Western Railway Tender

Designing of foundation, substructures, super- structure including preparation of drawings etc. as 4 per direction of engineer in-charge for ROB to be constructed in lieu of L.C. to suit Rly. GAD. Design is to be based on the geotechnical result which will be supplied by the Rly., rates shall also be inclusive of any other parts of the ROB as directed by engineer in-charge

Consultancy Services for Rail structure interaction study as per para IRS Bridge for longitudinal forces and rotation/ deflections of structure as per UIC 774-3R for continuing long welded Rails (LWR) Railway 5 Bridges WDFC under Western Railway between Tihi-Sardapur section for Bridges of various spans, types of super-structure, foundations in Madhya Pradesh as per the available GAD's, other drawings given by the Engineer, specifications, special conditions, various codes, etc. using contractors own software,manpower. equipment's. etc.

"Preparation of LWR/CWR and Weld Plans: For Continuously Welded Rail (CWR) track for as much length as possible, for which the Contractor shall prepare the CWR plans for the approval of the Employer in accordance with the design principles/provisions contained in IR LWR (Long Welded Rail) Manual based on 6 approved Track Structure. The consultant shall submit advance copy of the Weld Plans on white paper for approval of Employer. After the approval of Employer, the Consultant shall submit drawings in 3 (three) hard coloured copies on Polyester based tracing paper (100 to 150 Microns) and two soft copies on CD. The scope includes required corrections and modifications as suggested by approving authorities of Railways till its final approval. Required follow up with various approving authorities including required explanations on various provisions/facilities in the ESP shall be arranged by consultant. Note: i) The colour scheme to be followed in the drawing shall be as per standard practice of IR. ii) Payment will be done as per Stages given below - Submission of Weld Plans and approval by Dyce (Planning) / CN / BNC and CE/CN 60% - Submission of Weld Plans and approval by Divisional HQ: 15% - Submission of Weld Plans and approval by Zonal HQ: 15% Submission of Weld Plans in hard & soft copies : 10%

Slope stability calculation and design for Railways Embankment / Cutting more than 6 meters 1 height based on soil materials & parameters as per RDSO's latest standards and specifications, duly conducting relevant lab test, e.g. cohesion and angle of internal friction etc. and submitting report for approval duly showing the cross-section dimensions for embankment / cutting for each cross section. Embankment