Northern Coalfields Limited Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Northern Coalfields Limited - NCL Tender
Eprocure
Opening Date16 Jan 2025
Closing Soon4 Feb 2025
Tender Amount₹ 5,34,27,932
Costs
EMD
₹ 6,67,900Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Operation, Maintenance And Providing Civil And Electrical Maintenance Including Facility Management Services For Office And Or Residential Complex At Nigahi Area For Six Months
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NCL_326016_1Tender No
NGH/C/24-25/ETN-58 dated 16.01.2025Tender Authority
Northern Coalfields Limited ViewPurchaser Address
-Website
http://http://nclcil.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Notice Inviting Tender and Instruction to Bidder along with Annexures
BOQ Items
... More
Extra rates for quantities of works, executed : Note for item no. 2.24:- The extra percentage rate is applicable in respect of each item but limited to quantities of work executed in these difficult conditions. The unit, namely, metre depth, to be considered for payment, shall be the depth measured from the sub soil water level upto the centre of gravity of the quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. In or under water and/or liquid mud, including pumping out water as required.
375
41
15502.5
... More
Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
16275
18
304342.5
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
13550
9
130757.5
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm
5
2221
11109
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter
37
292
10833.6
... More
Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC Above 300mm and upto 600m wide
459603
2
1360424.88
... More
Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place(in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC Above 600mm
128158
3
504942.52
... More
Operation & safety of borewell installed in colony area (Permanent Township) as and when required to operate on regular basis to supply water in park area for emergency restoration of weater suplly when IWSS fail/required to park/required to colny sector-wise in laid pipeline.
152
2147
326436.72
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 40 mm dia nominal bore
5
584
2921.25
... More
Providing and making connection of pump with cable 4.0 sqm.
150
121
18207
... More
Operation of submersible pump set installed in bore wells in temporary township and regulating necessary valves provided in the pipeline network to ensure requisite water supply to various section located in the temp. township as per requirement and instruction of the EIC.The supply is to be maintained for atleast in two shift of eight hrs. including supervision,inspection and prompt repairing of any breakdown / hindrance for immediate for valve of work/day in two shift with minimum manpower per day.
(i) Semi-skilled : 4 Nos
(ii) Skilled (fitter) : 1 No
180
3487
627836.4
... More
Rewinding of Motors 7.5 HP
1
2823
2823.28
... More
Rewinding of Motors 12.5 HP
1
4088
4088.88
... More
Repairing of submersible motor 7.5 HP - 2 Nos Rotor shaft repairing change (both side)
1
535
535.45
... More
Repairing of submersible motor 7.5 HP - 2 Nos Bush Change
1
350
350.47
... More
Repairing of submersible motor 7.5 HP - 2 Nos Lock
1
155
155.77
... More
Repairing of submersible motor 7.5 HP - 2 Nos Water Seal
1
360
360.21
... More
Repairing of submersible motor 7.5 HP - 2 Nos Nut & Bolts
1
204
204.45
... More
Repairing of submersible motor 7.5 HP - 2 Nos Servicing,fitting & Testing
1
506
506.24
... More
Repairing of submersible motor 12.5 HP - 3 Nos Rotor shaft repairing change (both side)
1
535
535.45
... More
Repairing of submersible motor 12.5 HP - 3 Nos Bush Change
1
350
350.47
... More
Repairing of submersible motor 12.5 HP - 3 Nos Lock
1
155
155.77
... More
Repairing of submersible motor 12.5 HP - 3 Nos Water Seal
1
360
360.21
... More
Repairing of submersible motor 12.5 HP - 3 Nos Nut & Bolts
1
204
204.45
... More
Repairing of submersible motor 12.5 HP - 3 Nos Servicing,fitting & Testing
1
506
506.24
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 40 mm dia nominal bore
57
455
25983.45
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore
62
563
34949.4
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 15 mm dia nominal bore
188
259
48814.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL 20 mm dia nominal bore
135
309
41728.5
... More
Providing and fixing brass bib cock of approved quality : 20 mm nominal bore
3
284
854.1
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
93
1089
101328.15
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
3
446
1339.95
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White
85
840
71442.5
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
142
39
5580.6
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
9
565
5087.25
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore
3
1188
3565.8
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Angle back wash basin size 600 x 480 mm with single 15 mm C.P. brass pillar tap
5
2365
11828
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 50 mm nominal bore. Horizontal
1
1018
1018.9
... More
Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)(Every four months)
2841125
-
710281.25
... More
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge.
11
241
2660.35
... More
Supply of GI Socket Reducer 25 mm to smaller size
19
30
579.31
... More
Supply of GI Socket Reducer 40 mm to 25 mm size
5
79
396.35
... More
Supply of GI Socket Reducer 50 mm to 40 mm size
3
91
274.41
... More
Supply of GI Elbow 40 mm dia
3
79
237.81
... More
Supply of GI Elbow 50 mm dia
3
121
365.88
... More
Supply of GI tees equal 15 mm dia
105
30
3201.45
... More
Supply of GI tees equal 20 mm dia
8
42
341.52
... More
Supply of GI tees equal 40 mm dia
8
97
780.56
... More
Supply of GI Unions 15 mm dia
8
42
341.52
... More
Supply of GI Unions 20 mm dia
8
60
487.84
... More
Supply of GI Unions 25 mm dia
5
79
396.35
... More
Supply of GI Unions 40 mm dia
12
146
1756.2
... More
Supply of GI Unions 50 mm dia
12
219
2634.24
... More
Supply of GI Plugs 15 mm dia
5
6
30.5
... More
Supply of GI Plugs 20 mm dia
1
9
9.76
... More
Supply of GI Plugs 25 mm dia
1
14
14.63
... More
Supply of GI Plugs 40 mm dia
1
19
19.51
... More
Supply of GI Plugs 50 mm dia
1
30
30.49
... More
Providing GI Socket (equal) as per ISI approved 40 mm dia
1
48
48.78
... More
Providing GI Socket (equal) as per ISI approved 50 mm dia
1
97
97.57
... More
Providing & Fixing steel Spandle with chuck nut of required size for CI Sluice valve : 50 mm dia
9
522
4704.12
... More
Providing & Fixing steel Spandle with chuck nut of required size for CI Sluice valve : 80 mm dia
3
900
2700.48
... More
Providing & Fixing of sluice valves (with cap) complete with nut,bolts,rubber washer etc. complete : 50 mm dia
7
1442
10094
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. : 80 mm diameter Class II
2
3567
7134.52
... More
Providing and fixing nut bolt for flange of approved quality as per instruction of EIC
10
139
1393.8
... More
Supply of gallon dori for GI Sluice valve 6 mm to 20 mm thick of approved quality as per instruction of EIC
6
209
1254.42
... More
Lifting the damaged submersible pump and motor cable etc,replacing it with working one and lowering the pump and motor assembly including cable in bore holes dismanteling the pipe during lifting and fixing the pipe during lowering with all materials and labour ,tools and plant etc complete as per inst of EIC
5
4887
24437.1
... More
Providing and fixing rubber packing 5 mm thick complete as per instruction of EIC
10
116
1161.5
... More
Cleaning of choked GI pipeline 15 mm to 40 mm dia including trenching,refitting at same place complete as per instruction of EIC
150
20
3108
... More
Providing GI flange ISI/Approved quality 50 mm dia
5
116
580.75
... More
Providing GI flange ISI/Approved quality 80 mm dia
3
139
418.14
... More
Supply of washer for bib cock,stop cock etc as per instruction of EIC (1 packet containing minimum 100 Nos for 15 mm dia)
3
16
48.09
... More
Supply of GI nipple 40 mm dia
3
67
201.24
... More
Supply of GI nipple 50 mm dia
3
29
87.6
... More
Supply of GI Elbow Reducer 20 * 15 mm
25
19
486.75
... More
Supply of GI Elbow Reducer 25 * 20 mm
8
25
202.48
... More
Supply of GI Elbow Reducer 40 * 20 mm
1
36
36.99
... More
Supply of GI Elbow Reducer 50 * 20 mm
1
53
53.54
... More
Anti Adult Measures:- General desinfection/pest control with new generation odurless,colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mousquitos ,house flies etc. Using Residual spray of Deltamethrin 2.5%SC Flow (K-otherene or approved equivalant ) insecticides should be sprayed uniformaly over the surfaces of walls ceiling etc. frequency - once in 3 months
455869
111
507427.78
... More
Anti Adult Measures:- General desinfection/pest control with new generation odurless,colourless insecticides which should be safe for human being and effective for all kind of house hold insects like mousquitos ,house flies etc. Using Residual spray of Cyfluthrin 5 % EW (sOLFACE ew 050 OR APPROVED EQUIVLANT )insecticides should be sprayed uniformaly over the surfaces of walls ceiling etc. frequency - once in 3 months
455869
108
494162
... More
Thermal fogging:- With chemical Delthamethrine ( King Fog or approved equivalent )1.25 ULV mixed with Diesel in the ratio 1:199 outdoor operation in Colony and Hospital Building etc. Frequency -Monthly
2653862
13
364906.03
... More
Anti Larva Measure :Treatment using Diflubenzuron 25 % WP ( Bi-Larva or approved equivalent ) solution to be spread as per - instruction of EIC. Frequency -weekly
760135
51
394738.11
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
260
152
39572
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).
20
6036
120723
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size).
37
5402
199909.15
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars
415
101
42018.75
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
5
7599
37995.75
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)
1750
215
377037.5
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)
375
229
86006.25
... More
Neat cement punning.
375
53
20175
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
22
1634
35953.5
... More
Providing and fixing soil, waste and vent pipes :100 mm dia: Sand cast iron S&S pipe as per IS: 1729
52
863
44896.8
... More
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe
412
118
48986.8
... More
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.: 100 mm dia : Sand cast iron S&S as per IS - 1729
15
460
6910.5
... More
Providing and fixing plain bend of required degree. 100 mm dia: Sand cast iron S&S as per IS - 1729
17
358
6094.5
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet: Sand cast iron S&S as per IS: 3989
69
1246
86005.05
... More
Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
62
266
16513.7
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
25
1337
33432.5
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.: In cement mortar
25
1130
28267.5
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1000
30
30300
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
37
532
19717.3
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
625
250
156468.75
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door: 110x110x110 mm
37
178
6598.95
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°: 110 mm bend
140
114
16044
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain): 110 mm Shoe
95
100
9561.75
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
412
223
92061.4
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. one coat
750
54
40762.5
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
750
63
47250
... More
Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm).
5000
47
237500
... More
Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
625
68
42875
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
1000
65
65500
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
250
94
23500
... More
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm
75
3055
229188.75
... More
Providing and fixing terminal guard :100 mm : Sand cast iron S&S as per IS - 1729
25
341
8527.5
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
250
845
211350
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Double charge vitrified tile polished finish of Size of Tile 600x600 mm. Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3 kg/ sqm.
225
1070
240851.25
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type: 100 mm nominal dia
125
28
3606.25
... More
Providing and fixing PTMT grating of approved quality and colour. Circular type 125 mm nominal dia with 25 mm waste hole
75
39
2947.5
... More
Providing and fixing 15 mm C.P. brass pillar taps: 15 mm C.P. brass pillar taps
25
360
9018.75
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Semi rigid pipe: 32 mm dia
412
78
32527.4
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Semi rigid pipe : 40 mm dia
301
88
26563.25
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. INTERNAL WORK - EXPOSED ON WALL: 25 mm dia nominal bore
111
398
44178
... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
127
263
33496.25
... More
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
50
263
13187.5
... More
Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
12
284
3416.4
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
16
462
7394.4
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
13
614
7982.65
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
1
762
762.45
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore
10
261
2618.5
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 20 mm nominal bore
10
302
3020.5
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore
8
388
3104.4
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length: 15 mm nominal bore
363
74
26952.75
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
105
144
15162
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank: Circular tank
6250
8
52187.5
... More
Providing and fixing PTMT bib cock of approved quality and colour.: 15mm nominal bore, 86 mm long, weighing not less than 88 gms
825
95
78663.75
... More
Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 107 mm long, weighing not less than 110 gms
80
156
12556
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.:15 mm nominal bore, 105 mm long, weighing not less than 138 gms
94
140
13183.5
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.: 20 mm nominal bore, 120 mm long, weighing not less than 198 gms
3
194
582.15
... More
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.: 25 mm nominal bore, 152mm long, weighing not less than 440 gms
5
398
1994
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm
75
974
73095
... More
Providing and fixing kitchen sink including making all connections excluding cost of fittings.: White glazed fire clay sink of size 600x450x250 mm
11
1609
17704.5
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
54
724
39096
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
87
423
36835.8
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm
75
30
2306.25
... More
Renewing wrought iron or ms wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete
3
137
411.45
... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
37
53
1964.7
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
62
43
2715.6
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
5
873
4367.75
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
12
197
2368.8
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
12
64
768.6
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
12
50
610.2
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm
25
45
1128.75
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
10
2079
20798
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
25
1640
41002.5
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
375
104
39075
... More
Renewal of old putty of glass panes (length)
250
32
8137.5
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 150 mm
6
51
307.8
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm
5
44
224.5
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
10
1065
10656
... More
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
500
44
22450
... More
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia
25
323
8096.25
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
2
610
1221.6
... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
62
407
25277.4
... More
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm
19
23
447.45
... More
Providing and fixing aluminum U beading of required size to Pre-laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge
50
460
23017.5
... More
30 mm thick wire mesh shutter
25
2254
56350
... More
Providing and fixing ball bearing for rolling shutters.
5
368
1841.25
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
12
787
9450.6
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for door, windows and clerestory window, panelling or panelled or panelled and glazed shutters 25mm to 40mm thick kiln seasoned and chemically treated hollock wood.
37
1677
62058.25
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. Without 2nd class teak wood beading 62X19 mm
25
587
14675.25
... More
Providing Nickel plated bright finished mild steel piano hinge 1mm thick 25 mm wide with necessary screws.
8
39
312
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
10
4240
42403.5
... More
Providing and fixing by welding hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. and priming coat with approved steel primer all complete
25
1211
30282.5
... More
Welding of hinge, gate locking arrangement, pintel door, window frame and grill etc
300
38
11604
... More
Providing and fixing 4 mm thick plywood plane lining with necessary screws, priming coat on exposed surface etc. complete with commercial ply facing of approved manufacturer : 4 mm thick both side commercial ply
62
275
17051.24
... More
Providing and fixing 18 mm thick both side commercial ply wood board in shelves with screws and fitting as and when required .edges to be painted with wood primer(fittings to be paid separately)
50
466
23300
... More
Supply of ply wood water proof ply 12 mm thick
100
510
51000
... More
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
1
2630
2630.65
... More
Re-lettering with black Japan paint of approved brand and manufacture.
25000
3
87500
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
90
745
67068
... More
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick. Granite of any colour and shade
12
2414
28977
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm
8
3821
30571.2
... More
Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.
20
1914
38281
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
90
41
3730.5
... More
Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.
3
80
241.5
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 25 mm dia nominal bore
12
336
4032
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
12
667
8007
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.: 15 mm nominal bore
10
582
5825.5
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :15mm nominal bore
12
534
6411
... More
Providing and fixing PTMT, push cock of approved quality and colour.: 15 mm nominal bore, 98 mm long, weighing not less than 75 gms
2
83
167.5
... More
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid
50
509
25460
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm
2
885
1771
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore
52
500
26044.2
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 20 mm nominal bore
50
524
26205
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required :25 mm nominal bore
40
593
23752
... More
Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 40 mm nominal bore
32
727
23278.4
... More
Cement concrete flooring 1:2:4 finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps, etc. complete 25 mm thick with 12.5 mm nominal size stone aggregate
3750
323
1211250
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
25
1344
33615
... More
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board: 510x1040 mm bowl depth 200 mm
12
5186
62238
... More
Providing and fixing CP waste jalli : 32 mm
69
89
6168.6
... More
Providing and fixing CP waste jalli : 40 mm
56
95
5334
... More
Brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth : In cement mortar 1:6 (1 cement : 6 Coarse Sand)
37
5193
192170.6
... More
Brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in superstructure above plinth level upto floor V level : In cement mortar 1:6 (1 cement : 6 Coarse Sand)
22
6306
138741.9
... More
Half-brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in all respect in foundation and plinth : In cement mortar 1:4 (1 cement : 4 Coarse sand)
125
657
82187.5
... More
Half-brickwork with non-modular FALG bricks conforming to IS: 12894,class designation 7.5 average compressive strength etc. complete in all respect in superstructure above plinth level upto floor V level : In cement mortar 1:4 (1 Cement : 4 Coarse Sand)
25
779
19487.5
... More
Supply of GI elbow 15 mm nominal bore
125
19
2438.75
... More
Supply of GI elbow 20 mm nominal bore
80
30
2439.2
... More
Supply of GI elbow 25 mm nominal bore
49
39
1912.47
... More
Supply of GI Tee 20 mm nominal bore
41
42
1750.29
... More
Supply of GI Tee 25 mm nominal bore
35
24
851.55
... More
Supply of GI Socket 15 mm nominal bore
300
13
4026
... More
Supply of GI Socket 20 mm nominal bore
75
18
1371.75
... More
Supply of GI Socket 25 mm nominal bore
55
29
1609.85
... More
Supply of GI Nipple 15 mm nominal bore
450
12
5490
... More
Supply of GI Nipple 20 mm nominal bore
150
30
4573.5
... More
Supply of GI Nipple 25 mm nominal bore
90
48
4390.2
... More
Supplying and fixing of PVC cover for PVC/Sintex tank as and when required as per instruction of EIC
180
160
28852.2
... More
Cleaning of sludge line and traps (kitchen & toilet) of all diameters at different floors including opening of joints, cleaning of pipe line and again jointing and flushing with fresh water all complete with tools and tackles as per instruction of EIC.
500
16
8170
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned selected planks of sheesham wood 30 mm thick shutters
5
2406
12032.75
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Particle Board 12 mm thick Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked
8
1848
14787.2
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
10
1523
15239.5
... More
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
3
1478
4436.55
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding
50
170
8515
... More
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 100x58x1.90 mm
15
29
441
... More
Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 75x47x1.70 mm
20
24
484
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
75
140
10503.75
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 200x10 mm
75
50
3806.25
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 100x10 mm
125
32
4000
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
75
28
2167.5
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
125
23
2887.5
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
150
115
17257.5
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5 mm angle iron and 2 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 20x5mm for diagonal braces and central cross piece
3
4033
12101.25
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
50
122
6127.5
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
250
427
106787.5
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
25
867
21698.75
... More
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)
125
281
35206.25
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
125
95
11962.5
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
1
740
740.8
... More
White washing with lime to give an even shade : Old work (two or more coats)
1625
13
22018.75
... More
Distempering with 1st quality acrylic distemper (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade. One or more coats on old work.
1782
41
73151.1
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Old work (One or more coat applied @ 0.90 ltr/10 sqm).
2500
58
146000
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
3
825
2475.9
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below
25
80
2017.5
... More
Supplying and stacking at site. Moorum
12
742
8904
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire
25
15
390
... More
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5
6163
30815.75
... More
Reparing of old MS door shutter by using 1mm thisk MS sheet and flat of requried by weilding and priming all complete
112
98
11030.88
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
25
232
5807.5
... More
Deduction for not providing hinges in pannel door window clearstorey window etc all complete as per direction of EIC kiln seasoned selected palnk of sheesham wood.
25
-175
-4396.25
... More
Spreading and levelling to gradient kankar/single/gravel/Morrum/ red bajri etc
12
28
342.96
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)
50
432
21602.5
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
25
566
14153.75
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
50
31
1597.5
... More
Providing and fixing bowl for coupled wc with pp soft close seat cover, hinges, fixing accessories set size 375 x 650 x 770 mm with cistern and fittings of jaguar make or equivilent.
1
10830
10830.58
... More
Providing and fixing hand shower of jaguar make or equivilent.
5
1080
5404.4
... More
Providing and fixing swivel towel holder twin type of jaguar make or equivilent.
3
2089
6269.4
... More
Providing and fixing angular stop cock with wall flange of jaguar make or equivilent.
6
908
5451.66
... More
Providing and fixing two way bib cock with wall flange of jaguar make or equivilent.
4
1548
6193.72
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 20 mm nominal outer dia. Pipes.
25
251
6291.25
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 25 mm nominal outer dia .Pipes.
50
324
16205
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 32 mm nominal outer dia. Pipes.
50
398
19935
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes.
8
392
3143.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia .Pipes.
8
490
3923.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia .Pipes.
8
565
4525.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 40 mm nominal outer dia. Pipes.
8
454
3639.2
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 50 mm nominal outer dia. Pipes.
8
674
5393.6
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified.
12
993
11917.8
... More
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat.
3
879
2638.95
... More
Providing and fixing Stainless Steel A Isis 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm.
5
2709
13546.5
... More
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes.
125
135
16981.25
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
6
2337
14022
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade :Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface
2500
87
217500
... More
French spirit polishing :Two or more coats on new works including a coat of wood filler
50
263
13170
... More
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
25
121
3038.75
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood.
0.25
61219
15304.79
... More
Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately
5306
76
406704.9
... More
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead 100 mm dia pipe .
50
42
2142.5
... More
Refixing of CI pipe as per instruction of EIC
50
55
2752
... More
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :For 100 mm dia pipe
12
222
2667.6
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material Beyond 60 cm girth upto and including 120 cm girth
12
1304
15653.4
... More
Removing and uprooting of unwanted Vegetation grown over the drainage pipes, walls, chhajjas, balcony and similar locaton of building upto floor Vth level with all tools & plants required with safety precautions and making good the same with plaster including disposal of material / tree roots etc. at the required place all complete as per instruction of EIC
625
412
257693.75
... More
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :100x100x100x100 mm Sand cast iron S&S as per IS - 1729
12
901
10821
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100x100x100 mm Sand cast iron S&S as per IS - 1729
16
582
9323.2
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)
250
415
103975
... More
GI metal ceiling Lay in plain Tegular edge Global whiteProviding and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. colour tiles of size 595x595 mm, and 0.50 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm ( both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
25
1310
32757.5
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
50
3884
194207.5
... More
Providing and fixing wall paper as per instruction of Engineer in charge
50
1716
85842
... More
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
25
768
19210
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement
25
780
19500
... More
Small petty repair works such as patches on wall , hole repair etc
375
253
95145
... More
Small petty carpentary work such as small repair of doors, windows, making hole, fixing of miscellaneous fixtures etc.
1250
211
263750
... More
Small petty water supply related works
1875
63
118968.75
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.
250
72
18097.5
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
250
257
64332.5
... More
Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the Engineer-in- charge. Wooven PVC cloth
250
39
9920
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter Class I
1
3460
3460
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :150 mm diameter Class I
1
5058
5058
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :200 mm diameter Class I
1
9892
9892.15
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 250 mm diameter Class I
1
14278
14278.3
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :300 mm diameter Class I
1
19779
19779.85
... More
Providing and laying S&S centrifugally cast (Spun) iron pipes (Class LA) confirming to IS-1536:150 mm dia pipe
2
1559
3119.4
... More
Providing and laying S&S centrifugally cast (Spun) iron pipes (Class LA) confirming to IS-1536:200 mm dia pipe
2
2640
5280.5
... More
Providing and laying S&S centrifugally cast (Spun) iron pipes (Class LA) confirming to IS-1536:250 mm dia pipe
2
3448
6897.2
... More
Supplying pig lead at site of work
1
24391
24391.5
... More
Providing lead caulked joints to spun iron or CI pipes and specials incl. testing of joints but excluding the cost of pig lead: 150 mm dia meter pipe
3
293
880.5
... More
Providing lead caulked joints to spun iron or CI pipes and specials incl. testing of joints but excluding the cost of pig lead: 200 mm dia meter pipe
3
584
1753.35
... More
Providing lead caulked joints to spun iron or CI pipes and specials incl. testing of joints but excluding the cost of pig lead: 250 mm dia meter pipe
1
730
730.5
... More
Providing lead caulked joints to spun iron or CI pipes and specials incl. testing of joints but excluding the cost of pig lead: 300 mm dia meter pipe
1
879
879.35
... More
Providing and laying S&S standard such as tee bends, colour, tappers, caps etc (Heavy duty) up to 300 mm dia
0.5
7004
3502.28
... More
Providing & Fixing bolts and nuts including washers
50
108
5440
... More
Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refiling etc. external work 80 mm dia. Nominal bore.
12
872
10474.2
... More
Welding by gas or electric paint incluidng transportation of plant at site etc complete.
250
2
737.5
... More
Operation of pumps sets installed in and for permanent township of nigahi and regulation of necessary controlling valves provided in the water supply pipe line network to ensure requisite water supply to various sector of residential quarters, service buildings, community building etc. situated in pemanent township as per reuirement. and instruction of the EIC. The supply of water is to be maintained in three shift of 8 hrs working each including routine maintenance and repair of external pipelines and valves of all sizes such as valves leakage, joint repairing / leakage etc. Also routine maintencance of pump sets such as oiling greassing and cleaning for proper running etc. by deploying manpower as reqd. including T & P etc all complete as per instructions of EIC. The following manpower for day to day to be engaged:
(i) Supervisor 1 nos. (ii) pump operator- 9 nos (iii) Valveman - 9 Nos. (iv) fitter- 1 nos (v) Helper-1 nos (Note: In case of not deploying minimum abovementioned workmen, deduction of an amount of double rate of item rate will be made)
180
13305
2394900
... More
P & F gland packing in various capacity motor/pumps/ valves
19
209
3972.33
... More
Providing rubber gasket for instruction of pipe joints (flange joints ) of required thickness as approved by EIC
37
116
4297.55
... More
Providing CI foot valves with strainer of make as per instruction of ElC: 100 mm dia nominal bore
1
609
609.79
... More
Providing CI foot valves with strainer of make as per instruction of ElC: 150 mm dia nominal bore
1
4878
4878.3
... More
Providing CI foot valves with strainer of make as per instruction of ElC: 200 mm dia nominal bore
1
9756
9756.6
... More
Repairing of sluice valve or M.S. spindle and other fittings: 50 mm
3
522
1568.04
... More
Repairing of sluice valve or M.S. spindle and other fittings: 80 mm
3
900
2700.48
... More
Repairing of sluice valve or M.S. spindle and other fittings: 100 mm
3
1045
3136.05
... More
Repairing of sluice valve or M.S. spindle and other fittings: 150 mm
3
1219
3658.74
... More
Repairing of sluice valve or M.S. spindle and other fittings: 200 mm
3
1393
4181.4
... More
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
310145
4
1519710.5
... More
Cleaning, mopping & washing of floor of public building other places with detergents,bleaching powder etc. all complete with tools,tackles and consumable to make the floor clean & hygienic as per instruction of EIC
4361443
62
2728954.89
... More
Cleaning of door shutter,window shutters including chowkhats,windows grills,glass panes,cobwebs etc of service/community buildings with necessary detergents,chemical etc. complete as per instruction of EIC
52158
80
42206.25
... More
Cleaning of toilet with attached with hostel rooms, office chambers etc. including cleaning of floors, skirting & dado, WC pan(India/European type), wash basin, shelves, mirror and other fittings, if any, by hand dusting and cleaning with soap solution, acids, deodorants, phenyl etc. to make the toilet clean and hygienic and providing naphthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC(for community & service building)
12317
16
203353.67
... More
Cleaning of general/commom toilet including cleaning of WC pan (Indian/European type),wash basins,urinals by hand dusting and cleaning with soap solution,acids,deodrants,phenyl etc. to make the toilet clean & hygeinic including providing napthalene balls in urinals etc complete with all tools & consumables as per instruction of EIC
19710
24
492355.8
... More
Cleaning of surface drain including disposal of muck/sludge through trolley or other arrangement to a specified place (in no case it shall be kept on drain banks) within a lead of 1Km complete with all tools & tackles as per instruction of EIC Upto 300m wide
348511
2
822485.96
... More
Brooming & cleaning of all roads in colony and within the premises of service building and other places as requried with all tools & tackles and stacking the garbage at specified place as per instruction of EIC.
9370916
23
2215284.54
... More
Cleaning of all types of roof including removal of dry leaves,weeding and cleaning drain holes,brooming etc all complete with tools & tackles and stacking the garbage at specified place as per instruction of EIC
129964
29
38404.36
... More
Cleaning of Inspection chamber of all sizes and disposal of sludge etc. all specified place outside the colony with all leads including removal & replacing of top cover mending the damages of cover and chamber,if any etc. as per instrution of EIC.
759
197
149523
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Liquid Soap (Fem or equivalant)
185
223
41345.65
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Toilet soap 100 gm (Lifebuoy or equivalent)
306
16
5128.56
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Odonil
717
40
29289.45
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Room Freshner
30
179
5375.1
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner,colin etc Colin (500 ml)
41
72
2986.44
... More
Supplying and application of following toilet paper like liquid soap, odonil, mosquito reppelllant, room freshner, colin etc Mosquito reppellant
420
70
29765.4
... More
Providing services for collection of waste material occurred during the collection of samples and testing of patient at hospital as per instruction of EIC. Unskilled - 01 no. (Note: In case of not providing services, deduction of an amount of double rate of item rate will be made)
145
573
83198.1
... More
Carriage of material by Mechanical Transport including loading, unloading and stacking Earth Lead - 1 Km
220
135
29711
... More
Collection of garbage from door to door and disposal of the same through closed vehicle with seperate arrangement of dry / wet waste, necessary sound system and GPS arrangement to the specified place within a lead of 4 kms including sweeping of staircase ( for 1st and 2nd floor etc.) with all tools and tackles complete as per instruction of the EIC. 1st floor (Note:If not collected deduction of an amount of double rate of item rate will be made)
97905
11
1172901.9
... More
Collection of garbage from door to door and disposal of the same through closed vehicle with seperate arrangement of dry / wet waste ,necessary sound system and GPS arrangement to the specified place within a lead of 4 kms including sweeping of staircase ( for 1st and 2nd floor etc.) with all tools and tackles complete as per instruction of the EIC. 2nd floor (Note:If not collected deduction of an amount of double rate of item rate will be made)
95313
14
1369647.81
... More
Cleaning of D type toilet (floor area up to 10 sqm) including cleaning of dado , skirting, WC pan (Indian/ European type),wash basins, urinals,glass shelves, mirrors and other fittings, if any for D type or equivalent qtr. including any other wash basin out side the toilet by hand dusting and cleaning with soap solution, acids, deodrants, phenyl etc. to make the toilet clean and and hygienic and providing napthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC.
7367
24
182185.91
... More
Cleaning of C type toilet (floor area up to 8 sqm) Including cleaning of dado , skirting, WC pan (Indian/ European type),wash basins, urinals,glass shelves, mirrors and other fittings, if any foe C type or equivalent qtr. including any other wash basin out side the toilet by hand dusting and cleaning with soap solution, acids, deodrants, phenyl etc. to make the toilet clean and and hygienic and providing napthalene balls in urinals complete with all tools, tackles & consumables as per instruction of EIC.
7696
18
141375.52
... More
Cleaning of toilet including WC pan,wash basin,other fittings,if any for "B" & lower type Quarter by hand dusting and cleaning soap solution acids,deodorants,phenyl etc.to make the toilt clean & hygienic all complete with tools,tackles & consumables as per instruction of EIC.
35429
12
448176.85
... More
Cleaning of choked sewer line & sludge line of all diameters including removal of earth opening of joints,cleaning of pipeline,making joints leak proof etc all complete including disposal of sludge materials outside the colony with all leads at specified place with tools & tackles as per instruction of EIC
1490
14
22022.2
... More
Disposal of dead animal including transportation to the specified place,making earth pit,disposal of dead animal into pit with adequate of salt,lime bleaching power etc. and refilling the pit with wearth all complete with tools,tackles and consumbales as per instruction of EIC. Big animal (Cow,Buffalo,OX and the like)
72
1351
97296.48
... More
Disposal of dead animal including transportation to the specified place,making earth pit,disposal of dead animal into pit with adequate of salt,lime bleaching power etc. and refilling the pit with wearth all complete with tools,tackles and consumbales as per instruction of EIC. Small animal (Dog,Cat,fox,pig,birds and the like)
80
371
29720
... More
Trimming of tree branches in colony/plant & near boundary wall including disposal of branches outside the periphery of the colony & plant area as per instruction of EIC
670
58
39215.1
... More
Collection of garbage from door to door and disposal of the same through closed vehicle with seperate arrangement of dry / wet waste, necessary sound system and GPS arrangement to the specified place within a lead of 4 kms including sweeping of staircase ( for 1st and 2nd floor etc.) with all tools and tackles complete as per instruction of the EIC. Ground floor (Note:If not collected deduction of an amount of double rate of item rate will be made)
119713
9
1148047.67
... More
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm
375
30
11531.25
... More
Renewing wrought iron or ms wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete
3
137
411.45
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm
50
140
7002.5
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm
100
28
2890
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 100 mm
100
23
2310
... More
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
37
53
1964.7
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm
60
43
2628
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
12
873
10482.6
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
20
197
3948
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
31
64
1985.55
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
25
50
1271.25
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm
25
45
1128.75
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
25
2079
51995
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
75
1640
123007.5
... More
Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters
75
175
13188.75
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
375
104
39075
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
37
740
27409.6
... More
Renewal of old putty of glass panes (length)
500
32
16275
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 150 mm
6
51
307.8
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 100 mm
5
44
224.5
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness
10
1065
10656
... More
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
750
44
33675
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
750
95
71775
... More
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : 20 mm dia
25
323
8096.25
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
2
610
1221.6
... More
Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
60
407
24462
... More
Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm
19
23
447.45
... More
Providing and fixing aluminum U beading of required size to Pre-laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge
50
460
23017.5
... More
30 mm thick wire mesh shutter
37
2254
83398
... More
Providing and fixing ball bearing for rolling shutters.
5
368
1841.25
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area 3 sq. metres and below
225
80
18157.5
... More
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
25
787
19688.75
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestorey windows, including ISI marked ms pressed butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for seperately, all complete as per the direction of Engineer in charge. Kiln seasoned and chemically treated hollock wood 30 mm thick shutters
100
1848
184840
... More
Deduct for not providing hinges in doors, windows or clerestory window shutters with : Stainless steel butt hinges with stainless steel screws : For 2nd class teak wood and other class of wood shutters
100
-175
-17585
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for door, windows and clerestory window, panelling or panelled or panelled and glazed shutters 25mm to 40mm thick kiln seasoned and chemically treated hollock wood.
80
1677
134180
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. Without 2nd class teak wood beading 62X19 mm
50
587
29350.5
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 25 mm thick (for cupboard) without ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
25
1478
36971.25
... More
Providing Nickel plated bright finished mild steel piano hinge 1mm thick 25 mm wide with necessary screws.
8
39
312
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces
20
4240
84807
... More
Providing and fixing by welding hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. and priming coat with approved steel primer all complete
50
1211
60565
... More
Welding of hinge, gate locking arrangement, pintel door, window frame and grill etc
300
38
11604
... More
Providing and fixing 4 mm thick plywood plane lining with necessary screws, priming coat on exposed surface etc. complete with commercial ply facing of approved manufacturer : 4 mm thick both side commercial ply
100
275
27502
... More
Providing and fixing 18 mm thick both side commercial ply wood board in shelves with screws and fitting as and when required .edges to be painted with wood primer(fittings to be paid separately)
100
466
46600
... More
Supply of ply wood water proof ply 12 mm thick
200
510
102000
... More
Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One or more coats on old work.
5025
54
273108.75
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
1800
63
113400
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
1000
65
65500
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 4 mm
11
740
8148.8
... More
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
250
94
23500
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
21
46
977.55
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
21
1089
22880.55
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
21
724
15204
... More
Lettering with black Japan paint of approved brand and manufacture
3150
3
11025
... More
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
42
232
9756.6
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
21
620
13029.45
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
5
1523
7619.75
... More
25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places
19
2216
42107.8
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type)
25
132
3312.5
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm
84
76
6459.6
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm
42
197
8290.8
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
84
50
4271.4
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece
10
4033
40337.5
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters, With ISI marked M.S. pressed butt hinges bright finished of required size, Kiln seasoned and chemically treated hollock wood
10.5
2254
23667
... More
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood, 30 mm thick shutters
11
1848
20332.4
... More
Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710
6
1727
10364.1
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
10
2071
20712
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Ply wood 5 ply, 9 mm thick, Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type
10
1958
19582.5
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
175
461
80797.5
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).
285
247
70523.25
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
518
28
14866.6
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
458
41
18984.1
... More
Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately).
67884
27
1836262.2
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Play grounds / Public parks (1Mali for 2.00Acre).
678840
1
1323738
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Permanent office accommodation.(1Mali for 1.25Acre)
66563
3
206345.3
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Prestigious works / Rajpath/C Hexagon (1Mali for 1.00Acre)
90555
3
348636.75
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge Open spaces(1Mali for 3.00Acre).
614
1
767.5
... More
Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/edge bed watering, manureing and applying insecticides and fungicides etc.(excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.
22459
18
421106.25
... More
Maintenance of potted plant Earthen pot in displayed at ground floor only in bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For Earthen pot 750 Nos)
13200
19
262680
... More
Maintenance of potted plants Cement pots at ground floor in flats and ground floor bungalow,office complex including application of good earth, manure, insecticide, pesticide and fertilizer, removing of dry parts by pruning, cleaning dry leaves and displaying in appropriate place and replacement of broken pots coloring of pots and change of location of pots and replacing with fresh plants as and when required ( Materials provided by the department) as per direction of officer in charge (For of Cement pots 300 no)
6600
49
328350
... More
Providing and Displaying plants Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge.
75
32
2460
... More
Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge.
75
150
11302.5
... More
Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type cement pots & as per direction of the officer-in-charge.
25
592
14811.25
... More
Providing and displaying of Croton baby golden variety having ht.30 cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.
15
85
1276.5
... More
Providing and displaying of Croton Duck foot (Elite) having ht. 45 cm and above with 3 to 4 branches, well developed, fresh and healthy leaves in 25 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge.
15
112
1691.25
... More
Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge.
15
1947
29212.5
... More
Providing and Displaying Cycus revoluta in 35 cm challi, specimen , having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed as per direction of the officer-in-charge.
15
1183
17758.5
... More
Providing and Displaying Cyprus Golden 30 to 45 cm ht. well developed good Golden colour foliage, Conial Shape in 25 cm Earthen Pots as per direction of the officer-in-charge.
15
379
5688.75
... More
Providing and Displaying Fishtail palm well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen in 35 cm Cement Pot as per direction of the officer-in-charge.
15
307
4612.5
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Chrysanthemum double
15
400
6000
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double
19
525
9975
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Marigold Inca hybrid
20
500
10000
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Pansy Hybrid
12
650
7800
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Salvia Hybrid different colour
12
500
6000
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid
10
600
6000
... More
Supplying and stacking of winter seasonal seedling/cutting at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Poppy double
10
500
5000
... More
Supplying and stacking of summer and rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Gaillardia Double
10
420
4200
... More
Supplying and stacking of summer and rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Kochia
13
420
5460
... More
Supplying and stacking of summer and rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Sunflower Dwarf
10
500
5000
... More
Supplying and stacking of summer and rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Zinnia hybrid
10
420
4200
... More
Supplying and stacking of summer and rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Vinca Hybrid
10
420
4200
... More
Supplying and stacking of summer and rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos plants as per direction of the officer-in-charge. Cosmos hybrid
10
600
6000
... More
Supply at site good quality pots Earthern pots of 12'' size
750
68
51225
... More
Supply at site good quality pots Mosaic pots of 15'' size
125
134
16770
... More
Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on approprite place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid seperately.) Size of Empty Pots 25cm Top dia, 15cm Bottom Dia & 25cm Perpendicular height.
875
17
15356.25
... More
Supplying of various varieties of seeds of seasonal flowers & vegetables. Seeds of flower (Hybrid)
300
42
12807
... More
Supplying of various varieties of seeds of seasonal flowers & vegetables. Seeds of flower (Ordinary)
300
7
2286
... More
Supply of good quality of vegetable seeds (Hybrid)
300
36
10977
... More
Planting different varieties of sampling plants including making earth pits, mixing of earth & manure (Cost of earth & manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. on ground
11250
2
31725
... More
Planting different varieties of sampling plants including making earth pits, mixing of earth & manure (Cost of earth & manure shall be paid separately) etc. all complete with tools & plants as per instruction of EIC. in pots
3750
3
13237.5
... More
Painting of flower pots as per instructions of EIC. Earthern pots of 12'' size with colour/ terracotta.
5000
2
10950
... More
Painting of flower pots as per instructions of EIC. Mosaic pots of 15'' size with enamel paint of approved brand.
1250
7
9687.5
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Urea
325
10
3354
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. DAP
175
27
4879
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Bone Meal
75
58
4355.25
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Melathian
8
777
6216.32
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Rogar 30%
5
782
3914.25
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Neem Cake
55
63
3513.4
... More
Supply of fertilizers/ Insecticides/ Fungicides/ Pesticides etc. Rose Misture
12
80
961.68
... More
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.
5000
47
239750
... More
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge.
500
82
41400
... More
Supply of Satna lime
5
405
2026.2
... More
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).
60
14
861
... More
Fine dressing of the ground.
60
2
174
... More
Providing and Displaying of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.
500
20
10000
... More
Supply and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Varigata, Glabra Formosa, Peruviana Odissi, Partha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) plant of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
50
40
2000
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable
material’s as per direction of officer in charge (excluding cast of plant & water ) Cost of plantation per Shrubs plants.
50
2
142.5
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unsaverieable
material’s as per direction of officer in charge (excluding cast of plant & water ) Cost of plantation per Hedge plants.
500
1
950
... More
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
62
209
12998.3
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, hedge, flower beds, foliages, creepers etc. including hoeing, weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide , lawn mover and brush cutter with fuel will be provided by the Department & other T & P material/articles shall be provided by the contractor.) and as per direction of officer in charge. Play grounds / Public parks.
1530
1
2830.5
... More
Part B
-
-
-
... More
wiring for light point/fan point exhaust fan pint/ call bell with 1.5 sqmm. FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with piano type, phenolic laminated sheet, suitable size M.S. box and earthing piont with 1.5 sqmm FRLS PVC insulated copper conductor single core cable etc.as required. Group-A
125
608
76021.25
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 1.5 sq. mm Copper wire
1000
36
36270
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 2.5 sq. mm Copper wire
875
48
42516.25
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 4.0 sq. mm Copper wire
750
75
56512.5
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 x 6.0 sq. mm Copper wire
625
107
66893.75
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 5/6 A Switch piano type
1000
39
39810
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 5 pin 5/6 A socket outlet piano type
1000
50
50500
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 15/16 A Switch piano type
625
96
60412.5
... More
Supplying and fixing following Flush / piano type switch/ socket on the existing switch box/ cover including connections etc. as required. ISI Marked. 6 pin 15/16 A socket outlet piano type
625
111
69993.75
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 5/6 A Switch modular
50
85
4266.5
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 5 pin 5/6 A socket outlet modular
50
97
4865.5
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 15/16 A Switch modular
50
131
6585
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. ISI Marked. 6 pin 15/16 A socket outlet modular
50
153
7661.5
... More
supplying and fixing two module stepped/piano Socket type electronic fan regulater on the existing modular plate switch box incluiding connections but excluding modular palte etc. as required. ISI Marked. 2 module Socket Type Electronic fan regulater.
375
299
112402.5
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. ISI Marked.
250
56
14147.5
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
500
79
39525
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) ISI Marked. 8 way , Double door
8
1543
12344.64
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. Single pole 32A
1125
174
196728.75
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. Double pole 40 A
250
296
74207.5
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. Double pole 63 A
100
340
34088
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. 40 A rating, 2 pole RCCB, 30 mA
300
1837
551142
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. ISI Marked. 63 A rating, 2 pole RCCB, 30 mA
75
2314
173588.25
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. ISI Marked. 250mm pvc Conduit
625
79
49537.5
... More
Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required. ISI Marked.
100
18
1831
... More
Complete overhauling, greasing of ceiling fan
375
70
26250
... More
Complete rewinding of ceiling fan (dismantling, assembly and commissioning of the same) including material.
138
250
34500
... More
Complete rewinding of exhaust fan (dismantling, assembly and commissioning of the same) including material
125
450
56250
... More
Power supply maintenance work of Permanent township round the clock by engaging 01 nos. supervisors, 09 nos. Electricians and 09 nos. Electrical helpers per day basis (inclusive of Contractor profit & tools tackle
180
14426
2596734
... More
Supply of materials and main to submain wiring with 4.0 sq.mm PVC insulated insheathed 1100 V grade copper wire and laying the same in suitable size of PVC conduit / casing capping with inspection boxes etc. complete in all respect as per site requirement and direction of EIC. 1.5 sq.mm copper wire shall be sued as earthling wire. All materials should be as per IS specification
100
104
10400
... More
Supply & fixing of one way PVC MCB box with suitable size of teak wood / MS board with Bakelite sheet on top includingconnection work etc. completein all respect as per site requirement (MCB shall be supplied by deptt & all others materials should be as per IS specification)
100
40
4000
... More
Supply and fixing of four way PVC MCB bos with suitable size of teak wood board with arkalite sheet on top includingconnection work etc. complete in all respect as per site requirement (MCB shall be supplied by deptt. & all others materials should be as per IS specification)
100
42
4270
... More
Supply & fixing of wooden board size of 8”x10”x2" with sunmica top including fixing of the old/new switches & socket (switch & socket shall be supplied by the deptt
150
60
9000
... More
Supply and fixing of wooden board size of 8”x6”x2" with sunimica top including fixing of the old / new switches and socket (switch & socket shall be supplied by the dept
125
54
6750
... More
Supply and fixing of wooden board size of 7”x4”x2" with sunimica top including fixing of the old / new switches and socket (switch & socket shall be supplied by the dept
250
44
11000
... More
Supply and fixing of wooden board size of 4”x4”x2" with sunimica top including fixing of the old / new switches and socket (switch & socket shall be supplied by the dept
500
35
17500
... More
Supply & laying of 2x6 sq.mm PVC insulated PVC sheathed, 1.1 KV grade armoured heavy duty, ISI market twin core aluminium conductor cable with 10 SWG GI wire in open air from pole to internal main switch / external main switch for replacement of service line connection work including fixing / saddling of cable on wall with suitable size of PVC conduit etc. complete with connection work. Note – Old / burnt service connection wire/cable to deposited at site store & all others materials should be as per IS specition
750
71
53250
... More
Supply & laying of 2x10 sq.mm PVC insulated PVC sheathed, 1.1KV grade unarmoured heavy duty ISI market twin core aluminium conductor cable with 10SWG GI wire in open air from pole to internal main switch / external / main switch for replacement of service line connection work including fixing/saddling of cable on wall with suitable size of PVC conduit etc. complete with connection work. Note: Old / burnt service connection wire / cable to deposited at site store & all others materials should be as per IS specition
1000
82
82000
... More
Installation of 1x20/40watt fluorescent / LED tube light fitting on wall / ceiling including all required materials and connection to same etc. complete in all respect & all others materials should be as per IS specition
1750
49
85750
... More
Dressing of old / damaged wiring with casing-capping/PVC conduit & others required materials like screw, PVC gully ditofix, saddle etc complete in all respec
1125
22
24750
... More
Dressing of old / damaged wiring without casing-capping/PVC conduit & others required materials like screw, PVC gully ditofix, saddle etc complete in all respec
625
16
10000
... More
Handing of ceiling fan (old/new) including all accessories with connection work etc. complete in all respect
625
55
34375
... More
Power supply maintenance work of Temporary township round the clock by engaging 01 nos. supervisors, 03 nos. Electricians and 03 nos. Electrical helpers per day basis (inclusive of Contractor profit & tools tackles
180
5442
979606.8
... More
Facility Manager
180
807
145303.2
... More
Assistant Facility Manager: 5 nos. (Civil - 04 nos., Electrical - 01nos.)
180
3350
603171
... More
Total impact of GST for the purpose of CTC
1
8150023
8150023.54
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%