Military Engineer Services Tender

One three pin 5 Amps socket outlet point controlled by one No one way switch on same board

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One bell / buzzer point controlled by one bell push

All as per item No 2 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board.

M&L in repair for submain wiring with approved colour coding as per IS in replacement with 2 runs of 4 Sqmm size main cable and one run of 2.5 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FR cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked drawn through Concealed heavy duty ISI marked rigid PVC Conduit of size 25mm dia with all fittings accessories including making good the surface on wall etc complete.(Note- 2 run of 4 sq mm and one run of 2.5 sq mm and one run of heavy duty PVC Conduit will be measured as one unit )

M&L in repair for submain wiring with approved colour coding as per IS in replacement with 2 runs of 1.5 Sqmm size main cable and one run of 1.5 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FR cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked drawn through Concealed heavy duty ISI marked rigid PVC Conduit of size 25mm dia with all fittings accessories including making good the surface on wall etc complete.(Note- 3 run of 1.5 sq mm and one run of heavy duty PVC Conduit will be measured as one unit )

M&L in repair for submain wiring with approved colour coding as per IS in replacement with 4 runs of 6 Sqmm size main cable and two run of 4 Sqmm size earth continuity conductor of single core PVC insulated but unsheathed FR cable of specified size multistranded copper conductor 1100 volts grade IS-694 marked drawn through Concealed heavy duty ISI marked rigid PVC Conduit of size 25mm dia with all fittings accessories including making good the surface on wall etc complete.(Note- 4 run of 6 sq mm and two run of 4 sq mm and one run of heavy duty PVC Conduit will be measured as one unit )

S&F in repair Switch piano; flush type single pole one way, and 6 amp complete ISI mark

S&F in repair Socket outlet multipurpose having provision for 2 in 1, 3 pin 5 amp piano flush type complete all as specified

S & F in repair Switch piano flush type single pole one way, and 15 amp complete ISI marked.

S&F in repair socket outlet 2 in 1, 2/3 pin 5 Amps and 15 Amps flush type.

M&L in repair bell push 6 amp 230 volt 50 hz AC supply flush type one way, complete all as specified

Supply & fix Bell multi music type complete

S&F for stepped type electronic fan regulator Socket type on the existing phenolic laminated sheet, etc. as required

S&F ceiling rose surface Bakelite 3 terminals 65X50mm , 230V including PVC Box of size 3"X3" round type.

S&F for Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fitting completes all as specified.

S & F highly efficient LED retrofit Lamp 9W used as a ready replacement for existing GLS/CFL of make C&S Cat part no CHANDRA/9W/W or equivalent in BajaJ/Havells/ Crompton all as specified and as directed.

S & F highly efficient LED retrofit Lamp not less than 35W used as a ready replacement for existing GLS/CFL in existing recess mounted fittings all as specified and as directed.

S&F in repair for following wall mounted type LED batten 230 V with integeral electronic driver connector block etc complete with all accessories internally prewired including neccessary mounting arrangement , provision of 2 core 1 Sqmm multistranded copper conductor from ceiling rose to fitting including neccessary LED tube rod 2FT / 4FT complete all as specified and directed.

Wall mounted 2FT LED fitting with rod 10W TARA-M/10W of make C&S or equivalent in CG/Philips/Havells

Wall mounted 4FT LED fitting with rod 20W TARA-M/20W of make C&S or equivalent in CG/Philips/havells

S&F in repair for suspended type 4FT LED fitting in sleek design 230 V with integeral electronic driver connector block etc complete with all accessories internally prewired including neccessary mounting arrangement , provision of 2 core multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Make Crompton Trend1 cat part no LCLP54-36-CDL, Havelles/ Philips/ BAJAJ

Supply and fix decorative recess mounted signature series premium commercial luminaire 34/36 Watt LED suitable for 600 mmx 600 mm recess which provides glare free cool white symetrical illumination and having integeral electronic driver connector block etc complete & neccessary mounting arrangement , provision of 2 core 1.5 Sqmm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Cat Part No LCTRP-36 CDL Stellux-P of crompton, PLUTONEO2x2PLR34WLED840S in Havells, 111981 BCTBLR 36 W ZTN NW (SKYLITE) 2"x2" of Bajaj

Supply and fix decorative Surface mounted LED luminarie suitable for indoor lighting which provides glare free cool white symetrical illumination and having integeral electronic driver connector block etc complete & neccessary mounting arrangement , provision of 2 core 1.5 Sqmm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed for the following fittings:-

600 mmx 600 mm sized 34/36 Watt Cat Part No PLUTOSURFACE2x2PLS34WLED840S in Havells, Polaris III LCTLSN-36-CDL of crompton, Sky Lite 111652 BCTBLS 36 ZT WH of Bajaj

Surface Mounted LED 18/21W Watt (Round Stape) Cat Part No ENDURANEOSURFACEDLS21WLED857S of Havells, Pearl II LCDSPLNR-18 CDL of crompton, Tara 111646 BGCML18095WH of Bajaj.

Supply and fix environment friendly high efficiency with excellent thermal management type highbay light fitting 70/80 Watt LED and having integeral electronic driver connector block etc complete & neccessary mounting arrangement , provision of 2 core 1.5 Sqmm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Cat Part No Surround II LHB 11-70 - CDL/60 of crompton, Blaze 169958 BGHBM 80W LED XE of Bajaj, BAYBRITESAUCERHBP80WLED757S90DTOLTG of Havells

Supply and fix environment friendly high efficiency with better thermal management type LED Flood light 60/70 Watt LED and having integeral electronic driver connector block etc complete & neccessary mounting arrangement , provision of 2 core 1.5 Sqmm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Cat Part No PROFILE+ LFL-60-CDL/60 of crompton, 112717 BJFL 60 W LED (MAGNUM) of Bajaj,JETANEOFL70WLED757LTG of Havells

S&F in repair for environment friendly high efficiency with better thermal management type building security light 25Watt with integeral electronic driver connector block etc complete with all accessories internally prewired including neccessary mounting arrangement, provision of 2 core 1 Sqmm multistranded copper conductor from ceiling rose to fitting complete all as specified and directed. Cat Part No ASTRA LSTS-25-CDL of crompton, Edqe Plus series 169826 BRLEP 25W LED WH of Bajaj, ENDURACITYLITEPLATSL25WLED757SASYBOPC of Havells

M & L for wall mounted GI Bracket as per sample suitable for 25 Watt building security light with necessary clamps and nut bolts all as specified and directed.

Supply & fix in repair decorative cylendrical shaped energy saving LED Bollard light fitting 08 to 10 watt 1000 mm long pressure die cast powder coated housing with diffuser with integeral electronic driver connector block etc complete with all accessories internally prewired with neccessary mounting arrangement complete all as specified and directed. Cat Part No MAYAI LBLA1-10-CDL of crompton, 111282 BGBOL 605 9W LED of Bajaj,BAMBOOBL8WLED757PSYMTOPCM of Havells

M & L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation of poles and similar works, filling mass concrete complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by the Engineer - in - Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Supply, lay, joint, test and commissioning of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 6 sqmm 2 core

Supply & fix in repair decorative wall mounted energy saving 03 watt LED bedside light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories Cat Part No 48042 of philips or equivalent in Havells/Bajaj/Crompton/Wipro

Supply & fix in repair wall mounted energy saving 12 watt LED Spot light light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories

Supply & fixing in repair of Exhaust fan, PVC body, size 250 mm, Single phase , 230 Volts including providing flexible copper cable from ceiling rose to connector of fan complete all as directed by Engineer-in-Charge. (Make :- Ventil Air-DX WHT of Havells or equivalant in Bajaj / Usha )

S&F for MCB DB VTPN 4 way double door sheet metal enclosure comprising of 200 Amps, 415 Volts, 50 Hz bus bar and neutral link complete including inserting in wall complete all as specified. Make: Legrand/L&T/Havells

S & F for MCB triple pole and neutral 415 Volts, 32 Amps, 10 KA.

S & F for 'C' curve MCB single pole & neutral 240Volts 32 Amps.

S&F 'C' curve MCB SP 240 volt 6 to 30 Amp

Disconnecting / taking out carefully old unserviceable LT Feeder pillar box and making good the disturbed surfaces including Supply, Installation, Testing & Commissioning Factory made wall monted LT feeder pillar box (CPRI approved) 440V AC, Compartmentalized, in door type in 1.6 MM thick CRCA Sheet of Appropriate Size, Front Open Double Doors, Dust & vermin proof, Cable Entry through Gland plates - Bottom only, Powder Coated, 3Phase HR Sleeved Colour Coded Aluminium Main Bus bar of 200 Amp, 03 No’s along with one Neutral Half Bus bar . Wiring with 10 Sq mm Size of Copper wire ( FR ), Cable glands brass chromium plated of different sizes suitable for incoming MCCB' 100 Amp and fitted with following specified items:- (a) MCCB 4 POLE 415 Volt, 100 Amp, Thermal Release Range 35 KA , Make : L&T / Lerand / Havells - 01 No (b) Bus bar chamber (c) MCCB 4 Pole 32 Amps 25 KA - 04 No Make : L&T / Lerand / Havells (d) MCB SPN 25A - 01 Nos (e) Space for Energy meter, digital type three Phase , with optical port - 04 Each. Note - (i) MCCB's must be Fixed Vertically in LT feeder pillar box. (ii) AS PER CPRI APPROVED "must be Write on right top corner With riveted separate plate. (iii) A separate locking arrangement ( Sliding bolt type ) must be made in LT panels.

M&L for plate earthing for complete with galvanised mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI strip 25x4 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipments etc at the other end , earth strip encased in and including 40 mm bore GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 3 mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with wire mesh , funnel and earth pit in PCC 1:2:4 type B-O using 12 mm graded crushed stone aggregate and RCC cover complete all specified and shown in electrical plate No -3 of SSR Pt-I.