Public Health Engineering Department Tender

Providing, laying and jointing including testing following socket & spigot centrifugally cast (Spun) Ductile Iron pressure pipes with inside cement mortar lining (class K-7) conforming to IS 8329/2000 with suitable Rubber Gasket (Push on) joints as per IS:5382/85 USOR. Item.no.4.1-P.no.51 100mm Dia

Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.121 90 mm dia HDPE 6 Kg/cm²

Providing, Laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) USOR.Item.no. 9.1 -P.no.121 110 mm dia HDPE 6 Kg/cm²

Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material , installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions.Required pipes/specials and other civil work shall be paid separately - In all types of soils.HDPE pipes of any class 90 mm outer dia (USOR No 16.03 P.no.207

Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material , installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions.Required pipes/specials and other civil work shall be paid separately - In all types of soils.HDPE pipes of any class 110 mm outer dia (USOR No 16.03 P.no.207

Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122 90 mm - 6 Kg / cm²

Providing and laying HDPE Bend 90º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122 . 110 mm - 6 Kg / cm²

Providing and laying HDPE Bend 45º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122, 90 mm - 6 Kg / cm²

Providing and laying HDPE Bend 45º confirming to IS specifications. USOR.Item.no.9.2 -P.no.122, 110 mm - 6 Kg / cm²

Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123, 90 mm - 6 Kg / cm²

Providing and laying Equal HDPE Tee confirming to IS specification USOR.Item.no.9.4 -P.no.123, 110 mm - 6 Kg / cm²

Providing and laying HDPE Reducer: confirming to IS specifications. USOR.Item.no. 9.6 -P.no.124, 110 mm

Providing and laying HDPE End Cap confirming to IS specifications. USOR Item.no. 9.8 -P.no.122, 90mm

Providing & Supply of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue color manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, all taxes related to central state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electro Fusion Coupler, 90mm USOR Item.no.9.14.1.8 -P.no.129

Electro Fusion Equal Tee, 90mm USOR Item.no.9.14.2.8 -P.no.130

Electro Fusion Elbow 90 Deg. 90mm USOR Item.no.9.14.3.8 -P.no.129

Providing & Supply of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated to central, state & municipal, inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Electo Fusion Tapping Ferrule Saddle , 110mmX20mm /110mmX25mm & 90mmx20mm / 90x25mm USOR Item.no.9.10.1.14,1.15,1.8 & 1.9 -P.no.126

110mmX32mm/110mmX40mm & 90mmx32mm / 90x40mm USOR Item.no.9.10.1.16,1.17,1.10 & 1.11-P.no.126

Providing and fixing of Ductile iron double flanged sluice valves as per approved specifications for pumping main and distribution including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete USOR. Item.no.4.41-P.no. 71, 80 mm

Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming. USOR. Item.no. 16.10b -P.no 208

Providing & fixing following cast iron single air valves, small orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete as per IS :13095-1991 USOR. Item.no.8.8 -P.no 114, 25mm dia

Providing and laying mechanically mixed cement concrete with crushed stone aggregate excluding centering and shuttering (with 20 mm nominal sizegraded stone aggregate) M-15 USOR. Item.no.16.23a.ii.-P.no. 210

Providing and placing in position cold twisted steel and hot rolled deformed steel reinforcement for R.C.C. work i/c cutting, bending, binding etc. complete i/c cost of binding wire and wastage. USOR. Item.no.16.25a.-P.no. 211

Construciton of Brick masonary valve chamber with 10 cm thick M-10 PCC i/c 20 cm thick wall in 1:6 CM with thick 1:4 Cement Plaster. Inside Dimentions 110x80x100cm M-20 RCC chamber cover size 130x100 cm 10 cm thick.as per aproved specification USOR. Item.no.16.45a.-P.no. 217

Supply & errection of ready made mini pump house (control pannel box) GI sheet of 18 gauge of size 90cmx90cmx60cm with 40x40x5mm angle Iron frame to fix it 200 mm below ground level with hold fasts grouted in foundation and 600mm above ground level for clearance suitable for fixing of conrol pannel, fuse unit, main switch etc. as per aproved specification. USOR. Item.no.17.18-P.no. 228

Providing and installation of automatic water level indicator for supervisory control cum auto on/off of motor pump assembly inclusive of control panel ,500 mtr long 2 core, 4 pair cable for small rural water supply scheme, having source within 500mtr as per approved specification and as directed by Engineer in charge. (In case of lesser length of cable,equivalent amount @ Rs 12 /- per meter of short length will be deducted from above rate) USOR. Item.no.17.11.-P.no. 226

Provision for Jointing of TW to Rising Main with cost of material / Specials such as GI Union /CI Flange, GI Reducer,50 mm NRV, UPVC MTA,FTA etc as per requirement of Site i/c cost of labour etc complete.as per approved specification and as directed by engineer incharge. USOR. Item.no.17.19.-P.no. 228

Provision for Jointing of Rising Main to Sumpwell/ OHT and OHT to Distribution Pipe Line with cost of material / Specials such as Bends,MTA,FTA,Tee,flange,etc as per requirement of Site with excavation , labour as per requirement complete.as per approved specification and as directed by engineer incharge. SOR. Item.no.17.20.-P.no. 229

Household connection with MDPE pipe :- Providing and supply of Electro Fusion Tapping Ferrule ( Branch Tapping Saddle) female BSP Threaded with SS 304 insert fitting s in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black / blue color manufactured from compounded PE80/PE100 virgin poly mer and compatible with PE80/PE100 Pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application and shall be inclusive of all cost such as testing, transportation upto site, transit insurance, loading, unloading, stacking etc. complete with electro fusion tapping ferrule saddle, 90x15mm and Manufactured from virgin resin PE 80 food grade compounded Raw Material having Blue Color only with quality assurance certificate from quality agencies like WRC/ CIPET (India)/ DVGM/KIWA/SPGN etc. for usage in drinking water system the cost shall include testing of all materials, all taxes central , state, municipal, inspection charges, transportation upto site, transit insurance, loading , unloading, stacking etc. complete i/c cost of 15 mm dia UPVC Pipe , Socket, Elbow, Union,20 x15 mm dia PVC reducer and also i/c providing and fixing of 15 mm dia PVC Valve and stainless steel water tap with grounting of vertical pipe as per requirement as per approved specification and as directed by engineer incharge. USOR. Item.no.17.13.-P.no. 226

Providing and installation of sensor based auto cutoff system for dry run condition of submerssible pump.as per approved specification and as directed by engineer incharge. USOR. Item.no.17.21.-P.no. 229

Providing and fixing of ISI marked PVC insulated three core flat copper cable. 4 Sq mm

Labour charges for installation of submersible motor pumpssets of any diameter and upto any depth by any means like manual or mechanical along with lowering, fixing, jointing all required accessories like pipes cables , sockets, bends, sluice etc as required, valves, non return valves, flanges, unions and including arrangement of required T&P like tripod, chain pully, richet, all labour, all risk , making electric connection from submersible pumps to control panels, transportation upto site of work etc complete including cost of minor GI accessories like flanges, unions,elbow,bend etc for lowering and connection with pumping main .

Labour charges for installation of openwell motor pumps sets upto any depth by any means like manual or mechanical along with lowering, fixing, jointing all required accessories like pipes cables , sockets, bends, sluice valves, non return valves, flanges, unions and etc as required, including arrangement of required T&P like tripod, chain pully, richet, all labour, all risk , making electric connection from submersible pumps to control panels, transportation upto site of work etc complete including cost of minor GI accessories like flanges, unions,elbow, bend etc for lowering and connection with pumping main .

Providing laying and jointing of following galvanised Iron (MS) Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes,specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II 50 mm dia M Class

80 mm dia M Class

"Design, construction, testing and commissioning of RCC over head tank of 75 KL capacity over 12 M staging including providing and fixing of double flanged C.I. pipes for inlet, outlet, Scour and overflow delivering up to 2.50 meters away from R.C.C. outer columns of reservoir, C.I. double flanged heavy duty specials and duck foot bends conforming to Is 1538:1993 and C.I. double flanged I.S.I. marked sluice valves (Class –II) etc. and providing and fixing of all accessories such as lightening conductor, water level indicator, R.C.C. stairs from ground level to tank floor level, steel ladders from balcony to roof and Aluminium ladder from roof to inside floor level of tank, ventilating cowls, manhole covers with frame and G.I. pipe railing with RCC post for stairs and balcony tank floor level all complete as per detailed specifications complete (turnkey job) The payment of this item shall be made according to the payment schedule given in SCC.

Provision for construction of boundary wall with pile foundation and construction of MS Gate with RCC coloumn

Design, construction, testing and commissioning of underground RCC sumpwell of 20 KL with Brick masonary pumphouse over this sumpwell (Specifications of Sumpwell and pump house are mentioned in Annexure-E) payment of this item shall be made according to the payment schedule given in SCC.

Disinfection System of tube well and Sump dosing pumps of special quality (1W + 1S) suitable to hanble hypochlorite solution entire chlorine solution pipeline shall be of PVC chlorine test kit suitable to measure residuat chlorine up to 3ppm SC 16-1 25 gms/hr

11 KV line on 140 kg. 8.0 Mtrs. long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. (Schedule Ref. C-1.2 of MPMKVVCL for SOR)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for tapping DP. (Schedule Ref. C-6.2 of MPMKVVCL for SOR)

11 KV D.P. Structures on 140 kg. 8.0 mtr. long PCC poles for straight line. (Schedule Ref. C-6.1 of MPMKVVCL for SOR)

11 KV T.P. Structures on PCC poles. (Schedule Ref. C-9.2 of MPMKVVCL for SOR)

L.T. Line 1 phase 3 wire on PCC support using Aerail Bunched XLPE cable with maximum span of 50 Meter. (Schedule Ref. D-3.2 of MPMKVVCL for SOR), 2 x 35+ 1 x 16 sq. mm (Insulated nuetral massenger)

11/0.4 KV out-door type transformer sub-station. (Schedule Ref. E-1.2 of MPMKVVCL for SOR), 25 KVA on 140 kg. 8.0 meter long PCC Pole

Providing and Supply of ISI Marked BEE 5star rated energy efficient Three Phase Sub mersible pump set for 150 mm dia tube well i/c clamp set etc complete. Required discharge & head as below mentioned i/c Bore cap and clamp nut bolt NRV etc, 101 to 150 LPM discharge 120 to 200 M Head as per site conditions

Supply and installation of ISI Marked, BEE 5star rated energy efficient horizontal submersible/ centrifugal motor pump set of required discharge and head with oil merged control panel board for Sump well. 301 to 500 LPM discharge 25 to 60 M Head

Quarterly amount for Operation & Maintenance of Water Supply Scheme after successful trial-run and commissioning of entire scheme. (Annual increase/decrease in O&M will be applicable as per details given in SCC and note given below the BOQ)