MP Laghu Udyog Nigam Limited Tender

Providing and fixng of decorative partition stracture of 19.00 mm thick ,1.00 mm thick laminate ,8.00 mm thick glass with bebling complete finish including hardware .

Providing and fixing of Rubber wood skirting capping size 75.00 mm x 12.00 mm including polishing complete hardware

Providing and fixing of Rubber wood skirting capping size 90.00 mm x 12.00 mm including polishing complete hardware

Providing and fixing of visitor chair as per Desing

Providing and fixing of low back revolving chair as per Desing

Providing and fixng of two seater sofa with arms fully coverd stracture of 19.00 mm thick block board ,and back side 12.00 mm thcik commercial ply .100.000 mm thcik coushion ,foam 40.00 mm thick 32hd ,ancluding tapesty @ rate 350.00/- meater complete finish

Providing and fixng of roller blind complete finish including hardware

Providing and fixing of LED TV 42'' cu 8000 make of samsung /l.g. ( One year Warnti )

Providing and fixing of 18.00 mm thick commercial ply complete hardware

HIGH BACK CHAIR Providing and Fixing- Type of locking 3-Position Locking, Number of arm movement- 2 (Up and Down), Pedestal Base-Chrome plated MS, Armrest Material- Polypropylene, Seat material-Pressed and moulded with PU foam, Backrest is made of- One piece injection moulded frame, Density of PU foam used in seat KG per Cu Meter (± 3)-35, Density of PU foam used in backrest in KG per Cu Meter (±3)-N.A, Backrest upholstered wit-Mesh Fabric, Seat upholstered with-100% polyester fabric, GSM/Thickness of fabric ±5%(Gram/Square meter)- 220 gram, Overall width (±10 mm)-650 mm, Backrest Height ±15 mm-800 mm, Backrest Width ±10 mm- 480 mm, Seat Height ±10 mm- 525 mm, Seat Width ±10 mm- 480 mm, Seat Depth ±10 mm- 480 mm, Thickness of MS Plate Joining the under structure with Seat- 1 mm, Thickness of Plywood used in Seat ±1(mm)- 12 mm, Thickness of Plywood used in Backrest ± 1(mm)- N.A, Pedestal Size (Diameter in mm) ±10 mm- 650 mm, Thickness of Polyurethane Foam Used in Seat in mm (±2 mm)- 40 mm, Thickness of Polyurethane Foam Used in Backrest in mm((±2 mm)- N.A

VISITOR CHAIR Chair Type- Providing and Fixing Non-Revolving and Non-Tilting chair with Armrest, Chair frame type- Cantilever, Armrest type- Moulded armrest continuously fitted with seat bottom to backrest, Seat type- Padded, Backrest type- Padded, Frame Material Configuration- One piece, Frame material- Aluminium pipe (hollow Section) conforming to Designation HV20 WP of IS: 1285 (with latest Amendment), Seat material- Single piece of Cold Reduced Carbon Steel Sheet Confmg. to grade CR0 of IS:513 Part 1 (with Latest amendment), Seat material thickness- 40 mm, Density of Polyurethane foam used in seat (±2 Kg/Cub Meter)- 45, Seat- Fabric, GSM of seat cover (± 3 GSM)- upholstered with 80 GSM, Backrest material- Moulded Plywood, Density of Polyurethane foam used in Backrest ( ±2 Kg/Cub Meter)- 40, Backrest upholstered with- Fabric- 450 mm, Seat Width (± 5 mm)- 500 mm, Seat height from floor surface (± 5 mm)- 525 mm, Backrest width (± 5 mm)- 370 mm, Backrest height from seat (± 5 mm)- 340 mm, Paint Type- Anti-Corrosive Paint, Polish Type- Wax Polish, Colour of Paint- Black, Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove the conformity of product to the Specification- No, Test reports to be furnished to buyer on demand- Yes

Providing and fixing of video and audio conferencing system make Ahuja/ aro/ philifs ( One year Warnti ) The Bidder Shall quote his own rates for Item rates as BOQ1 item no. 1 to 15