Public Works Department Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Public Works Department - PWD Tender
Opening Date17 Aug 2018
Closing Date5 Sep 2018
Tender Amount₹ 86,46,000
Costs
EMD
₹ 86,460Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
PWD/TENDER NO -57864-1Tender No
PWD/TENDER NO -57864-1Tender Authority
Public Works Department ViewPurchaser Address
-
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
All kind of soil
677.65
78675
116.1
Earth work in excavation/ by
mechanical means (Hydraulic
Excavator)/ manual means over
areas (exceeding 30 cm in depth,
1.5m in width as well as 10 sqm on
plan) including dressing of sides
and ramming of bottom disposal of
excavated earth, lead up to 50 m
and lift up to 1.5 m, disposed earth
to be levelled and neatly dressed.
-
-
-
Ordinary rock
2.18
398
182.7
Excavating trenches of required
width for p1pes, cables, etc
including excavation for sockets,
and dressing of sides, ramming of
bottoms, depth up to 1.5 m
including getting out the excavated
soil, and then returning the soil as
required, in layers not exceeding 20
cm in depth including consolidating
each deposited layer by ramming.
watering, etc. and disposing of
surplus excavated soil as directed,
within a lead of 50 m : (No extra lift
is payable if work is done by
mechanical means)
-
-
-
Pipes, cables etc. exceeding 80mm dia. but not exceeding 300mm dia
50
7020
140.4
Filling available excavated earth
(excluding hard rock/Ordinary
rock) in trenches, plinth, sides of
foundations etc. in layers not
exceeding 20cm in depth,
consolidating each deposited layer
by ramming and watering, lead up
to 50 m and lift up to 1.5 m.
515.63
33412
64.8
Extra for every additional lift of 1.5
m or part thereof in excavation. (No
extra lift is payable if work is done
by mechanical means)
-
-
-
All kinds of soil
3.28
88
27
Extra for every additional lift of 1.5
m or part thereof in excavation. (No
extra lift is payable if work is done
by mechanical means)
-
-
-
Ordinary rock
2.18
103
47.7
Supplying and filling in plinth withcru-sher stone dust I coarse sand under floors including, watering, ramming consolidating in layers not exceeding 20cm in depth and dressing complete.
67.9
41065
604.8
Supplying and filling in plinth with
hard muram/hard copra having
MDD not Less than 2.0 t/m ³under
floors including watering ramming
compacting ( mimimum comaction
95% of MDD ) in layers not
exceeding 20 cm in thickness and
dressing complete ( Note: -
Miximum thickenss of this layer to
be provided shall be 30 cm )
135.8
36666
270
Supplying and filling in plinth
withsoil ( Other than B.C. Soil
having MDD not Less than 1.85 t/m
³under floors including watering
ramming compacting ( mimimum
comaction 95% of MDD ) in layers
not exceeding 15 cm in thickness
and dressing complete
135.8
30555
225
Earthwork in rough excavation by
any means and banking/filling
eaxcavated earth in layers not
exceeding 20cm in depth, breaking
clods, watering, rolling each layer
with 1/2 tonne roller or wooden or
steel rammers, and rolling every 3rd
and top-most layer with power roller
of minimum 8 tonnes and dressing
up, in embankments for roads, flood
banks, margingal banks, and guide
banks etc., lead upto 50 m and lift
upto 1.5 m:
-
-
-
All Kinds of soil
133
15561
117
Providing and laying in position
cement concrete of specified grade
excluding the cost of centering and
shuttering - All work up to plinth
level :
-
-
-
4.1.2 With 40mm nominal size graded stone aggregate.
-
-
-
4.1.2.2 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate (M I0)
107.88
369726
3427.2
Extra for providing and mixing waterproofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer.
-
-
-
Providing and laying in positionspecified grade of reinforced cement concrete (with 20mm
nominal size graded stone aggregate excluding the cost of centering, shuttering, finishing and reinforc-ement - All work up to plinth level :
-
-
-
M 20 -Grade Concrete
170.89
783000
4581.9
Reinforced cement concrete work(with 20mm nominal size graded stone aggregate in walls (any
thickness), including attached pilasters, uttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and up to floor two level excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
M 20 -Grade Concrete
28.41
133009
4681.8
Reinforced cement concrete work(with 20mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level and up to floor two level excluding the cost of centering, shuttering, finishing and
-
-
-
M 20 -Grade Concrete
197.08
937233
4755.6
RCC With Shuttering
Providing and laying/ erecting design mix in situ or precast or combination of in situ and precast concrete of specified grade as per approved design for R.C.C. work, prepared by only weight batching and machine mixing at site/yard/RMC plant including transportation to any lead by any means such as chute, conveyor belt, truck, RMC transit mixer etc placed/erected by any mechenical means such as bucket, hoist, pump, crane, hydra etc.including cast of all materials such as admixture/plastisizer to achive designed retarded/ accelerated setting time and suitable workability, centering, shuttering, strutting, compacting,
-
-
-
vibrating, vacume dewatering, curing by any means such as water, steam, curing compound rtc. complete but excluding cost of reinforcement, as per direction of Engineer-in-charge. All works in complince to relevant Is codes and CPWD specification only
-
-
-
(Note : Design Mix Shall have minimum cement contant shall be 325 kg/cum for M-20, 330kg/cum for M-25, 340kg/cum for M-30, 350kg/cum for M-35, 360kg/cum for M-40, and no extra payment for use of extra quantity of cement in design mix shall be made
-
-
-
All work up to plinth level ( footing raft, padstal, RCC drain,RCC retaining wall, RCC abutment, RCC piers, Plinth beam, grade slab curtain wall poles, RCC berier etc
-
-
-
M-20
-
-
5000
Above plinth up to floor level walls (any thickness) pillars piers, posts, and struts etc
-
-
-
M-20
-
-
5270
Suspended floors, roofs having slope of any degree,, landings, balconies and access platform. Floor beam, girders, bressumers and cantilevers, Shelves chajjas, Lintels, bends staircase and spiral staircases, coffer slab
-
-
-
M-20
-
-
4755.6
5.9 Centering and shuttering
strutting, propping etc. and removal
of form for:
-
-
-
5.9.1 Foundations, footings, bases of colu-mns, etc. for concrete up to plinth lavel
199.59
31255
156.6
Walls (any thickness) including attached pilasters butteresses, plinth beams and string courses etc.up to plinth level.
877.48
210858
240.3
5.9.3 Suspended Floors , roofs, Landings, balconies and access
662.86
157495
237.6
Lintels, beams, girders, bressumers
and cantilevers
773.55
158036
204.3
Columns, Pillars, Piers,
Abutments, Posts and Struts.
451.36
144615
320.4
Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards.
30
12987
432.9
Weather shade, Chajjas, corbels
etc., including Edges.
85.2
34582
405.9
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding up to floor two level including cost of binding wire, all wastage and lappage /overlap (overlaps shall be provided as per requirement of IS 13920 for ductile detailing, IS 456 Design & SP 34 Reinforcement detailing) etc complete ( Note : Spacer bar (chairs) shall be paid seperately as shown in the drawing and as per direction o
-
-
-
ThermoMechanically in charge Treated bars.(TMT) Fe 500 D conforming to IS 1786
43576.3
2614578
60
Providing for plaster drip course/groove in plastered surface or moulding to R.C.C. projections.
247.2
4115
16.65
Brick work with well burnt
chimney bricks in bulls patent
trench kiln, crushing strength not
less than 25kg
/cm2 and water bsorption not more
than 20% in foundation and plinth
i/c curing etc complete.
-
-
-
Cement Mortar 1:6 (1 cement: 6
sand).
1.64
7470
4554.9
Brick work with fly ash lime
bricks (FALG Bricks) conforming
to IS:12894-2002, in super
structure above plinth level up to
floor II level in :
-
-
-
6.7.3 having 50 kg I cmz average compressive
strength
-
-
-
Cement mortar 1:6 (1 cement : 6
sand)
134.71
537492
3990
Half brick masonry with fly ash
lime Gypsum bricks (FALG bricks)
conforming to IS 12894, m
super structure above plinth and
upto floor two level.
-
-
-
6.15.3 having 50 kglcm2 average compressive strength
-
-
-
Cement mortar 1 : 4 (1cement : 4
sand)
67.92
31175
459
Providing wood work in frames ofdoors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast
lugs or with dash fasteners of
required dia and length (hold fast
lugs or dash fastener shall be
paid for separately).
-
-
-
9.1.4 Factory made Kiln seasoned chemically treated, finger jointed at spacing not closer than 50 cm, 2nd
class hard wood
-
-
-
Frame of size 100mm x 60mm single or double rebate
309.45
108338
350.1
Providing and fixing panelled orpanelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all
complete as per direction of Engineer-in- charge
-
-
-
Factory made Kiln seasoned chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood
-
-
-
35 mm thick shutters
152.67
149631
980.1
Providing and fixing panelling or
panelling and glazing in panelled
or panelled and glazed shutters for
doors, windows and clerestory
windows (Area of opening for panel
inserts excluding portion inside
grooves or rebates to be measured).
Panelling for panelled or panelled
and glazed shutters 25 mm to 40
mm thick :
-
-
-
9.6.9 15 mm thick factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer
than 50 cm , 2nd class hard wood.
58.44
51070
873.9
Providing and fixing M.S. grills of
required pattern in frames of
windows etc. with M.S. flats, square
or round bars etc. including priming
coat with approved steel primer all
complete.
-
-
-
Fixed to openings /wooden frames
with rawl plugs
screws etc.
994.4
89496
90
Providing 40x5 mm flat iron hold
fast 40 em long including fixing to
frame with 10 mm diameter bolts,
nuts and wooden plugs and
embeddings in cement concrete
block 30xl0x.l5cm 1:3:6 mix (I
cement: 3 sand: 6 graded stone
aggregate 20mm nominal size)
90
7695
85.5
Providing and fixing aluminium
sliding door bolts lSI marked
anodised (anodic coating not less
than grade AC 10 as per IS : 1868)
transparent or dyed to required
colour or shade with nuts and
screws etc. complete :
-
-
-
300X16mm
44
9543
216.9
250x16mm
16
2808
175.5
Providing and fixing aluminium
tower bolts lSI marked anodised
(anodic coating not less than grade
AC 10 as per IS : 1868 ) transparent
or dyed to required colour or shade
with necessary screws etc.
complete
-
-
-
250X10 MM
35
3213
91.8
lOOx lO mm
82
4059
49.5
Providing and fixing aluminium
handles lSI marked anodised
(anodic coating not less than grade
AC 10 as per IS : 1868) transparent
or dyed to required colour or shade
with necessary screws etc.
complete:
-
-
-
125mm
60
4050
67.5
75mm
64
2649
41.4
Providing and fixing aluminium
hanging floor door stopper lSI
marked anodised (anodic coating
not less than grade AC 10 as per IS
: 1868) transpa-rent or dyed to
required colour and shade with
necessary screws etc. complete.
-
-
-
Twin rubber stopper
29
2244
77.4
Providing and fixing factory made
100% solid PVC flush door shutter
made from co-extruded three layer
rigid PVC foam sheet (Single
extruded) with density not less than
600 kg/cum outer layer 1 mm thick
to be rigid UPVC with density not
less than 1400 kg/cum
manufactured by an ISO : 9001-
2000 certified company
-
-
-
24 mm thick plain solid PVC flush
door shutter
13.44
50621
3766.5
Providing and fixing factory made
100% solid wood plastic composite
(wpc) door frames made from wood
plastic composite (single extruded
process) material with density 0.78
kg/cum and manufactured by a ISO
9001-2000 certified company. water
absorption not more than 0.01%
cum..
-
-
-
WPC door frame-single rebate (90
mm x 45 mm )
40.8
29229
716.4
Structural steel work riveted,
bolted or welded in built up
sections, trusses and framed work,
including cutting,hoisting, fixing in
position and applying a priming coat
of approved steel primer all
complete.
-
-
-
Providing and fixing circular/
Hexagonal cast iron or M.S. sheet
box for ceiling fan clamp of internal
dia 140mm, 73mm height, top lid of
1.5mm thick M.S. sheet with its top
surface hacked for proper bonding,
top lid shall be screwed into the
cast iron/ M.S. sheet box by means
of 3.3mm dia.
-
-
-
Steel work welded in built up
sections/ framed work including
cutting, hoisting, fixing in position
and applying a priming coat of
approved steel primer using
structural steel etc. as required.
-
-
-
In gratings, frames, guard bar,
ladder, railings,
brackets, gates and similar works.
160
12254
76.59
Providing and fixing hand rail of
approved size by welding etc.to
steel ladder railing, balcony railing,
staircase railing and similar works,
including applying a priming coat of
approved steel primer.
-
-
-
G.I. pipes.
100
11570
115.7
Providing and fixing glass panes/
steel sheet/ Fibre sheet with putty
and glazing clips in steel doors,
windows, clerestory windows all
complete.
-
-
-
With 4.0 mm thick glass panes.
29.83
21275
713.21
Add extra for providing and fixing
froasted glass instead of float glass
-
-
-
With 4.0 mm thick glass panes.
-
-
-
Providing and fixing glass strips in
joints of terrazo/ cement concrete
-
-
-
40m wide and 4 mm thick.
580
17748
30.6
Providing and fixing 18mm thick
gang saw cut mirror polished
(premoulded and prepolished)
machine cut for kitchen platforms,
vanity counters, window sills , facias
and similar locations of required
size of approved shade, colour and
texture laid over 20mm thick base
cement mortar 1:4 (1 cement : 4
sand) with joints treated with white
cement, mixed with matching
pigment, epoxy touch ups,
including rubbing, curing moulding
and polishing to edge to give high
gloss finish wherever required etc.
complete at all levels. samples
approved by Engineer-in-charge.
-
-
-
Cuddpah stone
1.8
2071
1151.1
Kota stone slab flooring over 20 mm
(average) thick base laid over and
jointed with grey cement slurry
mixed with pigment to match the
shade of the slab including rubbing
and polishing complete with base of
cement mortar 1 : 4 (1cement : 4
sand)
-
-
-
25 mm thick.
671.08
462038
688.5
Kota stone slabs 20 mm thick in
risers of steps, skirting, dado and
pillars laid on 12 mm (average) thick
cement mortar 1:3 (1 cement 3
sand) and jointed with grey cement
slurry mixed with pigment to match
the shade of the slabs, including
rubbing and polishing complete.
67.11
44876
668.7
Extra for pre finished nosing in
treads of steps of Kota stone/ sand
stone slab.
16
561
35.1
Providing and laying rectified
Glazed Ceramic wall tiles 300x450
mm or more (having thickness 6 to
7 mm) of 1st quality conforming to
IS : 15622 of approved make in all
colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid
on 12 mm thick Cement Mortar 1:3
(1 Cement: 3 sand) including
pointing the joints with white
cement and matching pigments
63.9
41177
644.4
Providing and laying rectified
Glazed Ceramic floor tiles 300x300
mm or more (having thickness 9 to
10mm) of 1st quality conforming to
IS : 15622 of approved make in all
colours, shades, except White,
Ivory, Grey, Fume Red Brown, laid
on 20 mm thick Cement Mortar 1:4
(1 Cement : 4 sand) including
pointing the joints with white
cement and matching pigments
etc., complete.
-
-
-
Providing and laying Antiskid floor
tiles of any sizes, 12 mm thickness
with water absorption's less than
0.08% and conforming to IS: 15622
of approved make in all colours and
shades, laid on 20mm thick cement
mortar 1:4 (I cement :4 sand)
including grouting the joints with
white cement with matching
pigments etc., complete.
14
11088
792
Providing gola 75x75 mm in cement
concrete 1:2:4 (1 cement: 2 sand :
4 stone aggregate 10mm and down
grade) including finishing with
cement mortar 1:3 (1 cement: 3
sand) as per standard design:
-
-
-
In 75x75mm deep chase
305.6
27228
89.1
Making khurras 45x45 em with
average minimum thickness of 5 cm
cement concrete 1:2:4 (1 cement : 2
sand :4 graded stone aggregate of
20 mm nominal size) over P.V.C.
sheet 1mx1mx400micron, finished
with 12mm cement plaster 1:3 (1
cement: 3 sand) and a coat of neat
cement rounding the edge and
making and finishing the outlet
complete.
-
-
-
12mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 sand)
1324.89
131164
99
15 mm cement plaster on the rough
side of single or half brick wall of
mix
-
-
-
1:6 (1 cement: 6 sand)
470.43
54193
115.2
12 mm cement plaster finished with
a floating coat of neat cement ofmix:
-
-
-
1:4 (I cement: 4 sand)
81.26
11043
135.9
6 mm cement plaster of mix :
-
-
-
1:3 (1 cement: 3 sand)
187
16156
86.4
Washed stone grit plaster on
exterior walls of height upto 10 M.
above ground level in two layers,
under layer 12mm cement plaster
1:4 (1 cement : 4 sand ) furrowing
the under layer with scratching tool,
applying cement slurry on the
under layer @ 2 Kg of cement per
square metre, top layer 15mm
cement plaster 1:1/2:2 (1 cement :
1/2 sand : 2 stone chipping 1Omm
nominal size) in panels with groove
all around as per approved pattern
including scrubbing and washing,
the top layer with brushes and
water to expose the stone chippings
,complete as per specification and
direction of Engineer-in- charge
141.96
48294
340.2
Providing and fixing chicken mesh
as per lSI specification and in the
required width with 50mm long
Bombay nails on vertical and
horizontal junctions of RCC and
brick wall including scaffolding and
all lead and lift etc. complete before
plastering upt 10 meter height.
50
2790
55.8
Providing and fixing writing board
green writing with chalk (reguler
modified polyster coated steel
surface). of sizes.
-
-
-
size 1200mmx1800mm
1
6692
6692.4
Applying one coat of water
thinnable cement primer of
approved brand and manufacture
on wall surface :
-
-
-
Water thinnable cement primer.
1311.96
28338
21.6
Distempering with 1st quality acrylic
distemper (ready mixed) of
approved manufacturer, of required
shade and colour complete, as per
manufacturer's specification.
-
-
-
Two or more coats on new work.
1312.01
40147
30.6
Indian tribal art pithora or warli
painting on any wall (interior or
exterior) by using textured exterior
paint/acrylic smooth exterior paint of
approved brand and manufacture
including preparation of surface &
cost of all material, labour and
scaffolding etc complete
3.84
9738
2536.11
Finishing walls with Premium Acrylic
Smooth exterior paint with Silicone
additives of required shade
-
-
-
New work (Two or more coats
applied @ 1.43 ltr/ 10 sqm. over
and including priming coat of
exterior primer applied @ 2.20 kg/
10 sqm).
652.25
49310
75.6
Painting with synthetic enamel
paint of approved brand and
manufacture to give an even shade
-
-
-
:Two or more coats on new work
561.9
26802
47.7
Boring/drilling bore well of required
dia perfectly vertical to receive
casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part
I), including collecting samples from
different strata, preparing and
submitting strata chart/bore log,
including hire and running charges
of all equipments, tools, plants and
machineries required for the job, all
complete as per direction of
Engineer –in-charge, upto 90 metre
depth below ground level.
-
-
-
All types of soil
-
-
-
200 mm dia.
50
20295
405.9
Rocky strata including Boulders.
-
-
-
200 mmdia.
40
24840
621
Boring/drilling bore well of required
dia perfectly vertical to receive
casing/ strainer pipe, by suitable
method prescribed in IS: 2800 (part
I), including collecting samples from
different strata, preparing and
submitting strata chart/bore log,
including hire and running charges
of all equipments, tools, plants and
machineries required for the job, all
complete as per direction of
Engineer –in-charge, upto 90 metre
depth below ground level.
-
-
-
Rocky strata including Boulders.
-
-
-
200 mm dia.
10
5904
590.4
Supplying, assembling, lowering
and fixing in vertical position in bore
well, unplasticized PVC medium
well casing (CM) pipe of required
dia, conforming to IS: 12818,
including required hire and labour
charges, fittings and accessories
etc. all complete, for all depths, as
per direction of Engineer-in-charge.
-
-
-
200 mm nominal dia(minimum wall
thickness 10mm)
60
30186
503.1
Providing and fixing suitable size
threaded mild steel cap or spot
welded plate to the top of bore well
housing/ casing pipe, removable as
per requirement, all complete for
borewell of:
-
-
-
200 mm dia
1
439
439.2
Providing and fixing M.S. clamp of
required dia made of 100 x10 mm
flat to the top of casing/ housing
pipe of tubewell as per IS: 2800
(part I), including necessary bolts
and nuts of required size complete.
-
-
-
200 mm clamp.
1
1152
1152.9
Providing and placing in position
hand pump of India mark II
ofapproved quality for 40 mrn
diameter G.I. pipe complete with all
accessories.
1
756
756.9
Providing and fixing water closet
squatting pan (Indian type W.C.
pan) with 100mm sand cast Iron P
or Strap, uPVC P or Strap, 10 litre
low level white P.V.C. flushing
cistern. including flush pipe, with
manually controlled device (handle
lever) conforming to IS : 7231, with
all fittings and fixtures complete
including cutting and making good
the walls and floors wherever
required :
-
-
-
White Vitreous china Orissa pattern
W.C. pan of size
580x440mm with integral type foot
rests.
3
8086
2695.5
Providing and fixing white vitreous
china pedestal type water closet
(European type W.C. pan) with seat
and lid, 10 litre low level white
P.V.C. flushing cistern, including
flush pipe, with manually controlled
device (handle lever), conforming to
IS : 7231, with all fittings and
fixtures complete including cutting
and making good the walls and
floors wherever required :
-
-
-
W.C. pan with ISI marked white
solid plastic seat and lid
6
16394
2732.4
Providing and fixing white vitreous
china flat back or wall corner type
lipped front urinal basin of
430x260x350mm and
340x410x265mm sizes respectively
with automatic flushing cistern with
standard flush pipe and C.P. brass
spreaders with brass unions and G.I
clamps complete, including painting
of fittings and brackets, cutting and
making good the walls and floors
wherever required :
-
-
-
One urinal basin with 5 litre white
P.V.C. automatic flushing cistern.
1
2478
2478.6
Range of three urinal basins with
lOlitre white P.V.C.
automatic flushing cistern.
2
11361
5680.8
Providing and fixing wash basin with
C.I. brackets, 15 mm C.P. brass
pillar taps,32 mm C.P. brass waste
of standard pattern, including
painting of fittings and brackets,
cutting and making good the walls
wherever require :
-
-
-
White Vitreous China Flat back
wash basin size 450x300 mm with
single 15 mm C.P. brass pillar tap.
8
15746
1968.3
Providing and fixing soil, waste and
vent pipes :
-
-
-
100 mm dia. Pipe minimum wall
thickness 5mm
-
-
-
Centrifugally cast (spun) rron
socket and spigot (SandS) pipe as
per IS: 3989.
100
85950
859.5
Providing and fixing M.S. holder-bat
clamps of approved design to Sand
Cast iron/cast iron (spun) pipe
embedded in and including cement
concrete blocks 10x10x10cm of
Cement Concrete 1:2:4 mix (1
cement : 2 sand : 4 graded stone
aggregate 20mm nominal size)
including cost of cutting holes and
making good the walls etc. :
-
-
-
For 100 mm dia. Pipe
20
1188
59.4
Providing and fixing bend of
required degree with access door,
insertion rubber washer 3 mm thick,
bolts and nuts complete.
-
-
-
100 mm dia minimum wall thickness
6.5mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
2937
367.2
Providing and fixing plain bend of
required degree.
-
-
-
100 mm dia minimum wall thickness
6.5mm
-
-
-
Sand cast iron SandS as per IS :
3989
18
5605
311.4
Providing and ftxing heel rest
sanitary bend
-
-
-
100 mm dia minimum wall thickness
6.5mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
2786
348.3
Providing and fiXing single equal
plain junction of required degree :
-
-
-
100x100xl00 mm minimum wall
thickness 6.5mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
4370
546.3
Providing and fixing door piece,
insertion rubber washer 3mm thick,
bolts and nuts complete :
-
-
-
100 mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
3938
492.3
Providing and fiXing terminal guard:
-
-
-
100 mm
-
-
-
Sand cast iron SandS as per IS -
3989
8
3456
432
Providing and fiXing collar:
-
-
-
100mm
-
-
-
Sand cast iron SandS as per IS -
3989
5
1426
285.3
Providing lead caulked joints to
sand cast iron/ centrifugally cast
(spun) iron pipes and fittings of
diameter:
-
-
-
100mm
45
9477
210.6
Providing and fixing trap of self
cleansing design with screwed
down or hinged grating with or
without vent arm complete,
including cost of cutting and making
good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet
-
-
-
Sand cast iron SandS as per IS:3989
8
5940
742.5
Providing and fixing P.V.C. waste
pipe for sink or wash basin
including P.V.C. waste fittings
complete.
-
-
-
Flexible pipe
-
-
-
32 mm
15
1174
78.3
Providing and fixing mirror of
superior glass (of approved quality)
and of required shape and size
with plastic moulded frame of
approved make and shape with 6
mm thick hard board backing :
-
-
-
Rectangularshape453x357mm
8
4622
577.8
Providing and fixing toilet paper
holder :
-
-
-
C.P. brass
6
1836
306
Providing and fixing CP brass
towel rail of approved quality and
make
-
-
-
450x20mm
4
3009
752.4
Providing and fixing CP brass soap
dish of approved quality and make
4
1519
379.8
Painting sand cast iron/
centrifugally cast (spun) iron soil,
waste vent pipes and fittings with
two coats of synthetic enamel paint
of any colour such as chocolate
grey, or buff etc. over a coat of
primer (of approved quality) for new
work
-
-
-
100 mm diameter pipe
60
1566
26.1
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC)
pipes, having thermal stability for
hot and cold water supply including
all CPVC plain and brass threaded
fittings i/c fixing the pipe with
clamps at 1.00 m spacing. This
includes jointing of pipes and
fittings with one step CPVC solvent
cement and the cost of cutting
chases and making good the same
including testing of joints complete
as per direction of Engineer in
Charge.
Concealed work including cutting
chases and making good the
walls etc.
-
-
-
15 mm nominal outer dia .Pipes.
25
4657
186.3
20 mm nominal outer dia .Pipes.
150
31590
210.6
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC)
pipes, having thermal stability for
hot and cold water supply including
all CPVC plain and brass threaded
fittings. This included jointing of
pipes and fittings with one step
CPVC solvent cement, trenching,
refilling and testing of joints
complete as per direction of
Engineer in Charge.
External work
-
-
-
25 mm nominal outer dia .Pipes.
50
8325
166.5
Providing and fixing G.I. pipes
complete with G.I. fittings including
trenching and refilling etc.External
work :
-
-
-
32 mm dia nominal bore
10
2790
279
40 mm dia nominal bore
10
3618
361.8
50 mm nominal outer dia .Pipes.
10
4428
442.8
80 mm nominal outer dia .Pipes.
10
5598
559.8
Providing and fixing gun metal gate
valve with brass Jever handle
of approved quality.
-
-
-
32 mm nominal bore.
4
1508
377.1
40 mm nominal bore.
4
1767
441.9
Providing and fixing CPVC gate
valve with knob of approved
quality.
-
-
-
25 mm nominal bore
4
1540
385.2
Providing and fixing gun metal nonreturn
valve of approved
quality (screwed end):
-
-
-
25 mm nominal bore..
-
-
-
Verticle
2
853
426.6
Providing and placing on terrace (at
all floor levels) polyethylene water
storage tank ISI : 12701 marked
with cover and suitable locking
arrangement and making necessary
holes for inlet, outlet and overflow
pipes but without fittings and the
base support for tank
2000
12600
6.3
Providing and fixing C.P. brass
angle valve for basin mixer and
geyser points of approved quality
conforming to IS:8931
8
3715
464.4
Providing and fixing C.P. brass
shower rose with 15 or 20 mm inlet:
-
-
-
150 mm diameter
2
279
139.5
Providing and fixing PTMT bib
cock of approved quality and
colour.
-
-
-
15mm nominal bore, 90mm long.
Weighing not less
than 93 gms.
3
639
213.3
Providing and fixing PTMT stop
cock of approved quality and
colour.
-
-
-
Concealed stop cock, 15mm
nominal bore, 108mm long.
Weighing not less than 108 gms.
4
871
217.8
Providing and fixing PTMT pillar
cock of approved quality and
colour.
-
-
-
15mm nominal bore, 125mm
long foam flow. Weighing not
less than 120 gms.
4
1195
298.8
Providing and fixing PTMT
grating of approved quality and
colour.
-
-
-
Circular type.
-
-
-
100 mm nominal dia.
8
396
49.5
125 mm nominal dia with 25 mm
waste hole.
8
432
54
Providing and fixing PTMT Ball cock
of approved quality, colour
and make complete with Epoxy
coated aluminium rod with L.P./
H.P.H.D. plastic ball.
-
-
-
25 mm nominal bore, 152mm long.
Weighing not less
than 440 gms.
-
-
-
verticle
2
1107
553.5
Providing and fixing Unplasticised
P.V.C. connection pipe with PTMT
Nuts collar and bush of approved
quality and colour.
-
-
-
15 mm nominal bore with 45 em
length.
-
-
-
Cutting holes upto 15x15 em in
R.C.C. floors and roofs for passing
drain pipe etc. and repairing the
hole after insertion of drain pipe
etc. with cement concrete 1:2:4
(1cement: 2 sand: 4 graded stone
aggregate 20 mm nominal size)
including finishing complete so as
to make it leak proof.
10
1161
116.1
Providing and fixing CP jet
assembly to including connection
etc complete.
6
2025
337.5
Providing and laying below ground
unplasticised PVC pipe to with
stand working pressure of 4 kg/cm2
soild waste pipes confirming to
IS:13592 and IS:4985 including
jointing with seal ring confirming to
IS :5282 leaving 10mm gap for
thermal expansion all necessary
fittings etc. complete. Excavation to
be paid seperataly.
-
-
-
160 mm diameter OD
50
21465
429.3
Providing and laying cement
concrete 1:3:6 (1 cement : 3 sand :
6 graded stone aggregate 20 mm
nominal size) all-round PVC. pipes
including bed concrete as per
standard design:
-
-
-
160 mm diameter PVC. Pipe
50
31680
633.6
Providing and fixing square-mouth
S.W. gully trap class SP1 complete
with C.I. grating brick masonry
chamber with water tight C.I. cover
with frame of 300 x300 mm size
(inside) the weight of cover to be
not less than 4.50 kg and frame to
be not less than 2.70 kg as per
standard design :
-
-
-
150 x 100 mm size P type.
-
-
-
With well burnt bricks
4
6490
1622.7
Providing and laying non-pressure
NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture
of cement mortar in the proportion
of 1:2 (1 cement : 2 sand) including
testing of joints etc. complete:
-
-
-
150 mm dia. R.C.C. pipe
10
2565
256.5
Constructing brick masonry
manhole in cement mortar 1:4 ( 1
cement : 4 sand ) R.C.C. top slab
with Cement Concrete 1:2:4 mix (1
cement : 2 sand : 4 graded stone
aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1
cement : 4 sand : 8 graded stone
aggregate 40mm nominal size)
inside plastering 12mm thick with
cement mortar 1:3 (1 cement : 3
sand) finished with floating coat of
neat cement and making channels
in cement concrete 1:2:4 (1 cement
: 2 sand : 4 graded stone aggregate
20mm nominal size) finished with a
floating coat of neat cement
complete as per standard design
-
-
-
Inside size 90x80 cm and 45 cm
deep including C.I. cover with frame
(light duty) 455x610 mm internal
dimensions total weight of cover
and frame to be not less than 38 kg
(weight of cover 23 kg and weight of
frame 15 kg) :
-
-
-
With Sewer bricks conforming to IS
: 4885
-
-
-
Extra for depth for manholes
-
-
-
Size 90x80 cm
-
-
-
With Sewer bricks conforming to IS
: 4885
0.5
2451
4903.2
Constructing brick masonry road
gully chamber 50x45x60 cm with
bricks in cement mortar 1:4 (1
cement : 4 sand) including 500x450
mm precast R.C.C. horizontal
grating with frame complete as per
standard design :
-
-
-
With well burnt bricks
4
14187
3546.9
Constructing soak pit
1.20x1.20x1.20m filled with
brickbats including S.W. drain pipe
100 mm diameter and 1.20m long
complete as per standard design.
1
2854
2854.8
SUB TOTAL SOR ITEMS CIVIL WORKS
-
8567997
-
Description Of Item
-
-
-
Point wiring (excluding metallic switch box & sheet but including switches,sockes,lamp,holders,ceiling roses etc) with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green
-
-
-
Light Point/Fan Points.
-
-
-
a) Short point
12
4260
355
b) Medium point
32
19328
604
c) Long point
65
63355
974.7
3 Pin 6 Amp socket outlet on Separate Board
-
-
-
b) Medium point
6
4212
702
c) Long point
8
8582
1072.8
Call Bell / Buzzer Points
-
-
-
c) Long point
1
884
884.7
Point wiring (excluding metallic switch box & sheet but including switches, sockets) for 3 pin 6 Amp. Socket outlet point with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) ISI marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit with required materials as per specification on same board .
24
6156
-
Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit (HMS) of ISI marked suitable size etc. as required as per specification
-
-
-
a) 2x2.5 Sq.mm.
275
28957
105.3
b) 4x2.5 Sq.mm.
150
23760
158.4
c) 6x2.5 Sq.mm.
60
12150
202.5
d) 8x2.5 Sq.mm.
20
4986
249.3
Point wiring (excluding metallic switch box & sheet ) for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Concealed rigid P.V.C Conduit (HMS) ISI Marked of suitable size etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 6/16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour
-
-
-
On Separate Board
-
-
-
B. Medium Point
2
2403
1201.5
C. Long Point
4
6948
1737
D. Extra Long –I
1
2378
2378.7
F. Extra Long –III
1
3773
3773.7
Same board switch socket 6/16 Amp
1
421
421.2
Supplying and fixing PVC conduit ISI marked along with the accessories in concealed system etc. as required
-
-
-
PVC . Conduit 25 mm (HMS)
220
14256
64.8
PVC . Conduit 32 mm (HMS)
60
5832
97.2
Supplying and fixing of approved make modular type metal box with modular frame/ base plate and cover plate including fixing in concealed / surface excluding switch,socket etc. as required for:-
-
-
-
1 Or 2 Module
2
280
140.4
3 Module
10
1872
187.2
6 Module
18
5281
293.4
8 / 9 Module
5
1800
360
12 Module
18
7889
438.3
Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid PVC Casing-N-Capping / conduit in surface or concealed as per specification.
-
-
-
1 X 4.00 sq mm
-
-
-
(c) 3 X 4.00 sq mm
140
13986
99.9
1 X 6.00 sq mm
-
-
-
(c) 3 X 6.00 sq mm
20
2934
146.7
(e) 5 X 6.00 sq mm
20
4842
242.1
Wiring for sub-mains with PVC insulated cable FR with copper multi strand conductor ISI marked in recessed / concealed rigid PVC conduit (HMS) ISI marked of suitable size(Conduit included) including 2mm thick accessories, connection etc ,as required as per specification
-
-
-
4 WIRE SUB-MAIN
-
-
-
6.0 sq mm cable in 25 mm conduit
20
4752
237.6
10.0 sq mm cable in 32 mm conduit
20
7758
387.9
Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898 :2002 but without
-
-
-
SINGLE POLE (SP)
-
-
-
6 Amp to 32 Amp Rating
24
4428
184.5
FOR TRIPLE POLE (TP)
-
-
-
For 40 Amps. Rating only.
2
2669
1334.7
Supplying of ISI Marked and approved make of Moulded
Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole,
50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS – 8828
-
-
-
MCCB with Breaking Capacity 10 KA at 415 V
-
-
-
Current Rating -25 to100 Amps
3
4571
1523.7
Supplying of approved make, powder coated Metal Double Door Vertical TPN MCB DB IP 43 protection with provision for MCCB up to 160A TP/ FP 36kA as incomer and space for SP/TP MCBs as outgoing (without MCCB / MCBs) inclusive of bus bar & connections etc
-
-
-
4 way without MCCB
3
23006
7668.9
Fixing of MCB /MCCB/ Isolator in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (Labour only )
-
-
-
MCB / Isolator SP/DP
24
237
9.9
MCB /MCCB Isolator TP /TPN/FP
3
59
19.8
Labour charges for fixing sheet steel enclosures, MCB DB flush mounting type, as per accepted practice, duly embedded and end plate completely flushed in wall, cable connection etc.complete :-
-
-
-
FOR S.No :-
-
-
-
27.8.4 & 27.8.5 ; 27.9.2 to 27.9.3 ; 27.10.1 to 27.10.3 &
27.11.1 to 27.11.3
-
731
-
Supplying and fixing as per specification Call bell / buzzer of approved make with necessary materials complete.
-
-
-
Ding Dong bell
2
192
96.3
Supplying and fixing of approved make step type Modular electronic Fan regulator including connection etc. as required on existing board
-
-
-
100 Watt (2 module)
36
22323
620.1
Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete of approved as required confirming to IS :374/1979 with up to date ammendments.
-
-
-
Ceiling Fan (5 star & ISI)-1200 mm Sweep
35
71694
2048.4
Supplying, erecting and testing of approved make Exhaust Fan heavy duty with mounting frame, blades AC 230-250 complete connection and including, frame bolt/ Anchor hole fastners etc. complete finished of approved as required.
-
-
-
380mm sweep 900 RPM
2
6210
3105
Supplying, fixing & testing of approved make T- 5 lamp channel luminary with epoxy white powder coated CRCA sheet steel housing box type channel with reflector cover including electronic ballast (HF), PF 0.95, THD 30% complete duly wired (with tube rod) as per specification & fixing as below:
-
-
-
I) Fixing on wall/Ceiling on PVC plate Anchor fasteners and other necessary materials including connections etc. and as required.
45
47466
-
Supplying, Fixing and Testing of Compact Fluorescent Lamp (CFL) with inbuilt electronic ballast ISI marked BC / ES cap of approved make as required as per specification
-
-
-
11 Watt
7
1115
159.3
18 Watt
10
2043
204.3
85 watt
3
2247
749
Supplying and drawing PVC insulated copper cable ( Earth Continuity Conductor ) of Green colour FR with copper multi strand conductor ISI marked in existing conduit along with other wires as required as per specification :
-
-
-
6 Sq mm.
39.5
2061
52.2
10 Sq mm.
40
3168
79.2
Supplying, fixing & testing of approved make H.P. SV / MH fitting consisting of single piece sheet aluminium alloy deep drawn housing highly polished anodized aluminium reflector clear acrylic cover, gasket and equipped with accessories; such as ballast, condensor, ignitor, skirted ceramic lamp holder (without lamp) suitable for end mounting duly wired, including fixing with 32/38 mm dia G.I. pipe Light 'A' class of required length upto 2 Meter for mounting on wall/existing pole/on existing D bracket including bending the pipe to required shape and connections including all materials as required
-
-
-
150W
1
6495
6495
Supplying,Fixing and Testing of SV lamp SON-T (tubular clear type) ISI marked of approved make as required as per specification
-
-
-
150W
1
519
519
Supplying installing, testing & commissioning D.O. fuse
assembly with brass part contact for 33 or 11/0.4 KV DP
Structure set of 3 Nos. with fuse barrel i/c required fuse
element & other materials as per specification on existing
D.P. structure as required.
-
-
-
11 KV
1
2947
2947.5
Earthing with G.I. Earth plate 600mm X 600mm X 6mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangement on the top and G.I. watering pipe 20mm dia 2.7 Metre long etc. (but without charcoal or coke and salt ) complete as required.
1
2655
-
Add Extra for using salt and charcoal / coke for G.I. Plate or
Copper plate earth electrode as required including excavation
& refilling.
1
1656
-
Supplying and laying 6SWG (5.6mm) G.I. wire at 0.5 Metre below ground level as conductor earth electrode including soldering etc. as required.
35
724
-
Providing and fixing wooden board of suitable size (maximum 12" X 18" ) for fixing of house service Metre with necessary materials and connection testing etc. complete as per specification :
-
-
-
Three phase Meter
1
120
120
Providing and fixing circular/Hexagonal cast iron or M.S.sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by mean of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing
36
4536
126
Supplying, fixing & testing of approved make CFL street light fitting consisting of metallic sheet aluminium alloy housing, highly polished aluminium reflector clear acrylic cover, gasket and equipped with accessories; such as lamp holder (without lamp) suitable for end mounting duly wired, including fixing with 32/38 mm dia G.I. pipe LIght 'A' class of required length upto 2 Meter for mounting on wall/existing pole/on existing D bracket including bending the pipe to required shape and connections including all materials as required. Upto 85W CFL
3
6084
2028
Supplying & Installation of required capacity of single phase, 50 Hz,415V, deep well submersible pump Stainless Steel body, as per IS of approved Make, suitable for 4"/6 " tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding Pipe, SS/Nylon wire rope and connection cable.
-
-
-
1.5 H.P. with 7 to 8 stages, Head Mt 56-21, Discharge LPM 40-125
1
26504
26504.1
Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make.
-
-
-
4.0 Sq.mm multi strand
140
23310
166.5
Supplying and laying of approved make HDPE pipe as per IS : 4984 and IS : 14333 with latest amendment for installation of submersible pump with necessary connection socket /coupling tees etc
-
-
-
50mm outer Dia
140
31248
223.2
supplying and layof approved make nylon rope 12 mm thick complete with biniding for support of pump and mortar
140
9450
67.5
Asst. Project Engineer
-
-
-
PIU BHOPAL
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements