Bhabha Atomic Research Centre Tender

230 to 749 mm wide at bottom

750 to 2000 mm wide at bottom

CLEANING OF COVERED STORM DRAINS: Removing of silt, dry leaves, murrum, small boulders etc. completely from the bed of closed drains with RCC / CI grating, box culverts etc. having depth not beyond 2.5 mts. and disposing the removed earth & debris within a lead of 50mts. including removal and putting back the RCC / CI grating properly as required during the entire monsoon / non-monsoon period and as directed by EIC.

CLEANING OF GULLY TRAPS: Cleaning of Gully Trap / Gully Chambers and stoneware pipes upto adjoining Inspection Chamber and CI pipes from Nahani trap to Gully trap. The rates are inclusive of removing and refixing CI cover of Gully Trap / Gully Chambers.

CLEANING OF STORM CHAMBERS: Removal of silt, dry leaves, mud, soil, grass, debris, etc. from storm water collection chambers manually after removing C.I. covers & re-fixing the covers at proper location including disposal of retrieved material to a lead of 500 mts., at CT&CRS building.

CLEANING OF INSPECTION CHAMBERS, MANHOLES OF SEWAGE LINE: Cleaning of Sewage Manholes / Inspection Chambers of canteen, toilets, sewage line etc. carefully by mechanical means or with sewage cleaning tools complete all as directed by EIC. Pipe in between chambers will be measured seperately. The rates are inclusive of removing muck, solids and disposing the same beyond 2 km distance. Pumping arrangement for water is to be made by contractor at his own cost. The rates are inclusive of pumping as required if any.

CLEANING OF SEWAGE PIPE LINE: Cleaning and removal of sewage or drainage wastes, muck etc. from horizontal, sloping RCC/CI/PVC lines of all dia. (burried underground/under roads/exposed) connecting to sewage inspection chambers, manhole chamber etc. by mechanically / manually as desired by EIC including cost of labour, tools, machines, transportation etc.

CLEANING RCC PIPE STORM DRAIN: Cleaning of existing storm water Hume Pipe lines of different diameters / pipe culverts and at all locations such as road, berms/ lawns, buried inside the building etc. which are partly or fully filled with silt, small boulders, dry leaves, grass, etc. by disposing the removed debris within a lead of 50 mtrs and as directed by the EIC. upto 450mm dia

CLEANING JUNGLE: Clearing Jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared as per specifications and as directed by the EIC.

SURFACE DRESSING: Surface dressing of the ground including removing vegetation and in levelling not exceeding 15 cm deep and disposal of rubbish at a lead up to 50 M in all kinds of soil complete as per specifications and as directed by the EIC.

TRIMMING THE BRANCHES OR CLEARING THE SITE OF FALLEN TREE: Trimming the branches or clearing the site of fallen tree of girth measured at a height of 1 m above ground level including trimming of branches or cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable materials complete as per specifications and as directed by the EIC.

Girth more than 30cm & upto 60cm

LEAD CHARGES FOR LEAD UPTO 4 KM: Lead charges for lead exceeding 3 km but not exceeding 4 km by mechanical transport including loading, unloading, stacking, levelling etc. (Note: The rates in respect of Item are applicable for NET Quantities arrived at after making deduction for voids @ 30% from corresponding TRUCK Measurement). Note: Transporting of debris at disposal ground, disposing , stacking, leveling & statutory charges if any will be responsibility of the Contractor and no extra charges shall be paid for the same.

Debris Beyond 3 km but upto and including 4 km

EARTH WORK EXCAVATION by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge (a) From 0.00 to 1.50m depth from Average Ground Level.

Providing and laying in position CEMENT CONCRETE OF 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels.

Providing and laying in position CEMENT CONCRETE OF 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels.

Providng and fixing at or near ground level PRECAST CEMENT CONCRETE 1:2:4 IN KERBS, Using 100% manufactured sand, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using coarse sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using fine sand) on exposed surfaces complete as per specifications.

Providing safety Personnel Protective Equipments (PPEs) for engineers, supervisors and workers including transportation, delivery, storage in good condition ,maintaining issue records etc. as instructed by Engineer in-charge. Note: All the items issued for use shall be handed over to the department on completion of the work. Note : Tentative / suggested make for the guidance of the bidder(s) : M/s Udyogi Plastics make or equivalent make

Safety helmet of Thermoguard 9000 Series, TG4 RXFRP Helmet material-Proprietary injection molded fibreglass compound suspension,4 point textlie with rachet fit adjustment,adjustable chin strap,high quality sweat band,size 53-60 cm conforming to IS:2925:1984,ISI marked and of approved color. Note : Tentative / suggested make for the guidance of the bidder(s) : M/s Udyogi Plastics make or equivalent make

Safety shoe- as per IS:15298 Part 2 or EN 345

Full harness safety belt - conforming to EN 361 (IS:3521-1999) with twin braided rope lanyard having scaffolding hooks .

Ear muff- lightweight with adjustable ear cup as per IS:6996 ‐1973(Reaffirmed 1998) or EN 352‐1:2002

Hand Gloves - with 2 Thread Poly-cotton premium quality cotton as per IS:4770–1991 (Reaffirmed 2001)

Safety jackets - reflective jacket with fluroscent colour( green, yellow, orange) ,made of 110 gsm 100% Cotton Fabric

Safety goggles - with 180° field of vision of optical Class-1 meeting safety standard ANSI Z 87.1 High Impact Standard, CE Marked, conforming to EN 166 or IS 5983 (Reaffirmed 2002)

Refill for safety helmets - For safety Helmets -Fusion 6000 series Note : Tentative / suggested make for the guidance of the bidder(s) : M/s Udyogi Plastics make or equivalent make

Refill for safety helmets - For safety Helmets of Thermoguard 9000 Series Note : Tentative / suggested make for the guidance of the bidder(s) : M/s Udyogi Plastics make or equivalent make

Supplying and installing First Aid Kit containing items as follows:- Note: (1) Each first aid box or cupboard shall be distinctly marked with the sign of Red Cross and with the words "FIRST AID" and nothing except appliances or requisites of first aid shall be kept in it. (2) The items in First Aid box should be as per BOCW Act & Central Rules - 1998 and BARC Construction safety Manual for Works Contract - 2011 [BARC/2011/E/006] available on BARC website(Tenders and NITs). Note : Tentative / suggested make for the guidance of the bidder(s) : M/s Udyogi Plastics make or equivalent make

FIRST AID KIT of MEDIC 2500 Series of High-Viz Orange color ,28X20X11.5 CM size,complying Standards OSHA/ANSI Z308.1-2009 Type III or Indian Factories act - Class 1/Type A - For 25 Persons. 1) First Aid Guide Book-1 No. 2) Scissors-1 No. 3) Wound Cleaning Antiseptic wipes-10 Nos. 4) Tincture -Povidone Wipes - 10 Nos. 5) Cotton Wool 15 Gm - 1 Nos. 6) Adhesive Plaster-Small - 1 No. 7) Small Sterilised Elastic dressing -3 Nos. 8) Medium Sterilised Elastic dressing - 3 Nos. 9) Large Sterilised Elastic dressing - 3 Nos. 10) Large Sterilised Elastic Burn dressing - 2 Nos. 11) Sterilised Eye Padin sealed packet (Dressing) with elastic dressing roll -2 Nos. 12) Eye wash pods - 1 No. 13) Triangular Bandage - 1 No. 14) Roller bandage Elastic-Large 10 cm wideX 2 Mtr - 1 No. 15) A snake bite lancet - 1 No. 16) Burn Ointment - 1 No. 17) CPR Mask - 1 No. 18) Instant Cold Pack - 1 No. 19) Adhesive Bandages - 8 Nos. 20) Muscle relaxent Ointment - 1 No. 21) Gauze Pad-5 CM - 2 Nos. 22) Gauze Pad- 7.5 CM -1 No.

MAINTENANCE OF MONOBLOCK PUMP SETS (DEWATERING PUMPS) of capacity 0.5HP / 1.0HP/ 1.5HP utilising for Monsoon Emergengy Response and as directed by Engineer-in-Charge.

Maintenance including oiling, greasing, cleaning etc. as & when required.

Overhauling of Motors / Starters

Providing and fixing PRECOATED GALVALUME ROOFING PROFILE SHEETS (0.50mm Thickness in Single Sheet) of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge.

Cleaning of carpets, wall panels and chairs of auditorium by removing the dry dust using heavy duty vacuum cleaner, removal of stains using Taski 101 or approved equivalent chemical, upholstery shampooing and scrubbing, drying by suction using extraction machine all as per manufacturer's specification and as per the direction of Engineer-in-charge.

Carpets

Wall panels

Chairs

SUPPLYING MAN POWER IN MONSOON: Supplying man power along with necessary pans, spades, shovels, pickaxe, punjas, ropes, small special spade, raincoats, safety shoes, etc. @ two labours per day upto maximum any number of labour as and when decided by EIC to work for 08 hours per day/night in monsoon period to carry out the cleaning of choked drains / grating grills / hume pipes / footpath by removing the dry leaves, silt etc. and also carry out seasonable departmental work allotted by EIC from time to time.

Carrying out Civil Engineering works like surveying & leveling, checking of form work fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Notes : (1) Each Job shall be carried out by one qualified Technician having minimum SSC with Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of not less than one year duration from ITI/Government Recognised Vocational Training Institute or experienced Technician retired from Government service. (2) Deployment: The contractor shall deploy one Technician for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in -Charge. (4) Mode of measurement : Measurement will be per job basis per day. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Technician will report to BARC Engineer/ EIC. (6) The minimum notice period before change of technician is 1 (One) month; failing which a compensation, for not providing technical support, of Rs. 1,206/- per day of shortfall in notice period will be levied on the contractor.