S & F Stainless Steel Robust post with spring machanism round shape (Grade 304) traffic bollard for lane divider having height of of pipe 950 mm , dia of pipe 60 mm lane divider of size 1000 X 150 X 40 mm including reflective band 75 X 3 / 100 X 2 Nos and thickness of pole 2 mm and fixed complete all as manufacture instruction and all specified and as dircted by Engr-in-Charge. Make : Cat part No SS-975 (A) of Make 3 M or equivalent make given under list of make.

M & Lfor providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for preparing black top surface of airfield with compresed pressure air jet, scrubbers and brushing with wire brushes for removing all loose dust, dirt, caked mud and cleaning the cracks in surface etc. sweeping with brooms and finally fanning clear surface with gunny bags and making the surface free from dust etc & applying evenly uniform coating with polymer modified emulsion (PME) of RW grade for Fog seal/spray treatment by spraying with self-propelled or towed bitumen mechanical pressure sprayer and moping of total liquid (Mixture of Emulsion and water) @ 1.0 kg per sqm after Dilution with water in 1:1 ratio or as per manufacturer instruction whichever is approved by GE and ensure uniform finish of Prade Ground/Airfield surface including sealing of all cracks etc all as per manufactures instruction, MORTHs specification for Fog Spray/Seal and as per directed by engr-in-charge. (Note; The work shall be carried out by approved qualified applicator of te Manufacturer of PME)

M&L for preparing new/existing painted concrete/ bituminous surface (road/parade ground) and painting lines, dashes, letter etc not otherwise 10cm wide & thickness 2mm and applying one coat of thermoplastic paint upto uniform finishes surface etc all as per MORTHs specification, white with using road painting/marking machine all as per directed by Engr-in-charge