Directorate Of Municipal Administration Tender

Item No.4 Providing earthwork in embankment with approved materials obtained from other sources upto lead of 50m.including all lifts,laying in layers of 20cm.to30cm.thickness breaking clods,dressing to the required lines,curves,grades & section,watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97%of standard proctor density etc.complete (Materialobtainedfrom Other sources)

Item No. 5 - Supplying 80 mm trap stone metal at the road side for metal including conveying & stacking etc. complete. ( 50 m initial lead ) ( excluding royalty) By breaking boulders ( hand broken) RA No- 1

Item No. 6 - Supplying 40 mm trap stone metal at the road side for metal including conveying & stacking etc. complete. ( 50 m initial lead ) ( excluding royalty) By breaking boulders ( hand broken) RA No- 2

Item No. 7 :- Supplying soft murum at the road site,including conveying and stacking complete

Item No.8 :- Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge .

Item No. 9 - Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Item No. 10 - Compacting 80mm oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.

Item No. 11- Compacting 40mm size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.

Item No. 12 - Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc.complete.

Item No. 13 - Providing and constructing 75mm.thick Modified Penetraction Macadam (MPM) road surface including all materials,preparing the existing road surface,spreading 40mm.stone layers metal 30%crusher broken metal+70% Hand broken metal(By breaking Rubble obtained by blasting),heating and spraying the bitumen of specified grade @2kg/sqm,spreading12mm.size chips compacting with three wheel static roller having weight 8to10MT.to achive the desire ddegree of compaction asperTechnical Specification Clause 506 etc.complete,Excluding tack coat of specified grade of bitumen at therateof 0.30KgSqm.on existing bitumen surface.(VG-30 bulk bitumen rates are considered to arrive at rates)

Item No.14 :-BITUMINOUS MACADAM:--Providing and laying bituminous macadam using crushed aggregate of Grading 1, premixed with bituminous binder, transported at site with VTS, laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 80/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27 2009 specified conditions and attachments such as electronic load sensor based belt conveyers,automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc.complete --Bitumen 3.30% of specified grade (VG-30 bulk bitumenrates are considered to arrive at rates)

Item No.15 :-BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen VG-30 grade with stone dust filler

Item No. 16 - Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 600mm diameter in proper line, level and slope etc. complete.

Item No : 17 - Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade.

Item No :18 - Royalty charges for various materials

HB metal

Item No : 19 - Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Mumbai.