Department Of Electronics And Information Technology Tender

Providing and fixing Motion Mid back office chair with suitable caster wheels,Contact-Tilt Mechanism ,Seat Height Adjustable, Adjustable armrest, Mesh back fabric, lumbar back support. Finish colour–Black. PU foam cushion seat.The OEM should be BIFMA Certified.(Refer drawing section) Note- 1) The chair should be from the same OEM of modular workstation 2) The chair is required with cushion seat assembly consists of seat base moulded in glass –filled ply-amide moulded in HR Polyurethane foam density 45±2kg/m3

Providing and fixing Hi- Back Motion Mid back office chair (for HOD Cabin )with suitable caster wheels,Contact-Tilt Mechanism ,Seat Height Adjustable, Adjustable armrest, Mesh back fabric, lumbar back support. Finish colour–Black. PU foam cushion seat.The OEM should be BIFMA Certified.(Refer drawing section) Note- 1) The chair should be from the same OEM of modular workstation The chair is required with cushion seat assembly consists of seat base moulded in glass –filled ply-amide moulded in HR Polyurethane foam density 45±2kg/m3

Providing & fixing Gain storage unit -2100 H x 500 W x 500 D with metal door, Lock & key. The gain storage unit should be CRCA (0.8 mm) power coated, colour of powder coating should be as approved by client.The OEM should be BIFMA Certified.(Refer drawing section)

Supply and installation of HOD/ Executive Table :Main Desk+ ERU+ Mobile Pedestal Unit. Main Desk:- 1800 mm X 900 mm Mobile Pedestal: 510 w X 445 d X 635 h Mobile Side Unit(ERU): 1200w X 445d X 645h The OEM should be BIFMA Certified.(Refer drawing section) Note: Main desk-To be Veneer finish, leather pad on the desk, Wire management

Installation of Godrej workstation which was already procured by C-DAC and stacked on the 1st floor of the C-DAC IP building. The scope of work includes- 1) Lifting & shifting of the Godrej workstations parts from 1 st floor to the north wing of 2nd floor of the building. 2)Installation of workstation including supply & installation of any consumables required to make the workstation complete as per the approved layout/ drawing.

Providing & Fixing in position Acoustical partition , partly laminated partly glaze ( finished in laminate on both the sides for part area and toughened glass 12mm thk. as per design) Acoustical partition made from 12mm w p Plywood & 1mm laminate on both side, 50x50mm teak wood of 600x600c to c having teak wood supports from wall of required length, in front of 1000 Gsm synthetic wool 50mm thick including cost of required Cut-Outs, decorative mouldings/ finishing-items / pain & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour, finishing etc complete. Laminate to be of Merino(Micro line) range. (Note : Frosted glass film matching with existing pattern has to be provided by vendor only)

Providing and fixing 12mm toughened glass door with required fixtures and fittings like floor mounted spring, Handles and frosted films matching with existing pattern etc completed

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.6, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 31 %. The tile shall be laid on precoated G.I channel height of 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out strength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system, etc. complete

Supply & fixing of ManagerTable ( Table size 1200x 600mm) matching with existing pattern (Refer drawing section) Table of Three layer prelaminated particle board(Wood Product) of IS 12823/Latest 1)Table top Material-Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest 2)Leg Material-NO LEGS 3)Thickness of table top ±2 mm25 millimeter 4)Length of table top ±10 mm1500 millimeter 5)Depth of table ±10 mm750 millimeter 6)Height of table ±10 mm750 millimeter 7) Product shall be ISO 9001:2015, ISO 14001:2015, ISO 18001:2007 certified 8)Frame type- Free standing 9)Understructure of table- Gable end and modesty panel 10)The OEM should be BIFMA Certified. 11) The table should be with matching laminates colour pattern with adjacent tables.

Supply and fixing of Pedestal Unit of 646x390x440 mm matching with existing pattern (Refer drawing section) Construction & Material- 1)Welded Assembled The material of pedestal shall be CRCA sheet of minimum 0.8 mm (Bottom & body shell thickness), stiffener -1.2 mm, Drawer front – 0.6mm in powder coated finish ( seven tank process)as per approved colour. Drawer Specification- 1)All Drawers with Double extension precision ball slide 2)390 wide Pedestals File drawer - suitable for storing Fullscape files in Depth wise manner. A4 files in width wise manner 3)450 wide Pedestals File drawer - suitable for storing Fullscape files in Width & Depth wise manner. A4 files in depth wise manner 4)In 585 deep units, 1 no of File hanger provided in File Drawer 5)For Drawer pulling, side wise tapered recess provided in shell behind Drawer Fronts. Locking- 10 lever Cam Lock & Central RH locking with actuator & lock channel mechanism for ‘Box-Box-File’ & ‘4 Box’ Pedestals 6)The OEM should be BIFMA Certified. • Swiveling non-lockable Castors mounted below the body shell

ELECTRICAL AND ALLIED WORKS

Supply & Installation of concealed / ressessed RAW/UPS point wiring using 600V 3R (P+N+E) x 1.5 Sq.mm copper conductor PVC insulated wires (with proper R,Y,B color code) pulled through already laid PVC raceway on walls and through table partition including 3R (P+N+E) x 2.5 Sq.mm circuit wires from the relevant DB and also including 2.5 sqmm green color copper earth wire and approved make modular type switch plate, switches, MS concealed back box, etc. as required & as approved by the consultant. (The item rate shall include Lighting / Raw / UPS Power Circuit wiring from relevent DB to the switch board with 3Rx2.5 Sq.mm wires & from switch board to next switch board OR to the first light point / primary point / full point) NOTE :- 1. Only PVC insulated wire shall be used; 2. Conduit carrying circuit wiring should not carry point wiring and Conduit carrying point wiring should not carry submain/circuit wiring; 3. Flexible conduits & Elbows are not allowed; 4. The wires from ceiling junction to light points / light fixture shall be drawn in flexible PVC conduit/Cassing caping with adptor & cover for junction box & crimp type lugs at both the ends alongwith necessary hardware & accessories, etc. as required; 5. Proper ferrules, lugs, must be used in all cabling and wiring on both load / source end; 6. Each switch board must be provided with respective ferrules representing the respective DB, Phase & Circuit numbers; 7. Looping of Neutral / Earth wire between two seperate Primary / Full Points is strictly not allowed; 8. Looping of Neutral / Earth wire between two seperate circuits on similar or other phase is strictly not allowed; 9. Ferulling / numbering / taggning to wires with circuit number & db name for all lighting & raw / ups power shall be strictly followed at both DB & switch board / switch socket boards ends.

Supply & Installation of primary point wiring for UPS or stabilized power plug points on workstations / table for computers using 3C X 2.5 Sqmm copper conductor PVC sheathed white color flexible cable pulled through already laid Surface PVC Box raceway and table/workstation partition raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions. Each point consisting of 2 nos of 5A , 3 pin sockets above table top/bottom & 2 No of 10A CONTROLLING Switch , wired together forming one point. The earth wire of 3 core flexible cable to be of yellow-green color only.

Supply & Installation of Secondary point wiring for UPS or stabilized power plug points on workstations / table for computers using 3C X 2.5 Sqmm copper conductor PVC sheathed white color flexible cable pulled through already laid Surface PVC Box raceway and table/workstation partition raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions. Each point consisting of 2 nos of 5A , 3 pin sockets above table top/bottom & 2 No 10A CONTROLLING Switch , wired together forming one point. The earth wire of 3 core flexible cable to be of yellow-green color only. ( Maximum 2 no.s point to be looped from each primary UPS point )

Supply & Installation of primary point wiring for RAW power plug points on workstations / table for computers using 3C X 2.5 Sqmm copper conductor PVC sheathed white color flexible cable pulled through new Surface PVC Box raceway and table/workstation partition raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions. Each point consisting of 2 nos of 5A , 3 pin sockets above table top/bottom & 2 No of 15A CONTROLLING Switch , wired together forming one point. The earth wire of 3 core flexible cable to be of yellow-green color only.

Supply & Installation of Secondary point wiring for RAW power plug points on workstations / table for computers using 3C X 2.5 Sqmm copper conductor PVC sheathed white color flexible cable pulled through already laid Surface PVC Box raceway and table/workstation partition raceways and taken upto table top using PVC rigid or flexible conduits run within wooden/metal partitions. Each point consisting of 2 nos of 5A , 3 pin sockets above table top/bottom & 2 No of 15A CONTROLLING Switch , wired together forming one point. The earth wire of 3 core flexible cable to be of yellow-green color only. ( Maximum 2 no.s point to be looped from each primary UPS point )

DATA NETWORKING

Supply & Installation of Modular Data point including approved make Cat - 6 UTP cable through already laid trenches, and new flexible conduit in table partition ,RJ45 information outlet face plate, etc. with Termination, Testing and Documentation of UTP Points complete as required.(D-Link or equivalent)

Supply of mounting patch cord (3 feet')

Supply of mounting patch cord (7 feet')

Supply & Installation of Fully Populated 24 Port Cat 6 Jack panel (D-Link or equivalent)

VOICE/TELEPHONE NETWORKING

Supply & Installation of Telephone /Voice point including approved make Cat - 6 UTP cable through already laid trenches / conduits, RJ11 information outlet, in single face plate, in workstation partition wall etc. with Termination, Testing and Documentation of UTP Points complete as required.

Supply & installation of PVC trunking of 100 x 40 mm size

Supply & Installation of concealed / ressessed 5/15A RAW point : 5/15A MODULAR switch socket using 3 x 2.5 Sq.mm copper Flexible conductor PVC insulated wires in PVC conduits pipe of 25/20mm dia. concealed in wall (including Chiesling in wall) and or through partitions with necessary boxes, Ceiling rose, 5/15A modular type switch, and socket mounting plate and concealed Metal Box and proper clamping complete.(DB TO POINTS)