MP Laghu Udyog Nigam Limited Tender

MID BACK CHAIR : The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-46 cm, (H)-55 cm & size of seat shall be (W)-48 cm x (D)-44.0cm. Armrest is fixed . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 95 to max 104 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA X7.1standards

ROLLER BLINDS:- Providing and fixing of roller blinds of washable fabric duly fixed with powder coated channel and clamps having nylon code for operation of approved color etc. complete in all respect as per direction given by Engineer in charge. (Vista / NBT /MAC/ WINDOW TECH )

Providing and fixing of storage units (laminate finish) (450 mm wide) - Providing and fixing at site file / storage cabinet made up of 18MM BWP ply with 1mm thick laminate as per drawing. All shelves and partitions to be made up of 18MM BWP ply and Pallah to be made up of 12mm. thick BWP ply fixed with hinges of approved make. All exposed edges to be finished with 1st quality teak wood beading to be melamine polished / PU coating and all inside surfaces to be finished with 1.00mm laminate. The cost is inclusive of all materials accessories, SS handles, lock, labour, etc. complete in all respect as per drawing and direction given by Engineer in charge.