Bhabha Atomic Research Centre Tender

DISMANTLING BRICK WORK in cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100m lead as per direction of Engineer-in-charge.

DISMANTLING OF RCC WORKS carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200m lead as per direction of Engineer-in-charge.

DISMANTLING OLD PLASTER OR SKIRTING carefully, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100m lead.

DISMANTLING DOORS, WINDOWS AND CLEAR STOREY OPENINGS (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100m lead (full windows) of area 3.00 Sq.M and below.

DISMANTLING ALUMINIUM / GYPSUM PARTITIONS, DOORS, WINDOWS, FIXED GLAZING AND FALSE CEILING including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge.

REMOVING FLAT BACK URINALS / EWC / OWC / AIWC carefully along with the cast iron / ceramic / plastic flushing cistern including all its accesseries, items including removing bracket screws & existing C.P. fittings & stacking the same as directed by Engineer-in-charge.

REMOVING HAND WASH BASIN carefully alongwith bottle trap, stop cock, pillar tap, brackets & PVC connections carefully & stacking the the same as directed in Civil Maintenance Stores at BARC Hospital as directed by Engineer-in-charge.

Dismantling the following dia of C.I. PIPES including excavation, taking out the pipes manually / by mechanical means, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge

75 mm Dia to 200 mm Dia C.I. Pipe

DISMANTLING G.I. PIPES OF ALL DIAMETER EXTERNAL WORK including excavation and refilling trenches after taking out pipes manually/ by mechanical means including stacking of pipes within 100m lead as per direction of Engineer-in-charge. Note: measurement shall be considered as centre line measurements of pipes of all dia. including fittings & fixtutes & no extra payment shall be made for the attached fittings & fixtures.

LEAD CHARGES FOR LEAD UPTO 30 KM by mechanical transport includinmg loading,unloading, stacking / levelling etc. The rates are applicable for NET Quantities arrived after making deduction for voids @ 30% from corresponding TRUCK Measurement. Note: Finding authorised ground for disposing debries, trasporting of debries at disposal ground, disposing, stacking, leveling & statutery charges if any will be responsibility of the Contractor and no extra charges shall be paid for the same. The debris from identified area shall be cleared every week after accumulation of minimum One Track Load.

Debris Beyond 4 Km but up to and including 30 Km.

Providing and laying in position CEMENT CONCRETE OF 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels.

Providing and FIXING ANCHOR FASTNER of approved make including drilling in concrete as per requirement for fixing EPs or other structures all as specified by the manufacturer complete all as per specifications and drawings or as directed by Engineer-in-charge.

16mm diameter & 200 mm Long

Providing STRUCTURAL STEEL WORK using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge. Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of ISI mark. All test reports to be provided along with the supply of the materials

Making the OPENING IN BRICK MASONRY FOR DOOR / WINDOW / CLEAR STORY OPENING including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/ rubbish to the nearest dumping ground.

Providing and constructing BRICK WORK in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge. Brickwork in super structure with standard bricks in C.M 1:4 using crushed sand.

Providing and constructing HALF BRICK MASONRY using bricks of approved quality / class, make/ brand in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications and as directed by the Engineer-in-charge up to 20 m height.

Providing & Applying CEMENT GROUTING complete as per specifications (i) Clean the surface with clean water & keep wet for some time, (ii)Mix required quantity of GROUT with 11% to 13% water to get desired consistency, (iii)Mix with low speed spiral mixer to get lumps free paste, (iv)Pour the mix continuously with presure jet as directed by Engineer in charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. ACC SURAKSHA GROUT-275 or equivalent make

Providing & applying 2 COATS OF ACRYLIC EMULSION BASED WATERPROOFING CEMENT COAT for Internal/External faces of brickwork / concrete surfaces including river sand spray over the coated surface or preparation of the surface for plastering, curing, finishing etc. complete as per specifications (i) Mixing 1kg above material with 1 kg Cement (1:1) and make a consistent pest/mixture, (ii) Clean the old surface dust free and apply 1st coat, (iii) Wait for 4-6 hrs, (iv) Apply 2nd coat at 90 degree direction of 1st coat etc. Coverage @ 3-3.5SqM/Kg of above material etc. complete as directed by the Engineer-in-charge. Note : 1. Tentative / suggested make for guidance of bidder(s): M/s. ACC LEAKBLOCK CEMENT COAT LB-303 or equivalent make. 2. 5 Years Warranty of the work will be in the form of Tri-Party Agreement to be submitted by the contractor.

Providing & applying 12mm THICK READY MIX INTERNAL WATERPROOF PLASTERING for Internal/External faces of brickwork / concrete surfaces including preparation of the surface, curing, finishing etc. complete as per specifications (i) Clean the loos particle, dust, oil, grease etc. properly from the surcafe, (ii) Mix required quantity of Waterproof Plaster with 2.8 to 3.2 litres of water to get desired consistency, (iii) Mix with low speed spiral mixer to get lumps free paste, (iv) Apply on surface with trowel, Coverage @ 0.92 to 1.10 SqM/20Kg to get even surface etc. complete as directed by the Engineer-in-charge. Note : 1. Tentative / suggested make for guidance of bidder(s): M/s. ACC LEAKBLOCK CEMENT COAT LB-101 or equivalent make. 2. 5 Years Warranty of the work will be in the form of Tri-Party Agreement to be submitted by the contractor.

Providing STRUCTURAL REPAIRS IN OLD DAMAGED CONCRETE STRUCTURES / SURFACES WITH APPROVED POLYMER with following operations:- 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg : silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand : 0.75 Kg silica sand : 200 ml polymer) 1.00 Lit 609.00 671.005) If thickness of repair exceeds 20mm , after every 20mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used) Note: Scaffolding will be paid separately under relevant item.

Providing & applying 2 COATS OF ACRYLIC, CEMENTITIOUS, POLYMER MODIFIED FLEXIBLE EMULSION BASED WATERPROOFING & PROTECTIVE CEMENT COATING having technical properties i.e. Maximum Elongation 50%, Pot life 40minutes, Water Permiability @ 5bar, Adhesive strength 1N/SqMM for Internal faces of brickwork / concrete surfaces including river sand spray over the coated surface or preparation of the surface for plastering, curing, finishing etc. complete as per specifications (i) Mixing 1kg of above material with 1 kg Cement (1:1) and make a consistent pest/mixture, (ii) Clean the old surface dust free and apply 1st coat, (iii) Wait for 6-8 hrs, (iv) Apply 2nd coat at 90 degree direction of 1st coat etc. Coverage @ 1.65 to 1.7 SqM/Kg of above material etc. complete as directed by the Engineer-in-charge. Note : 1. Tentative / suggested make for guidance of bidder(s): M/s. DR FIXIT PIDIFIN-2K or equivalent make. 2. 5 Years Warranty of the work will be in the form of Tri-Party Agreement to be submitted by the contractor.

Providing and fixing DOUBLE TUBULAR SCAFFOLDING SYSTEM using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer-in-charge. Notes: The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding .

Providing and fixing 1st quality CERAMIC GLAZED FLOOR TILES of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing GLAZED VITRIFIED FLOOR TILES in floor and dado of approved make in different sizes conforming to IS 15622 in all colours and shades in Glossy or Matt or satin finish laid over a bed of minimum 20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints with white cement based Tile Grout of approved make and matching shade complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Using Tiles of size 600 X 600 mm

Add Extra for POLYMER MORTAR in place of cement mortar.

Providing and laying FLOORING PLASTER OF PARIS 8mm THICK OVER NEW LAID TILES including spreading polythene paper, curing, levelling,removal and disposal of same before cleaning floor, labour, tools etc. complete and as directed by Engineer in charge.

Providing and fixing 1st quality CERAMIC GLAZED WALL TILES conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

CUDDAPAH STONE SLAB OVER KITCHEN PLATFORM etc. using 25 mm to 30 mm thick machine cut double machine polished slabs in single piece upto a maximum length of 1.80 metres laid over 20 mm thick cement mortar bedding 1:4 finished to proper levels, cured etc. complete.

Providing and fixing Minimum 15 to 17 mm thick gang saw cut mirror polished (Premoulded and Prepolished) machine cut GRANITE OF TELEPHONE BLACK COLOUR FOR KITCHEN PLATFORMS, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Extra for providing EDGE MOULDING TO 15 TO 17mm THICK MARBLE STONE / GRANITE SLAB counters, Vanitis etc. including machine polishing to edge to give high gloss finish etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Granite Work

Providing WOOD WORK IN FRAMES OF DOORS, WINDOWS, CLEAR STORY OPENINGS (Using Second class teak wood only) and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters, making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note: Quoted rate shall hold good for entire wall lining system. Warranty for 5 years of the wood work will be in the form of Tri-Party Agreement submitted by the contractor.

Providing and fixing 35 MM THICK FLUSH DOOR SHUTTERS conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note: Quoted rate shall hold good for entire wall lining system. Warranty for 5 years of the wood work will be in the form of Tri-Party Agreement submitted by the contractor.

Providing and fixing C.P. TEAK WOOD MOULDED BEADING (ARCHITRAVE) of size 50 X 12 mm using 2nd class teak wood to door and window frames with necessary screws and painting with a coat of approved primer etc. complete as directed & approved by Engineer-in-Charge.

Providing LOUVERED OPENING IN DOOR SHUTTERS including making the opening, providing & fixing teak wood louver blades with necessary teak wood frame work & beading & applying one coat of approved wood primer etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing decorative high pressure 1.0MM THICK LAMINATED SHEET of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing MORTICE LATCH AND LOCK of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden / steel / FRP/ doors as per specifications etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note : Tentative / suggested make for guidance of bidder(s): M/s. GODREJ / M/s HETTICH or equivalent make

Providing & Fixing of DOOR CLOSER STD ARM (Capacity 60-⁠80 Kg.) with standard lever arm, necessary screws and fixing etc. complete as per specifications and as directed by the Engineer-in-Charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. DORMA Door closer TS-71 or M/⁠s TECMA Door closer FT-1070 or equivalent make

Providing and fixing ALUMINIUM HANDLES 175mm LONG INNER GRIP 125mm WITH 12mm DIA ROD PLATE TYPE BOW HANDLES ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing ANODISED ALUMINIUM TOWER BOLTS OF SIZE 250 X 12mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing ANODISED ALUMINIUM BABY LATCH of size 75 X 12 mm ISI marked of approved make transparent or dyed to requried colour or shade with necessary screws etc.

Providing and fixing ALUMINIUM HANGING HEAVY QUALITY FLOOR DOOR STOPPER ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing IS:12817 marked STAINLESS STEEL BUTT HINGES OF SIZE 100 x 60 x 2.5mm (heavy weight) of approved make with stainless steel screws etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing IS:12817 marked STAINLESS STEEL BUTT HINGES OF SIZE 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Supplying, providing and fixing STAINLESS STEEL-304 D-HANDLES (MATT FINISH) OF LENGTH - 300mm, DIAMETER-25mm, suitable S.S. fange , S.S. cap and thickness 16 Guage thickness to brick Walls, R.C.C. surface, Wooden doors etc. including drilling, S.S. Screws of 30mm long (6 Nos for each handle), cost of labour, tools, tackles ,wooden gutties, plants, transportaion, scaffolding etc. complete as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing WATER PROOF MARINE PLY the rates are exclusive screws, washers etc complete providing and fixing hard wood leaping around board in walls etc. complete as per specifications and as directed by the Engineer-in-Charge. Note : Tentative/suggested make for the guidance of the bidder (s) : M/s. Kit ply / Anchor ply or equivalent make

By using 8 mm thick water proof marine ply.

Providing and fixing 25 mm thick Colour PVC Integral Foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under: 1. Density : 0.475 to 0.55 g/cc, 2. Hardness (Shore 'D'): min. 55, 3. Water absorption : max. 1 %, 4. Tensile strength : min. 13 MPa, 5. Elongation : min. 15 %, 6. Flextural Strength min. 30 MPa, 7. Compressive Strength at 10% Deformation : min. 3 MPa, 8. Vicat Softening Temperature: more than 75 Deg Celcius 9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)

Supplying & Installing GLAZED OPENABLE top hung doors, windows and ventilator shutters, vision panel unit comprising of 6 mm heat strengthened Silver Blue of approved equivalent shade & colour reflective tinted glass coated on surface # 2 including approved stainless steel stays, 4 point Cremone locking set including providing and fixing 70mm sided triangular sign in 3M film on glass surface #1 etc all complete as per approved shop drawings and specifications. Note: Single glazed openable shutters/doors,windows and ventilators vision panel units shall be measured to the overall dimensions on external face as fixed on site (Actual size).

Manufacture, supply and installation of LOUVERS MADE OF 4MM THICK ALUMINIUM COMPOSITE PANELS of approved make in the external vertical face and flush with the facade system for inlet of fresh air as per the design / details including all necessary aluminium (with minimum 25 micron thick anodisation) frames, sub frames, peripheral flashings to avoid any ingress of water inside the building with stainless steel bird wire mesh on the inside etc. complete as per details in approved shop drawing and specifications.

Supply & installation of HINGEABLE OPEN CELL CEILING FOR TOILET AREA with cell size of 100x100mm made out Aluminium 0.4mm thk. The assembled cell ceiling panels shall be in size of 600x1200 made out of blades in 9mm (W) x 40mm (H). The assembled cell ceiling panels are then clipped into 32x36x32mm carriers in GMS, coated in black enameled finished at 1200mm c.c.. Once the carriers are installed then primary perforated L- angles 30x30x1.2mm made out of GMS are cross connected to the carriers at 1200mm c.c. for lateral bracing. The whole ceiling shall be suspended by M6 threaded rods installed 1200mm c.c. All panel modules must be hingeable through wire clips, Rate to include all kinds of profiles, coves, verticals, bands, curves ,jointing & taping etc. as per drawing including providing cut outs, frame work &light fixtures, Speakers, Camera, Smoke detector, trap doors A/C grills, diffuser, sprinklers support etc. including All fixed with necessary fittings& accessories, complete including all lead, lift and heights. all complete as per drawings & specifications & to the complete satisfaction of the Engineer. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Durlum - Geo 9 open cell ceiling with cell size of 100x100mm made out Aluminium. Any equivalent proposed shall have to match technical parameter / specification of the tentative / suggested make.

Providing and fixing in position SUSPENDED FALSE CEILING SYSTEM / PARTITION SYSTEM USING CALCIUM SILICATE BOARDS 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings etc. complete as per specifications and as directed by the Engineer-in-Charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/ G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment). Note : Tentative / suggested make for guidance of bidder(s) : M/s. HILUX CEILING SYSTEMS of 8mm THICK CALCIUM SILICATE BOARDS or equivalent make

8mm THICK CALCIUM SILICATE BOARDS

Providing and fixing ANODIZED ALUMINIUM WORK FOR DOORS, WINDOWS, VENTILATORS and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately) etc. complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)

Extra for COLOUR ANODIZING / DYED ANODIZING

Providing and fixing Approved Quality STAIN LESS STEEL BODY ROLLER WHEELS of approved make for Sliding shutters

Providing and fixing approved quality and shape locks cum handle of approved make for sliding shutters. Note : Tentative / suggested make for guidance of bidder(s) : M/s. Star lock or equivalnet make

FILLING THE GAP WITH SILICON SEALANT between aluminium frame & adjacent RCC / Brick work / Stone work over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width.

Providing and fixing CP BRASS / COPPER INLET CONNECTION pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing 15mm PVC INLET CONNECTION SUITABLE FOR HOT AND COLD WATER 600 mm long with nuts and washers complete for wash basins/ Urinals etc. with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and Fixing CP brass 100MM DIA SHOWER ROSE WITH SHOWER ARM of Essco / Jaquar make as per specifications with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing C.P. BRASS TOWEL RAIL of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing C.P. BRASS OPEN STOP COCK of Heavy Quality of specified / approved make with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

15 mm n.b CP Brass open stop cock of approved make and type

Providing and fixing C.P. BRASS COCK of Heavy Quality of specified / approved make with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

15 mm n.b CP brass concealed stop cock of approved make

Providing and fixing 15mm C.P. BRASS SWAN NECK PILLAR COCK of heavy Quality of approved make and specied type complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing C.P. BRASS BIB COCK of heavy quality of specified / approved make with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

15 mm dia Bib Cock Jaquar continental model or approved Equivalent type and make .

Providing and fixing 15mm C.P. BRASS 2 IN 1 BIB COCK AND ANGLE COCK combination of Heavy Quality of approved make complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing heavy quality HEALTH FAUCET with 1.50 metres long flexible hose (Hand Shower / Hand Spray) of approved make with wall brackets and type complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing stainless steel TOILET PAPER HOLDER recessed type of approved equivalent and type with S.S screws complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and fixing heavy quality C.P. BRASS WASTE COUPLING of following dia for wash basin and sink, of approved make, size and quality, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded

Providing and fixing heavy quality STAINLESS STEEL 304 GRADE FLOOR DRAIN WITH LOCK & COCKROACH TRAP 5"x5" C.P. BRASS GRATING of RUHE make / approved equvalent make as specified for floor traps / nahani traps with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing, fixing & installing CP BRASS SOAP DISPENSER WITH GLASS BOTTLE of approved equivalent for Bathroom/Toilet with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - M/s. Jaquar / Hindware make or equivalent make

Providing, fixing & installing SS 304 GRADE HAND DRYER of premium automatic category for efficient & hygienic hand drying AC Type Motor of 25000 RPM, swift dry time of under 30 second & automatic sensor with 60 second withh auto cutoff, power rating of 1000Watts, Blowing Volume exceeding 270 CuM/Hr. at Air speed of 100 m/sec with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - M/s EURONICS make Model - EH270N or equivalent make

Providing, fixing & installing WATER BASED AIR-PURIFIER/AROMA-DIFFUSER/AIR-REVITALIZER/AIR-REFRESHER of Approved Equivalent with hydro purification technology for purification of air through water for removing odour, bacteria or any other air contaminants PM-2.5 with 1.5 Liter Tank, 1o-16 Watts Electric Supply, Voltage 240V, Rotating Speed 2200-2300 RPM, Air flow 100 CuM/Hr with all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - M/s. M/s CAREPURE make or equivalent make

Providing and Fixing SS 304 grade STRAIGHT DISABLED GRAB BAR (600 mm long & 32mm dia.) of approved equivalent in physically abled toilets inculding all necessary acessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - M/s. /s EURONICS make model EGR-01 or equivalent make

Providing and Fixing SS 304 grade SWING DISABLED GRAB BAR in physically abled toilets inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - M/s. /s EURONICS make model EGR-02 or equivalent make

Providing and fixing heavy quality CP BRASS BOTTLE TRAP 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and Fixing white VITREOUS COUNTER TOP / COUNTER BELOW WASH BASIN of size 610mm x 450 mm of approved make including making all connections but excluding the cost of fittings etc. complete all as per specifications inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing white VITREOUS CHINA EUROPEAN TYPE WATER CLOSET with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge. E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.

Providing and fixing white VITREOUS CHINA FLAT BACK HALF STALL URINAL size 580 x 380 x 350 mm / 610 mm of approved make with 15 mm C.P. Brass Presstomatic Auto Shut Urinal Flush Cock, with CP Brass flush pipe unions, Heavy Quality C.P. brass Spreaders, C.P waste coupling with dome grating, clamps complete inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing CHINAWARE HALF ROUND URINAL CHANNEL 100 / 150 mm dia with or without dead ends set in C.M 1:3 laid to proper slope & grade including finsihing the joints with polymer based tile grout mix inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing Brass 15 mm C.P auto shut urinal flush cock of approved make and quality as directed by the Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - Presstomatic series auto shut urinal flush cock of M/s. Jaquar make or equivalent make

Providing and fixing 15mm C.P. BRASS URINAL SPREADER size with 1/2" BSP thread and shapes, weighing not less than 60 gm of approved make and type complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing cast iron NAHANI TRAP / FLOOR TRAP of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2:4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing 6mm THICK MIRRORS of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Extra for providing and fixing approved make STAINLESS STEEL 304 GRADE STUDS (with wall spacers) for mirrors etc. inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing, Laying, jointing, fixing and testing Heavy quality (C-Class) GALVANISED IRON PIPES and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. of IS Code i.e. IS: 1239 as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting, threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

15 mm n.b. G.I pipe

20 mm n.b. G.I pipe

25 mm n.b. G.I pipe

32 mm n.b. G.I pipe

40 mm n.b. G.I pipe

50 mm n.b. G.I pipe

Providing & fixing in position heavy pattern screw down GUN METAL GATE VALVE with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

25 mm n.b.

40 mm n.b.

50 mm n.b.

Providing, supplying, laying, fixing & testing POLYPROPYLENE (PP) 3 LAYERED SOIL & WASTE PIPING SYSTEM AS PER 1451-1 in light grey RAL7035 color, To offer better low noise performance Equals or lesser than 10 dBA as per EN 14366 and VDI 4100 at a flow rate of 4 l/s suitable for drainage of hot and cold waste water and in accordance with all requirements for non-pressurized waste water piping as laid down in DIN EN 12056 and DIN 1986-100. Density of the pipe = 1.9 g/cm3, E-Modul 1800 N/mm2, Linear coefficient of thermal expansion = 0.06 mm/mK, Fire behavior classification according to DIN 4102, B2 and EN 13501 D-S3, d0 and to be suitable for transporting wastewater in the range pH 2 – 12 as per DIN EN 12056 and DIN 1986-100. The pipes and fittings are made of mineral reinforced polypropylene (PP) for improved noise reduction, Optimized three layer pipe structure for low noise levels push fit connections with a prelubricated elastomer seal (EPDM) for quick, easy and reliable installation. The sealings should be made from pre-lubricated elastomer seal in conformity with EN681-1, Should be resistant to hot water as per DIN EN12056, i.e. short-term exposure to temperatures of 95°C and long term exposure to temperatures of 90°C. This item includes jointing of pipes & fittings including testing the of piping network etc. complete all as per specifications, drawings and as directed by Engineer-in-charge. Note : Tentative / Suggested make for guidance of bidder(s) - M/s. ASTRAL Pipes Ltd. / M/s HULIOT or M/s WAVIN AS+ make or equivalent make

75 mm outer dia 3 LAYERED PP Pipe

110 mm outer dia 3 LAYERED PP Pipe

Providing & Laying SINGLE COMPONENT POLYURETHANE SEALANT for sealing all the joints of the pipe wherever it is required as per the instructions of Engineer-in-Charge and leave it for air curing for 24 hrs. The PU sealant should be in compliance with ASTM C 920, ASTM C 1248 for Non-Staining and Manufactured under ISO 9001 and should have the following properties: Density Approx. : ≥ or ≤ 1.54 g/mL; Skin over time: 10 - 15 minutes; UV Curing time: @ 23OC/ 50% RH hr 3 - 4 mm / 24 hr; Tensile strength (ASTM D412): 1.5 Mpa; Elongation at break (ASTM D412): 400%; Shore A Hardness (ASTM C661): 35 – 45; Application Temperature: 50 C to 350 C; Service Temperature: -300 C to 900 C; Maximum joint width: 25 mm; M A F: 25%. Note : 1. Tentative / Suggested make for guidance of bidder(s) - M/s. MCON MAKE MAGIC SEAL POLYURETHANE SEALANT or equivalent make, 2. 5 Years Warranty of the work will be in the form of Tri-Party Agreement submitted by the contractor.

Providing, Laying & Applying LIQUID PU MEMBRANE on the pvc pipes using brush or roller to achieve coverage of not less than 2.8 Sq mtr per Kg. Apply 1st Coat of polyurethane based single component Liquid PU Membrane and after 24 Hours of air curing, applying 2nd Coat of polyurethane based single component Liquid PU Membrane perpendicular to first coat by brush or roller to achieve coverage of not less than 1.8 Sq mtr per Kg. Allow air curing for 72 hours. The Liquid PU Membrane to be used should have the following properties: Colour: White/Grey, Specific gravity: 1.4 ± 0.1, Solid % :70 ± 5, Application temperature : 5 C to 50 C, Service temperature: 40 C to +70 C, Elongation (ASTM D 412): 400%, Tensile Strength (ASTM D 412): ≥2.5N/mm2 , Adhesion in peel test (ASTM C 836): ≥30N, Water permeability @5 bar, mm (BSEN 12390): Nil, Tear resistance (ASTM D624-00): 15 (KN/m), Water vapour transmission 2.3mm film (g/m /hr): 0.4 - 0.6, Initial hardness (Shore A) (ASTM D 2240): ≥50, Crack Bridging ability (ASTM C 836): No cracks upto 1.5 mm, Solar Reflectance Index ASTM E1980, White : 105%, Chemical resistance: Unaffected by mild acids, alkalis and water borne salt does not biodegrade Note : 1. Tentative / Suggested make for guidance of bidder(s) - M/s. MCON MAKE LIQUID PU MEMBRANE or equivalent make, 2. 5 Years Warranty of the work will be in the form of Tri-Party Agreement submitted by the contractor.

Providing and fixing 10mm THICK TOUGHENED GLASS SHELF WITH SS PROTECTIVE GUARD of size 15"x 10" or any other shape suitable at site of approved make with bevelled edges including SS Bracket/Fittings fixed to walls with C.P. brass screws, rubber concealed washers inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing 40mm width POP DECORATIVE CORNERS & MOLDINGS including SS Bracket/Fittings fixed to walls with C.P. brass screws, rubber concealed washers inculding all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1) Each Job shall be carried out by one qualified Degree holder Civil Engineer with 2 (Two) years experience or Diploma holder with 5 (Five) years experience (Licentiate in Civil/Construction Engineering / Technology) conducted by Board of Technical Examinations / University / Autonomous Govt. / Govt. recognized recognized Polytechnic/ Institute. (2) Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Engineer will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per month as per requirement at site for the period mentioned in NIT. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Engineer exclusively for the particular job. (5) Engineer should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Engineer will report to BARC Engineer/ EIC. (6) The minimum notice period before change of engineer is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1,915/- per day of shortfall in notice period will be levied on the contractor.

Carrying out Civil Engineering works like surveying & leveling, checking of form work fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Notes : (1) Each Job shall be carried out by one qualified Technician having minimum SSC with Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of not less than one year duration from ITI/Government Recognised Vocational Training Institute or experienced Technician retired from Government service. (2) Deployment: The contractor shall deploy one Technician for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in -Charge. (4) Mode of measurement : Measurement will be per job basis per day. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Technician will report to BARC Engineer/ EIC. (6) The minimum notice period before change of technician is 1 (One) month; failing which a compensation, for not providing technical support, of Rs. 1,206/- per day of shortfall in notice period will be levied on the contractor.

Providing & supplying of Pick-up light Non-AC vehicle of M/s. Mahindra & Mahindra Bolero Neo or equivalent make on hiring basis for the use of Site Engineer for 6 days a week from 8:00 am to 20:00 pm for carrying out day-to day official movement within Mumbai and BARC or Visit to EHPPL Kalyan, EBC, Kharghar for site visit purpose as assigned and directed by Engineer-in-Charge. (12Hrs. a day or 1200 km min per month as per certification of Engineer-in-Charge). Conditions: 1. The Vehicle shall be used by Departmental Engineers and departmental staff only. Since the departmental staffs are expected to use the vehicle on 6 days a week , the vehicle shall be kept free on Sundays and necessary maintenance may be undertaken. 2. The make and Model of the vehicle should be of year 2016 or later (with BS-IV norms ) for a minimum run of 12Hrs. a day or 1200 Kms per month. 3. The above rates shall be inclusive of cost of supply of Pick-light Non-AC vehicle, Fuel, wages of Drivers and other consumables etc. 4. The actual usage shall be reckoned from the Headquarter at BARC North Gate and end there itself during official use. 5. The Reporting time as instructed by EIC shall be considered for the billing / measurement / payment. 6. Break Down Hours as per actuals and Lunch break (30 min.) timings shall not be considered for payment. 7. Fraction of hours shall be rounded off to nearest half an hour at the time of preparing the Running / final bills. 8. BARC being a restricted place, the driver should have good credentials and should have a. valid Police Verification / Clearance Certificate (PVC), b. driving license, c. Name & address & Telephone No. of the driver including proof. They should be in a position to understand Hindi / English / local language. 9. The contractor should required to submit Registration Certificate of the vehicle , Comprehensive Insurance Policy and Road Tax receipts of the vehicle. The contractor should required to deploy same vehicle on day-to-day basis. 10. The make and model of the vehicle should not be more than 8 years old, roadworthy with all valid documents. 11. The vehicle shall be maintained in good running condition with good upholstery, fitness, good tyres and shall commensurate with the image of BARC. The tyres of the vehicles shall be replaced periodically for safe and incident-free driving. 12. The vehicle should be free from all sorts of defects and will be subjected to inspection by a representative of BARC whose decision shall be final and binding as regards suitability of that particular vehicle. 13. The vehicle should be a transport vehicle and preferably in white colour with a board "ON GOVERNMENT OF INDIA DUTY". 14. The cost of POL, maintenance and servicing of vehicle including replacement of parts, payment to the driver, Motor Vehicle taxes, comprehensive insurance, etc. shall be payable by the Contractor and BARC shall have no liability on these accounts. 15. The driver of the vehicle shall maintain Log book supplied by BARC and is required to obtain the signature of the user whenever the vehicle is used. 16. The cost of damages to any Government movable/immovable property in and around the site shall be entirely borne by the Contractor. 17. The rates are inclusive of all taxes if any, but excluding Goods & Service taxes (GST). 18. The contractor shall arrange adequate insurance coverage for his personnel. Department shall not be responsible for any liability arising out of any accident / injury caused to the driver while executing the job. 19. The contractor shall follow minimum wages act and other rules of Government of Maharashtra. 20. No revision of price shall be entertained during the period of contract. 21. In case of absence of Driver/vehicle for entire week, a compensation of Rs. 3000 /- per week, for not providing the service, will be levied on the contractor for that week. The Contractor should have one spare driver having valid PVC for replacement in case of emergency, sickness etc. of the regular Drivers. 22. In the event of breakdown of vehicle, alternative vehicle should be provided immediately. In case of failure to provide alternative vehicle within 2 hours, BARC would hire a vehicle on daily basis and the expenditure would be debited to your account besides imposing penalty of Rs. 500/- per day. 23. In case of absence of vehicle even for a day, proportionate payment towards a day will be deducted from monthly bill besides imposing a penalty of Rs. 500/-per day. 24. The charges for Extra KM over and above 1200 KM is fixed to Rs. 7.00 (Rupees Seven only) per KM.

Supplying and fixing CAST IRON MAN HOLE COVERS and CAST IRON STEPS of approved make and weight complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.

Providing and painting with 1st quality acrylic washable distemper (ready made) with Two coats on new work of approved make and manufacturer and of required shade and colour, including scaffolding, preparation of the surfaces etc., but excluding cement primer as per manufacturer's specifications and as directed by the Engineer-in-charge.

Providing and applying wall painting two coats on new work with PREMIUM PLASTIC EMULSION PAINT of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding, all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and Painting two coats of SYNTHETIC ENAMEL PAINT on steel surfaces of approved brand and manufacture to give an even shade without primer coat including preparation of the surfaces, scaffolding, all necessaey accessories complete as per design-patterns, drawings, specifications as directed & approved by Engineer-in-charge.

Providing and fixing 304 GRADE STAINLESS STEEL PLATES/PIPES of approved size and make and quality by cutting and placing in position including embedding if necessary complete as per specification and as directed by the Engineer in charge.

Providing and fixing 304 GRADE STAINLESS STEEL ROOM NO PLATE of Size 150mm x 100mm of matt polishing, grooving the Room No and Border on Plate as approved by Engineer-in-Charge and fixing with SS Screw at site etc. This work to be executed through approved specialized agency.

SITC of 15 WATT, LED down lighter with accessories as per TSS 1

SITC of 1 Module Flush Mounting MS Boxes with frame and cover plates as per TSS 2

SITC of 3 Module Flush Mounting MS Boxes with frame and cover plates as per TSS 3

SITC of 6 Module Flush Mounting MS Boxes with frame and cover plates as per TSS 4