Indian Oil Corporation Limited Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Indian Oil Corporation Limited - IOCL Tender
Paints and Enamels
Eprocure
Opening Date19 Feb 2025
Closing Date12 Mar 2025
Tender Amount₹ 4,55,64,318.28
Technical
Technical
Financial
Class Of Bidder
... View More
Class I Local Supplier, although it's not a strict requirement as non-local suppliers and Class II local suppliers can also participate.
Bid Capacity
... View More
The bid capacity required in the given tender to bid having value and formulas is as follows: - Three similar completed works each costing not less than the amount equal to Rs. 1,61,30,000.00 - Or, Two similar completed works each costing not less than the amount equal to Rs. 2,15,07,000.00
- Or, One similar completed work each costing not less than the amount equal to Rs. 2,68,83,000.00 Additionally, the Annual Turnover during any of the last three preceding financial year, ending 31st March 2024 should be at least of Rs. 3,22,60,000.00. The definition of Turnover is Total Revenue as per Schedule III of Companies Act, 2013. The turnover for this purpose should be as per audited financial statements.
Technical Capacity
... View More
The required prior work experience for the bidder includes:
- Three similar completed works each costing not less than Rs. 1,61,30,000.
- Two similar completed works each costing not less than Rs. 2,15,07,000.
- One similar completed work costing not less than Rs. 2,68,83,000. The value of completed works should be inclusive of all taxes. No specific percentage of similar works completed is mentioned. The bidder must have successfully completed "Structural Repair/Restoration/Renovation of RCC framed building with/without allied works." The RCC framed building should have a minimum of 4 storied or above, or a height of 12 meters or above. Additionally, the annual turnover of the bidder during any of the preceding three financial years should be at least Rs. 3,22,60,000.
Costs
EMD
₹ 1,34,415Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MKTHO_183835_1Tender No
MnC/HR-10/PT-183/24-25Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
National Building code Vol1
National Building code Vol2
Safety Policy for Contract Worker
Special Instructions to the Bidders
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
BOQ Items
... More
JUTE KANTAN (TARAT) SCREEN :-
Providing and fixing Jute Kantan (Tarat) screen to the scaffolding for entire external work execution with proper stitching as directed including removing the same after the work is over etc. complete as per the direction of Consulting Engineer / in-charge.
Note:- The payment will be paid only one time for execution of this items.
15710
71
1121694
... More
SAFETY NYLON NET :- Providing and fixing construction three layer monofilament safety net including first layer of machine knotted 5mm braided Rope with 100 mm x 100 mm mesh size, second layer of knotted 2.5 mm braided rope with 25 mm x 25mm mesh size, third layer of monofilament stabilizer and net with welding / grinding splatter resistance, border rope of 12 mm maximum including the cord of 12 mm maximum at tower corners at 1.50 meter long at every 1.50 meter distance including require size and as per specification and certification approved including testing criteria for safety net EN1263-1 including drop test (dynamic test) and energy absorption test (En-1263-1:2002) with all necessary fixing arrangement to ensure that it remains in position for the entire work duration as per instructions and approved complete as per the direction of Consulting Engineer / in-charge.
1500
809
1213500
... More
WINDOW COVERING :-
Providing and covering windows, doors or other openings with 3 to 4 mm thick new or old Plywood at all levels including securing it properly to avoid damage to the glass panels and to prevent dust entering into flats/units etc. including dismantling the same after completion of the work etc. all complete as per the direction of Consulting Engineer / in-charge.
2930
1023
2999587.5
... More
TEMPORARY PLATEFORM :-
Providing and Fixing TEMPORARY PLATFORM made up of Plywood, G.I sheets, Bamboo etc. supporting with Props to safeguard or protect the AC Units, execution of work, cleaning and inspection of work at required locations and removing it there after etc. complete. Item includes making of temporary support for scaffolding, labour, material, safety devices, etc.,all complete as per the direction of Consulting Engineer / in-charge.
225
473
106627.5
... More
NEW PIGEON NET:-
Providing and installing Nylon net with SS scew for protection from Birds entry in Entrance Lobby with all meterial and labour include as per the directin of Consultng Engineer / in-charge.
1650
224
369600
... More
REMOVAL OF EXISTING CEMENT PLASTER:-
Marking of damaged plaster with colour & marker as per direction of consultants then cutting with grinder machine of entire marked area after that breaking of plaster by breaker machine or manually of any thickness and at all levels inculding cleaning the surface all complete as per the direction of Consulting Engineer / in-charge.
4520
54
246792
... More
REMOVAL OF EXISTING WATERPROOFING:-
Breaking of old waterproofing layer of any thickness by breaker machine or manually at all levels, including cleaning of exposed surface etc. all complete as per the direction of Consulting Engineer / in-charge.
362.25
664
240769.46
... More
CHIPPING LOOSE CONCRETE:-
Chipping of existing loose and damaged cover concrete at specified locations up to the concrete core or as required with chisel and hammer, cleaning the surface with wire brush and washing concrete surface with water etc. all complete as per the direction of Consulting Engineer / in-charge.
569
175
99768.46
... More
LOWERING & CARTING AWAY THE DEBRIS:-
Lowering down the entire debris obtained from breaking and removing the cement plaster/waterproofing, RCC, etc. at any level and location in the premises by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site and carting away the same outside the building compound upto the municipal dump with required municipal permission & all lead and lift complete as per the direction of Consulting Engineer / in-charge.
615
789
485604
... More
II. STRUCTURAL REPAIR
-
-
-
... More
STRUCTURAL POLYMER REPAIR UPTO 15 mm THICKNESS:-
Following methodology will be use for polymer, thickness up to 15mm. 1) Rust Remover
Brushing with wire rush and removing all rust scales from rebars & washing with water as required and providing and applying Rust Remover on existing exposed reinforcement bars
2) R.I. Coat
Providing and applying Rust Inhibition Coat / system to exposed rebars & also new rebars complete.
3) Bond coat
Providing and applying raw Polymer Bond Coat / system to all exposed concrete surface and rebars prior to polymer treatment complete.
4) P.M.M.
Providing and applying Polymer modified mortar in ratio 1:5:15 (1 part by weight of polymer: 5 parts by weight of cement: 15 parts by weight of Quartz sand) up to 25 mm thickness all complete as per the direction of Consulting Engineer / in- charge.
455
2321
1056305.25
... More
STRUCTURAL POLYMER REPAIR 15-30 mm THICKNESS:-
Following methodology will be use for polymer, double layer thicken up to 20 mm
1) Bond coat
Providing and applying raw Polymer Bond Coat / system to all exposed concrete surface and rebars prior to polymer treatment complete.
2) P.M.M.
Providing and applying Polymer modified mortar in ratio 1:5:15 (1 part by weight of polymer: 5 parts by weight of cement: 15 parts by weight of Quartz sand) up to 20 mm thickness all complete as per the direction of Consulting Engineer / in- charge.
113
1544
174534.15
... More
MICRO CONCRETE:-
Providing encasement to columns / beams /Pardi etc., with free flow high strength non-shrink micro concrete M - 35 of any approved brand. The water cement ratio should be maintained as per manufacturer's specifications to achieve dense solid mass. The Micro concrete shall be poured properly in slurry tight prefixed holding boards’ formwork, fixed properly in line, level and in the required size/shape and well-oiled etc. The air bubbles, if any shall be removed by tapping the boards and removing the same after 24 hours, curing the micro-concrete thoroughly for 07 Days etc. complete. The rate shall be inclusive of shuttering, curing, bondcoat etc. complete. (Excluding cost reinforcement) etc. complete as per the direction of Consulting Engineer / in charge.
31047
41
1272927
... More
NEW REINFORCEMENT STEEL:-
Providing, fabricating, welding & fixing steel reinforcement (Fe500) in existing damaged reinforcement in RCC as required Dia of approved brand i.e. TATA/SAIL or equivalent. For column, beams & slab. Etc. including transporting the same to site, cutting, bending, tying at all heights and in all positions, providing concrete covers as required at any height etc. Rates to include MS/TS dowel pins /staple/shear pins including drilling holes in concrete and providing labour and materials for fixing the pins etc. Complete as per the direction of Consulting Engineer / in-charge.
1
98842
98842.8
... More
III. CIVIL REPAIR WORKS
-
-
-
... More
EXTERNAL SAND FACE PLASTER:-
Providing sand face plaster externally in two coats using approved screened Gujarat river sand/ brown sand in all positions, including providing base coat of 15mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kg./ 50 kg. of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 10 mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing including preparing the surface, watering, making patta, grove etc. complete as per the direction of Consulting Engineer / in-charge.
2037
670
1366725.15
... More
DASH COST:-
Repairing the damaged surface with an application of Dash coat of 1:4 cement mortar and inserting brickbats or metal chips to level the surface complete. All complete as per the direction of Consulting Engineer / in-charge.
720
300
216324
... More
SEPERATION JOINT FILLING :-
Providing & sealing separation cracks between RCC and brick work by cutting grove on both sides crack along the length by electrically operated groove cutter Breaking / removing plaster & loose mortar (up to 75mm depth) in the area between two grooves by chiseling. Washing by drinking water to make it dust free surface. Hammering 10 to 20mm size aggregates in the crack as directed by the consultant. Sealing the crack with Ready mix polymer modified cementations Mortar 9 Up to 50mm depth in two layers all Complete as per the direction of Consulting Engineer / in-charge.
620
315
195300
... More
INTERNAL PLASTER:-
Providing and applying internal plaster in single coat in CM 1:4 up to 15mm thickness including surface prepration and covering the floor and other area as required with proper cleaning etc. complete as direction of Consulting Engineer / in charge.
2482
600
1490689.2
... More
INTERNAL PLASTER BIRLA PUTTY:-
Providing and applying 6 mm thick Birla white or equivalent finish at all heights and locations inculding sanding, finishing etc. complete as direction of Consulting Engineer / Incharge.
2980
370
1102600
... More
IV. WATERPROOFING
-
-
-
... More
TERRACE WATERPROOFING:-
Providing and laying integral cement based waterproofing treatment to Terrace & Overhead room Top upto 112 mm thickness including preparation of surface as required for treatment of roof, balconies, terraces etc. consisting of following operations: A) Cleaning the surface & making free from looses particles, filling the cracks on slab, applying waterproof chemical in two coats on the terrace slab as per the specifications of Manufacturer. B) Laying brickbat coba using old broken brick/brick bats 25mm to 100 mm size with cement mortar upto 50% 1:5 (1cement: 5 coarse sand) admixed with proprietary waterproofing compound conforming to IS: 2645 over 20mm thick layer of cement mortar mix 1:5 (1 cement 5 coarse sand) admixed with proprietary waterproofing compound conforming to IS: 2645 to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junction of walls and slabs. C) After two days of proper curing providing & laying IPS in C.M 1:4 i/c roughening the surface to receive China Mosaic Guarantee against leakproofness for 10 years on stamp paper of Rs. 100/-
1297
1472
1909287.76
... More
CHINA MOSAIC ON TERRACE WATERPROOFING:-
D) P/L china mosaic in CM 1:4 cleaning with saw dust all complete i/c ponding the entire terrace for 07 days etc. complete as per the direction of Consulting Engineer / in-charge.
1297
1347
1747059
... More
CHAJJA, PUMP ROOM, LIFT ROOM & WATER TANK TOP WATERPROOFING:-
Providing & laying Waterproofing Treatment to chajja Top upto required thickness including preparation of surface as required, waterproofing procedure consisting of following operations: A) Cleaning the surface & making free from looses particles, filling the cracks on slab, applying waterproof chemical in two coats on the terrace slab as per the specifications of Manufacturer. B) Laying brickbat coba using old broken brick/brick bats 25mm to 100 mm size with cement mortar upto 50% 1:5 (1cement: 5 coarse sand) admixed with proprietary waterproofing compound conforming to IS: 2645 over 20mm thick layer of cement mortar mix 1:5 (1 cement 5 coarse sand) admixed with proprietary waterproofing compound conforming to IS: 2645 to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junction of walls and slabs. C) After two days of proper curing providing & laying IPS in C.M 1:4 i/c marking lines to give appearance of tiles of 30cm x30cm or other size laid diagonally/square, ponding the entire area for 07 days etc. complete as per the direction of Consulting Engineer / in-charge.
1150
2080
2392057.5
... More
V. PLUMBING WORKS
-
-
-
... More
PROVIDING AND FIXING PVC PIPE :-
Removing Existing Plumbing Lines & Providing and fixing new B Class of approved make PVC pipes after removing the existing plumbing lines, inculding required sealing the joints with lead with all fittings and Nails, cutting (Gabbda) holes in walls and remaking good with WP coating on the demolished portion and GI bracket 2" away from the wall with nails etc. complete as per the Direction of Consulting Engineer / In-Charge.
NOTE: Rate including the provision of temporary plumbing lines during the execution. and all the old unuseble material store at one place should be handover to IOCL.
-
-
-
... More
110mm W/C LINE PVC:-
Providing and fixing 110mm dia B Class P.V.C. waste pipe with necessary fixtures and fitting such as plug bends, plug tees, single junctions filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs. for any leakages or dislocations of pipes, etc. complete.
640
827
529536
... More
110mm RAIN WATER LINE PVC:
Providing and fixing 110mm dia B Class P.V.C. Rain Water pipe with necessary fixtures and fitting such as plug bends, plug tees, single junctions filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs. for any leakages or dislocations of pipes, etc. complete.
608
597
363249.6
... More
75mm BATH LINE PVC:-
Providing and fixing 75mm dia B Class P.V.C. waste pipe with necessary fixtures and fitting such as plug bends, plug tees, single junctions filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs. for any leakages or dislocations of pipes, etc. complete.
935
637
595922.25
... More
FIXING NEW UPVC SCHEDULE 80 PIPE:-
Providing and fixing the new UPVC Schedule 80 pipes of approved brand with all temporary line & necessary fittings to terrace loop line and also down take lines, inculding required sealing the joints with lead with all fittings and Nails, cutting (Gabbda) holes in walls and remaking good with WP coating on the demolished portion and GI bracket 2" away from the wall with nails etc. complete as per the Direction of Consulting Engineer / In-Charge. NOTE: Rate including the provision of temporary plumbing lines during the execution. and all the old unuseble material store at one place should be handover to IOCL.
-
-
-
... More
25mm DIA CPVC PIPE:-
Providing and fixing on walls/ ceiling/floor 25 mm dia. CPVC pipe with necessary fittings, cutting holes, remaking good the demolished portion etc. complete. Including removing existing pipe line & conveying and stacking the same as directed etc. complete.
780
444
346437
... More
20mm DIA CPVC PIPE:-
Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
540
325
175770
... More
15mm DIA CPVC WATER PIPE:-
Providing and fixing on walls/ceiling/floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
525
279
146632.5
... More
40mm DIA CPVC LOOP LINE:-
Providing and fixing on walls/ceiling/floor40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
463
565
262034.85
... More
25mm DIA CPVC LOOP LINE:-
Providing and fixing on walls/ ceiling/floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
463
393
182306.25
... More
50mm DIA UPVC MAIN SUPPLY LINE:-
Providing and fixing on walls/ceiling/floor 50 mm dia. UPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
185
758
140248.5
... More
WALL PIECE:-
Providing and fixing new Wall Piece of required sizes with all necessary fittings after removing the existing lines, filling the joints, providing PVC sleeves on top, cutting holes in external walls complete as per the direction of Consulting Engineer / in-charge.
420
780
327600
... More
G.I BRACKET :
Providing and fixing G.I. Brackets as required size for PVC & UPVC pipes with U Bolt complete as per the direction of Consulting Engineer / in-charge
3426
350
1199100
... More
GATE VALVE 40mm :
Providing and fixing gun metal gate valve with C.I. wheel of approved barand of 40 mm nominal bore complete Or as directed, etc.
6
1691
10146
... More
GATE VALVE 25mm :
Providing and fixing gun metal gate valve with C.I. wheel of approved barand of 25 mm nominal bore complete Or as directed, etc.
74
766
56684
... More
VI. PAINTING WORK
-
-
-
... More
EXTERNAL SYNTHETIC TEXTURE:
Cleaning the surface (either newly plastered or old surface) by stiff brush/ wire brush, or by any other special method as directed, by Pressurized water-jet, opening of cracks as directed, crack-filling by approved Non-shrink grouts & as per approved specifications, including cost of scaffolding.
P/A Coating system of basic layer of Textured acrylic material having thickness of at least 2 mm applied in a single layer over a base coat of approved primer, as per approved scheme & type, as per detailed specifications, including cost of scaffolding.
The system shall be manufactured & guaranteed by a reputed & approved manufacturer.
complete as per the direction of Consulting Engineer / In-charge.
20368
314
6395552
... More
EXTERIOR ELASTOMERIC BASED PAINT:
Providing & Applying over the texture one coat of base coat & two coats of Elastomeric waterproofing base Paint of approved brand having 5 years guarantee of approved make / shade at all heights and using as per the manufacturer’s specifications, The factor for measurements shall be 1.5 on all surfaces such as sand face plaster (Old or New), Textured coating, smooth finish plaster, etc. complete as per the direction of Consulting Engineer / In-charge.
31226
309
9672253.5
... More
STAIRCASE PAINTING:-
Providing and applying first single coat of approved primer and two coats of acrylic paint of an approved make and colour as per manufacturer’s specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge.
1247
147
183309
... More
REMOVING OLD PAINT FROM STEEL:
Removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete as per the direction of Consulting Engineer / In-charge.
2942
20
58840
... More
OIL PAINT ON OLD/NEW STEEL:
Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturer’s specifications to the steel surfaces at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as per the direction of Consulting Engineer / In-charge.
2942
170
500140
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%