Bhabha Atomic Research Centre Tender

Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs and including aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification. Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site

Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge.

Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections

Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters.

Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters.

Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc.complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)

With clear float glass panes of 5.00 mm thicknes

Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.

Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration

Providing and Painting with Epoxy PU paint using 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of 50 micron thickness over steel surfaces at all locations prepared and applied as per manufacturer' specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat). On STEEL surfaces Tentative/ Suggested make/model of epoxy primer for the guidance of bidders: EPILUX-13 of M/s Berger Paints.

Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge

Upto and including 300mm Joists, 350mm channels, and below sections using materials of approved manufacturers. All test reports to be provided along with the supply of the materials.Material Shall conform to IS 2062:2011.

Providing and Fixing in position 6 mm thick solid clear (Translucent) Polycarbonate sheet of approved make including cutting, fixing on existing supports by replacing damaged panels and sealing the joints with silicon sealent with necessary stainless steel fastners, scafffolding if necessary complete all as directed by Engineer in charge. Note : Aluminium section / strip will be paid in relevant item.

Providing and laying in position cement concrete of 1:1:2 at all levels (1 cement, 1 crushed sand, 2 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.complete all as per specifications but excluding the cost of Formwork shuttering, centering and steel reinforcement complete as per specifications and drawings at all levels

Providing and constructing Random Rubble masonry using approved Rubble stone in super structure (above plinth) in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing above ground level / plinth level and up to and including 20 m height including scaffolding, curing etc. complete as per drawings and specifications.

Labour charges for dry stone pitching 22.5 cm thick by using good soling stones available at site, preparing the surface complete.

Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge (a) From 0.00 to 1.50 m depth from Average Ground Level.

Providng and fixing Aluminium Grill 10 mm thick in natural Silver anodising of min 15 microns with a opening size of 120mm x 75mm and minimum weight of 2.64 Kg/ Sq.M including providing and fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in charge Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg / sq.mm. Tentative/Suggested make/model of aluminium grill for the guidance of the bidder: "DECO GRILLE" make Model No. DG- 117.

Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge

SWR PIPE 90 mm O/D

Providing and fixing 1 hour fire rated metal framed partitions of non load bearing type (98mm over all thickness) using floor / ceiling channels of 50 x 32 x 32 x 0.55 mm size at top & bottom perimeter of the partition and studs of 48 x 50 x 48 x 0.55 mm vertically at maximum of 610 mm centre to centre and bracing members of 45 x 15 x 15 x 0.90 mm at horizontal at all board joints with 12 mm thick calcium silicate board on both sides with self drilling screws to metal frame at 200 mm C/C Over the calcium silicate board fillet of 12 mm metal frames & studs . All cavities in the partition shall be filled with mineral wool of 50 mm thick of densisty 48 Kg / Cu.M. All joints shall be filled & finished with calcium silicate board joining compound and 48 mm wide fiber tape to get seamless finish. A coat of cement primer, putty and finished with 2 coats of acrylic emulsion paint of approved make complete all as per the drawings / fabrication drawings as per manufacturer's specification and as directed at site by the Engineer-in-charge. Tentative/Suggested make/model of calcium silicate board for the guidance of bidders: 'HILUX' calcium silicate board. Tentative/Suggested make/model of jointing compound for the guidance of bidders: 'HILUX' jointing compound

Carrying out Data Entry operations and assisting departmental Officer / Engineers, preparation of monthly and quarterly statements, dispatching and delivering documents/file movement and maintaining registers and documents, checking/preparation of agreements etc. as instructed by Engineer-In-charge. Notes: (1) Qualification: Each job shall be carried out by one data entry operator having minimum HSC pass (12th Standard) with complete knowedge of computer (like MS office, etc.) and should also be well conversant in English and Hindi language. (2) Deployment : The contractor shall deploy one Data entry operator for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in -Charge. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Data entry operator exclusively for the particular job. (5) The Data entry operator should be engaged after scrutiny by EIC of CED, BARC and approved by Competent authority and the deployed Data entry operator will report to BARC Engineer/ EIC. (6) The minimum notice period before change of Data entry operator is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1,143/- per day of shortfall in notice period will be levied on the contractor.

Checking of inlet/outlet pipelines and removing the chokes from W/C, washbasin, Traps, bends, eyewash/emergency showers/ss sink laboratory/plant/Toilet area etc. Notes : 1) Plumber/labour should carry necessary plumbing tools like Die-set, pipe-vice, hacksaw, chiesels, cutter machine, grinding machine, drilling machine, punch, callipers, pipe wrench, spanners, screw driver set, hammers, ladder, choke remover pump, rods etc. and all consumables like screws, nails, rawl plugs, holdtite, teflon tape, white cement, Mseal, couplings, unions, etc., complete which are required for various plumbing works and cost of which is deemed to be included in the quoted rate. 2) Payment shall be made as per the log book duly approved by EIC. 3) contractor shall arrange necessary PVC for this work.

Skilled Plumber with valid pvc

Carrying out manual miscellaneous carpentry work like minor repairs, fixing departmental fitting & fixures etc. as and when required and as directed by EIC. Notes : 1) Carpenter/labour should carry necessary carpentry tools like handsaw, hacksaw, chisels, cutter machine, grinding machine, glass cutters, drilling machine, punch, callipers, mallets, hammers, ladder, screw driver set, Ln /Alen Key set etc. and consumables like screws, nails, rawl plugs, adhesives etc., complete required for various carpentry works and cost of which is deemed to be included in the quoted rate. 2) Payment shall be made as per the log book duly approved by EIC. 3) contractor shall arrange necessary PVC for this work.

Carpenter with valid pvc for entire contract period

Helper with valid pvc

Supplying man power along with necessary spades, shovels, punjas, ropes, small special spades, rain coats, broom, mop etc, minimum two labours per day and maximum any number of labour as and when decided by Engineer Incharge to work for eight hours per day to carry out the cleaning work, loading work etc as directed by Engineer Incharge.

Providing and Fixing ANCHOR BOLT including drilling in concrete as per requirement for fixing E.P.s or other structures all as specified by the manufacturer complete all as per specifications and drawings and as directed by Engineer-in-charge. Note: Tentative / suggested model & make of ANCHOR BOLT for guidance of bidder(s) - HSL BOLT Type of M/s HILTI

M-10 X 130 mm Long

M-12 X 131 mm Long

Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge.

Providing, applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade without cement primer.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing and fixing mortice latch and lock of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.

Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge. Tentative/ Suggested make/model for the china flat back half stall urinal: Aquaseal model of M/s Parryware.

Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge

E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm

Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge

Providing and fixing decorative high pressure 1.5 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed by the EIC.

Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge.

Second class teak wood

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing Glazed VITRIFIED floor tiles of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge

Using Tiles of size 600 X 600 mm

Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead

Providing and fixing Minimum 15 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications.

Using materials of approved manufacturers. All test reports to be provided along with the supply of the materials

Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and quartz sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and quartz sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used)

Providing and fixing mirror of superior glass of approved quality and of required shape and size with 6mm thick Plain A.C sheet backing fixed to walls with consealed Brass C.P Mirror screws and consealed washers etc.complete all as per specifications and as directed by Enginner-in-Charge

Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks in substructure with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement

Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking outjoints, curing, cleaning complete all as per specifications and drawings.

Core cutting in RCC beyond 100 mm up to and including 150 mm Dia