Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date4 Sep 2024
Closing Date30 Sep 2024
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671556_1Bid Award Id
ViewTender No
8303/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in floor, finished even and rough to receive floor finishes complete all as specified and directed.
175
-
-
M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in bed blocks, lintels, cills, steps, seismic and other similar bands, kerbs, coping, benching and like etc including necessary form work complete all as specified and directed.
2.25
-
-
M&L for vitrified ceramic coloured dark shade 8-10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm as in floors over and including 15 mm thick screed bed in CM 1:6 etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.
200
-
-
M&L for vitrified ceramic coloured dark shade 8-10mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 Sqm on vertical surfaces such as skirting, dado and risers to steps etc; over and including 10 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
25
-
-
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors over and including 15mm thick screed in CM 1:6 etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as specified and directed.
175
-
-
M&L for coloured glazed ceramic tiles of size 450 x 300 x 7mm thick on vertical surface such as dados, skirtings and risers over and including 10 mm thick rendering even and rough in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
185
-
-
Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed.
580
-
-
Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
5.5
-
-
M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.
5
-
-
M&L for brick work with fly ash bricks (modular size bricks) straight or curved on plan any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.
5
-
-
M&L for 15 mm thick rendering on brick or concrete surface of walls in CM 1:6, finishing the surfaces fair and even without using extra cement complete all as specified and directed.
40
-
-
M&L for 10 mm thick rendering on brick or concrete surface of ceiling in CM 1:4, finishing the surfaces fair and even without using extra cement complete all as specified and directed.
40
-
-
M&L for 15 mm thick rendering on brick or concrete surface of walls in CM 1:4, finishing the surfaces fair and even without using extra cement complete all as specified and directed.
500
-
-
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over and including 1 mm thick coat of putty, finished even and smooth complete all as specified and as directed.
40
-
-
M&L for preparation of newly plastered surfaces of walls and applying premium acrylic smooth exterior paint with silicone additives of required shade with two or more coats, applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.
500
-
-
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of oil bound distemper over and including 1 mm thick coat of putty, finished even and smooth complete all as specified and as directed.
40
-
-
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc; laid bedded and pointed in any mortar complete all as specified and directed.
12.9
-
-
M&L for granite stone work (any type) of 18 to 20 mm thickness (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and incluidng 15mm thick screed bed in CM 1:4 complete all as specified and directed.
14
-
-
Taking up or down 15 mm bore GI steel tubing of any description complete all as specified and directed.
80
-
-
S&F 15 mm GI tubing, medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
80
-
-
Taking up or down 20 mm bore GI steel tubing of any description complete all as specified and directed.
40
-
-
S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
40
-
-
S&F in replacement sink made of stainless steel 1 mm thick, kitchen or laborary with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm including stainless steel waste coupling and PVC waste pipe complete all as specified and directed.
6
-
-
S&F in replacement stainless steel 1 mm thick, utencil kitchen rack of overall size 600 x 720 x 200 mm of approved design and fixed with plugs, washers and screws to walls complete all as specified and directed.
11
-
-
S&F in repairs vitreous china wash basin, white flat back size 550 x 400mm with and including 32mm size stainless steel waste coupling, PVC waste pipe and brackets and fixed in position complete all as specified and directed.
8
-
-
S&F in repairs WHB oval type under counter of approved quality and fixed with existing granite stone counter with and including 32mm size stainless steel waste coupling, PVC waste pipe and fixed in position complete all as specified and directed.
6
-
-
S&F in repairs 15 mm bore pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
25
-
-
S&F in repairs 15 mm bore bib taps standard of PTMT any colour screwed (Minimum weight 15mm 90 gms) and fixed to iron pipe complete all as specified and directed.
80
-
-
S&F in repairs 15 mm bore bib taps, cast copper alloy, fancy type, chromium plated with capstan head, screwed down, screwed for iron pipe and fixed complete all as specified and directed.
125
-
-
S&F in repairs 15 mm bore stop cock (angle valve), cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
45
-
-
S&F in repairs 15 mm bore two way stop cock (angle valve), cast copper alloy, fancy typre, chromium plated with capstan head, screwed down, high pressure, screwed for iron pipe or union and fixed complete all as specified and directed.
15
-
-
S&F in repairs 15 mm bore stop cock (concealed type), cast copper alloy, chromium plated with long shank and cut, with capstan head, screwed down for iron pipe or union and fixed complete all as specified and directed.
30
-
-
S&F in repairs wall mixer for mixing hot and cold water of brass, chromium plated with capstan head, screwed down for 15 mm bore iron pipe or union and fixed complete all as specified and directed.
5
-
-
S&F in repair brass CP centre hole basin mixer for mixing hot and cold water with capstan heads, screwed down for 15 mm bore iron pipe or union and fixed complete all as specified and directed.
5
-
-
S&F in repairs brass chromium plated shower rose 125 mm in size, with or without swivel joints, any type and fixing to steel pipe or union complete all as specified and directed.
45
-
-
S&F in repairs waste coupling 32 mm of suitable size for wash basins of PTMT (half or full threaded) and fixed complete all as specified and directed.
65
-
-
S&F in repairs 40mm bore PVC waste pipe for kitchen sink, one mtr long complete all as specified and directed.
55
-
-
S&F in repairs 32mm bore PVC waste pipe for wash basins, one mtr long complete all as specified and directed.
100
-
-
S&F in repairs 100mm dia stainless steel grating (Minimum weight 25 gms) and fixed complete all as specified and directed.
75
-
-
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
100
-
-
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
65
-
-
S&F in repairs vitreous china squatting pan "Orissa" pattern size 580x440 mm white, with integral foot rest (exculding flushing cistern and flush pipe) with and including cement concrete bedding complete all as specified and directed.
15
-
-
S&F in repairs vitreous china wash down water closed pan (pedestal pattern), white (excluding flushing cistern and flush pipe) with and including plastic seat cover complete all as specified and directed.
6
-
-
S&F in repairs plastic water closet seat cover (colour white), closed pattern with flat bottom and cover with mild steel chromium plated or aluminised hinging device complete all as specified and directed.
20
-
-
S&F in repairs PVC low level flushing cistern 10 ltrs capacity with all internal fittings including 32mm dia flush pipe and fixing to supply pipe also including 15 mm bore, 600mm long PVC connection with brass heads & washers and connecting to WC complete all as specified and directed.
30
-
-
S&F in repairs PVC (SWR) floor trap, 75 mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.
25
-
-
S&F in repairs PVC (SWR) gully trap 125/110 mm bore, setting and jointing with solvent
cement complete all as specified and directed.
25
-
-
S&F in repairs 110 mm bore PVC (SWR) 'P’ trap for water closet and jointing to outlet pipe with solvent cement complete all as specified and directed.
25
-
-
S&F in repairs shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (Minimum weight 300gms) complete all as specified and directed.
15
-
-
Dismantling of PCC of any type and in position from sunken floor complete all as specified and directed.
2.5
-
-
M&L for plain cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in filling as required in sunken floor complete all as specified and directed.
2.5
-
-
M&L for brushing neat cement slurry @ 3.0 kg of cement per sqm to wall/ floor/ roof complete all as specified and directed.
125
-
-
Supply only integral water proofing compound (ISI marked) complete all as specified and directed.
10
-
-
S&F in repairs 20mm dia drapery/curtain rods, fancy type, chromium plated with and including fixing brackets, stops etc complete all as specified and directed.
255
-
-
S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing, 60 cm long complete and fixed with screws to wall complete all as specified and directed.
15
-
-
S&F in repairs 600 x 450 mm size bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
45
-
-
S&F of brass mortice lock, vertical type, size 100 mm, 4 levers with keys complete all as specified and directed.
15
-
-
S&F of brass locks for drawer/cupboard, grade- I, size 75 mm, 4 levers with keys complete all as specified and directed.
25
-
-
Taking down rain water pipes (any size or pattern) incl all fittings, heads, shoes, bends, swan necks, etc, complete all as specified and directed.
230
-
-
S&F of PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints laid in trenches, floors or fixed in walls complete all as specified and directed.
155
-
-
S&F of PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints laid in trenches, floors or fixed in walls complete all as specified and directed.
75
-
-
S&F in repairs CP Jet spray with holder on EWC complete all as specified and directed.
20
-
-
S&F in repairs health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections complete all as specified and as directed.
15
-
-
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges and fixed with screws complete all as specified and directed.
55
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of area exc 1.5 sqm and not exc 4.0 Sqm each complete all as specified and directed.
40
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of area not exc 1.5 Sqm each complete all as specified and directed.
33
-
-
S&F of solid PVC door frame of size 50 x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per manufacturer instructions complete all as specified and directed.
94
-
-
S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR-2004 Part - II and directed.
28
-
-
S&F for IInd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed complete all as specified and directed.
0.4
-
-
S&F of 105x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified made out of 1.25mm thick MS sheet complete all as specified and directed.
25
-
-
S&F of 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc complete as specified made out of 1.25mm thick MS sheet complete all as specified and directed.
30
-
-
S&F of factory made 40 mm thick flush door shutters, solid core construction with block board core and plywood face panel, commercial type on one face, other face covered wih decorative face veneers with lipping/frame to match complete all as specified and directed.
25
-
-
S&F of 35mm thick second class hard wood glazed and skeleton door shutter, open rebated and prepared to receive glass or gauge etc; divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and directed. Note: Size of member of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.
20
-
-
Taking down shutter of any description of area not exc 1.0 Sqm each complete all as specified and directed.
40
-
-
Taking down shutter of any description of area exc 1 sqm and n.exc 2.0 sqm each complete all as specified and directed.
30
-
-
S&F of steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete including lugs with glazing bars, dovetailed or welded complete all as specified and directed.
15
-
-
S&F for powder coated sliding aluminium three track windows/ ventilator shutters (01 No wire mesh, 02 No glass shutters), comprises of aluminium sections including 4 mm thick glass and SS wire mesh, fixed to aluminium frame with necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary accessories handle, locking system etc. and the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent of approved quality complete all as specified and directed.
30
-
-
S&F in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber framework complete all as specified and directed.
125
-
-
S&F in repairs of IInd class hard wood, plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads of cross sectional area exc 13 sq cm and not exc 25 sq cm complete all as specified and directed.
120
-
-
S&F of continuous (piano) hinges of 30 mm flap size, mild steel, chromium plated, bright finish or electro galvanised and fixed with screws complete all as specified and directed.
95
-
-
S&F of 12mm thick lipping for external teak wood on veneered particle board or block board and fixed with nails complete all as specified and directed.
90
-
-
S&F of 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed to frame complete all as specified and directed
135
-
-
S&F of 150 mm long aluminium handles, cast type, anodised and fixed to door complete all as specified and directed
90
-
-
S&F of 150 mm long aluminium anodised barrel tower bolts, extruded section and fixed to door complete all as specified and directed.
90
-
-
S&F of 250 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
45
-
-
S&F in repairs 100mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed
150
-
-
S&F in repairs 40mm dia cupboard/kitchen brass cabinet knobs and fixed with screw and washer complete all as specified and directed.
75
-
-
S&F in repairs 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.
125
-
-
S&F in repairs 150 mm long aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and directed.
125
-
-
S&F in repairs 250 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
35
-
-
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
75
-
-
S&F of galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperure 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
15
-
-
Hacking out old glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.
60
-
-
S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.
50
-
-
S&F of 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
10
-
-
M&L for securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified and directed. Note: New length of frame re-puttied shall only be measured.
135
-
-
S&F in repairs for hydraulic soft close auto hinges, thickness 1-1.5 mm, size 8 Inch brass finish 90 Degree opening angle silver colour complete all as specified and directed.
34
-
-
S&F in repairs 12 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and directed.
40
-
-
S&F of decorative laminate 0.9 mm thick, type 1 of surface finish, colour and pattern as approved incluidng fixing with approved adhesive complete all as specified and directed.
45
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
6.1
-
-
M&L for mild steel framed work such as grills, gratings, gate etc; with ends of bars & plates souldered and/or riveted or forged into spikes, framed guard bars, barred iron doors ladders framed balusters walkways, railing, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
250
-
-
M&L for running welding in repairs, thickness of metal to be welded not exc 6mm thick in position complete all as specified and directed.
20
-
-
M&L for preparation of old plastered surfaces of walls and applying one coats of oil bound distemper complete all as specified and directed.
6500
-
-
M&L for complete removal of existing treatment on wall surfaces with and including applying two coats oil bound distemper over 1.5mm thick coat of cement based white putty, finished even and smooth complete all as specified and directed.
750
-
-
M&L for preparation of old or previously not treated surfaces of ceilings and applying two coats of oil bound distemper over 1.5mm thick coat of cement based white putty, finished even and smooth complete all as specified and as directed.
165
-
-
Taking down existing water proofing treatment of any description including PCC padding, cement plaster any thickness from roof surfaces, cleaning roof iwth water and prepairing it for further treatment and removing rubbish from site complete all as specified and directed.
125
-
-
M&L for providing water proofing treatment to RCC roof with APP modified membrane with non woven polyster reinforced weight not less than 3 Kg/Sqm and thickness not less than 3 mm having thermal insulation with white plain or aluminium colour coating on upper side of membrane uniformly embedded during manufacturing process complete comprising of following stages:-
125
-
-
(a) Applying 10 mm thick plaster in CM 1:4 mixed with and incl water proofing compound @ 3% by weight of cement. After the plaster is cured the roof will be tested for water tightening by ponding with water for seven days for any seepage / leakages etc. if any seepage is oberved the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. Again repaired surface of slab will be tested for water tightness aginst before processing further treatments.
-
-
-
(b) The surface of the roof, parapet and gutters, drain mouths etc. over which water proofing treatment is to be applied shall be cleaned from all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grove shall be cut around to tuck in the treatment as pipes, chimney stacs etc. and other similar situations to ease up about corners.
-
-
-
(c) Applying bituminous primer conforming to IS : 3384-1965 @ 0.30 Kg/Sqm to be applied on prepared surface till the surface is properly impregnated.
-
-
-
(d) Applying two coats of paving bitumen, 85/25 grade to roof surfaces @ 1.5 Kg/Sqm per coat.
-
-
-
(e) Applying APP modified water proofing membrene as specified on the primed surface by torch application method as per manufacturers instructions, the overlaps while torching shall be 100 mm in both directions (longititudinal and transverse directions). All overlaps joints shall be sealed thoroughly by thermofusing both the membrene layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.
-
-
-
(f) All joints and turns should be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane.
-
-
-
(g) Fillets of PCC (1:2:4) type B-0 of 100 x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. Membrane should not be taken over at any steep turns and hence all corners /junctions should be rounded.
-
-
-
M&L for applying two coats of exterior weather proof paint of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, water, alkali & fungal resistance, dirt resistance of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and 1.5mm thick coat of water based white putty including taking out/ complete removal of existing treatment complete all as specified and directed. Note : (i) Application of primer & emulsion to be carried out through air less spray machine (Mechanical means) and existing fittings, fixtures shall be cleaned after application. (ii) Guarantee of 5 yrs from the certified date of completion for the effectivness of exterior acrylic emulsion weather coat paint shall be submitted by the contractor.
(iii) Security deposit @ 2.5 % of the amount of treatment shall be deposited by the contractor for the entire guarantee period in the form of FDR in favour of GE.
2000
-
-
M&L for preparation of old or previously treated wood/wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
450
-
-
M&L for preparation of old or previously treated steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed.
350
-
-
M&L for preparation of newly steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
250
-
-
M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed.
45
-
-
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
95
-
-
M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, subbase and mass concrete complete all as specified and directed.
10
-
-
M&L for hardcore of broken stone or boulders of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
5
-
-
M&L for sand cushioning for laying of interlocking paver block complete all as specified and directed.
1.88
-
-
M&L for machine pressed precast concrete interlocking paver block reflective type (glossy finish) any shape and size of 80 mm thickness, M-40 Grade with grey cement and pigments to match with existing complete all as specified and directed.
75
-
-
M&L for machine cut kota stone slab flooring 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of cement mortar 15 mm thick in CM 1:6 complete all as specified and directed.
40
-
-
Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) in any description and in any position not otherwise specifically provided for complete all as specified and directed.
1
-
-
M&L for reinforced cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, chajjas and the like complete all as specified and directed.
1
-
-
S&F of mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
155
-
-
M&L for use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc; vertical or to batter and similar work; rough finished flat complete all as specified and directed.
30
-
-
M&L for cement concrete 1:3:6 type D-2 (using 40 mm graded stone aggregate) as in surface channel and drains complete all as specified and directed.
1
-
-
Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings including ridges complete all as specified and directed.
115
-
-
S&F of pre-painted galvalume aluminum zinc coating GI Based corrugated steel sheeting 0.50mm thick (AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed.
115
-
-
S&F of rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections (Fe 410-W(Gde E-250 quality) complete all as specified and directed.
360
-
-
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes, etc. but not exceeding 10 Sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.
7.25
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and directed.
4
-
-
Removing of surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.
3.25
-
-
Demolition or breaking up of salt glazed ware, AC or reinforced concrete drain pipes of 150 mm dia, jointed in cement mortar incluidng taking out from trenches, if required complete all as specified and directed.
27.5
-
-
M&L for 150 mm dia RCC NP2 drain pipes with collars laid in trenches and jointed in cement mortar 1:3 complete all as specified and directed.
27.5
-
-
M&L for providing concrete bed in PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) to 150 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
25
-
-
M&L for precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cover slab for manholes etc set in CM 1:4 complete all as specified and directed.
0.61
-
-
Taking down carefully copper/aluminium point wiring (light, fan, socket or power complete with fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and making good disturbed surface of walls, floors, etc.complete all as specified and directed.
100
-
-
M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one-way switch, drawn in and including non metallic rigid PVC casing capping heavy duty, ISI marked, not less than 25mm bore with all fitting and fixing accessories including one run of 1.5 sqmm FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade as earth continuity wire connected to common earth dolly by suitable lugs, sunken sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of fittings like switches, sockets, fan regulators, etc. with 3mm thick laminated hylum sheet cover complete all as specified and directed.
20
-
-
All as per item No 137.00 here-in-before but for one light point controlled by two way switch complete.
5
-
-
All as per item No 137.00 here-in-before but for one 3 pin, 5 Amp socket outlet on independent board complete.
5
-
-
All as per item No 137.00 here-in-before but for one 3 pin, 5 Amps socket outlet point controlled by one switch on same board with other switches complete.
4
-
-
All as per item No 137.00 here-in-before but wiring with 2.5 Sqmm copper cable for 5/15 Amp switch socket combination for 3 pin socket out let 15 Amp independent board and provision of 2.5 Sqmm, FRLS PVC insulated unsheathed multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.
5
-
-
All as per item No 137.00 here-in-before but wiring with 4 Sq mm copper cable for 15 Amp switch socket combination for 3 pin socket out let 15 Amp independent board and provision of 4 Sqmm, FRLS PVC insulated unsheathed multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.
5
-
-
M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one-way switch, drawn in and including non metallic rigid PVC conduit, concealed (ISI marked) medium grade not less than 20mm diameter with all conduit accessories in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 (except on ceiling, on ceiling surface casing capping will be used in lieu of concealed PVC conduit) including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly, sunk sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of fittings like switches, sockets, fan regulators etc. with 3mm thick laminated hylum sheet cover complete all as specified and directed.
30
-
-
All as per item No 143.00 here-in-before but for one light point controlled by two way switch complete.
5
-
-
All as per item No 143.00 here-in-before but for one 3 pin, 5 Amp socket outlet on independent board complete.
5
-
-
All as per item No 143.00 here-in-before but for one 3 pin, 5 Amps socket outlet point controlled by one switch on same board with other switches complete.
5
-
-
All as per item No 143.00 here-in-before but wiring with 2.5 Sqmm copper cable for 5/15 Amp switch socket combination for 3 pin socket out let 15 Amp independent board and provision of 2.5 Sqmm, FRLS PVC insulated unsheathed multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.
6
-
-
All as per item No 143.00 here-in-before but wiring with 4 Sq mm copper cable for 15 Amp switch socket combination for 3 pin socket out let 15 Amp independent board and provision of 4 Sqmm, FRLS PVC insulated unsheathed multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete.
5
-
-
Taking down old/unserviceable switch piano/socket outlet /bell push /S-S combination/ceiling rose /bell ding dong /buzzer electric/old unserviceable tube lights fitting/mirror light fittings of any type complete all as specified and directed.
570
-
-
S&F of switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and directed.
40
-
-
S&F of switch piano, flush type, single pole, two way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and directed.
40
-
-
S&F of bell push, flush type, 6 Amps, piano type, 240 volt, 50Hz, AC, ISI marked complete all as specified and directed.
20
-
-
S&F of switch piano, one way, single pole, 15 Amps, 240 volt, 50Hz, flush type, ISI marked complete all as specified and directed.
30
-
-
S&F of socket outlet multipurpose having provision for 2 & 3 pin, 6 Amps, flush type, 240 volt AC complete all as specified and directed.
20
-
-
S&F of socket outlet 2 in 1, 3 pin 5 and 15 Amps, flush type, 240 volt AC complete all as specified and directed.
25
-
-
S&F of switch socket combination, 2 in 1 type, 5/6 Amps, flush type, 230 volt AC complete all as specified and directed.
30
-
-
S&F of switch socket combination outlet multipurpose having provision for 5 pin, 5/15 Amp, 230 volt AC complete all as specified and directed.
20
-
-
S&F of ceiling rose, surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and directed.
50
-
-
S&F of buzzer electric, single phase, 240 volt, AC complete all as specified and directed.
10
-
-
S&F of bell, Ding Dong type, electric, single phase, 240 volt, AC complete all as specified and directed.
20
-
-
S&F in repairs LED tube light fitting, surface mounted lumanaires, 1 x 20 W, 240 V, decorative ultra slim round /squar profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps, connector block, etc. complete with all accessories internally pre-wired and including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.
250
-
-
S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size completeb all as specified and directed.
15
-
-
Taking down old unserviceable ceiling fan regulator/modular swich/ modular socket/modular ceiling fan regulator/ metal boxes/ cover plate of any type and size complete all as specified and directed.
195
-
-
S&F of ceiling fan regulator electronic step type 240 V, AC 50 Hz single pole, 100 watts flush type complete all as specified and directed.
40
-
-
S&F of modular socket outlet 2-in-1, 5 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.
20
-
-
S&F of modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, AC complete all as specified and directed.
15
-
-
S&F of modular switch socket combination 2-in-1, 5 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.
15
-
-
S&F of modular switch socket combination, multipurpose, 6 pin, 5/16 Amp, 3 module complete all as specified and directed.
15
-
-
S&F of modular fan regulator, 5 step, high speed, 240 volts complete all as specified and directed.
15
-
-
S&F of modular switch, one way, 6 Amp, one module, 240 volts complete all as specified and directed.
15
-
-
S&F of modular metal flush box of 6 module complete all as specified and directed.
10
-
-
S&F of modular metal flush box of 4 module complete all as specified and directed.
10
-
-
S&F of modular metal flush box of 3 module complete all as specified and directed.
10
-
-
S&F of modular white cover plate of 6 module complete all as specified and directed.
10
-
-
S&F of modular white cover plate of 4 module complete all as specified and directed.
10
-
-
S&F of modular white cover plate of 3 module complete all as specified and directed.
10
-
-
Taking down old ceiling fan/exhaust fans/wall mounted fan of any capacity/sweep after disconnecting the electric supply from any site, checking for its electrical defect and opening fans for checking of mechanical defect after dismantling fan, carried out repair/ over hauling including removing dust, grease and cleaning of internal mechanical parts of fan with kerosene oil, checking of alignment of shaft, oiling and greasing, checking of worn out bearing and other defective parts, winding, condenser etc and re-assembling and connecting/ refixing of fans in its original position by providing new nuts, bolts, lock washers and lock/split pin complete all as specified and directed. Note: (i) Rewinding and replacement of defective parts, painting etc shall be measured and paid seperately.
(ii) Burnt out fan shall be kept separately and to be repaired/rewinded at AGE E/M yard and to be hanged in existing position after rewinding. (iii) Old ceiling fan will be deposited to MES Store.
50
-
-
Supply only of Bearing No 6201 complete all as specified and directed.
15
-
-
Supply only of Bearing No 6202 complete all as specified and directed.
15
-
-
Supply only of Bearing No 6203 complete all as specified and directed.
20
-
-
Supply only of Bearing No 6204 complete all as specified and directed.
20
-
-
Supply only of Rubber bush as required at site suitable for ceiling fan complete all as specified and directed.
30
-
-
Supply only of Condenser 2.5 mfd complete all as specified and directed.
15
-
-
Supply only of Condenser 4.0 mfd complete all as specified and directed.
15
-
-
M&L for rewinding of ceiling fan of sweep 1200 mm any make any model with suitable gauge with copper winding wire (super enamelled) including all insulating material and necessary heat varnishing testing etc. complete all as specified and directed.
40
-
-
M&L for rewinding of ceiling fan of sweep 1400 mm any make any model with suitable gauge with copper winding wire (super enamelled) including all insulating material and necessary heat varnishing testing etc. complete all as specified and directed.
25
-
-
S&F in repairs of steel power coated blade assembly of wall mounted fan of 400 mm sweep complete all as specified and directed.
5
-
-
S&F in repairs 'U' clamp for hanging ceiling fan in ceiling to be fixed with 3" long ancher fasterner (3 Nos) complete all as specified and directed.
10
-
-
S&F in repairs of ceilling fan down rod of size 15mm GI pipe medium grade (ISI marked) length upto 1500 mm including making holes, nuts, bolts, spilit pin, washers etc and making necessary connection complete all as specified and directed.
20
-
-
S&F in replacement of PVC insulated multistranded copper conductor, sheated round cable ISI marked 1.0 Sqmm, 3 core complete all as specified and directed.
50
-
-
M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area drawn in and including rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 20mm external diameter and PVC insulated stranded copper conductor of 2.5 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 4.0 sqmm cable, one run of 2.5 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.
40
-
-
M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area drawn in and including rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 20mm external diameter and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. Note: Two runs of 6.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.
40
-
-
Taking down old unserviceable MCCB/MCB DB of any size and capacity including wooden boards complete all as specified and directed.
20
-
-
S&F of sheet metal enclosure for MCB, DB, TPN (triple pole and neutral), 415 Volts, 200 Amps rated busbar, 4 way, double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and directed.
3
-
-
S&F of factory made epoxy powder coated distribution board, TPN, 4 way (VTPN MCCB DB) with space for MCCB as incomer, with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated neutral bar, insulated busbar assembly, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts complete all as specified and directed.
2
-
-
S&F of sheet metal enclosure for MCB, DB, SPN (single pole and neutral) single door type surface mounted concealed in wall, 8 ways, 240 Volts, IP 43, ISI marked with 200 Amps rated bus bar, dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.
4
-
-
S&F of sheet metal enclosure for MCB, DB, SPN (single pole and neutral) single door type surface mounted concealed in wall, 12 ways, 240 Volts, IP 43, ISI marked with 200 Amps rated bus bar, dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed.
2
-
-
S&F in repairs MCCB, 63 Amps, 3 Pole, breaking capacity 25 KA with complete electrical connections by appropriate size of copper lugs complete all as specified and directed.
2
-
-
S&F in repairs MCCB, 100 Amps, 3 Pole, breaking capacity 25 KA with complete electrical connections by appropriate size of copper lugs complete all as specified and directed.
2
-
-
S&F in repairs MCB, SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 6 to 32 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.
20
-
-
S&F in repairs MCB, SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 40 to 63 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.
20
-
-
S&F in repairs MCB, SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 32 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.
10
-
-
S&F in repairs MCB, SPN, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 40 to 63 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.
10
-
-
S&F in repairs MCB, TPN, 415 volts, 10 KA breaking capacity, 'C' curve, of capacity 40 to 63 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.
6
-
-
S&F in repairs sheet metal earth plug & socket, single pole and neutral with and including 1 no. single pole MCB 20 Amps 240 volts complete all as specified and directed
5
-
-
S&F in repairs 3 pin plug top, AC - 230 V, 15 Amp complete all as specified and directed.
40
-
-
S&F in replacement PVC insulated, PVC sheathed, flexible circular cable 3 core, 2.5 Sqmm stranded copper conductor, AC, 240 V complete all as specified and directed.
50
-
-
S&F in repairs LED ultra slim decorative aluminium casted edge ceiling light, protuded type, ceiling mounted LED 2' x 2' luminaire, 36 watt with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 1 sqmm, three core complete all as specified and directed.
6
-
-
S&F in repairs LED sleek round recess mounting LED ceiling light 1' x 1' decorative type, aluminium casted edge ceiling light, recess mounting LED luminaire 15 watt with all accessories internally pre-wired and including connecting with PVC insulated multistranded copper flexible cable 1 sqmm three core complete all as specified and directed.
5
-
-
S&F in repairs Coral post top lantern fitting 25 Watt (for Gate light), energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution with complete accessories complete all as specified and directed.
4
-
-
S&F in repairs LED tube light fitting, surface mounted luminanaires , 1x9 watt, 240V, decorative ultra slimround/square profile, LED lighting fixture with extruded polycarbonate body, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps, connector block, etc complete with all accessories internally prewired and including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed.
10
-
-
S&F in repairs building security light fitting, 30 Watts, made up of pressure die cast aluminium housing with high efficient LED as lighting source and pc over having top opening separate driver compartment with IP-66 protection and impact resistance of IK-07 including suitable galvanized iron pipe "light grade" bracket, 1 mtr length, bent to shape to obtain required shape including clamps, nuts, bolts, washers etc and making connection with suitable copper wire of size 23/0.0076 complete all as specified and directed.
11
-
-
S&F in replacement flexible wire twin core copper conductor of size 23/0.0076 for ceiling fans, light fittings etc complete all as specified and directed.
100
-
-
Taking down of geyser of any capacity any type from exiting position for descaling, removing its accessories removing the scale (white presipated) deposited in it, cleaning the inner tank properly and re-assembling the same and refixing to its existing location with testing for its proper functioning complete all as specified and directed.
5
-
-
S&F in repairs new heating element of round/triangle for 1.5/2.0 KW, 230 volts to match with the existing system suitable for geyser of 25 Ltrs / 50 Ltrs capacity installed at site complete all as specified and directed.
10
-
-
S&F in repairs new thermostat with setting range 30 C to 80 C suitable for 230 volts AC electric supply to match with the existing system suitable for geyser of 25 Ltrs / 50 Ltrs capacity installed at site complete all as specified and directed.
5
-
-
S&F in repairs new indication lamp (set of two) of any description and in any position suitable for geyser of 25 Ltrs / 50 Ltrs capacity installed at site complete all as specified and directed.
5
-
-
M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of size 32x6 mm galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M-15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and directed.
4
-
-
Taking up or down 15 mm bore GI steel tubing and connections complete all as specified and directed.
63
-
-
Taking up or down 20 mm bore GI steel tubing and connections complete all as specified and directed.
114
-
-
Taking up or down 25 mm bore GI steel tubing and connections complete all as specified and directed.
102
-
-
Refixing of GI tubing medium grade 15 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and directed.
45
-
-
Refixing of GI tubing medium grade 20 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and directed.
90
-
-
Refixing of GI tubing medium grade 25 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors complete all as specified and directed.
90
-
-
S&F 15 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
18
-
-
S&F 20 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
24
-
-
S&F 25 mm GI tube medium grade with all necessary fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
12
-
-
Dismantling water tanks of capacity upto 500 litres complete all as specied and directed
7
-
-
Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres complete all as specied and directed
4
-
-
Dismantling water tank capacity exc 1000 ltrs but nexc 2000 ltrs complete all as specified and directed
4
-
-
S&F of 500 ltrs capacity rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia tank nipple complete all as specified and directed.
7
-
-
S&F of 1000 ltrs capacity rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia tank nipple complete all as specified and directed.
4
-
-
S&F of 2000 ltrs capacity rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including 20mm dia tank nipple complete all as specified and directed.
4
-
-
S&F in repairs 25 mm bore PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball, screwed for iron pipe and fixed with fittings such as (socket, nipple, union) complete all as specified and directed.
20
-
-
S&F in repairs 20 mm bore PVC float valve high pressure of PTMT with epoxy coated luminium rod & hight density plastic ball, screwed for iron pipe and fixed with fittings such as (socket, nipple, union) complete all as specified and directed.
175
-
-
S&F in repairs 15 mm bore PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball, screwed for iron pipe and fixed with fittings such as (socket, nipple, union) complete all as specified and directed.
10
-
-
S&F in repairs brass 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for iron pipe or for unions and fixed complete all as specified and directed.
5
-
-
S&F in repairs brass 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for iron pipe or for unions and fixed complete all as specified and directed.
10
-
-
S&F in repairs brass 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for iron pipe or for unions and fixed complete all as specified and directed.
4
-
-
S&F in repairs PVC tank lid (Cover) suitable for tank of 500 Ltr capacity as per existing with locking arrangement with pad lock if required of size 50 mm (steel) complete all as specified and directed.
20
-
-
S&F in repairs PVC tank lid (Cover) suitable for tank of 1000 Ltr capacity as per existing with locking arrangement with pad lock if required of size 50 mm (steel) complete all as specified and directed.
10
-
-
S&F in repairs PVC tank lid (Cover) suitable for tank of 2000 Ltr capacity as per existing with locking arrangement with pad lock if required of size 50 mm (steel) complete all as specified and directed.
5
-
-
M&L for cleaning and degermination inside of RCC/PVC water storage tanks capacity not exceeding 500 Ltrs of any description and in any position comprising of cleaning and sterilization of water tanks through bacteriological treatment by using Trebac G5/Inchlor-5/NB-10, Terbac G65/Inoxi-60/NB-69 and ultra violet rays complete all as specified and directed.
416
-
-
M&L for cleaning and degermination inside of RCC/PVC water storage tanks capacity exc 500 ltrs and not exceeding 1000 Ltrs of any description and in any position comprising of cleaning and sterilization of water tanks through bacteriological treatment by using Trebac G5/Inchlor-5/NB-10, Terbac G65/Inoxi-60/NB-69 and ultra violet rays complete all as specified and directed.
60
-
-
M&L for cleaning and degermination inside of RCC/PVC water storage tanks capacity exc 1000 ltrs and not exceeding 2000 Ltrs of any description and in any position comprising of cleaning and sterilization of water tanks through bacteriological treatment by using Trebac G5/Inchlor-5/NB-10, Terbac G65/Inoxi-60/NB-69 and ultra violet rays complete all as specified and directed.
5
-
-
Deduct Schedule of credit (calculation will be done off line) Rs. 73528.00
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements