Western Railway Tender

Providing and fixing Stone Pillars/ RCC Pillars of Size 1300x250x250mm along the proposed land 4 boundary and for Benchmarks as per terms of reference & relevant provisions of Indian Railways Code for Engineering Department (1999,Third Reprint) with up to date correction Slips and as directed by the Engineer-in- charge on straight and curves as per Scope of Work & Technical Specifications with Contractors' own materials,tools and plants; including all leads and lifts, transportation,making own service roads for leading of stones & materials and crossing of track etc.; including all taxes and royalties complete;including painting, marking the pillars at site; The rate includes the cost of all materials including erection of stones etc., Location of Stone pillars.1) Erection of boundary pillars at every 50 mts interval or at every change of location of boundary, which eeveris less with 700mm projection above the ground level and600mm below GL at earmarked location, embedding in CC (1:4:8) of 400x400x700mm size base concrete, duly marking the distance of the centre line of proposed line from theboundary.2) Bench marks shouldbe marked with 700mm projection above the ground level and600mm below GL at earmarked location embedding in CC (1:4:8)of 400x400x700mm size base concrete, at intervals of not more than one kilometre along the line and at sites of important bridges,duly marking BM Number / Value/ Chainage. In every case the position chosen for a bench mark should be such that it can be conveniently referred to during construction and is, at the sametime, not liable to be interfered with during the progress of construction. 3) Boundary pillar /Benchmarks Pillars are to be painted with RED paint for identification and markings in white or black paint. " 4) Boundary pillars are to be painted with boundary distance and direction of increase/decrease of width. 5) 'WR' has to been graved on all types of pillars and painted with white or black paint

Preparation of land plans and completion drawing in auto cad on the basis of joint measurement plan of land acquired by Western Railway Km wise or as directed by engineer in charge. The drawing prepared 5 should be as per requirement of Western Railway for handing over of land to Western Railway. Items includes preparation of land acquired area statement on drawing and corrected the drawing if required after joint verification and submission of drawing in five hard copies as well as soft copy in CD and also one print copy on tracing paper film 75 micron matt as approved by Western Railway with all Consultant's own stationary/printing/consumables etc.complete in all respect

Facilitating Western Railway and Co-ordination for taking signatures of concerned officers of 6 revenue department, Western Railway on land plan drawing after carrying out joint verification,and submission of drawings duly signed to Western Railway with consultant"s own man power,consumables including transportation etc.complete in all respect. ( Per Village = Each )

Xeroxing of all documents in A4 size such as indent placed on revenue authority for acquisition of 7 land,Shajara duly verified , Notification under section 4,Declaraton under section 6 ,Copy of award,handing and taken over note,Attested copy of mutaton,land plan duly verified by the revenue authorities showing detail of mutation including consultant's own, man power, consumables, including transportation etc. complete in all respect. (Each Page = Each )

Preparation of plastic folder file village wise properly binding in and submission including consultant's own, man power, consumables, including transportation etc. complete in all respect (Per File = Each )