West Central Railway Tender

"Fabrication assembly insitu G-3/L type glued insulated joints for broad gauge 60kg/52kg with all contractor's material, to and from transportation of material, octroi etc. complete as per RDSO/Drg. No. T671/T- 2572 and RDSO/Drg. No. T-5361/T-5843 and confirming to the specification as per instructionscontained in manual for glued insulated rail joints. This item is inclusive of all fittings and accessories such as :- a. Long fish plates b.H.T.S bolts and nuts c.Punch washers d.Insulated bushese.Insulated channels f.6/10 mm thick end post 1 g.Glue h.Hardner i.Glass cloth carrier and all the materials and fittings for cleaning and assembling excluding rails j.Any other fitting and accessories required to fabricate "In situ Glued Joint"" in all respect as per RDSO drawings and specifications contained in manual for in situ glued joints. Note:-In - Situ glued joints shall be checked for insulation as per Railways satisfaction. The glued joint should behave satisfactorily minimum up to 6 months from the date of laying. In case of any defects detected in this period, the glued joints shall have to be replaced. Security money shall only be released after six months & after certification from site in charge regarding satisfactory behavior of all glued joints minimum up to six months from the date of laying."

Fabrication assembly in situ G3 (L) type glued insulated rail joints for broad gauge 60 kg with all 2 contractor's material to and from transportation of material octroi etc. complete in all respect RDSO/T-2572 with 6 mm thick end post include rail cutting, cleaning of ends, drilling of rail holes of chamfering during block i.e as per manual glued insulated rail jointsRev.1998.