Bhabha Atomic Research Centre Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Bhabha Atomic Research Centre - BARC Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date12 Nov 2024
Closing Soon29 Nov 2024
Tender Amount₹ 1,26,64,683
Costs
EMD
₹ 2,98,887Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BARC_834392_1Tender No
BARC/CSS/ET/33/2024-2025 Dated 07/11/2024Tender Authority
Bhabha Atomic Research Centre ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 100 m lead
20
-
-
Dismantling old plaster / skirting carefully , raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 100 m lead
500
-
-
Dismantling old ceiling plaster carefully and cleaning the surface for plaster including scaffolding disposal of rubbish to the dumping ground within 200 m lead etc. complete as directed by the Engineer-in-charge
50
-
-
Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge
5
-
-
Dismantling of RCC works including Cutting and stacking of steel reinforcement bars and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
5
-
-
Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
5
-
-
Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge
50
-
-
Dismantling C.I pipes of following dia in shafts / open piping including taking out the pipes manually, breaking lead caulked joints, melting of lead, making into blocks including stacking of pipes within a lead of 200 m as per direction of Engineer-in-charge
-
-
-
75 Dia C. I pipe
10
-
-
100 Dia C. I pipe
10
-
-
Dismantling G.I pipes of all diameter external work including excavation and refilling trenches after taking out pipes manually / by mechanical means including stacking of pipes within 100 m lead as per direction of Engineer-in-charge
30
-
-
Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge
20
-
-
Earth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete and as directed by the Engineer-in-charge. From 0.00 to 1.50 m depth from Average Ground Level
100
-
-
Lead charges for Lead Exceeding 1 KM but not exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. The rates in respect of this Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of Soil and 30% in respect of Debris from corresponding TRUCK Measurement.
-
-
-
Debris Beyond 1 Km but up to and including 2 km
100
-
-
Soil beyond 1 Km but up to and including 2 km
100
-
-
Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge
50
-
-
Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels
25
-
-
Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.
5
-
-
Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor. Using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor confirming to IS-1786
0.5
-
-
Providing, centering ,shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels. For Super Structure
30
-
-
Providing and laying (IPS Flooring) cement concrete flooring 1:2:4, using crushed sand 50 mm thick finished smooth to the required level, finishing with a floating coat of neat cement including cement slurry, curing, cleaning the surface neatly at the time of handing over the area complete as per specifications and drawings as directed by the Engineer in charge
50
-
-
Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made with strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge
50
-
-
Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge .
-
-
-
Up to and including 300 mm Joists, 350 mm channels, and below sections using materials confirming to IS:2062. All test reports to be provided along with the supply of the materials.
Notes : 1. Structural steel confirming to IS 2062 shall be supplied.2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates.3. Welding Electrodes of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted.5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.
Note : Tentative / suggested make for the guidance of bidder(s) : Welding electrodes of M/s. Advani Oerlicon / ESAB India & D&H or equivalent make
2
-
-
Providing and repairing to internal plaster in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50 metres lead
100
-
-
Providing 15 mm thick plastering using Ready mix internal plastering compound of approved make for internal faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in-charge
100
-
-
Providing 20 mm thick External plastering in two coats under layer 12 mm thick with C.M 1:4 (using crushed sand) finished with a top layer 8 mm thick in C. M 1:3 (using crushed sand) including approved water proofing compound @ 2% by weight of cement or as per manufacturer's specifications, sieving of sand to required fineness, scaffolding up to 10 metres height, finishing, curing etc. complete as per specifications. and as directed by the Engineer-in-charge
100
-
-
Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge
500
-
-
Providing and repairing to external plastering in cement mortar 1:4 (using crushed sand) of thickness 12 mm to 20 mm in patches of area up to 2.5 sq metres including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls ncluding admixtured with approved Water proofing compound @ 2% by weight of cement used and as per manufacturer's specifications ,sieving of sand to required fineness complete including disposal of rubbish to the dumping ground within 50 metres lead.
500
-
-
Providing Raised and cut pointing on stone with cement moratr 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.
500
-
-
Raking out joints in brick work / RR masonry work in cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 200 metres lead
200
-
-
Providing and Fixing Anchor Fastner of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings. 16 mm diameter 100 mm Long
10
-
-
Labour charges only for retriving wooden door shutters from frames (Chowkhat) of various sizes ,modifying, taking out damaged ply from the doors, replacing/bonding 3mm thick marine ply with suitable synthetic resin ( payment for 3mm thick ply only shall be paid under relevant item of the schedule), including cost of fevicol, synthetic resin, tools, tackles, nails, screws etc. all complete and refixing the same after complete repairs,re-sizing & refixing fittings, fixtures such as tower bolts,aldrop, door handle ,baby latch, mortice locks, night latch,hinges etc.( shall be paid separately under relevant item of this tender schedule ) etc. all complete for shutters including minor repairs to chowkhats, architraves, etc. as per site conditions and as directed.
-
-
-
Door frames with shutter of sizes up to 3 Sqm.( Single shutter )
20
-
-
Door frames with shutter of sizes above 3 Sqm.( double shutter)
5
-
-
Providing and fixing 35 mm thick flush door shutters conforming to IS : 2202 non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with internal teak wood lipping 25mm wide and fixing with 4 Nos of 125 mm long Stainless steel Hinges with S.S. wood screws complete.
20
-
-
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door including fixing 4 mm clear glass with necessary teak wood beadings complete all as per specifications and as per drawings.
5
-
-
Providing and fixing FRP door shutters flush door / panelled type with plain colour or wooden veneer finish of approved make, design & colour. made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum 100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foam and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws. 35 mm thick panelled door type of approved colours including the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws.
10
-
-
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
-
-
-
With clear float glass panes of 4.0 mm thickness
10
-
-
With clear float glass panes of 5.00 mm thickness
10
-
-
Repairing and refixing in position the existing damaged hydraulic door closer ( heavy duty No.3 ) involving following operations: I) Complete dismantling including removal of clamp bolt, main arm, top nut, ratchet, notch plate, removal of split oil, brass regulatory screws, spring etc. ii) Providing and fixing Evertite make( Confirming to I.S.35640) bottle type door closer spring for heavy duty door closer No.3 brass regulatory spring No.1 Part No.1 machine oil ( approx. 100 ml.) etc. Note.:- 1) The door closer repaired and spares replaced are to be handed over to Maintenance Unit for accounts. 2) The Agency may inspect the condition of door closers in premises prior to quoting. 3) The repairing and spares replacement shall stand for guarantee of six months trouble free operation with replacement of spares if any, defect occurs the same shall be attended by the Contractor.
-
-
-
'Left' / 'RIGHT " hydraulic door closer No.3
30
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate
10
-
-
Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer of approved make with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge.
20
-
-
Providing and fixing mortice latch and lock of approved make with 6 levers and a pair of handles Inside opening LEFT / Right with necessary screws etc complete suitable for fixing in wooden / steel/ FRP/ doors as per specifications.
20
-
-
Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge.
-
-
-
255 X 19 mm
30
-
-
Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections
20
-
-
Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked of approved make, transparent or dyed to requried colour or shade with necessary screws etc.
30
-
-
Providing and fixing anodised aluminium aldrops ISI marked of size 300 X 16 mm transparent or dyed to requried colour or shade with necessary screws etc. complete as directed by the Engineer-in-charge
10
-
-
Providing and fixing aluminium handles 175 mm long Inner grip 125 mm with 12 mm dia rod plate type BOW handles ISI marked of approved make, anodised transparent or dyed to req. colour or shade with necessary screws etc. complete.
30
-
-
Providing and fixing Minimum 15 to 17 mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut Granite of Telephone Black colour for kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete as directed by the Engineer-in-charge at all levels
20
-
-
Extra for providing edge moulding to 15 to 17 mm thick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.
40
-
-
Making holes in RCC Slabs / chajjas / brickwork/granite for providing & fixing G.I. 100 / 80 mm Dia. spout/pipe along with filling concrete around the embedded pipe, finishing the damaged plaster with paint etc. making good complete and as directed by Engineer-In- Charge.
10
-
-
Providing and fixing aluminium hanging heavy quality floor door stopper ISI marked with twin rubber stoppers, anodised transparent or dyed to required. colour or shade with necessary screws etc. complete.
30
-
-
Providing and fixing IS:12817 marked stainless steel butt hinges of size 125 x 64 x 2.5 mm (heavy weight) of approved make with suitable stainless steel screws etc. complete as directed by the Engineer-in-charge
50
-
-
Providng and fixing Aluminium Grill 10 mm thick of required design and pattern in natural Silver anodising of min 15 Micronswith a opening size of 60mm x 45mm and Minimum weight of 4.12 Kg/ Sq.M including providing anfd fixing Suitable 'F' / 'H' section outer frame and mullion fixing with screws complete all as per specifications and as directed at site by the Engineer-in-charge. Aluminium alloy shall be of 6063-T6 with yield strength of minimum 6.5 kg/ sq.mm. Note : Tentative / suggested make for guidance of bidder(s) : Model No. DG- 202 of M/s. DECO GRILLE or equivalnet make
10
-
-
Extra for providing Aluminium Grill 10 mm thick with colour anodised by the manufacturer (Champagne, black, Bronze, Gold colours) complete all as per specifications and as directed at site by the Engineer-in-charge
10
-
-
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
Notes : 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for.
-
-
-
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
200
-
-
Extra for colour anodizing
200
-
-
Providing and fixing approved quality and shape locks cum handle of approved make for sliding shutters.
Note : Tentative / suggested make for guidance of bidder(s) : M/s. Star lock or equivalnet make
20
-
-
CARRYING OUT MANUAL MISC. CARPENTRY / PLUMBING JOBS like minor repairs, fixing fitting and fixtures etc. as and when required and as directed by the Engineer-in-charge Note: 1. Labours shall bring necessary carpentary / plumbing tools. 2) Payment shall be made as per the Log book duly approved by the Enginner in charge. 3) The log book shall consist of the day-to-day attendance of complaints/ work assigned and the time taken to attend each activity . The total time of 8 hrs. shall be considered as ONE manday. 4) Contrator shall arrange necessary Police Verification Certificate for the workers engaged for the work.
-
-
-
SKILLED CARPENTER (CARPENTRY WORKS) with valid Police Verification Certificate for entire contract period.
300
-
-
SKILLED PLUMBER (WATER & DRAINAGE WORKS) with valid Police Verification Certificate for entire contract period.
300
-
-
Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters
20
-
-
Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade
100
-
-
Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and 300 - 600 mm wide and thickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved by Engineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge
10
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make. shade and colour of size ranging from 300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints with matching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge.
50
-
-
Providing and laying minimum 25 mm thick uniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtain mirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete.
30
-
-
Providing and constructing brick work in cement mortar using Standard bricks of approved quality / class, make / brand in super structure above plinth up to Floor-II level in all shapes and sizes including curing, raking out joints complete as per specifications and as directed by the Engineer-in-charge.
-
-
-
Brickwork in super structure with standard bricks in C.M 1:4 using crushed Sand
5
-
-
Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications.
50
-
-
Providing structural repairs in old damaged concrete structures / surfaces with approved Polymer with following operations 1) Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water 2) Cleaning the re bars with Acetone for complete rust removal and washing with water to make the surface clean. 3) Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5 (1 part of polymer and 1.5 parts of cement in synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : washed and dried river sand 87.50 kg ; silica sand 37.50 Kg. mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg washed and dried river sand ; 0.75 Kg silica sand : 200 ml polymer)5) If thickness of repair exceeds 20mm , after every 20 mm thick repair, bond coat as per 2 above to be applied and further thick of repair to be continued for each layer. This work is inclusive of all materials, labour, complete all as directed at site using approved polymer suitable for structural repair shall be used), Note : Scaffolding will be paid seperately under relevant item.
1000
-
-
Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding
500
-
-
Removing white or colour wash, distemper, external paint by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete all as directed at site including scaffolding, cleaning of the areas.
2000
-
-
Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
3000
-
-
Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including cleaning complete all as directed by the Engineer-in-charge
2000
-
-
Providing, applying one coat of primer with ready mixed red oxide primer of approved brand and manufacturer on steel works including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
500
-
-
Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
500
-
-
Providing , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge.
-
-
-
15 mm dia G.I pipe
50
-
-
20 mm dia G.I pipe
50
-
-
25 mm dia G.I pipe
30
-
-
32 mm dia G.I pipe
20
-
-
40 mm dia G.I pipe
20
-
-
50 mm dia G.I pipe
50
-
-
Providing and fixing CHLORINATED PVC (CPVC) PIPES of approved make having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer.
-
-
-
15 mm outer dia CPVC pipe (External) / open
5
-
-
20 mm outer dia CPVC pipe (External) / open
5
-
-
25 mm outer dia CPVC pipe (External) / open
5
-
-
Repairing of bibs tap/pillar tap/stop cock etc. by changing with the spindle, new washers etc. as per site requirement & directed by Engineer-In-Charge.
50
-
-
Removing existing, damaged non workable sanitary fittings/ water supply fitting & replacing with new approved fittings as per site requirement & directed by Engineer-In-Charge.
-
-
-
Flexible pipe of 1-1/4" dia. of required colour and upto 900mm length
30
-
-
Flush handles for flushing tank of approved make & of required type.
Note : Tentative / Suggested make for guidance of bidder(s) : Flush tank of M/s. slimeline make or equivalent make
30
-
-
Washers of flushing system of E.W.C.
30
-
-
100 mm dia. S.S./ C.I. Nahani trap Jali
20
-
-
Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long
30
-
-
Providing and fixing PVC inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 450 mm long
30
-
-
Providing and fixing CP brass / copper inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long
20
-
-
Providing & fixing approved type heavy duty liquid SOAP DISPENSER / SS Soap Dish etc. fixed to wall with C.P. brass screws, & screwed on to wooden rawl plugs etc. complete.
Note : Tentative / Suggested make for guidance of bidder(s) - M/s PERK / ESSCO or equivalent make
50
-
-
Providing and fixing C.P brass towel rail of approved make 600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge.
20
-
-
Providing and fixing brass ball cock of heavy quality of following sizes with arm rod and Plastic Ball floats complete as per specifications and as directed by the Engineer-In- Charge.
Note : Tentative / Suggested make for guidance of bidder(s) : M/s. TECHNO make or equivalent make
-
-
-
20 mm dia.
2
-
-
25 mm dia
2
-
-
50 mm dia
2
-
-
Providing and Fixing CP brass 100 mm dia shower rose with Shower arm of Specified make as per specifications and as directed by Engineer-in-charge complete
20
-
-
Providing and fixing C.P Brass open stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge
-
-
-
15 mm n.b CP Brass open stop cock of approved make and type
10
-
-
Providing and fixing C.P brass concealed stop cock of Heavy Quality of specified / approved make as per specifications and as directed by the Engineer-in-charge.
-
-
-
15 mm n.b CP brass concealed stop cock of approved make
5
-
-
Providing and fixing C.P brass bib cock of heavy quality of specified / approved make as per specifications and as directed by the Engineer-in-charge.
-
-
-
15 mm dia bib cock of approved type and make .
25
-
-
Providing and fixing C.P brass Angle cock of heavy quality of specified / approved make, for wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge.
-
-
-
15 mm n.b CP brass Angle cock of approved make
10
-
-
Providing and fixing 15 mm C.P brass 2 in 1 bib cock and Angle cock combination of Heavy Quality of approved make as per specifications and as directed by the Engineer-in-charge
10
-
-
Providing and fixing 15 mm C.P brass pillar cock of heavy Quality of approved make and specied type as per specifications and as directed by the Engineer-in-charge.
20
-
-
Providing and fixing Heavy Quality 15 mm C.P brass pillar cock ELBOW operated of approved make as per specifications and as directed by the Engineer-in-charge.
1
-
-
Providing and fixing heavy quality health faucet with 1.50 metres long flexible hose (hand shower) of approved make with wall brackets and type as per specifications and as directed by the Engineer-in-charge
20
-
-
Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, 'Y' collars, cowl etc for soil, waste and ventilation pipes conforming to IS.3989 or Cast Iron hubless pipes confirming to IS 15905 of approved make including cost of jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site.
-
-
-
75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905
20
-
-
100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kg lead / joint or Cast Iron hubless pipes confirming to IS 15905
20
-
-
Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make and weight as specified in the drawings or as directed by the Engineer in charge.
100
-
-
Providing and fixing Heavy quality flexible PVC waste pipe of following dia. (semi rigid or flexible) of approved make for sink or wash basin including PVC waste fittings etc. complete all as per specifications and as directed by the Engineer-in-charge.
-
-
-
32 mm dia flexible PVC (semi-rigid) waste pipe
30
-
-
Providing and painting walls with (TWO coats) of approved shade of high build protective , elastomeric water proof exterior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in-charge.
3000
-
-
Providing and fixing Indian water closet (Orissa pan) of apperoved make with 100 mm China ware P or S trap, One no. 10 litre High level or low level white PVC flushing cistern with flush pipe & bend with manually controlled device (handle lever) conforming to IS:7231, PVC 15 mm Inlet connection with all fittings and fixtures complete including all connection, embedding in position commissioning, cleaning etc. all as per drawings and specifications and as directed by the Engineer-in-charge.
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm
5
-
-
Providing and fixing white vitreous china European type Water Closet with 'P' or 'S' Trap with solid seat and lid of approved make, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS:7231, flush bend, fixing EWC with C.P brass screws, 15 mm PVC heavy quality inlet connection of 450 mm long, including testing , commissioning & cleaning etc. complete all as per drawings and specifications and as directed by the Engineer-in-charge.
-
-
-
E.W.C. pan in White colour with ISI marked white solid plastic seat and lid.
2
-
-
Providing and fixing PVC low level / high level flushing cistern 10 litre capacity of approved make in white colour with flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge.
20
-
-
Providing and fixing Brass 15 mm C.P auto shut urinal flush cock of approved make and quality as directed by the Engineer-in-charge.
Note : Tentative / Suggested make for guidance of bidder(s) - Presstomatic series auto shut urinal flush cock of M/s. Jaquar make or equivalent make
20
-
-
Providing and fixing CP brass / copper inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 450 mm long
10
-
-
Providing and fixing white vitreous china flat back half stall urinal size 580 x 380 x350 mm / 610 mm Aquaseal model of approved make with approved make 32mm C.P flush value with standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge (Only G.I. pipes will be paid under relevant Item )
-
-
-
Single half stall urinal with C.P brass Flush valve.
6
-
-
Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating , complete all as specifications and drawings and as directed by the Engineer-in-charge
5
-
-
Providing and fixing heavy quality CP brass bottle trap 31 / 32 mm of approved make single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal,of approved make for wash basins / urinal etc all as per specifications and directed by the Engineer in charge.
20
-
-
Providing and fixing 15 mm C.P brass urinal spreader size with 1/2" BSP thread and shapes, weighing not less than 60 gm of approved make and type.
20
-
-
Providing and fixing heavy quality C.P. brass waste coupling of following dia for wash basin and sink, of approved make, size and quality all as directed complete.
-
-
-
C.P Brass Waste coupling 32 mm Dia of approved make Half threaded or Full threaded as per requirement.
20
-
-
Removing the damaged G.M Gate Valve, Providing and fixing New GM Gate valves of approved make with handle wheels as per IS: 778
-
-
-
15 mm n.b
20
-
-
20 mm n.b
10
-
-
25 mm n.b
5
-
-
40 mm n.b
2
-
-
50 mm n.b
2
-
-
Providing and fixing white vitreous counter top wash basin of size 610mm x 450 mm of approved make including making all connections but excluding the cost of fittings etc. complete all as per specifications and as directed by the Engineer-in-charge
10
-
-
Providing and fixing white vitreour China laboratory sink of size Size 600 x 450 x 200 mm including making all connections but excluding the cost of fittings etc. complete all as per specificatios and as directed by the Engineer-in-charge
1
-
-
Providing and fixing solid plastic seat of approved colour suitable to existing EWC with lid including CP brass / SS bolts, screws etc. for pedestal type W.C. pan complete as per specifications and as directed by the Engineer-in-charge
15
-
-
Providing and fixing Satin finish stainless steel AISI 304 (18/8) kitchen sink of size 610 x 510 mm without drain board and bowl size 545 x 445 x 200 mm depth as per IS13983 of approved make, with C.I. brackets, fittings and stainless steel plug 40 mm including painting the fittings and brackets with 3 coats of white enamel paint over a coat of primer, cutting and making good the walls wherever requried complete as per specifications and as directed by the Engineer-in-charge.
2
-
-
Providing and fixing 6 mm thick mirrors of size 600 x 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P. brass screws and concealed washers complete. all as per specifications and as directed by the Engineer-in-charge .
30
-
-
Cleaning and removal of sewage/drainage wastes, muck etc. from horizontal, inclined & vertical C.I./PVC/lines of all dia. ( burried/exposed) ,secondary traps, Sewage inspection chambers, manhole chamber and all other drainage/ sewage disposal facilities from centralised chambers including all the external sewage / drainage lines of TSH, NBH, HBNI etc. building and its surrounding premises including all the sewage / drainage lines around and inside canteen connecting to centralised collection/ pumpimg sump mechanically/ manually as desired and directed by department including cost of labour,tools,tackles,plants, machines,transportation all complete in all respect and as directed by Engineer in charge.
Note. :- Water shall be supplied free of cost & the contractor has to make their own arrangements for the hose, pumps etc. for the flushing of all the chambers, open drains and coonecting sewage / rain water pipe lines to the chambers including trolly for disposal of garbage.
18
-
-
Opening of nahani trap and removing nahani trap jalli and cleaning the complete trap system and refixing the same with white cement etc. and as directed by Engineer in charge.
20
-
-
Opening of bottle trap from its joint and cleaning the complete trap system and refitting,refixing same to sinks,wash basins etc. and as directed by Engineer-In- Charge ( Note:- If bottle trap is found in unused condition it will be supplied by department at free of cost).
40
-
-
Cleaning and removal chokages of sewarage wastes,muck,frozen sewage cakes etc. from EWC/IWC/AIWC manually, including cost of labour tools, trooly of sewage muck for disposal of designated place, all complete in all respect and as directed.
20
-
-
Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm depth and 5 mm width
60
-
-
Removing of silt, dry leaves etc completely from the bed of open nallah, drains and disposing the removed earth witnin a lead of 50 m during monsoon period. The rates are including removing of green wild creeper etc. silt thickness upto 100 mm in height. Upto 3 m depth.
-
-
-
1500 mm to 3000 mm wide at bottom
4000
-
-
Providing and fixing 50 X 20 mm wooden moulded beading to using 2nd class teak wood to door and window frames with iron screws, plugs and priming coat on unexposed surface complete
10
-
-
Removing glass panes including removing damaged glass and replacing with new glass, including putty and nails wherever necessary in wooden partitions / wooden doors.
-
-
-
Plain float glass panes of thickness 4.00 mm
5
-
-
Plain float glass panes of thickness 5.00 mm
5
-
-
Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete.
-
-
-
250 mm Dia RCC Hume pipe class Np2
10
-
-
Providing, supplying and fixing hollow metal flush steel doors 40 mm thick of approved make consisting of door frame and shutters and all hardware fittings, frame made out of 14g thick G.I sheets and shutters made of 16g thick sheets, hollow portion filled with puff, including necessary stiffners in shutters and frame, vision panel of specified size with 4 mm glass and clip on pressed steel frame for vision panels, fixing 4 nos heavy duty stainless steel 304 grade ball bearing hinges, mortise / dead lock of approved make, a pair of 200 mm long stainless steel handles, 250 mm long stailless steel tower bolt, etc. frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete, fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge
10
-
-
Providing and fixing in position suspended false ceiling system using 600 x 600 mm mineral fibre reinforced factory applied vinyl painted ceiling tiles having 16/15mm thick, and approvred surface design and edge profile tegular or equivalent placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 32mmx shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters. The cross tees of size 24 x 27 x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 25 x 600mm shall be inserted to form a grid size of 600x600mm resting on the perifery walls on wall angles of size 24mm x 24mm including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of metal dash fastners of 6mm x 50mm, soffit clits of 25mm x 35 x1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/sq.m. (Only false ceiling area will be measured for the purpose of payment).
Note : Tentative / suggested make for guidance of bidder(s) : M/s. ARMSTRONG DuneMax/ Sabbia-19 mm thick model or equivalent make
-
-
-
600 x 600 mm false ceiling
50
-
-
Providing and fixing G.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plastering complete all as directed by the Engineer-in-charge. (only area of the chicken mesh used alone will be measured)
20
-
-
Providing and constructioning Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item)
2
-
-
Extra depth over initial depth of 900 mm for chambers of 900 x 600 mm internal size.including fixing cast iron steps (C.I steps shall be paid under relevant item)
2
-
-
Cleaning of Drains during Monsoon period from the bed of drains of flowing water at full bottom width at various locations and depth upto 3 mtr from the Ground level by removing silt, wild vegetation green/ dry, creepers from the sides of drains if any for smooth flow of water including disposing the removed materials within a lead of 50 mtr. & as directed by Project Engineer.
5000
-
-
Cleaning of dry leaves, dust, silt, scrap material, vegetation, bushes, fungus, algae, green wildcreepers and like other loose material sich as brick bats, metal etc. from flat/ slope roofs, rain water gutter, parapet, chajjas, catwalks and cleaning the rain water down take pipes, water spout pipes at all heights etc. and as directed by the Project Engineer during the entire monsoon period. the rates including cost of polythene bags. the collected debrises shall not be thrown from terrace. the collected debrises shall be kept at one place for further transportation of dumping yard.
8000
-
-
Carrying out circular holes of various mm dia. size in RCC slab at various levels using Non Vibrational core drilling machine attached with circular Diamond cutting core bit as required at site & as per instruction of Engineer-in-Charge including labour, material, machine, consumable tools & tackles etc. with safety precaution etc. complete. Breaking of brick bat coba and plaster will measured and paid in relevant items.
-
-
-
Core cutting in RCC beyond 50 mm up to and including 100 mm Dia
1
-
-
Core cutting in RCC beyond 100 mm up to and including 150 mm Dia
2
-
-
Providing and fixing decorative high pressure 1.0 mm thick laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S including cost of adhesive, labour etc. complete as directed
20
-
-
Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge
5
-
-
Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge
-
-
-
Galvalume sheet roofing 0.50 mm Thickness in Single sheet
20
-
-
Providing and fixing STAINLESS STEEL mosquito proof wire mesh made from Stainless steel of grade 304/304L in aluminium windows, ventilators, shutters etc. with PVC / Neoprene gasket etc. complete including cost of wire mesh, neoprine gaskets, screws and other fitting materials comple as per the architectural drawings and directed by the Engineer-in-Charge (Cost of Aluminium snap beading shall be paid seperately under relevent item.)
-
-
-
S.S Mesh - (Mosquito net)- 0.50mm thick- 144 Apeture in Sq. Inch
20
-
-
Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-in-charge
20
-
-
Clearing Jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m / outside the periphery of the area cleared as per specifications and as directed by the Engineer-in-charge
5000
-
-
Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge
5
-
-
Providing and painting TWO coats of synthetic enamel paint on concrete or plastered surfaces of approved brand and manufacturer of required colour to give an even shade over an under coat of suitable shade primer of approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge
1500
-
-
Providing, supplying, fixing in position ready made pre-cast RCC fencing post of minimum size 100 mm x100 mm x 1500mm in Peripheral boundary including excavation, painting with Red & white colour Synthetic Enamel paint, etc. all as directed by the Engineer-in-charge
200
-
-
Providing, Supplying and fixing water tight roofing of Poly Carbonate hollow or fluted Three layers multi wall UV resistance poly carbonate sheet of 10 mm thick in plain/clear/coloured with all necessary framing work make of steel Tubular section of dimension 50 mm x 50 mmx 2.9 mm square painted with epoxy primer and 2 coat of polyurethene paint jointly ploycarbonate sheet with suitable aluminium sections anodized with 15 microns black satin finish with EPDM gaskets and self tapping screws (cost inclusive of designing, preparation of shop drawings, fabricating and errection of tubular section frame work scaffolding for joining poly consumable as per approved drawings and as directed at site).
Note : Tentative / Suggested make for guidance of bidder(s) : M/s. Tufflite or GE compact or Shah Polymers make or equivalent make (Polycarbonate Sheet) and M/s. TATA STRUCTURA make or equivalent make (tubular structure section)
50
-
-
Carrying out Civil Engineering works like surveying & leveling, checking of form work fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Notes :
(1) Each Job shall be carried out by one qualified Technician having minimum SSC with Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of not less than one year duration from ITI/Government Recognised Vocational Training Institute or experienced Technician retired from Government service. (2) Deployment: The contractor shall deploy one Technician for each job as Single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in -Charge. (4) Mode of measurement : Measurement will be per job basis per day. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Technician will report to BARC Engineer/ EIC. (6) The minimum notice period before change of technician is 1 (One) month; failing which a compensation, for not providing technical support, of Rs. 1,206/- per day of shortfall in notice period will be levied on the contractor.
425
-
-
Providing and fixing motorized arrangements (with remote & manual operation) to existing Rolling Shutter including designing, control panels, limit switches,required wiring and cables from panel to motor and required size of shaft etc of approved make all as per standard specifications including commisioning and testing complete as directed by the Engineer-in-charge.(only power supply point will be provided)
-
-
-
For rolling shutters up to 15.00 sq.m opening area.
5
-
-
Providing, Supplying and replacing in position wherever required the following parts after removing the damaged old part carefully including all labour, taxes, duties, scaffolding, transport, welding, drilling, grinding, tools, tackles etc. and with applying one coat of primer wherever required, including transporting the dismantled M.S/ metal scrap and depositing at EHPPL stores as directed by the Engineer-in-charge at site. Up to 5.00 M Height
-
-
-
G.I .lathe sections 75mm wide & 18g thick
40
-
-
M. S. bottom rails (pressed type 10G with locking arrangement, handles, etc. in both ends and sides.
30
-
-
Providing, supplying , fabricating and assembling Shaft asembly for Rolling shutters using Heavy M.S. Pipes, springs & ring pully complete including erection.
10
-
-
Providing, supplying , fabricating and fixing M.S. hood cover with 0.90 mm thick M.S sheet with supports for rolling shutters complete including erection
10
-
-
Providing, supplying and fixing M.S. guide channals with supports for existing rolling shutters complete including erection.
10
-
-
Providing, supplying and replacing in position wherever required the following parts after removing the damaged old part carefully including all labour, taxes, duties, scaffolding, transport, welding, drilling, grinding, tools, tackles etc. and with applying one coat of primer wherever required, including transporting the dismantled M.S/ metal scrap and depositing at EHPPL stores as directed by the Engineer-in-charge at site.
-
-
-
Providing, supplying and fixing Springs in Rolling shutter Shaft including necessary bolt& nuts complete including erection. For rolling shutter up to 5.00 metres height
10
-
-
Providing, supplying and fixing ball bearing to existing rolling shutters complete including erection.
20
-
-
Providing, supplying and fixing gear box complete set with gear wheel, handle etc full assembly complete including erection.
2
-
-
Providing, supplying and fixing Side Brackets for Rolling Shutters Complete including erection.
10
-
-
Servicing of the following type of rolling shutters of different sizes maximum size upto 6m x 7m including dismantling for over-hauling of individual parts for repairing and refixing after repairs i.e. top hood shaft cage, shaft case shaft brackets, springs, main curtain with lathe or mid bar type grills, wicket gate, side guides bottom tails, gear units, bearings, electric motors, starters and thoroughly cleaning all the components, adjusting the tensioning springs, if required overhauling or repairing shaft and gear units, re-conditioning end clips, re-aligning curtain ends, reconditioning dents if any, on the surface bottom rail and side guides, repairing the starter, inspecting, taking out and replacing the damaged or defective components (replacement of parts at extra rate is shown under item No.2 below), ensuring proper locking arrangements from both side and outside including all welding, drilling straightening, grinding, scaffolding, ladders, tools, tackles, with all consumables, such as lubricants, kerosene, grease etc. and shall hardware such as nuts, bolts, rivets, washers, keys, etc. making good any damages to civil works, cleaning, oiling, greasing and demonstrating proper functioning of the shutters after each service such as nuts, bolts, rivets, screws, washers, keys and necessary scaffolding etc. all complete as per direction of Engineer-in-charge at site.
-
-
-
Electrically operated type with lathe or grilled curtain, mechanical gear operated and pull & push type rolling shutters. (All types of Rolling shutters) Note : 1) Measurement will be done once only, for entire contract period.
2) The measurement of Rolling shutters will be as per structural openings, Hood etc. will not be measured separately.
200
-
-
Labour charges for constructing Random Rubble masonry using Rubble Stone available at site in foundation and plinth in C.M 1:6 (using crushed sand) including cost of bond stones, raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications.
25
-
-
Providing & Applying SEAMLESS ACRYLIC BASED CHEMICAL WATERPROOFING SYSTEM with minimum 1 mm DFT (Dry Film Thickness) including surface preparation as per general notes, primer coat, reinforcing membrane (minimum 45 GSM) and multiple layers of chemical coat (2 to 3 coats as per manufacture specification), removing the existing damaged water proofing treatment, if any, all complete as per the manufacturers specifications and as directed by Engineer-in-Charge, using Damp Proof all conforming to the following technical specifications or standard to satisfy the site requirements. Chemical properties: (i) Physical/chemical parameters such as specific gravity, solid contents, Tensile strength, viscosity etc. shall be tested as per relevant test method of IS/ASTM/DIN and shall conform to the approved manufactures product and specification. (ii) Elogation: 100% minimum (iii)UV Resistant: Continuous 500 hrs (min) as per ASTM D4587.
Note : Tentative / suggested make for guidance of bidder(s) : M/s. Smartcare Damp Proof of M/s. Asian Paints make or equivalent make
-
-
-
Over terrace slab, top of water tank and parapet etc. at all levels.
3000
-
-
Providing and fixing 25 mm thick Colour PVC Integral Foam Sheet door shutters flush door of approved colour, of approved make or equivalent, design, colour and fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges, Fixing of Stoppers, tower bolts, baby latch, aldrop, handles etc.wherever required with S.S. screws (Stopper, Tower bolt, Baby latch, Aldrop, Handels etc Shall be supplied by department) etc. complete as per specifications and as directed by Engineer-in-charge. Note : The door should satisy the following technical parameters as under:
1. Density : 0.475 to 0.55 g/cc,
2. Hardness (Shore 'D'): min. 55,
3. Water absorption : max. 1 %,
4. Tensile strength : min. 13 MPa,
5. Elongation : min. 15 %,
6. Flextural Strength min. 30 MPa,
7. Compressive Strength at 10% Deformation : min. 3 MPa,
8. Vicat Softening Temperature: more than 75 Deg Celcius
9. Flammability: classification B : S3 : D0 (to be tested as per NF EN 13501-1 standard)
50
-
-
Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge.
150
-
-
Providing and fixing concertina barbed type coil of follwoing dia. made from M.S galvanized ribbon tape of 0.5 mm thickness, 19 mm width stretching the coil to 9 m approximate, fixing the coil with clips between "Y" armed and MS angle posts 2.44 m high from ground level, including supplying and fixing MS galvanized clips etc. complete as per manufacturer's specification and including painting by dipping method the concrtina tape coil with two coats of synthetic enamel paint of approved shade and make over a coat of approved primer at fabrication shop, before bringing the material to the site and fixing in position etc. complete as directed by the Engineer-in-charge.
-
-
-
450 mm Dia Concertina coils
200
-
-
Fencing with RCC post placed at required distance, embedded in cement concrete blocks every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post etc. complete as directed by the Engineer-in-charge. (cost of RCC posts, struts, earth work and concrete to be paid for separetely) : Payment to be made per metre cost of total length of barbed wire used
-
-
-
With G.I. barbed wire 12 swg
1300
-
-
Providing and fixing in position suspended seamless false ceiling system using 12.50 mm thick moisture resistant plain gypsum board suspended ceiling, which includes CRP surface ribbed perimeter channels (having one flange of 20mm and another flange of 30mm and a web of 27mm) along the perimeter of ceiling, screw fixed to brick wall/partition with the help of nylon sleeves and screws, at 610mm centres. Then suspending CRP surface ribbed intermediate channels of size 45mm (with two flanges of 15mm each) from the soffit at 1220mm centres with CRP surface ribbed ceiling angle of width 25mmx10mm fixed to soffit with GI cleat and steel expansion fasteners. CRP surface ribbed Ceiling section of having web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the channel at 457.5mm centres. Single layer of 12.5mm tapered edge (conforming to BS 1230 part 1) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc jointing compound, Gyproc joint paper tape and two coats of drywall top coat. Note : Tentative / suggested make for guidance of bidder(s) : GYPROC.MR of M/s. Saint Gobain or equivalent make make
50
-
-
Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1) Each Job shall be carried out by one qualified Degree holder Civil Engineer with 2 (Two) years experience or Diploma holder with 5 (Five) years experience (Licentiate in Civil/Construction Engineering / Technology) conducted by Board of Technical Examinations / University / Autonomous Govt. / Govt. recognized recognized Polytechnic/ Institute.
(2) Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Engineer will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account.
(3) Period of work: The contractor shall carry out number of Jobs per month as per requirement at site for the period mentioned in NIT.
(4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Engineer exclusively for the particular job.
(5) Engineer should be engaged after scrutiny by EIC of CSS, BARC and approved by Competent authority and the deployed Engineer will report to BARC Engineer/ EIC.
(6) The minimum notice period before change of engineer is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1,579/- per day of shortfall in notice period will be levied on the contractor.
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%