Military Engineer Services Tender

... More
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.

Military Engineer Services - MES Tender

Works
Civil And Construction
Eprocure
Opening Date24 Jan 2025
Closing Soon20 Feb 2025
Tender Amount₹ 41,22,000 
Notes
Download

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs, complete all as specified

120

-

-

... More
Taking down Cement Plaster of any description on Brick or Stone walls or Concrete Surfaces including Racking out Joints, hacking for Key, scrubbing down with Water, etc. complete removal of debris outside MD land, complete all as specified

590

-

-

... More
Demolition of brickwork built in cement mortar or cement lime mortar including all quoins arches pillars etc complete all as specified

20

-

-

... More
Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specified complete all as specified

12

-

-

... More
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each, complete all as specified.

20

-

-

... More
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each, complete all as specified

8

-

-

... More
M&L for Machine cut mirror polished kota stone slab flooring with rounded edge 18-20mm thick over cement screed bed (1:6) 15mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed.

120

-

-

... More
M&L for Cutting and mirror polishing of exixting kota stone flooring, complete all as specified

250

-

-

... More
M&L for brick work with modular size kiln well burnt bricks sub-class 'B', straight or curved on plan not exc 6m mean radius, built in CM 1:6, complete all as specified.

20

-

-

... More
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight complete all as specified

100

-

-

... More
M & L for cement concrete 1:4:8, type D2, with using 40mm graded stone aggregate as in sub base to floors etc complete all as specified

45

-

-

... More
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingwith prelam sheet complete all as specified

20

-

-

... More
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified

8

-

-

... More
S&F Pressed steel door frame for single door, size 105 x 60 x 1mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or including cement concrete 1:2:4 Type B-1, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified

24

-

-

... More
S&F 35mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 12mm BWP commerical ply. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

12

-

-

... More
Preparation of new surface of wood and wood based materials of any description or girth not otherwise described and treated two coats of synthetic enamel paint over a coat of pink primer

30

-

-

... More
Providing and fixing pre painted steel sliding window Eco Series 3-Track, 2 glass panel and 1SS mesh panel sliding window including grill fabricated from Roll formed sections made of galvanized Steel colour coated/ powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sqmtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107 x 44mm, Section for shutter should be of 35 x 49mm. Section of mesh should be of 35 x 49mm. The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM). The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws, including supply and fixing of MS grill 10mm solid square bare @ 150mm centre to centre for horizontal direction and two 10mm solid square bar in vertical direction alongwith all round the frame using 30mm x 3mm MS flat with necessary welding and fixing anchorage and making good the adjacent sides of jambs of window i.e, plastering in CM 1:4 complete all as specified and directed.

12

-

-

... More
Providing and fixing fixed Eco Series louvers fabricated from Roll formed sections made of galvanized Steel colour coated/ powder coated (base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) including grills, with thickness of 0.58mm coated sections to be primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/ masonry walls by means of self expanding screws incl window glass 4mm thick including MS grill 10mm solid square bare @ 150mm centre to centre for horizontal direction and two 10mm solid square bar in vertical direction alongwith all round the frame using 30mm x 3mm MS flat with necessary welding and fixing anchorage and making good the adjacent sides of jambs of window i.e, plastering in CM 1:4 complete all as specified and directed. Make : NCL or equivalent as approved by GE.

14

-

-

... More
M&L for rendering in cement mortar (1:4), 15mm thick finished even and smooth without using extra cement complete all as specified

400

-

-

... More
M&L for plastering 15mm thick in CM 1:6 on internal face of wall, finished even and smooth without using extra cement complete all as specified and directed

190

-

-

... More
M&L for Preparation of New surface of wall and applying two coats of distemper oil bound over chalk whiting priming coat complete all as specified and as directed.

190

-

-

... More
M&L for preparation of complete removal of existing treatment of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty complete all as specified

650

-

-

... More
Material and labour for new plastered surfaces of wall pillasters, cornices etc precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified

400

-

-

... More
Material and labour for complete removal of old decorated plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of Anti fungal weather coat aacrylic emulsion paint over a one coat of wall care acrylic putty and apply coat of primer (X2) complete all as specified

800

-

-

... More
M&L for Preparation of Old painted surface of Wood of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified

250

-

-

... More
M&L for Preparation of Old painted surface of Steel of any description and applying one coat of synthetic enamel paint over 10cm width or girth complete all as specified

185

-

-

... More
M & L for Non skid ceramic tiles coloured, 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but n. exc 0.36 Sqm, over & including 20mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified

20

-

-

... More
M&L for joint free coloured glazed ceramic tiles (colour as approved laid in pattern as approved by GE) size 300 x 450mm x 7mm thick on vertical surfaces such as dados and risers to step etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles including 10mm thick rendering in CM 1:4, complete all as specified

80

-

-

... More
M & L for Granite stone (of any type) slabs 20mm thick machine cut over and including Screed bed or bedding layer of mortar 10mm thick in cement mortar 1: 6 bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting, polishing, rounding to edge complete all as specified

7

-

-

... More
M & L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified

120

-

-

... More
M & L for Virified Ceramic tiles 10mm thick light shade (square/ rectangular) on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified

12

-

-

... More
Taking up or down steel tubing and connections for bore of tube 15mm, complete all as specified and directed.

125

-

-

... More
Taking up or down steel tubing and connections for bore of tube 20mm, complete all as specified and directed.

55

-

-

... More
S&F of 20mm bore HDPE pipe of pressure 6 kgf/Sqcm, with all fittings and fixed complete to walls and ceilings or laid in floors.

55

-

-

... More
S&F of 15mm bore HDPE pipe of pressure 6 kgf/Sqcm, with all fittings and fixed complete to walls and ceilings or laid in floors.

125

-

-

... More
Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:4, cutting depth not exc 10 cm complete all as specified

125

-

-

... More
S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, including flush pipe and fixing bolts antisiphonage pipe etc, complete all as specified

3

-

-

... More
S & F in repairs PVC low level flushing cistern 10 ltrs capacity, white with all fitting and fixtures including brackets and 32mm bore PVC flush pipecomplete complete all as specified

3

-

-

... More
S & F in repairs bib tap cast copper alloy with chromium plated crutch or butterfly handle, screwed down, screwed for iron pipes 15mm bore, complete all as specified

12

-

-

... More
S&F in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including waste coupling, including cutting for and pinning in, including waste pipe complete all as specified

3

-

-

... More
S and fix in repair table top wash basin of size 515 x 415 x 145mm fixed complete incl CP waste coupling waste pipe pvc connection for hot and colled complete all as specified

1

-

-

... More
S and fix automatic urinal Flush sensor (electronic) wall mounted for male fixed to wall complete all asspecified and directed.

1

-

-

... More
S and Fix in repair vitreous china water closet rimless one piece EWC with slim soft close seat cover 660 x 350 x 745mm conceled S trap for better aesthetic Snow white -whiter than whitest ccomplete all as specified

1

-

-

... More
S & F in repairs Pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete, complete all as specified

4

-

-

... More
S & F in repairs stop valves 15mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed, complete all as specified

16

-

-

... More
S & F in repairs Brass Chromium plated two way angle cock/ two way bib cock 15mm bore complete all as specified

8

-

-

... More
S & F in reparis Stainless Steel Wall Mount Soap Case fixed to wall complete all as specified

4

-

-

... More
S & F in repairs sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

4

-

-

... More
S & F in repairs bevelled edge mirror of 5 to 6mm thick selected quality glass. Upto size 600 x 450mm, mounted on 6mm thick AC building board or commercial plywood and, fixed to wooden plug with Chromium Plated brass screw and cup washers complete all as specified

4

-

-

... More
S & F in repair PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 350 x 450mm complete all as specified

4

-

-

... More
S & F in repairs PVC connections, 450mm long with brass CP/ PTMT nuts suitable for connecting 15mm bore pipes, superior quality complete all as specified

12

-

-

... More
Dismantling water tanks and removing to store exc 250 & n. exc 1000 litres capacity, complete all as specified

6

-

-

... More
S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I 1000 litres capacity.

6

-

-

... More
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc and hoisting if required and re-fixing in position exc 500 & n. exc 1000 litres capacity, complete all as specified

2

-

-

... More
S&F in repair 20mm dia Ball valves, of PTMT high pressure, with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15 to 25mm to 142 - 455 gms), complete all as specified

5

-

-

... More
S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed, complete all as specified.

5

-

-

... More
S & F in repair curtain rails 20mm dia, decorative type, anodised aluminium alloy powder coated with either side fixing brackets including hook and side holder bracket fancy type complete all as specified

30

-

-

... More
S&F Butt hinges 100mm mild steel cold rolled, medium weight, complete all as specified

24

-

-

... More
S&F 150mm long aluminium handles, cast type anodized, complete all as specified

16

-

-

... More
S&F 200mm long aluminium, anodized barrel tower bolts of extruded section, complete all as specified

15

-

-

... More
S&F 300mm aluminium alloy, anodized, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified

15

-

-

... More
S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified

15

-

-

... More
Cutting holes in stone/ brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 exceeding half brick but not exceeding one brick complete all as specified

36

-

-

... More
S&F Mild Steel work with hollow MS tubular section square or rectangular section as rafter/ purlin including necessary welding bolting complete with using ERW or induction butt welded tubes confirming to relevant I.S. Fe 410 -W (GdeE250) quality complete all as specified

4000

-

-

... More
M & L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws complete all as specified

800

-

-

... More
M &L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, and eves board fixed with self tapping screws as specified

100

-

-

... More
M&L for two coat of synthetic enamel paint over a coat of red oxide primer over newely untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified

300

-

-

... More
Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system (E Board) hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 2.0mm thick pre-straightened GI wire. laying ceiling tiles of approvde make and specification, of size 600mm x 60mm x 6mm, complete all as specified.

120

-

-

... More
S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to floor/ walls etc complete all as specified

20

-

-

... More
S&F repair PVC (SWR) bends 110mm dia any radius with access door, complete all as specified

4

-

-

... More
S&F PVC (SWR) junction single, (Single T) 110mm dia equal or unequal with access door complete all as specified

4

-

-

... More
S&F in repair PVC (SWR)vent cowl 110mm bore, complete all as specified

4

-

-

... More
S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified.

4

-

-

... More
S&F repair PVC (SWR) bends 75mm dia any radius with access door, complete all as specified

4

-

-

... More
M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement etc complete, fixed in repair complete all as specified

12

-

-

... More
M&L for 100mm thick PCC, type D2 (1:4:8) using 40mm graded stone aggt in foundation, fillings and mass concrete complete all as specified.

800

-

-

... More
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick bed of crushed stone, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified

700

-

-

... More
M&L for Chequaered cement concrete tiles 20cm x 20cm x 25mm thick set jointed and pointed with grey cement and no pigments in neat cement slurry in floor over 20mm thick screed bed (1:6) complete all as specified

100

-

-

... More
M&L for providing cement concrete Type B1 1:2:4 (20mm graded aggregate) as in coping, complete all as specified

6

-

-

... More
Hacking out old broken glass (any size, quality or description) from wooden or steel frames at any height fixed with beads or putty all as specified and directed.

50

-

-

... More
S&F, 3mm thick plain sheet glass ordinary quality and galzing with oil putty or wooden beads in squares, n.exc 0.5Sqm in each pane complete all as specified

50

-

-

... More
S&F mild steel framed work such as framed and hung as gates ornamental and intricate design, including pintle hinges, stops, hand-made sliding bolts, etc grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified

500

-

-

... More
M & L for Water proofing on roof/ parapet on non accessable surface including dismantling of existing roof treatment with the follwing steps:- STEP - 1. Firstly to cleain the existing surface of the roof peparation and making the surface dust free. STEP - II. Crack more then 0.5mm the opening of crack in V grove and filling with epoxy mortor. STEP - III. Initial coat (mixed 1/2 liter of water in 1 liter of Roof seal of Asian paint/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUIT. Dr. Fixit) as a primer (Area cover 1 liter=9-10 sqmtr). STEP - IV. After six hours of primer, apply first coat (one coat) of Asian paint/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUIT. Dr.Fixit roof seal in a particular direction without mixing of water. Now left it for six hours (Area cover 1 liter= 1.2 sqmtr). STEP - V. After again six hours of first coat and apply the second coat of Dr.Fixit Roof seal in a other direction without mixing of water (Area cover 1 liter= 1.2 sqmtr). Now left it 24 hours. STEP - VI. Lay down a 45 GSM fiber glass mesh into the coatings a sandwich layer while the first coat is still wet. all as specified and directed by Note:- The work of water proofing treatment shall be got executed through expert team of manufacturers of authorised applicator of manufacturer. Make Asian paint/ PIDILITE/ STP/ FOSROC/ ACC/ L&T/ MARUIT Dr. Fixit or equivalent.

35

-

-

... More
Taking down carefully copper/ alluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendents, rgulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

322

-

-

... More
Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors complete all as specified and directed.

400

-

-

... More
Taking down existing ceiling fan/ exhaust fan of any size and re-fixing the same after B/R work including winding of the fan, replacement of defective parts, painting of the complete fan with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter and providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed.

20

-

-

... More
Taking down carefully TPN DB/ SPN DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc complete all as specified and directed.

12

-

-

... More
Taking down carefully light fitting any type for refixing OR taken in schedule of credit complete all as specified and directed.

206

-

-

... More
Taking down existing old unserviceble LT UG/ service cable of any descrition and size complete all as specified and directed.

80

-

-

... More
Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed/ surface conduit/ casing caping of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal/ PVC flush box, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed directed by Engr-in-Charge for the following:-

-

-

-

... More
(a) One light/ fan/ bell controlled by one, one way switch 5/6 Amps, complete all as specified and directed.

263

-

-

... More
(b) One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 Amps switch, complete all as specified and directed.

17

-

-

... More
(c) One 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 5/6 Amps switch, complete all as specified and directed.

22

-

-

... More
Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FR LSH copper conductor cable in and including rigid non- metallic PVC concealed/ Surface conduit/ casing caping of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FR LSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular metal/ PVC flush box, covered with modular white cover plate with inner frame suitable for modular switches and blank plates of suitable size incl taking down carefully copper/ alluminium power point wiring switches, sockets, and making good disturbed surface of walls and floors etc. complete all as specified and directed by Engr-in-Charge.

20

-

-

... More
S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V, complete all as specified and directed.

227

-

-

... More
S&F modular switch 1 way 6 A, 1 module complete all as specified and directed.

302

-

-

... More
S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

39

-

-

... More
S&F switch modular type 16 A, 1 module complete all as specified and directed.

20

-

-

... More
S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

20

-

-

... More
S&F lamp holder insulated body with back plate for batten fittings complete all as specified and directed.

20

-

-

... More
Supply and fixing Inverter LED batten 20 watt with squre profile and polycarbonate channel. Lithium lon battery with charging time 8 hourse -10 hourse and back up time upto 4-10 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified and directed.

186

-

-

... More
S & F in replacement of Energy saving new generation environmental friendly long life versatile LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting and necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.

7

-

-

... More
S & F in replacement of LED luminaire 600mm x 600mm square LED panel 35/36 watts, 220 volts, lumen efficacy of 120 lumens/ watt, AC Surface/ recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

16

-

-

... More
Supply and fix in replacement of LED bulb of 7 watt, Of base B-22, Cat Part No LHLDBWHB4L8R007, lm 700, col tamp 6500 K suitable for fixing in lamp holder complete all as specified and directed.

20

-

-

... More
Supply and Fix in replacement of flush mounting factory made Vertical FP DB, IP-43 Protection -IK 09 with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of space for 100-125 Amps MCCB as incomer and SPN/TP MCBs as out going, 6 way (Optium F1+18 Module) including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall or make suitable arrangement to installed the DB on the wall by drilling screwing complete all as specified and directed.

1

-

-

... More
S&F (in replacement) MCB DB SPN 8 way double door with 200 Amps rated bus bar, 230 volts, 50Hz,IP-43 IK-09 protection with magnitic locking including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall or make suitable arrangement to installed the DB on the wall by drilling screwing complete all as specified and directed.

10

-

-

... More
Supply and fixing (in replacement) 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning connection with suitable size aluminium/ copper lugs complete all as specified and directed.

15

-

-

... More
Supply and fixing (in replacement) 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning connection with suitable size aluminium/ copper lugs.

61

-

-

... More
S&F (in replacement) MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum/ copper lugs complete all as specified and directed for 100 Amps rating, 36 KA breaking capacity complete all as specified and directed.

1

-

-

... More
S & F for sheet metal enclosure MCB DB TPN 6 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

1

-

-

... More
Supply and fixing amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of 4P 63 Amps and current carrying capacity in the MCB DB complete all as specified and directed.

1

-

-

... More
M & L for sub main wiring with 02 runs of 6 Sqmm main wire along with 01 run of 06 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. Note:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

200

-

-

... More
All as per item No.115 here in above but with 2 runs of 4 Sqmm main wire along with 01 runs of 2.5 Sqmm earth wire.

200

-

-

... More
S&F replacement of ceiling fans complete with blades, down rods 15mm/12mm upto 3 mtr, electronic regulator and remote with battery and complete accessories, 230 V, 50Hz, 1200mm sweep and rated power 26W (+ 10%) and rate speed 350 RPM (+ 10%) Min air delivery 210 CFM with service value shall not be less than 8.46 BEE as per BIS. Five star rated with brushless direct current motor (BLDC), painting to match with existing surfaces including writing the MES number with synthetic enamel paint complete all as specified and directed.

5

-

-

... More
Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 2 core laid in pipes, trenches/ ducts, on poles complete all as specified and directed.

130

-

-

... More
S & F Integral decorative LED bollard with polycarbonate diffuser square shaped with IP 65 protection suitable for 9 watts LED bulb with necessary MS base box made out of MS sheet of 2mm thick of suitable size abbended in PCC 1:2:4 base with suitable size of nut and bolts to fix the light on PCC, elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed.

10

-

-

... More
S & F for LED post top lantern 30 watt light fitting made of fully cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection mepro PTL-02 with polyurethane paint with acrylic window cover, provided B22 brass holder including bulb 12 watts with aluminium cover complete with all accessories fixed on GI pipe 50mm dia including removal of old unserviceable one complete all as specified and directed.

2

-

-

... More
S & F for LED floodlight made up of pressure die cast aluminum housing with toughened glass and high power LEDs and secondary lenses with IP66 protection. System efficacy ≥ 110 LPW 10KV SPD included. complete with all accessories complete all as specified and directed.

2

-

-

... More
M&L for in replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on complete all as specified and directed.

2

-

-

... More
Supply, laying and testing and commisioning in replacement of cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core laid in pipes, trenches/ ducts, on poles complete all as specified and directed.

80

-

-

... More
Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.

30

-

-

... More
Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified and directed.

13.5

-

-

... More
Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

8.59

-

-

... More
Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

4.91

-

-

... More
M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and directed. (Note : Punned thickness of sand shall be measured)

4.05

-

-

... More
M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection complete all as specified and directed.

0.56

-

-

... More
S & F in replacement of modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 HZ AC supply complete all as specified and directed.

20

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.