Department Of Electronics And Information Technology Tender

INTERIOR WORK

Modular Linear Workstation of Size 1200(L) X 600(W): Supply and installation of above workstations with minimum 70mm thick 1200 mm high panels as partition (Sample Drawings are attached). With combination of two separate metal raceways for data and power at bottom, two intermediate fabric blocks ,top tile-white board ,fabric magnetic. The 25 mm thick Pre-laminated particle board support for top resting at both end of workstation shall be provided. The table should be complete with suitable keyboard holder tray.The cutouts for 6 Module for power ( 2no’s)and 2 Module ( 1nos) for network point has to be there. The cable grommets should be there on table top for routing of power and data cables. The sample shop drawing has to be approved by client before delivery. The OEM should be BIFMA Certified.(Refer drawing section) Note:- 1) Material of table top:-Worktop should be made of 25mm thick Pre-laminated particle board. 2) Material for tiles for top: Fabric magnetic (over GI sheet) plus white board 3) Material of bottom tile:Metaltile (GISheet) 4) Plain edge banded with 2mm PVCtape

Supply and installation of Top supporting pedestal with flat metal front of total Size 390w x 585d x 725ht (Including leveler), 3dr=2box +1file, central locking.The OEM should be BIFMA Certified.(Refer drawing section) Note- 1) The top supporting pedestal should be from the same OEM of modular workstation. 2) The material of pedestal shall be CRCA sheet of minimum 0.8 mm (Bottom & body shell thickness), stiffener -1.2 mm, Drawer front – 0.6mm in powder coated finish ( seven tank process)as per approved colour.