Military Engineer Services Tender

Removing excavated material exc 250m but not exc 500m and depositing where directed at any level complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed.

M & L for cement concrete 1:4:8 type D-2 using 40mm graded coarse stone aggregates as in foundaton filling and mass concrete all as specified and as directed.

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders all as specified and as directed.

M & L for moorum/red bajri filling in cuttings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering ramming to a true surface of required gradient all as specified and as directed.

M & L for cement concrete 1:3:6 type C-2 using 40mm graded coarse stone aggregates as in foundation filling and mass concrete all as specified and as directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and as directed.

M&L RCC Nominal mix Type B1 1:2:4 (20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces, complete all as specified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified as directed.

M&L Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified as directed.

M & L for Mild steel plain black sheet of thickness 1.6mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and as directed

M & L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed

M&L PCC (1:2:4) Nominal mix Type B-1 (20 mm graded aggregate) as in lintel upto 1.5m span, steps, seismic and other bands, plinth course, string course, lacing course and like including weathering, slightly rounded or chamfered angles complete all as specified and directed.

M&L Mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified as directed.

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick surfaces finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick surfaces finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for preparation of undecorated surfaces of incinerator and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width and girth and applying two coats of synthetic enamel paint over a coat of zinc chromet primer etc complete all as specified and as directed.

M&L for 150mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment over and including 50mm thick crushed stone sand cushioning all as specified and as directed.

M&L for providing precast cement concrete 1:2:4 type B-1 as in kerbs stone using 20mm graded coarse stone aggregates, set in cement mortar 1:4 of size 450mmx300mmx150mm complete all as specified and as directed.

Supply & installation of 16M high mast shaft in two section suitable for 180 Kmph wind speed along with head frame, luminiaries carriage suitable for 08 luminiaries in symmetrical arrangement and other accessories manufactured in factory with raising lowering system comprising double drum winch , 5mm diameter SS wire rope , trailing cable, connector, integral power tool motor, manual handle, junction box, lightining final, , aviation obstruction light , lightning arrester ( wiring material from JB to individual luminiarie & MCB in base compartment are not included and are a part of installation) , with supply of foundation bolts manufactured from special steel along with nuts , washers, anchor plate and common template and outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminairies, power tool control with 2 No 9A contactors and raise lower push button, Incoming 35 Sqmm and outgoing 16 & 2.5 Sqmm terminals. Make : Bajaj,Crompton, Philips, Havells,GE.

HIGH MAST SYSTEM Height of mast : 16 meter No. of section : Two Material Construction : S355 Grade as per BS-EN10 025 Base dia and top diameter ( A/F) : Top : 150mm , Botton : 360 mm Cross Section of Mast : 20 side polygon Standard for Galvanisation : As per BS EN ISO 1461 Size of Opening and door at base : 1200 x 250 mm Diameter of base plate : 670 mm Thickness of base plate : 25mm Lighting protection finial : GI single spike of length 1200mm Max. wind speed : 180 Kmph Number of foundation Bolts : 12 Nos PCD of foundation bolts : 590 mm Type/ diameter/ length of foundation bolts : TS 600/30 mm dia / 850mm long

FOUNDATION DETAILS 1. Excavation dimensions 2800 x 2800 x 1500 mm size 2. Lean concrete 100mm thick ( 1:4:8 ) D2 ( using 40mm graded aggregate) 3. Matt bars 12mm dia TMT Bars @ 200 C/C both ways in double lyers 4. RCC ( 1:1.5:3 ) 2600X2600X300 MM as in footing 5. RCC ( 1:1.5:3 ) 1000X1000X1400 MM ( 1100MM below GL and 300 mm above GL) 6. 8 Nos 16mm dia TMT Bars 4 at corners 4 at centers of pedastal col as main bar with 600 mm long craking at bottom over matt bars . 7. 16 Nos 12 mm dia TMT main bars ( 4 Nos each at 4 side with 600 mm long cranking at bottom over matt bars ) 8. 10 mm dia TMT bars @ 150mm C/C as stirrups 9. 30 mm dia 850 mm long foundation bolts 08 Nos inserted in to 16 mm thick anchoring plate 590 mm dia at bottom with pointed galvanised nut one each at bottom and top of plate . 10. Foundation bolt min clerance 150 mm above pedestal col to rest high mast base plate 25 mm thick over th bolts . Galvanished nuts 01 number at bottom of base plate 2 Nos at top of base plate . Note : The unit rate is inclusive of necessary formwork , RFR , removal of surplus earth , external finishes and other unforeseen items all as directed by Engr-in-charge.

LUMINAIRES CARRIAGE Material Construction : 50 NB ERW Class B-M-S pipe Diameter of carriage ring (mm) : 535 mm (ID) Construction : 08 Arm, Welded, 2 Sections Load carrying capacity : 08 luminaire

TRAILING CABLE Conductor : Copper , 5 core , 2.5 sqmm Insulation : EPR insulated PCP scheathed No. of circuits per mast : One

WINCH / POWER TOOL Type / SWL of winch : Double drum , SWL 750 Kg - SGDD Methode of Operation ; Integral Motor Motor capacity : 1.0 HP ( including suitable starter ) No of speeds : 6 Pole, Single speed Torque Limitor : With Mechanical Tripping Facility

STAINLESS STEEL WIRE ROPE Grade / construction : AISI 316, 7/19 Construction Number of Ropes : Two Continuous Diameter ( mm ) : 6 mm Breaking load capacity : 2350 kg x 2

Supply,lay and testing LT cable XLPE insulated,galvanised steel strip armoured,1100 volts grade with multistranded aluminium conductor of cross-sectional area 35 sqmm; 3.5 core laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing including removing old unserviceable item complete all as specified and directed. Make :- Polycab/ Finolex/ Plaza/ KEI

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm, 4 core laid in trenches/pipe/ducts/walls and making cable connections by providing cable lugs and glands complete all as specified and directed. Make :- Polycab/ Finolex/ Plaza/ KEI

Supply and laying unreinforced precast concrete cable cover, class LV, Type 1, flt, size 250mmx150mmx40mm complete all as specified and directed

Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches upto 23 cm and punning to 18 cm to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for payment purpose.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth; for laying of cables ,protection pipes and foundations etc. and getting out in any soil all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1 using 20mm graded aggregate as in foundtion of pole including form work if required all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded aggregate for coping to poles including form work for ducts all as specified and directed.

Cutting of existing road, concrete/bituminous surface by using of mechanical method of any type complete all as specified and directed (Note:-PCC for making good road surfaces shall be measured and paid separately)

Material and labour for GI pip 80 mm dia "light grade "complete with all fittings laid in trenches,road/culvert crossing,on wall, floors,on roof,on pole, for cable protection complete all as specified and directed . Make :- Jindal/Tata/BST

Supply and fix LED flood light luminaire 120 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. including removing old unserviceable items complete all as specified and as directed by Engineer-in-Charge. Make :Crompton/ Bajaj/ Phillips/ Syska

Supply and fix LED street light fitting 36 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting with and including bracket made out of 1.5m long 40mm dia GI pipe bent to shape required with two nos clamps made out of 32x6mm MS strip with suitable size nuts bolts and washers including two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. Make:- Crompton/Havells/ BAJAJ/Phillips

Supply and fix FRP looping box of size 250x200x105mm with connector and comprising of MCB SP 6 Amps, ISI marked,240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall etc and including removing old unserviceable item complete all as specified and directed. Make:- FRP Box - National/Sintex, MCB- Havells, ABB, Schenider,L&T

Supply, errect and install in true vertical position prestressed cement concrete pole 9.0 metres long, 102x172mm at top and 102x279mm at bottom, class 10 including painting alternate strips of each 30cm with black and yellow synthetic enamel paint upto 1.5m height from coping and the ballance portion of pole shall be painted with two coats of cement based paint. The pole shall be of approved make , all as specified and as directed.

Material and labour for laying of 15mm dia GI tubes light grade with all fittings and fixed complete to wall/ceiling or laid under floors etc complete all as specified and directed.

Material and labour for circuit/ submain wiring using proper colour code with two runs of single core, 1100 volts grade PVC insulated FRLS, ISI marked, unsheathed (flexible) multistaranded copper conductor cable of size 2.5Sqmm and one run of single core, 1100 volts grade, PVC insulated FRLS, ISI marked unsheathed (flexible) multistranded copper conductor of same size drawn through GI pipe recessed etc complete all as specified and directed.