Bhabha Atomic Research Centre Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Bhabha Atomic Research Centre - BARC Tender
Civil And Construction
Building Construction
Electrical and Electronics
Electrical Works
Eprocure
Opening Date19 Dec 2024
Closing Soon4 Feb 2025
Tender Amount₹ 3,39,71,000
Costs
EMD
₹ 8,01,716Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BARC_840327_1Tender No
BARC/CED/ET/43/2024-2025 Dated 17/12/2024Tender Authority
Bhabha Atomic Research Centre ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Beyond 3.00m upto 4.50m depth below Average Ground Level
80
-
-
... More
Earth work excavation by mechanical means (Hydraulic excavator) / manual means in foundation, in Soft Rock including shoring, dewatering if necessary, dressing the sides, ramming the bottom, refilling the sides etc. with available selected excavated earth in layers of not exceeding 500 mm in depth, each layer well rammed and consolidated disposal of surplus excavated material within a lead of 200 m complete as per specifications and as directed by the Engineer-in-charge.
-
-
-
... More
From 0.00 upto 1.50 m depth below Average Ground Level
50
-
-
... More
Beyond 1.50 m and upto 3.00 m depth below Average Ground Level
75
-
-
... More
Beyond 3.00m upto 4.50m depth below Average Ground Level
75
-
-
... More
Earth work excavation in foundation in Hard Rock by Chiselling and /or by mechanical means (Hydraulic excavator) / Manual means including dewatering if necessary, dressing the sides, ramming the bottom, and stacking and / or disposing within a distance of 200 m and filling the sides of foundation with available selected excavated earth in layers not exceeding 500 mm in depth, each layer well rammed and consolidated etc.complete all as per specifications and as directed by the Engineer-in-Charge.
-
-
-
... More
From 0.00 upto 1.50 m depth below Average Ground Level
25
-
-
... More
Beyond 1.50 m and upto 3.00 m depth below Average Ground Level
25
-
-
... More
Beyond 3.00m upto 4.50m depth below Average Ground Level
25
-
-
... More
Lead charges for lead exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc.
Note: The rates is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil and @ 50% in respect of Rock from corresponding STACK / TRUCK Measurement.
-
-
-
... More
For Soil
800
-
-
... More
For Rock
300
-
-
... More
Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for preconstructional antitermite treatment and creating a chemical barrier under and alround the masonry pits, masonry foundations, wall trenches, plinth filling, junctions of wall and floor, expansion joints, surfaces of RCC works for a depth of min. 500 mm from the finished ground level, surrounding of pipes, conduits etc., walls retaining soil above floor level, apron and drain along the perimeter of the building including all byeworks complete as per specification / IS 6313:2001 or latest revision and direction of Engineer Incharge (only ground floor plinth area of the building will be measured for the payment in the following three stages. i) 20% after completion of the foundations ii) 50% after completion of the ground floor flooring iii) 30% after completion of all treatment works including ground floor doors & windows. Work to be executed by approved agency and specified guarantee for 10 (ten) years shall be furnished by the contractor.
350
-
-
... More
Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge.
650
-
-
... More
Providing and laying in position cement concrete of 1:3:6/ M-10 with minimum cement content 220 Kg/Cum (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels
50
-
-
... More
Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications.
-
-
-
... More
in substructure (up to Plinth Level)
150
-
-
... More
in superstructure (above plinth level)
200
-
-
... More
Providing and laying in position Reinforced Cement Concrete (RCC) of Grade M-25 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level
50
-
-
... More
Providing and fixing at all levels precast members using cement concrete of Grade M-30 in copings and / or bed blocks, plain window sills, shelves, louvers, steps, staircases, trench covers, drain covers etc. including hoisting and setting in position with C.M 1:3 (using crushed sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge
10
-
-
... More
Extra for RCC Using Ready Mix Concrete from outside Project area including transporting and Pumping from approved Batching plants / RMC plants.
460
-
-
... More
Providing and fixing in position 25 mm thick Joint filler board of approved make in expansion joints to the required size and shape, placing and keeping in position complete as per specifications and drawings and as directed by the Engineer in charge.
20
-
-
... More
Providing, centering, shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels.
-
-
-
... More
For Sub Structure
450
-
-
... More
For Super Structure
700
-
-
... More
Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel Supplied by the Contractor.
-
-
-
... More
Using TMT bars of Fe 500 D grade conforming to IS:1786 (Latest edition) for all sizes.
65
-
-
... More
Supplying and providing Structural Steel work at all levels in Rolled Sections angles, channels, beams, MS Plain/ square/ Circular rods, flats, beam in monorails, girders, tubular sections, pipe sections, built-up sections, trusses , ladders, platforms, handrails, sag nods, gratings, plates of built up sections, gates, lifting hooks of pre cast blocks, etc., including supplying, cutting, bending to the required shape & curvature as specified in drawing, fabricating, erecting as required, welding and fixing in position to correct lines and levels using teakwood gutties including , Dye Penetration test ,painting with a primary coat of approved ZINC CHROMATE Primer in approved make & shade for steel surfaces, cost of scaffolding etc. complete as per drawing, specifications and as directed by the Project Engineer.
Note: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same confirming to IS:2062. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. 4) The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers Note: Tentative/Suggested Make of welding electrode for guidance of bidder(s) : M/s. Advani Oerlicon / ESAB India & D& H or approved equivalent make
-
-
-
... More
Up to and including 300 mm Joists, 350 mm channels, and below sections
1
-
-
... More
Above 300 mm Joists, 350 mm channels and below sections
1
-
-
... More
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircases railing including applying a priming coat of zinc chromate steel primer etc. complete as per specifications using M.S. tubes (Circular, square or rectangular) of ISI marked (Medium) of specified diameter and thickness as per drawing, specifications and as directed by the Project Engineer. Note: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same confirming to IS:2062. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. 4) The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers Note: Tentative/Suggested Make of welding electrode for guidance of bidder(s) : M/s. Advani Oerlicon / ESAB India & D& H or approved equivalent make
250
-
-
... More
Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications etc. complete confirming to IS:2062. Note: 1) Structural steel required for the work shall not be supplied by the Department and the contractor has to procure the same. 2) Welding weights, connections, bolts and nuts shall not be measured for payment, but the cost of which shall be deemed to have been included in the rate. 3) All holes will be made by drilling only. Gas cutting of holes will not be permitted. 4) The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers Note: Tentative/Suggested Make of welding electrode for guidance of bidder(s) : M/s. Advani Oerlicon / ESAB India & D& H or approved equivalent make
1.5
-
-
... More
Providing and fixing hand rail using 304 grade Stainless Steel pipes of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge.
2000
-
-
... More
Providing and constructing Half brick masonry using Flyash/ Flyash Lime bricks in substructure with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement. (Reinforcement will be paid under relevant item)
275
-
-
... More
Providing and Laying Solid cement concrete block masonry with M-5 Grade of 190/ 140 mm thick in super structure in cement mortar 1:4 (using crushed sand). The rate shall also include providing and placing in position 2 nos of 8 mm dia bars at every third course of the masonry work
135
-
-
... More
Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications.
25
-
-
... More
Providing and constructing Random Rubble masonry using approved Rubble stone in super structure (above plinth) in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing above ground level / plinth level and up to and including 20 m height including scaffolding, curing etc. complete as per drawings and specifications.
75
-
-
... More
Providing 12 mm thick Internal plastering in cement mortar 1:4 without cement punning (using crushed sand) finished smooth, including sieving of sand to required fineness, preparation of the surface, scaffolding, curing all as per specifications, drawings and as directed at site complete.
850
-
-
... More
Extra for cement punning for all types of mixes complete all as per specifications and as directed
100
-
-
... More
Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge
450
-
-
... More
Granite Work
-
-
-
... More
Providing and fixing Minimum 15-17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels
75
-
-
... More
Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with 15-17 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.
Using approved shades other than black
100
-
-
... More
Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.
50
-
-
... More
Providing and fixing 1st quality antiskid glazed VITRIFIED tiles of size min. minimum 300 - 600 mm long and 300 - 600 mm wide or as specified by E.I.C with water absorption less that 0.08% and conforming to IS:15622, anti-skid property with ramp test grade of R 12 and of approved make in all colours and shades in flooring, skirting, dadoing over a bed of minimum 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointing/ fixing with grey cement slurry @ 3.3 Kg / sq.m including grouting the joints with waterproof, crack-free, stain-free epoxy tile joint filler of matching shade complete as per patterns, drawings and specifications complete.
450
-
-
... More
Providing and fixing 1st quality digital printed & edge rectified ceramic matt finish floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS:15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) and jointing with grey cement slurry including grouting the joints with waterproof, crack-free, stain-free epoxy tile joint filler of matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge
200
-
-
... More
Providing & applying stonecrete plaster with a mix of cement course aggregate fine marble powder, hardner and water on all the external walls all as directed by EIC.
100
-
-
... More
Flame finish granite work
-
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 15-17 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
200
-
-
... More
Providing and fixing strips of 6mm SS 316 inlay in flame finish granite at approximate 900mm centre to centre all as per direction of EIC.
150
-
-
... More
Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
850
-
-
... More
Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge
850
-
-
... More
Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade with primer coat, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.
150
-
-
... More
Providing & applying Synthetic plaster / Textured Coating with finishes of minimum 2 mm thickness based on synthetic fibre & chemicals having acid, alkalies, fire & fungus resistance properties of approved shade &type on plastered surface/ concrete surface at all levels in the same pattern of facia blocks with grooves, bands for different offsets in different colours as per approved sample including required cost of Steel Double scaffolding. The item shall include applying synthetic plaster with one base coat by trowelling followed by 3 coats of finished paint by brush supplied by same manufacturer, providing decorative finish as required including preperation of plastered surface to receive plaster cleaning the surface including cost of scaffolding and cost of all materials, labour etc complete as per manufacturers specifications and as directed by Engineer. Note : Tentative/suggested make of spider fittings for guidance of bidder(s) : M/s Kemtex Chemicals Pvt. Ltd. or M/s Asian Paints or approved equivalent make
-
-
-
... More
On Plain plastered / concrete sufaces
600
-
-
... More
Providing and applying Polyurethane coating for external application in two coats on stone masonry/ brick masonry with polyurethane paint. Polyurethane for external application system consists of 4 part of Polyurethane resin : 1 Part polyurethane Hardener by weight, as per Manufacturer'sspecifications, including preparation of surface by cleaning with water jet, removing loose material, scaffolding, etc. complete as directed by Engineer-In-Charge. Notes : 1) Application of each coating requires gap of 12 hrs. 2) Net area arrived by Length and breadth of RR wall shall be measured for payment. Note : Tentative/suggested make of spider fittings for guidance of bidder(s) : M/s Gamma Coatings Pvt. Ltd. or approved equivalent make
100
-
-
... More
Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment).
Note : Tentative/suggested make of spider fittings for guidance of bidder(s) : M/s Hilux make or approved equivalent
50
-
-
... More
Providing and fixing powder coated metal grid ceiling of aluminium with wooden grain finish, Grid size of about 1200X 600 mm with min. size of 9/16" square tegular exposed 'T' with main & cross 'T' suspended from ceiling with 12 gauge hanger wire and wire splice for adjustment for height. Fleece backed perforated tile with 12% open area to be provided. 150mm wide grid as per specification to be provided for technical zone panels, straight axiom to be provided at the perimeter. Insulation with 25mm fibre glass in polybag to be provided, etc. complete all as per direction of EIC.
200
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces, chajjas etc. consisting of flowing operations :
(i) Injecting the top slab as required with cement and approved water proof compound solution to fill up all inherent holes, voids honey combs etc.in the concrete slab, setting "autoclaved aerated light weight block bats" coba in waterproof mortar with necessary gradient for easy flow of water & continue the treatment along the inner faces of parapet or other adjoining wall upto a height of 300 mm in the shape of vatas, finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using river / crushed sand) admixed with proprietary water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including mixing 'polyster fibre of approved make' at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 X 300 mm square, 3 mm deep (v) The whole terrace so finished shall be flooded with water for a minimum period of 2 weeks for curing and for final test. All above operations to be done in order and as directed and as specified by the Engineer-in-charge.
-
-
-
... More
120 mm Average thickness for terraces using river sand / crushed sand
200
-
-
... More
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
-
-
-
... More
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
1000
-
-
... More
Extra for colour anodizing
1000
-
-
... More
Providing and fixing powder coating aluminium (Minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z Sections and other sections of approved make confirming to IS:733 and IS: 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per architectural drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required (fittings, Glazing and panelling shall be paid for separately)
'NOTE : 1) The rates for aluminium is inclusive of all fasteners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints. 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
1500
-
-
... More
Providing and fixing approved quality and shape sliding shutter locks cum handle of approved make
10
-
-
... More
Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters
10
-
-
... More
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket or any other suitable fixtures as instruced by E-I-C. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
-
-
-
... More
With clear float glass panes of 5.0 mm thickness
65
-
-
... More
With toughened glass panes of 8.0 mm thickness
20
-
-
... More
With toughened laminated glass of 8mm with PVB (Poly Vinyl Butyral) interlayer
100
-
-
... More
Providing and fixing aluminium Aldrops of size 250 X 16 mm ISI marked ( IS:2681) anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to requried colour or shade with necessary screws, Bolting from rear side complete as per specifications complete.
5
-
-
... More
Providing and fixing anodized aluminium tower bolts of size 200 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.
5
-
-
... More
Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding .
200
-
-
... More
Providing and fixing 40 / 42 mm thick Aluminium Flush Door Shutter consisting of 2 mm thick colour anodized Aluminium Sheets (15 micron), 37 mm wide Aluminium frame work inside filled with glass wool 50 mm thick compressed to 37 mm including all furniture fittings, 4 Nos SS Heavy duty hinges of size 125 mm with SS Screws, 6 lever mortise lock with handles, 1 No 250 X 12 mm long Aluminium tower bolt including vision panel with glass as per drawings complete manufactured by approved manufacturer complete as per approved fabrication drawings as directed by the Engineer-in-charge.
20
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door frames comprising of virgin PVC polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, minimum screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, minimum modulus of elasticity 900 N/mm2 and resistance to spread of flame of minimum Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with SS dash fasteners of required diameter and length complete as per direction of Engineer-In-Charge. Note : 1. The quoted rate shall include the cost of PVC solvent cement, SS dash fasteners and necessary SS screws and no extra payment on this account shall be made. 2. The door frame sample shall be submitted for the approval of Project Engineer before procurement. 3. For WPC solid door frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
... More
Frame size 50 x 100 mm
15
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and minimum screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, minimum modulus of elasticity 850 N/mm2 and resistance to spread of flame of minimum Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: 1. The door shutter sample shall be submitted for the approval of Project Engineer before procurement. 2. Stainless steel butt hinges shall be paid separately.
-
-
-
... More
25 mm thick
10
-
-
... More
Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge
6
-
-
... More
Providing and fixing pair of stainless steel "C" type door handles 10 mm dia, 250 mm long SS 304 grade solid rod of specified size in steel doors/ wooden doors including screws / bolts etc. all as per drawings and specifications complete.
15
-
-
... More
Providing and fixing brass mortise latch and lock of approved make with 6 levers and a pair of lever Brass handles with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.
20
-
-
... More
Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete.
-
-
-
... More
250 mm Dia RCC Hume pipe class Np2
20
-
-
... More
300 mm Dia RCC Hume pipe class Np2
30
-
-
... More
450 mm Dia RCC Hume pipe class Np2
40
-
-
... More
Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specials conforming to relevant IS including jointing with seal ring / With PVC solvent adhesive including fixing in walls using clamps etc complete all as per drawings, specifications and as directed by the Engineer-in-charge
-
-
-
... More
SWR PIPE 160 mm O/D
30
-
-
... More
SWR PIPE 90 mm O/D
15
-
-
... More
Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-35 grade made by block making machines with strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 150 mm thick compacted bed of stone dust / Murrum, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge
200
-
-
... More
Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge
20
-
-
... More
Providing and fixing dry stone pitching 22.5 cm thick laid in required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete as directed by the Engineer-in-charge
150
-
-
... More
Providing and grouting the joints of rubble stone pitching with cement mortar 1:3 and pointing the surfaces as directed complete as directed by the Engineer-in-charge
100
-
-
... More
Providing and fixing invisible grill for monkey menace, with approved aluminium section of min. 2mm fixed with stainless steel 304 bolts with nylon washer @ 75mm spacing. Wire Rope of 316L Marine grade SS of 3mm dia coated with Copolymer nylon/ teflon will be placed at 75mm spacing etc. complete all as per direction of EIC.
Note: Aluminium section used will be paid separately underrelevant item.
50
-
-
... More
Applying stamping finish to the top surface of freshly laid plain/reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per the direction of Engineer-in-Charge. The process shall include the following: a) The concrete shall be placed and screeded to the finish grade and floated to a uniform surface by using standard finishing techniques. b)The non-metallic hardner in approved colour @2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by dry shake method by sprinkling in two or more shakes, floated after each shake and trowlled only after the final floating. c) The approved release agent @ 0.113kg/sqm shall be applied evenly to the trowlled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required size to achieve final stamped pattern. d) These stamping shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size and weight to leave proper stamps and the process repeated for the remaining concrete surfaces till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting. e) After stamping, the curing shall be done as per manufacture's specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with matching colour hardner as per the instruction of EIC. f)The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/ sqm on the finished surface. g) The construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3m or lesser as per the site conditions and filling the same with 10mm baker rod and providing and laying Polyurethane (PU) based joint sealer of approved make as per manufacturer's specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron thickness, applied by rollers on properly cured and dry clean surface. Note: Cost of concrete for above flooring is not included in this item and it shall be paid separately under relevant item of concrete.
150
-
-
... More
Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge. E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.
1
-
-
... More
Providing and fixing viterious China wash basin of approved make and colour with C.I. brackets, 15 m C.P. brass pillar tap of approved make,15 mm x 600mm long PVC Inlet connection, 32 mm heavy quality C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge
-
-
-
... More
White vitreous China wash basin size 630 x4 450 mm and equivalent sizes with single 15 mm C.P. brass pillar tap
7
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal size 580x380x350 mm / 610 mm of approved make with Push cock of approved make,with CP brass flush pipe unions, heavy quality C.P. brass spreaders, C.P waste coupling with dome grating, clamps complete all as per specifications drawings and as directed by the Engineer-in-charge.
4
-
-
... More
Providing and fixing stainless steel AISI 304 (18/8) satin finish kitchen sink with drain board with over all size of 1145 x 510 mm and bowl size of 560 x 410 mm and 241 mm depth of approved make and model with C.I. brackets and stainless steel waste coupling, fittings, including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried.complete as per specifications and as directed by the Engineer-in-charge
4
-
-
... More
Providing and fixing 15 mm n.b C.P Brass Angle cock of approved make and type, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Project Engineer. (Samples to be got approved by the Project Engineer)
10
-
-
... More
Providing and fixing C.P brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge
-
-
-
... More
15 mm n.b CP brass concealed stop cock of approved make
15
-
-
... More
Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge
-
-
-
... More
15 mm n.b CP Brass open stop cock of approved make and type
15
-
-
... More
Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge
15
-
-
... More
Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge
1
-
-
... More
Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete.
1
-
-
... More
Providing and fixing C.P Brass towel rail 600 mm long of approved make complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the project engineer.
10
-
-
... More
Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .
1
-
-
... More
Providing, laying, jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples, reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting, threading, jointing with hemp yarn, white lead, jointing Teflon tape, Chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of Anti corrosive bitumastic paint, all as directed at site. Pipes with exclusive use of approved make C-Class pipes. Note : Tentative/suggested Make for the guidance of bidder (s) : M/s. Tata or approved equivalent make.
-
-
-
... More
20 mm dia G.I pipes Concealed work with C-Class
75
-
-
... More
25 mm dia G.I pipes Concealed work with C-Class
25
-
-
... More
32 mm dia G.I pipes Concealed work with C-Class
20
-
-
... More
40 mm dia G.I pipes Concealed work with C-Class
10
-
-
... More
Providing and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps including chasing the walls, concealing the pipes and making good the same etc. This includeds jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer
-
-
-
... More
15 mm outer dia CPVC pipe (Concealed)
20
-
-
... More
20 mm outer dia CPVC pipe (Concealed)
10
-
-
... More
25 mm outer dia CPVC pipe (Concealed)
10
-
-
... More
Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge
-
-
-
... More
20 mm n.b
5
-
-
... More
25 mm n.b
5
-
-
... More
32 mm n.b
2
-
-
... More
40 mm n.b
2
-
-
... More
Providing and fixing G.M / brass ferrule in existing water main lines of specified dia and making connections including drilling / boring complete all as directed by the Engineer-in-charge
-
-
-
... More
20 mm Ferrule
2
-
-
... More
25 mm Ferrule
2
-
-
... More
Providing and fixing stainless steel toilet paper holder recessed type of approved make and type with S.S screws as directed by the Engineer-in-charge complete.
2
-
-
... More
Providing and fixing 150 X150 mm soap dish of white viterious Chinaware, of approved make including chasing walls making good the same after fixing the China Soap dish etc. complete all as per specifications and as directed by the Engineer-in-charge
5
-
-
... More
Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge
5
-
-
... More
Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.
-
-
-
... More
75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or CI hubless pipe as per IS 15905 with SS 304 copuling & EPDM rubber gasket
10
-
-
... More
100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint or CI hubless pipe as per IS 15905 with SS 304 copuling & EPDM rubber gasket
30
-
-
... More
150 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.20 kg lead / joint or CI hubless pipe as per IS 15905 with SS 304 copuling & EPDM rubber gasket
75
-
-
... More
Providing and fixing square mouth S.W. gully trap complete with CI grating of approved make brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design
-
-
-
... More
150 x 100 mm size gully trap "P" type
5
-
-
... More
Providing and constructioning Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item)
2
-
-
... More
Extra depth over initial depth of 900 mm for chambers of 900 x 600 mm internal size.including fixing cast iron steps (C.I steps shall be paid under relevant item)
1
-
-
... More
Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of approved make of the following capacities with suitable S. M. C cover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I Nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge
-
-
-
... More
3000 lit capacity HDPE CYLINDRICAL vertical storage water tank
1
-
-
... More
Making holes in RCC structures using core cutter of required size mentioned below including cutting of Reinforcement if necessary and rate quoted shall include labour and disposing of materials away upto a lead of 200m, along with finishing the concrete etc. complete as directed by Engineer-in-charge.
-
-
-
... More
Core cutting in RCC up to and including 50 mm Dia
5
-
-
... More
Core cutting in RCC beyond 50 mm up to and including 100 mm Dia
5
-
-
... More
Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge
40
-
-
... More
Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
30
-
-
... More
Dismantling of RCC works including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
30
-
-
... More
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead
20
-
-
... More
Demolishing dry stone pitching in floors, drains etc. including stacking serviceable materials and disposal of unserviceable materials within 200 m lead
45
-
-
... More
Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
10
-
-
... More
Carrying out Civil Engineering works like surveying & leveling, checking of form work fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Notes :
(1) Each Job shall be carried out by one qualified Technician having minimum SSC with Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of not less than one year duration from ITI/Government Recognised Vocational Training Institute or experienced Technician retired from Government service. (2) Deployment: The contractor shall deploy one Technician for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in -Charge. (4) Mode of measurement : Measurement will be per job basis per day. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Technician will report to BARC Engineer/ EIC. (6) The minimum notice period before change of technician is 1 (One) month; failing which a compensation, for not providing technical support, of Rs. 1,206/- per day of shortfall in notice period will be levied on the contractor.
450
-
-
... More
Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1) Each Job shall be carried out by one qualified Degree holder Civil Engineer with 2 (Two) years experience or Diploma holder with 5 (Five) years experience (Licentiate in Civil/Construction Engineering / Technology) conducted by Board of Technical Examinations / University / Autonomous Govt. / Govt. recognized recognized Polytechnic/ Institute.
(2) Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Engineer will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account.
(3) Period of work: The contractor shall carry out number of Jobs per month as per requirement at site for the period mentioned in NIT.
(4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Engineer exclusively for the particular job.
(5) Engineer should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Engineer will report to BARC Engineer/ EIC.
(6) The minimum notice period before change of engineer is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1,579/- per day of shortfall in notice period will be levied on the contractor.
18
-
-
... More
Supplying man power along with necessary pans, spades, shovels pickaxe, punjas, ropes, small special spade, raincoats, safety shoes, etc. minimum two number of labour per day upto maximum any number of labour as and when decided by Project Engineer to work for eight hours per day or monsoon period to carry out the cleaning of choked drains grating grills/hume pipes /footpath by removing the dry leaves, silt etc. and also carry out seasonable departmental work allotted by Project Engineer from time to time.
50
-
-
... More
Indoor Lighting Fixtures - Supply, installation, testing and commissioning of following LED lighting fixture as per tender specification.
-
-
-
... More
Recess LED lighting fixture as per TSS 01
12
-
-
... More
Recess 150 mm width LED lighting fixture for techzone ceiling as per TSS 02
18
-
-
... More
Rail type LED lighting fixture as per TSS 03
25
-
-
... More
Surface LED lighting fixture as per TSS 04
22
-
-
... More
Outdoor Lighting Fixtures - Supply, installation, testing and commissioning of following outdoor LED lighting fixture as per tender specification.
-
-
-
... More
Bollard lighting fixture as per TSS 05
15
-
-
... More
Foot lighting fixture as per TSS 06
40
-
-
... More
Spike lighting fixture as per TSS 07
10
-
-
... More
Outdoor Spot lighting fixture as per TSS 08
8
-
-
... More
Lamp post lighting fixture as per TSS 09
15
-
-
... More
Distribution Boards - Supply, installation, testing and commissioning of following distribution boards as per tender specification.
-
-
-
... More
8 way VTPN DB as per TSS 10
1
-
-
... More
12 way PPI TPN DB as per TSS 11
1
-
-
... More
8 way PPI TPN DB with timer as per TSS 11A
1
-
-
... More
LT power cable - Supply, installation, testing and commissioning of following 1.1 kV, copper/Al conductor, XLPE insulated, PVC sheathed FRLS cables as per tender specifications.
-
-
-
... More
Surface laying of 3.5C x 70 sq. mm Al conductor cable as per TSS 12
30
-
-
... More
Under ground laying of 3.5C x 70 sq. mm Al conductor cable as per TSS 12
90
-
-
... More
Surface laying of 4C x 10 sq. mm copper conductor cable as per TSS 12
100
-
-
... More
Surface laying of 4C x 25 sq. mm Al conductor cable as per TSS 12
50
-
-
... More
End termination of power cables - End termination of following copper/Al conductor, XLPE insulated, PVC sheathed cables with copper lugs, single compression type brass glands, earthing etc as per tender specifications.
-
-
-
... More
3.5C x 70 sq. mm Al conductor cable as per TSS 13
2
-
-
... More
4C x 10 sq. mm copper conductor cable as per TSS 13
10
-
-
... More
4C x 25 sq. mm Al conductor cable as per TSS 13
6
-
-
... More
1 pair 1.5 sq.mm copper cable as per TSS 13
70
-
-
... More
Point wiring - Supply, installation, testing and commissioning of point wiring as per TSS 14 of tender specification.
-
-
-
... More
Wiring with 2.5 sq.mm copper wire (Primary switch box point for light/ fan)
12
-
-
... More
Wiring with 2.5 sq.mm copper wire (Primary power point)
22
-
-
... More
Wiring with 2.5 sq.mm copper wire (Secondary power point)
22
-
-
... More
Wiring with 1.5 sq.mm copper wire (Primary light/fan point)
24
-
-
... More
Wiring with 1.5 sq.mm copper wire (Secondary light/fan point)
64
-
-
... More
Wiring with 4 sq.mm copper wire (AC/Geyser point/Display point)
11
-
-
... More
Modular box - Supply and installation of following modular boxes as per TSS 15 of tender specification
-
-
-
... More
8 module box
44
-
-
... More
4 module box
20
-
-
... More
2 module box
22
-
-
... More
Switches - Supply, installation, testing and commissioning of following modular switches as per TSS 16 of tender specification
-
-
-
... More
16 A SP switch
44
-
-
... More
6A SP switch
78
-
-
... More
20 A DP MCB in box
11
-
-
... More
Sockets - Supply, installation, testing and commissioning of following sockets as per TSS 17 of tender specification
-
-
-
... More
6/16A sockets
42
-
-
... More
6A sockets
46
-
-
... More
20 A metal clad socket in box
11
-
-
... More
Blanking Plates - Supply and installation of Blanking Plates as per TSS 18 of tender specification
75
-
-
... More
Trunking - Supply and installation of Trunking with cover of 80 mm x 50 mm size along with accessories as per TSS 19 of tender specification
50
-
-
... More
Casing capping - Supply & installation of 25x12 mm size casing capping as per TSS 20 of tender specification
100
-
-
... More
Three phase out-let - Supply, installation, testing and commissioning of 32 A three phase socket, three phase switch (MCB) and three phase plug -top as per TSS 21 of tender specification
2
-
-
... More
Data Points - Supply, installation, testing & comissioning of data points as per TSS 22 of tender specification
7
-
-
... More
Cat6 UTP Cable - Supply, installation, testing and termination of cat6 cable as per TSS 23 of tender specification
900
-
-
... More
Cat6 cable End termination - End termination of Cat6 UTP Cable as per TSS 24 of tender specification
18
-
-
... More
Telephone Points - Supply, installation, testing & comissioning of telephone points as per TSS 25 of tender specification
5
-
-
... More
GI Flexible pipe - Supply and installation of GI Flexible pipe as per TSS 26 of tender specification
200
-
-
... More
Excavation - Excavation as per TSS 27 of tender specification
25
-
-
... More
Plain cement concrete (PCC) - Casting of plain cement concrete (PCC 1:2:4) with supply of cement, metal, sand etc as reqd at site and as directed by EIC as per attached technical specifications.Necessary frame and shuttering required is to be arranged by the contractor as per TSS 28 of tender specification.
2
-
-
... More
Fan - Supply, installation, testing and commissioning of following Fans as per TSS 29 of tender specification
-
-
-
... More
300 mm exhaust fans
2
-
-
... More
450 mm exhaust fans
3
-
-
... More
BLDC Ceiling Fan
6
-
-
... More
400mm BLDC wall mounting Fan
6
-
-
... More
PVC Conduit - Supply and installation of PVC Conduit surface/concealed as per TSS 30 of tender specification
1000
-
-
... More
PLB HDPE Pipe- Supply and installation of following size PLB HDPE pipe to be laid in ground as per TSS 31 of tender specifications.
-
-
-
... More
50 mm dia PLB HDPE Pipes
600
-
-
... More
25 mm dia PLB HDPE Pipes
200
-
-
... More
3 Core Cable - Supply, installation, testing and commissioning of 3 Core x 2.5 Sq.mm, copper conductor, PVC insulated, PVC sheathed cable as per TSS 32 of tender specifications.
1000
-
-
... More
End termination of 3 Core x 2.5 Sq.mm, copper conductor, PVC insulated cable as per TSS 33 of tender specifications.
200
-
-
... More
Supply and installation of Straight IP68 connector with box suitable for 3 Core x 2.5 Sq.mm, copper conductor, PVC insulated cable as per TSS 34 of tender specifications.
10
-
-
... More
Supply and installation of Metal Glands suitable for 3 Core x 2.5 Sq.mm, copper conductor, PVC insulated cable as per TSS 35 of tender specifications.
10
-
-
... More
M S Box - Supply & installation of MS boxes fabricated out of MS sheets as per TSS 36 of tender specification.
100
-
-
... More
M S item - Supply & installation of MS items fabricated out of MS angles/channels as per TSS 37 of tender specification.
200
-
-
... More
Earthing stations - Supply, installation, testing and commissioning of earthing station consisting of 600 x 600 x 3.15 mm thick tinned copper earth plate, GI pipe, funnel, masonary chamber etc as per tender TSS 38 ofspecifications.
2
-
-
... More
Earthing Conductor - Supply and installation of tinned copper earth strip/wire of following sizes to be installed in trenches, under ground, wall, RCC, slab, above false ceiling, trenches etc. as per tender specifications.
-
-
-
... More
25x3 mm copper strip as per TSS 39
50
-
-
... More
8 SWG copper wire as per TSS 40
100
-
-
... More
MCB in a box - Supply, installation, testing and commissioning of following rating Three phase 4 P MCB with box as per TSS 41 of tender specifications.
-
-
-
... More
4P 25 A MCB
2
-
-
... More
4P 32 A MCB
2
-
-
... More
Fire alarm system - only installation of following fire alarm system equipments as per TSS 42 of tender specifications.
-
-
-
... More
Surface laying of 1 pair 1.5 sq.mm copper cable
300
-
-
... More
Underground laying of 1 pair 1.5 sq.mm copper cable
200
-
-
... More
Addressable Smoke/heat detectors
25
-
-
... More
Manual call point
2
-
-
... More
Hooter cum flasher
2
-
-
... More
Response indicator
10
-
-
... More
Providing and installing of dining table of size 1200mm x 750mm x 750 mm as per technical specification no. 1 for furniture, fixture & canteen equipment.
6
-
-
... More
Providing and installing of dining table of size 1800mm x 750mm x 750 mm as per technical specification no. 2 for furniture, fixture & canteen equipment.
3
-
-
... More
Providing and installing of dining chairs made with SS frame with plastic seat and back as per technical specification no. 3 for furniture, fixture & canteen equipment.
60
-
-
... More
Providing and installing of SS table with trays for water tumblers of size 1000mm x 550mm x 800mm +100 splash back as per technical specification no. 4 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of SS pantry work table with shelf of size 1000mm x 500mm x 800mm as per technical specification no. 5 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of SS counter work table of size 1200mm x 550mm x 800mm + 100 splash back as per technical specification no. 6 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of SS adjoning table of size 800mm x 550mm x 800mm as per technical specification no. 7 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of SS storage racks of size 1000mm x 550mm x 1600mm as per technical specification no. 8 for furniture, fixture & canteen equipment.
3
-
-
... More
Providing and installing of SS stores cabinet of size 1200mm x 550mm x 1200mm as per technical specification no. 9 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of water cooler of 40Ltr. Cooling capacity per hour with 80 Ltr. storage capacity as per technical specification no. 10 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of double electric heater with two heaters of capacity 2KW as per technical specification no.11 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of SS table top hot food cabinet of size 600m x 450mm x 550mmas per technical specification no.12 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of sandwich griller with capacity/rating 4KW single phase as per technical specification no.13 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of industrial juicer with motor 1HP, single phase, 1440rpm cast iron body as per technical specification no.14 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of table top oil fryer with oil holding capacity 2-2.5 liters per chamber as per technical specification no. 15 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of table top SS spoon sterilizer with SS under table with rating 2KW, single phaseas per technical specification no. 16 for furniture, fixture & canteen equipment.
3
-
-
... More
Providing and installing of commercial type induction cook top with rating 3.5KW, single phase, 230volt as per technical specification no. 17 for furniture, fixture & canteen equipment.
3
-
-
... More
Providing and installing of microwave oven with utensils with capacity of 23 lit capacity, convection type as per technical specification no. 18 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of fly kill lite unit with rating of 60/40 watts, single phase as per technical specification no. 19 for furniture, fixture & canteen equipment.
8
-
-
... More
Providing and installing of electrical table top dosa plate of size 700mm x 450mm x 250mm as per technical specification no. 20 for furniture, fixture & canteen equipment.
2
-
-
... More
Providing and installing of vertical vise cooler with capacity of 500 liter storage capacity as per technical specification no. 21 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of deep freezer with capacity of 300 liter storage and working temperature up to -20oC as per technical specification no. 22 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of SS tea urn with capacity of 50 cups as per technical specification no. 23 for furniture, fixture & canteen equipment.
6
-
-
... More
Providing and installing of SS two sink unit with heater as per technical specification no. 24 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of SS table with middle sink as per technical specification no. 25 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of SS clean dish rack as per technical specification no. 26 for furniture, fixture & canteen equipment.
1
-
-
... More
Providing and installing of SS wash area square table as per technical specification no. 27 for furniture, fixture & canteen equipment.
1
-
-
... More
Ductable Air Conditioner: Supply, installation, testing and commissioning of ceiling suspended ducable Air Condiioning system of 5.5TR nominal cooling capacity each having microprocessor based controller along with outdoor units as per clause no.1 of tender technical specification for HVAC works.
2
-
-
... More
Ducting work: Fabrication, supply, installation, testing, air balancing and commissioning of air ducting in rectangular cross section, fabricated out of Gavanised Steel sheets of thickness 0.8 mm.The ducting work shall be carried out as per clause no.2 of tender technical specification for HVAC works.
32
-
-
... More
Four way supply air diffuser alongwith dampers: Supply, installation, testing and commissioning of 4-way supply air diffuser in Aluminium construction alongwith dampers finished with suitable RAL colour. The diffuser work shall be carried out as per clause no.3 of tender technical specification for HVAC works.
1.5
-
-
... More
Thermal Insulation: Supply and installation of class 0 thermal insulation sheet of 25mm thickness in closed cell structure (Nitrile butadine rubber) with reinforced glass cloth covering as per clause no.4 of tender technical specification for HVAC works.
40
-
-
... More
Acoustic insulation of duct: Supply & installation of hydrophobic, open-cell elastomeric foam based rubber acoustic insulation of 25mm thickness as per clause no.5 of tender technical specification for HVAC works.
10
-
-
... More
Fire retardant flexible connection: Fabrication, supply and installation of fire retardant flexible connection as per clause no.6 of tender technical specification for HVAC works.
4
-
-
... More
Copper Piping: Supply and installation of refrigeration quality copper piping/tubing along with sleeve type insulation as per clause no. 7 of tender technical specification for HVAC works. NB: Each running meter of copper tubes will consists of one meter each of suction and discharge line together along with insulation.
50
-
-
... More
Electrical Cabling: Supply, laying and termination of following size electrical cables as per clause no.8 of tender technical specificaion for HVAC works.
-
-
-
... More
Four core 4 sq.mm
50
-
-
... More
Three core 2.5 sq.mm
10
-
-
... More
Drain Piping: Supply and laying of condensate drain pipes of 25mm dia NB rigid PVC pipe as per clause no.9 of tender technical specification for HVAC works.
15
-
-
... More
Caping-casing: Supply and installation of PVC casing - capping of 100 x 50 mm size for enclosing refrigerant tubing, condensate drain piping and electrical cable as per clause no.10 of tender technical specification for HVAC works.
25
-
-
... More
MS Structural work: Supply, fabrication & fixing of stands and structures (size depending as per site condition) made out of mild steel of appropriate grade completely painted with black color as per clause no. 11 of tender technical specification for HVAC works.
60
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%