Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Healthcare and Medicine
Eprocure
Opening Date5 Sep 2024
Closing Date15 Oct 2024
Tender Amount₹ 1,00,00,000
Costs
EMD
₹ 1,75,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_671992_1Bid Award Id
ViewTender No
83935/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender documents with errata and amendments
BOQ Items
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.
290
-
-
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.
315
-
-
Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 300 mm internal dia of pipe complete all as specified and directed.
270
-
-
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(below or above ground level) complete all as specified and directed
7
-
-
Demolition of concrete in ground floors and pavings (unreinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed.
50
-
-
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
50
-
-
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
290
-
-
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
315
-
-
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 300 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
270
-
-
Taking down of rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
90
-
-
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.
50
-
-
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.
40
-
-
M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed.
40
-
-
M&L for SGSW drain pipes laid in trenches of 200 mm internal diameter of pipe and jointed as specified complete all as specified and directed.
60
-
-
M&L for SGSW drain pipes laid in trenches of 300 mm internal diameter of pipe and jointed as specified complete all as specified and directed.
60
-
-
M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 150 mm bore of pipe complete all as specified and directed.
150
-
-
M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 200 mm bore of pipe complete all as specified and directed.
180
-
-
M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 300 mm bore of pipe complete all as specified and directed.
160
-
-
M&L for laying DWCP 150mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed
100
-
-
M&L for laying DWCP 200mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed
75
-
-
M&L for laying DWCP 300mm dia pipes in trenches class SN-8 conforming to IS 16098 (Part-2) in 6 mtr length with coupler complete all as specified and directed
50
-
-
M&L for PCC 1:2:4 type B-1 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
5
-
-
Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.
8.7
-
-
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
13
-
-
M&L brick work with Fly ash bricks in cm 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and directed.
10
-
-
M&L brick work with Fly ash bricks in cm 1:6 using modular bricks straight or curved on plan to any radius. but except brick complete all as specified and directed.
3
-
-
M&L Broken bricks of gauge not exceeding 63 mm for loose filling in sokage pit, sokage wells complete all as specified and directed.
2
-
-
Supply only integral water proofing compound all as specified and directed.
15
-
-
Taking down cement plaster any description on brick or stone walls and including wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
150
-
-
M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed
150
-
-
M&L for preparation of newly plastered surface of wall applying two coat of white wash complete all as specified and directed.
150
-
-
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.
0.5
-
-
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.
100
-
-
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.
25
-
-
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.
10
-
-
M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:4 complete all as specified and directed.
7.2
-
-
Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
400
-
-
S&F TMT bars 6mm to 8mm dia cut to length bent to shape required incl cranking bending & binding with mild steel wire aunealed not less than 0.9mm diacomplete all as specified and directed.
200
-
-
M&L RCC (Nominal mix) 1:2:4 type B-1 using 20mm graded stone aggregate slabs supported, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately)
1.5
-
-
Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed
10
-
-
Form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for rough finished concrete surface exc 10 cm but not exc 20 cm wide complete all as specified and directed.
350
-
-
Removal of sludge by mechanical mean through suction from 10 to 25 users septic tanks / manholes and burying the sludge in pits with suitable depth & filled by earth out side the MOD land perimeter including earth work and removal of surplus soil including dewatering of water complete all as directed. Note - Cleaning should be done same day by hiring Machine by contractor thorugh private party.
10
-
-
Removal of sludge by mechanical mean through suction from 25 to 50 users septic tanks / manholes and burying the sludge in pits with suitable depth & filled by earth out side the MOD land perimeter including earth work and removal of surplus soil including dewatering of water complete all as directed. Note - Cleaning should be done same day by hiring Machine by contractor thorugh private party.
10
-
-
Removal of sludge by mechanical mean through suction from 50 and above users septic tanks / manholes and burying the sludge in pits with suitable depth & filled by earth out side the MOD land perimeter including earth work and removal of surplus soil including dewatering of water complete all as directed. Note - Cleaning should be done same day by hiring Machine by contractor thorugh private party.
5
-
-
Clearing & removal of blockage, of any type in WC, bathroom, kitchen including floor/nahani traps, soil waste/vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a distance up to 50 metres to the entire satisfaction of engineer-in-charge. Note:- (a) Contractor shall detail his supervisor to office of AGE B/R I SI Lines daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area divided in two parts i.e. Md accn & OTM accn under this contract.
(b) Contractor shall provide service providers (sweepers) separately for both the areas as per the complaints list given alongwith all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day.
(c) Complaint/blockage cleared in one building in a day may be for WC, bath, kitchen, floor/nahani traps etc shall be treated as one complaint.
(d) Please note that all the complaints relating to internal sewage (WC/bath/kitchen etc) shall be attended within same day (within 12 hour).
(e) In case any complaint pertaining to inside the building (WC/bath/kitchen) is not attended by 12.00 hours. A penalty @ Rs. 100 per complaint shall affected from contractor payments.
1800
-
-
Clearing & removal of all blockage in sewage line of any dia of sewer lines, manholes of any section and any depth, in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes manunally / mechanically including desludging of manhole /sewage line where required and odered by Engineer-in-charge and keeping sewer line functional, upto final drop/outlet into septic tank /central sewage system terminating in other joining zone/ area or into sewage wells complete all as specified. Note:- (a) Contractor shall detail his supervisor to office of AGE B/R I SI Lines daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract.
(b) Contractor shall provide service providers (sweepers) as per the complaints list given alongwith all requisite tools, equipments, including safely measures for attending complaint and ensure completion report by 5.00 PM same day.
(c) Please note that all the complaints relating to sewage line shall be attended within same day (within 12 hour). In case of blockage in sewage line could not be detacted/completed same day and concerned JE / Engineer-in-Charge is satisfied to the efforts applied but the same shall be attended and all blockage must be cleared by 24 hours (next day by 5.00 PM) without fails.
(d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM). A penalty @ Rs. 100/- per complaint shall affected from contractor payments.
(e) Blockage cleared between two man holes irrespective of length in between shall be treated as one complaint.
1800
-
-
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
5
-
-
Mechanically pumping out sewage liquid from septic tanks/manholes of any size and depth and removal the same to distance n.exc 50m out side of the building perimeter including any type of T & P required etc. dewatering of water complete all as directed.
50
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
300
-
-
M&L 25mm thick cement concretetype B-1 1:2:4 (20 mm graded aggregated) complete all as specified and directed.
300
-
-
M&L Screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:4 complete all as specified and directed.
300
-
-
M&L Hand cut kota stone slab flooring 20-25mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed.
40
-
-
M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.
110
-
-
M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles.
150
-
-
S&F in repairs vitreous china squatting pan of Orissa pattern 580x440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) all as specified and directed.
5
-
-
S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) all as specified and directed.
10
-
-
S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe
15
-
-
S&F inrepair CP Health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories complete all as specified and directed.
40
-
-
S&F in repairs Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.
15
-
-
S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe including waste pipe complete all as specified and directed.
5
-
-
S&F in repairs Vitreous China Urinal Half Stall type, white with union for discharge pipe including waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed.
5
-
-
Dismantling structural steel work including doors,gates etc complete all as specified and directed.
1
-
-
M & L Rolled/tubular sections as in manhole cover and frame as per specified jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E-250) quality B complete all as specified and directed
1000
-
-
S&F of 1.6 mm thick Mild steel, plain black sheet in hearths; covering to man holes, water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and directed.
4
-
-
Preparation of old surfaces of wall including brooming , scraping down and applying two coat of white wash on walls complete all as specified and directed.
100
-
-
M&L for preparation of new or previously untreated surfaces of steel & iron work & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
50
-
-
Dismantling of tiles/stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed
25.5
-
-
M&L machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size comfirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement & pigment complete all as specified and directed.
70
-
-
M&L for taking out old existing interlocking paver blocks any thickness, size & type from the existing location including snad dust, stacking properly the serviceable tiles for reuse; removal of the unserviceable materials & disposal to low lying areas at a distance not exceeding 250m and relaying the paver blocks by providing 50 mm thick stone dust cushion and joints filled with sand complete all as specified and directed. [NOTE: The quoted rate is deemed to include for coarse sand & dust as required at site.]
50
-
-
M&L machine pressed precast concrete interlocking paver block (Reflective type) in any shape and size comfirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement with pigment complete all as specified and directed.
185
-
-
M&L for sand filling under paver blocks including spreading levelled watering and well ramming in layer not exc 25 cm complete all as specified and directed.
15.25
-
-
Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), using 1:2:4 type B0 including all mouldings but excluding frame
38
-
-
M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.
50
-
-
M & L 50 mm Sand stone slabs in foothpath, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:3 or cement mortar 1:4, complete all as specified and directed.
15
-
-
Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed.
270
-
-
S&F Pre-painted galvatume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified complete all as specified and directed.
250
-
-
All as per item No 79 above but plain sheeting, in ridges completed all as specified and directed.
20
-
-
Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
20
-
-
Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
15
-
-
Taking down shutters of any descripition exc 1sqm and n exc 2sqm each and removing to or from store complete all as specified and directed.
15
-
-
Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.
10
-
-
Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed.
10
-
-
Taking down shutters of any description and refixing in the same opening exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.
10
-
-
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
40
-
-
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
90
-
-
Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
30
-
-
S&F 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
40
-
-
Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
50
-
-
Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
30
-
-
S&F 20 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
40
-
-
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.
40
-
-
Demolition of brick work or stone masonery built in cement mortar complete all as specified and directed.
32
-
-
M&L fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 complete all as specified and directed.
20
-
-
M&L fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and directed.
12
-
-
Demolition of concrete in ground floors and pavings (un reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed.
31.37
-
-
M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
2
-
-
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed.
10
-
-
-Ditto- but for dados and similar work on skirting 20-25mm thick kota stone complete all as specified and directed.
2
-
-
M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.
35
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
635
-
-
M&L 25mm thick cement concretetype B-1 1:2:4 (20 mm graded aggregated) as in sub floors , sub bases, floors and paving complete all as specified and directed.
195
-
-
M&L Screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:4 complete all as specifed and directed.
420
-
-
M&L for rendering 10mm thick on fair faces of brick work or concrete surface back coat to walll tile in CM 1:3 complete all as specified and directed.
170
-
-
M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, of any shade area of each tiles exc 0.18 sqm but not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match complete all as specified and directed.
125
-
-
M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 Sqm as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
10
-
-
M&L for vitrified light shade tiles 10mm thick (square/rectangular)double charged polished, area of each tiles exceeding .36 Sqm, in floors etc, set and jointed in neat cment slurry and pointed in white or coloured cement to match complete all as specified and directed.
100
-
-
M&L for vitrified light shade tiles 10 mm thick (Square/rectangular) Double charged polished, area of each tile exceeding 0.36 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
10
-
-
M&L Non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.11 Sqm but not exe 0.18 sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
85
-
-
All as per item No 111 above but on vertical surface complete all as specified and directed.
10
-
-
M&L glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.
125
-
-
M&L Marble work 18-20 mm thick (Makrana white) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing n white cement (1:2) using marble dust with admixture of pigment to mactch with shade complete all as specified and directed.
20
-
-
M&L Granite work 18-20 mm thick (of any type/ colour) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing n white cement (1:2) using marble dust with admixture of pigment to mactch with shade or granite complete all as specified and directed.
25
-
-
M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.
30
-
-
M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm ,as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
5
-
-
M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed.
80
-
-
M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm , as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed.
10
-
-
S&F in repair to laminated wooden flooring action Tesa including polishing all as per manufacturers direction, including taking old flooring complete all as specified and directed.
50
-
-
S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed.
325
-
-
Hacking out old broken glass (any thickness quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
35
-
-
S&F 3mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and directed.
15
-
-
S&F 4.0mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and directed.
15
-
-
S&F 4.0 mm thick plain sheet glass ordinary quality exc 0.50Sqm in each pane complete all as specified and directed.
5
-
-
S&F in repairs 10 to 12mm thick toughfen glass in door, partitions etc similar work etc with stainless steel handle, locking arrangement and with hinges in approved shape and design complete all as specified and directed.
15
-
-
S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
25
-
-
S&F 105*60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and directed
25
-
-
S&F 125*60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and directed
20
-
-
S&F Factory made solid panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails .Ms. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails ,lock rail &bottom rail ,panel will be of wire gauze in lieu of PVC Sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.
15
-
-
S&F machine moulded and factory made 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels with decorative laminate type 1, on both sides complete and fixed to chowkats complete all as specified and directed.
15
-
-
S&F Solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed.
25
-
-
S&F Factory made solid PVC moulded door shutter with particle board core 32 to 35mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick 3D plain colour PVC sheet on the front face and 2 mm plain colour PC sheet on back face complete all as specified and directed.
12
-
-
S&F in repair to Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed.
5
-
-
S&F in repiar to Aluminium (Extruded section body ) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.
15
-
-
S&F Butt hinges 100mm , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
150
-
-
S&F Butt hinges 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
50
-
-
S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.
130
-
-
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
130
-
-
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.
30
-
-
S&F in repair to Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.
80
-
-
S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
45
-
-
S&F in repair 300mm., ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
10
-
-
M&L in repair 25mm Stainless Steel Drepary curtain rod decorative type incl curtain fancy type including bracket & nobs complete all as specified and directed
180
-
-
Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.
350
-
-
S&F GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two ea\qual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
150
-
-
Providing and fixing 12mm Gypsum board ceiling fixed with GI angle/channel frame work incl GI wire/ mesh, etc in different levels all complete including joints filled with paster of paris, putty including POP work/Cornices and applying two coat of oil bound distemper complete all as specified and directed.
150
-
-
S&F galvanised cold rolled steel section framed work size 600x600mm grid size 24x38x0.60mm Tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section incl expansions fasteners as in ceiling complete all as specified and directed.
200
-
-
S&F 6mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed. (Frame work for ceiling shall be measured and paid separately)
200
-
-
S&F inrepair to Solid PVC Wall Lining consisting of 5mm thick but wood grain printed PVC sheet used instead of plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings complete all as specified and directed.
47
-
-
S&F inrepair to 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
150
-
-
S&F 40mm wide of flap continuous (piano) hinges, brass , bright finish complete all as specified and directed.
25
-
-
S&F in repair prelaminated partcle board 18/19 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work fixed in repair complete all as specified and directed.
10
-
-
S&F 100 mm Stainless steel handle , cast type, polished bright complete all as specified and directed.
50
-
-
S&F in reapir 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.
45
-
-
S&F in reapir 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.
90
-
-
S&F in repair to Cabinet Hinges Soft Close SS 8 Crank complete all as specified and directed
100
-
-
S&F in repair to magnetic catcher for cupboard shutter complete all as specified and directed.
50
-
-
S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified and directed.
15
-
-
S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified and directed.
15
-
-
S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified and directed.
15
-
-
Taking down cement plaster on brick or stone walls/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
380
-
-
M&L 15mm thick rendering intwo (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed.
150
-
-
M&L 15mm thick rendering in CM 1:6 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed.
100
-
-
M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfaces as in ceiling complete all as specified and directed.
130
-
-
M&L one coat of 3mm thick wall care putty on walls/ceiling all as specified and directed complete all as specified and directed.
2500
-
-
M&L for preparation of newly plastered surface of wall and and applying two coat of oil emulsion distemper white/coloured over one coat of white cement based putty (where it is required) complete all as specified and directed. Note:- Putty shall be measured and paid seperately under the relevent item.
100
-
-
M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint over and incl a coat white cement based putty (where ever required), complete all as specified & directed. Note :- Exterior Acrylic Emulsion Paint only, Should be carried out by any of approved Company /firm (Apex of M/S Asian Paint or Equivalent)
150
-
-
M&L for preparation of newly plastered surface of ceiling by brooming down and applying three coat of white wash complete complete all as specified and directed.
130
-
-
Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and one coat of white wash on walls complete all as specified and directed.
1500
-
-
All as per item No. 170 above but on ceiling complete all as specified and directed.
500
-
-
M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over and one coat of white cement based putty (where it is required) complete all as specified and directed. Note:- Putty shall be measured and paid seperately under relevant item)
2000
-
-
M&L complete removal of old decorated surface of ceiling and applying one coat of oil emulsion distemper white/coloured over and one coat of white cement based putty (where it is required) complete all as specified and directed. Note:- Putty shall be measured and paid seperately under relevant item)
500
-
-
Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper complete all as specified and directed.
1500
-
-
Preparation of old decorated surfaces of ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper complete all as specified and directed.
300
-
-
Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint on wall complete all as specified and directed.
2500
-
-
M&L complete removal of old decorated surface of and applying two coats of exterior weather proof water base emulsion paint over a coat white cement based putty (where ever required), complete all as specified & directed. Note :- Exterior Acrylic Emulsion Paint only, Should be carried out by any of approved Company /firm (Apex of M/S Asian Paint or Equivalent)
700
-
-
S&F Over Counter Basin selected quality fixed with granite counter of approved make decorative type including cuppling and waste pipe, complete fixed in repairs complete all as specified and directed.
4
-
-
S&F in repair to WHB oval type of selected quality fixed with granite counter of approved make decorative type including cuppling and waste pipe, complete fixed in repairs complete all as specified and directed.
4
-
-
S&F in repair to casket type wash down water closet with seat cover , waste pipe, cistern with lid & fittings (complete set) and fixing complete all as per manufacturere instructions complete all as specified and directed.
2
-
-
S& F in repair to CP Towel rack complete all as specifed and directed
10
-
-
S&F in repairs vitreous china squatting pan of Orissa pattern 580x440 mm white with integral foot rests ( excluding flushing cistern and flush pipe) complete all as specified and directed.
2
-
-
S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing costern and flush pipe) complete all as specified and directed.
10
-
-
S&F in repairs PVC low level flushing cistern of 10 Litres with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed.
15
-
-
S&F in repairs Vitreous china wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and directed.
10
-
-
S&F in repairs Stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.
4
-
-
S&F in repair stainless steel plate rack complete assembeled set of (Size: 31 x 36 x 10 inch) fixed with screws complete all as specified and directed.
4
-
-
S&F in repair stainless steel plate rack complete assembeled set of (Size: 24 x 30 x 10 inch) fixed with screws complete all as specified and directed.
4
-
-
S&F in repairs 15 mm Angle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
20
-
-
S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.
15
-
-
S&F in repairs 15 mm pillar taps cast copper alloy, with capstain head .chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed complete as in repair incl necessary small GI fittings complete all as specified and directed.
5
-
-
S&F in repair to 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed.
7
-
-
S&F in repair to CP Health faucet suitable for 15mm bore with connecting pieces including all necessary fittings and accessories complete all as specified and directed.
35
-
-
S&F in repairs overhead square shower size 150mmx150mm complete all as specified and directed.
15
-
-
S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower complete all as specified and directed.
2
-
-
S&F in repair to PVC connections 15mm size with PTMT nuts of length 450 mm.complete as in repairs complete all as specified and directed.
25
-
-
S&F in repair to PVC connections 15mm size with PTMT nuts of length 600mm.complete as in repairs complete all as specified and directed.
25
-
-
S&F in repairs Hydraulic Plastic water closet seat cover, any colour, slow motion / soft closure complete all as specified and directed.
5
-
-
S&F in repairs Plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.
15
-
-
S&F tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed.
15
-
-
S&F in repair to 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.
8
-
-
S&F in repair to 15 mm Angle valve two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.
10
-
-
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm complete all as specified and directed.
thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupcomplete all as specified and directed.
12
-
-
S&F in repairs glass shelf (with bracket) of 22 inch long chromium plated fixing complete all as specified and directed.
18
-
-
S&F in repair corner glass shelf (with bracket) complete all as specified and directed.
18
-
-
S&F inrepair CP toilet paper holder with stainless steel flap complete all as specified and directed.
12
-
-
S&F inreapir soap dish holder of bootom Cp and glass holer for soap complete all as specified and directed.
10
-
-
S&F inrepair CP towel ring round with round flange complete all as specified and directed.
10
-
-
Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed.
240
-
-
Dismantling timber in fillets rails, posts, rafters, purlins, etc under 40 Sqcm in section unframed work complete all as specified and directed.
20
-
-
S&F Pre-painted galvatume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified complete all as specified and directed.
200
-
-
All as per item No 211 above but plain sheeting, in ridges complete all as specified and directed.
20
-
-
M&L Fibre glass reinforced translucent corrugated sheeting with two corrugations sid lap fixed with L type or J type or cranked hook bolts complete all as specified and directed.
20
-
-
Dismantling structural steel work including doors,gates etc complete all as specified and directed.
1.14
-
-
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering,doors, etc to be prepared for hanging or sliding with and including either hooks and hingsor steel hanging door fittings(including of steel sheeting or other covering.(Fe-410-W(Gde-E250) complete all as specified and directed.
120
-
-
M&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
100
-
-
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
900
-
-
M&L preparation of New or previouly untreated surface of steel and iron surface of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
100
-
-
S&F MS work as in bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans and smilar articles complete all as specified and directed.
20
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed.
60
-
-
S&F in repair 75 mm PVC(SWR) pipes Single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
20
-
-
S&F in repair PVC(SWR) 110mm pipes Single socketed in any length with rubber rings joints laid in trenches or in floors complete all as specified and directed.
40
-
-
S&F in repair 75mm PVC(SWR) bend complete all as specified and directed.
25
-
-
S&F in repair 75mm PVC(SWR) junction single (single 'T') equal or unequal complete all as specified and directed.
10
-
-
S&F in repair 75mm PVC(SWR) vent cowl complete all as specified and directed.
15
-
-
S&F in repair110mm PVC(SWR) vent cowl complete all as specified and directed.
15
-
-
M&L in repair PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd.
15
-
-
S&F in repair PVC(SWR) 110 mm bend complete all as specified and directed.
20
-
-
M&L grinding and polishing kota/marble/terazoo/mosaic flooring complete all as specified and directed.
30
-
-
Dismantling water tanks of Exc 500 litres but n exc 1000 litre capacity and removing to store complete all as specified and directed.
16
-
-
S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers(Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.
8
-
-
S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.
8
-
-
S & F in repair 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed.
15
-
-
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
70
-
-
Taking down existing old roof treatment of any description , any type including removal old Tar felt, screed bed and plastering etc complete all as specified and directed.
147
-
-
M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bitumen @ 1.2kg/sqm(paid separately) by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and as directed.
147
-
-
M & L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete Roof slab at least for 72 hrs complete all as specified and directed.
147
-
-
M & L for cement concrete type B0 1:2:4 (12.5mm graded aggregate ) benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and as directed.
0.25
-
-
M & L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:4 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and as directed.
50
-
-
Material & labour for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction complete all as specified and directed. (Note;- water proofing compound shall be measured and paid separately as supply only)
80
-
-
M&L for bituminous 85/25 @ 1.2 kg/sqm in each coat to be applied on prepared surface till the surface is properly impregnated complete all as specified and directed.
147
-
-
M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid for separately.
1
-
-
M&L for grout of permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI Pipe Nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per instruction complete all as specified and directed.
30
-
-
Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
100
-
-
All as per item No.244 above but on steel surfaces complete all as specified and directed.
50
-
-
Dismantling of pre-cast concrete lovres and jallies complete all as specified and directed.
20
-
-
Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), using 1:2:4 type B0 including all mouldings but excluding frame complete all as specified and directed.
20
-
-
Dismantling of tiles/stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed
28
-
-
M&L Machine pressed precast concrete interlocking paver block (reflective type ) any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness, M-35 grade including 50mm sand cushion layed in floors or paving etc spread, levelled and rammed including watering complete all as specified and directed.
230
-
-
All as per item No. 249 above but 80mm thickness complete all as specified and directed.
50
-
-
M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, sub base etc complete all as specified and directed
21
-
-
S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65*100 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.
40
-
-
S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65*125 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.
18
-
-
S&F in repair to Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65*125 mm comprisingof virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction.
20
-
-
S&F inrepair 35 mm Factory made single extruded WPC (Wood Polymer Composite) solid plain Glazed shutter door of 35 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note : Wiremesh Shall be measured and paid separetely).
22
-
-
S&F in repair half stall Vitreous china urinal white colour of size 710x480x300mm, Ist quality with sensotrinic, sensor flushing valve with complete kit including CP waste with PVC down waste pipe upto floor level (complete set) complete all as per manufacturer instructions, complete all as specified and directed.
4
-
-
Petty reapirs to half stall vitreous china urinal/ sensor type urinal , including changing of sensor of flushing valve with complete kit, complete all as specified and directed.
4
-
-
S&F in repairs Vitreous China Urinal Half Stall type, white with union for discharge pipe including waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed
5
-
-
S&F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
40
-
-
S&F in repair 100 mm Stainless steel handle , cast type, polished bright complete all as specified and directed.
30
-
-
S&F in repair Butt hinges 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
25
-
-
S&F 30 mm thick "RAJSHRI" brand factory made moulded door shutter-wood free consisting of frame madeout of M.S tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom & locl rail M.S frame shall have a coat of metal primer of approved make & manufacturer. The panel shall consist of 20 mm thick multichanmber hollow PVC section of 1mm wall thickness bonded using solvent cement / cinoacrylate adhesive with 5mm (+- 0.25) thick moulded PVc sheet of densitiy 600 kg/ Cbm manufactured by ISO -9001-2015 certified company with 2,4,6 raised pannel design in prelam colour after routing the molded design on one side of the inside pannel 5mm (+- 0.25) plain PVC sheet to be pasted using solvent cement / cynoacrylete adhesive on other one side of the hollow PVC section. all the four edges of the pannel to be seald with lipping of 10mm thick and 20 mm wide PVC sheet baton (made by sticking 2 Nos. fom PVC sheets of 5mm (+-0.25) thickness using PVC solvent cement adhesive. Door edges liping to be PVC ink of matching colour of plain / prelam moulded PVC sheet of door 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provn at lock height. door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25mm x 2mm and 50mm long steel screw drilled suitable to pass through both the walls of the MS tube other hardware should be fixed with 25mm x 8mm size steel screw etc, complete all as specified and directed, manufaacturer specification and drawing.
12
-
-
S&F "RAJSHRI" brand factory made PVC door frame (single rebate) made out of single piece extruded solid PVC fom profile with homogenous film celuler structure having smooth outer integral skin having 62mm width and 32mm thickness of density 600kg / Cbm manufactured by an ISO-9001-2015 certified company, frame will be mitred and jointed with self driven self taping screws of size 50mm x 8mm and PVC solvent cement or fusion heat welding process all as per manufactures specification and complete all as specified and directed.
35
-
-
S&F in repair of extruded Aluminum anodised handles 100 mm long, fabricated type, complete all as specified and directed.
20
-
-
S&F in repair of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed.
20
-
-
S&F in repair of MS pressed handles,oval type,stove enamelled black 150 mm long, complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised barrel tower bolts 200 mm long of extruded section, complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised barrel tower bolts 125 mm long of extruded section, complete all as specified and directed.
20
-
-
S&F in repair of MS barrel tower bolts,stove enamelled black,with bright bolt 200 mm long, complete all as specified and directed.
20
-
-
S&F in repair of MS barrel tower bolts,stove enamelled black,with bright bolt 125 mm long, complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 250mm long, plate type, complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 200mm long, plate type, complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 150mm long, plate type, complete all as specified and directed.
20
-
-
S&F in repair of MS sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts,four on bolt plate and two on plate, 250mm long, plate type, complete all as specified and directed.
20
-
-
S&F in repair of MS sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts,four on bolt plate and two on plate, 200mm long, plate type, complete all as specified and directed.
20
-
-
S&F in repair of MS sliding door bolts,plate type,stove enamelled black,with bright bolt not less than 12 mm dia with and incl a min of 06 bolts and nuts,four on bolt plate and two on plate, 150mm long, plate type, complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised 150mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised 100mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.
20
-
-
S&F in repair Brass chromium plated shower rose 125mm size with swivel joints incl fixing to steel pipe/union complete all as specified and directed.
20
-
-
S&F in repair of MS 100mm long hasp & staple type,, incl bolt to hinge plate and fix with screws complete all as specified and directed complete all as specified and directed.
20
-
-
S&F in repair of Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed.
20
-
-
S&F in repair of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.
20
-
-
S&F in repair of Butt hinges with galvanised MS hinge pin, 100 mm size, aluminium anodised extruded, B-21 type, complete all as specified and directed.
20
-
-
S&F in repair of MS bright polished Cup board knobs, 40mm dia size with nut, screw & washer, complete all as specified and directed.
20
-
-
S&F in repair of PTMT waste coupling, 32 mm dia, half or full thread, complete all as specified and directed.
25
-
-
S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed.
25
-
-
S&F in repair of Hot water connection (Braided Hose type), 450 x 15mm dia, Brass nuts at both end (for geyser), complete all as specified and directed.
15
-
-
S&F in repair of Brass Spindle for Bib Cock 15 mm, complete all as specified and directed.
35
-
-
S&F in repair of SS grating of 125 mm dia size, complete all as specified and directed.
20
-
-
S&F in repair of SS grating of 125 mm dia size with hole for waste pipe, complete all as specified and directed.
20
-
-
S&F in repair Grating round 140 mm size of PTMT (Minimum weight 50gms) complete all as specified and directed.
15
-
-
S&F in repair of Gun-metal gate valve with iron wheel, screwed both ends, 20 mm bore size, complete all as specified and directed.
15
-
-
S&F in repair of Gun-metal gate valve with iron wheel, screwed both ends, 15 mm bore size, complete all as specified and directed.
10
-
-
S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed.
15
-
-
S&F in repair 32mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.
5
-
-
S&F repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
10
-
-
S&F repairs ball bearing for rolling shutters complete all as specified and directed.
10
-
-
Running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed.
22
-
-
Welding in repairs n. exc 2.5cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed.
35
-
-
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
42
-
-
Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
128
-
-
Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
36
-
-
Refixing of GI tubing medium grade 15 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors at complete all as specified and directed.
18
-
-
Refixing of GI tubing medium grade 20 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors at complete all as specified and directed.
48
-
-
Refixing of GI tubing medium grade 25 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors at complete all as specified and directed.
18
-
-
S&F 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
24
-
-
Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls and ceilings or laid in floors complete all as specified and directed.
20
-
-
S&F 20 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
60
-
-
S&F 25 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
18
-
-
Dismantling water tanks of capacity exc 250 litres but nexc 500 litres and removing to store complete all as specied and directed
25
-
-
Dismantling water tanks of capacity exc 500 litres but nexc 1000 litres and removing to store complete all as specied and directed
15
-
-
S&F 500 ltrs capacity Rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top) Dimen hoisted and fixed in position all as specified in IS Code -12701-1996 including 20mm dia tank nipple complete all as specified and directed
25
-
-
S&F 1000 ltrs capacity Rotational moulded 3 layer HDPE water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in IS Code -12701-1996 including20mm dia tank nipple complete all as specified and directed
15
-
-
S&Fof 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc complete all as specified and directed.
40
-
-
S&F of gunmental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
10
-
-
S&F in repair to 25 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc complete all as specified and directed.
25
-
-
S&F in repair to 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc complete all as specified and directed.
60
-
-
S&F in repair to 15 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod & hight density plastic ball complete screwed for iron pipe or brass furred and fixed with fittings such as (socket, nipple, union) etc complete all as specified and directed.
20
-
-
S&F in repair to gunmental, globe or gate valves 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
10
-
-
S&F in repair to gunmental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
20
-
-
S&F in repair to gunmental, globe or gate valves 15 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
10
-
-
S&F in repair to PVC Tank Lid (Cover) for tank of 500 Ltr capacity including locking arrangement with pad lock if required of Godrej size 50 mm (steel) complete all as specified and directed.
20
-
-
S&F in repair to PVC Tank Lid (Cover) for tank of 1000 Ltr capacity including locking arrangement with pad lock of Godrej size 50 mm (steel) if required complete all as specified and directed.
20
-
-
M&L for cleaning and degermination inside of RCC/PVC water storage tanks capacity not exceeding 500 Ltr of any description and in any position comprising following seven stage cleaning and sterilization of water tanks through bacteriological treatment by using Trebac G5/Inchlor-5/NB-10, Terbac G65/Inoxi-60/NB-69 and ultra violet rays complete all as specified and as directed.
(a) First stage is to drain out the water by using exit valve or our own high capacity dewareing systems or any other suitable method approved by Engr-in-Charge.
(b) Second stage is cleaning all the algae formation inside the tank by using Terbac G 10/ Inchlor-5/NB-10, a laboratory tested barnded chemical of the company and scrubbing the walls of the tanks.
(c) Third stage is fresh water cleaning by high speed jet pump with pressure 5 PSL.
(d) Fourth stage first bacteria screening and Sterilization by using Terbac G5/Inchor-5/ NB-10, a Laboratory certified branded halogen compound, test certificate of TerbacG5/Inchor-5/ NB-10, from government laboratory mentioning suitability for sterilization.
(e) Fifth stage is cleaning the floors of the water tank by heavy duty industrial vaccum cleaner.
(f) Sixth stage is the second bacteria screening and sterilizing method by using ultra violet ray Ejector covering 360 degree with in the tank and kills all suspended bacteria. g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agend TerbacG65/Inoxi-60/NB-69.
Note:-(i) Test certificate of Terbac G65/Inoxi-60/NB-69 from Government Laboratory mentioning suitability for sterilization should be submitted to the office before using for Sterilization.
(ii) Outlet pipe of OHT should be plugged before cleaning the OHT to avoid entering scale and the same shall be reconnected after cleaning the OHT and the quoted rate is deemed to include for this provision.
(iii) Contractor will be responsible for rectification of complaints occurred during cleaning of tank i.e. No water in tank/ Over flow due to broken of float valve/blockage of Outlet lines due to silt and rectification cost will be deemed to be included in quoted rate.
300
-
-
M&L for cleaning and degermination inside of RCC/PVC water storage tanks capacity exceeding 500 Ltr but not exceeding 1000 ltrs of any description and in any position comprising following seven stage cleaning and sterilization of water tanks through bacteriological treatment by using Trebac G5/Inchlor-5/NB-10, Terbac G65/Inoxi-60/NB-69 and ultra violet rays complete all as specified and as directed.
(a) First stage is to drain out the water by using exit valve or our own high capacity dewareing systems or any other suitable method approved by Engr-in-Charge.
(b) Second stage is cleaning all the algae formation inside the tank by using Terbac G 10/ Inchlor-5/NB-10, a laboratory tested barnded chemical of the company and scrubbing the walls of the tanks.
(c) Third stage is fresh water cleaning by high speed jet pump with pressure 5 PSL.
(d) Fourth stage first bacteria screening and Sterilization by using Terbac G5/Inchor-5/ NB-10, a Laboratory certified branded halogen compound, test certificate of TerbacG5/Inchor-5/ NB-10, from government laboratory mentioning suitability for sterilization.
(e) Fifth stage is cleaning the floors of the water tank by heavy duty industrial vaccum cleaner.
(f) Sixth stage is the second bacteria screening and sterilizing method by using ultra violet ray Ejector covering 360 degree with in the tank and kills all suspended bacteria. g) Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified branded strong oxidizing agend TerbacG65/Inoxi-60/NB-69.
Note:-(i) Test certificate of Terbac G65/Inoxi-60/NB-69 from Government Laboratory mentioning suitability for sterilization should be submitted to the office before using for Sterilization.
(ii) Outlet pipe of OHT should be plugged before cleaning the OHT to avoid entering scale and the same shall be reconnected after cleaning the OHT and the quoted rate is deemed to include for this provision.
(iii) Contractor will be responsible for rectification of complaints occurred during cleaning of tank i.e. No water in tank/ Over flow due to broken of float valve/blockage of Outlet lines due to silt and rectification cost will be deemed to be included in quoted rate.
150
-
-
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required, reconneting and refixing in position capacity exc 250 and n exc 500 ltr. including Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.
20
-
-
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required, reconneting and refixing in position capacity exc 500 and n exc 1000 ltr. including Cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.
15
-
-
Taking down carefully existing point wiring (any type viz. aluminum or copper) with wooden batten/surface PVC conduit (with its fittings)/PVC casing-capping or any other type for light, fan, power point (including switch, socket, ceiling rose, etc.) and making good disturbed surface of wall/ceiling to match with existing surface after necessary rewiring complete.
225
-
-
M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates & Wiring to be done as per approved colour code in IE rule.
40
-
-
All as per Srl item No -3 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.
20
-
-
All as per Srl item No -3 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed.
8
-
-
All as per Srl item No-3 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed.
20
-
-
All as per Srl item No.3 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed.
10
-
-
M&L for Casing caping/conduit point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LS cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates & Wiring to be done as per approved colour code in IE rule.
70
-
-
All as per Srl item No 335 here in before but for one light point controlled by 5/6 A two 2-way switches complete all as specified and directed.
4
-
-
All as per Srl item No 335 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed.
20
-
-
All as per Srl item No 335 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed.
8
-
-
All as per Srl item No. 335 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed.
15
-
-
All as per Srl item No.335 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed.
10
-
-
S&F in repairs Switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.
160
-
-
S&F in repairs Switch piano, flush type, single pole, two way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.
30
-
-
S&F in repairs Bell push, flush type, 6 Amp piano type, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed.
15
-
-
S&F in repair Switch piano, one way, single pole, 15 Amp, 240 volt, 50Hz, flush type, ISI marked complete all as specified and as directed.
10
-
-
S&F in repair socket outlet 2 in 1, 3 pin 5 and 15 Amp flush type, 240 volt AC complete all as specified and as directed.
10
-
-
S&F in repairs Socket outlet multipurpose having provision for 2 & 3 pin, 6 Amp flush type, 240 volt AC complete all as specified and as directed.
80
-
-
S&F in repairs switch socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type, 230 volt AC with PVC Back Cover ISI marked complete all as specified and as directed.
100
-
-
S&F in repairs Ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed.
40
-
-
S&F in repairs Buzzer electric, single phase, 240 volt, AC complete all as specified and as directed.
5
-
-
S&F in repairs Bell, Ding Dong type, electric, single phase, 240 volt, AC complete all as specified and as directed.
20
-
-
S&F in repairs Bell, Multi Music type, electric, single phase, 240 volt, AC complete all as specified and as directed.
4
-
-
Supply and fixing angle holder, PVC/Poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.
80
-
-
Supply and fixing battern holder, PVC/Poly carbonate type with back plate suitable for batten fittings complete all as specified and directed.
30
-
-
Supply and fixing in replacement of dismantling and removing 36/40W tube light fitting patty/box/decorative/any type and replacement with LED type tube light fitting, surface mounted lumanaires, 18 W, 240V, decorative ultra slim round /square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with bipin holders, LED lamps,connector block, etc. complete with all accessories internally pre-wired and including connecting up with flexible 3 core copper conductor cable of suitable size complete all as specified and directed. Note :- Contractor will produce manufacturer test certificate & min 2 year warrenty from date of fixing.
350
-
-
S&F in replacement warm white in colour LED tube light complete fitting , surface mounted luminanaires , 18 watt, 240V, decorative ultra slimround/square profile LED lighting fixture with extruded polycarbonate body, environmental friendly , energy efficient ready to use pack with bipin holders, LED Lamps ,connector block, etc complete with all accessories internally prewired and including connecting up with flexible 3 core copper conductor cable with suitable size complete all as specified and directed. Note :- Contractor will produce manufacturer test certificate & min two year warrenty from date of fixing.
30
-
-
S&F in replacement of white LED Tube light fitting two feet 10 watt, slim design, 230 volts, including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. Note :- Contractor will produce manufacturer test certificate & min two year warrenty from date of fixing.
30
-
-
S&F in replacement of warm white LED Tube light fitting two feet 10 watt, slim design, 230 volts, including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. Note :- Contractor will produce manufacturer test certificate & min two year warrenty from date of fixing.
20
-
-
S&F in repairs ceiling fan regulator electronic step type 240 V, AC 50 Hz single pole, 100 watts flush/socket type complete all as specified and as directed.
100
-
-
S&F single core PVC insulated unsheathed flexible conductor FR-LS cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor AC 230 V complete all as specified and directed.
200
-
-
S&F single core PVC insulated unsheathed flexible conductor FR-LS cables 2.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor AC 230 V complete all as specified and directed.
200
-
-
S & F modular switch, one way, 6 Amp, one module, 240 volts complete all as specified and directed.
40
-
-
S & F modular switch, one way, 16 Amp, one module, 240 volts complete all as specified and directed.
20
-
-
S & F modular Bell Push switch, one way, 6 Amp, one module, 240 volts complete all as specified and directed.
8
-
-
S&F modular socket outlet 2-in-1, 5pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed.
30
-
-
Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, complete all as specified and directed.
15
-
-
Supply and fixing modular switch socket combination, multipurpose 6 pin, 16 amp, 3 module complete all as specified and directed.
15
-
-
Supply and fixing modular fan regulator, 5 step, high speed complete all as specified and directed.
20
-
-
S & F modular metal flush box of 6 module complete all as specified and directed.
10
-
-
S & F modular metal flush box of 4 module complete all as specified and directed.
10
-
-
S & F modular metal flush box of 3 module complete all as specified and directed.
10
-
-
S & F modular white cover plate with frame of 6 module complete all as specified and directed.
10
-
-
S & F modular white cover plate with frame of 4 module complete all as specified and directed.
10
-
-
S & F modular white cover plate with frame of 3 module complete all as specified and directed.
10
-
-
Taking down unservicable sub main wiring including service connections, of any size and any description including conduit pipe and making good disturbed surface of walls/ ceiling to match with existing surface after necessary rewiring complete all as specified and directed .
200
-
-
M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 6.0 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 6.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 6.0 sqmm cable, one run of 6.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.
100
-
-
M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with single core PVC insulated ISI marked FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into 20mm external diameter rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. in concealed wiring system by cutting of walls (brick or stone) and making good disturbed surface of wall in CM 1:3 and PVC insulated stranded copper conductor of 4.0 sqmm nominal cross section area as earth wire complete all as specified and directed. Note : (i)Wiring to be done as per approved colour code in IE rule. (ii) Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.
100
-
-
Taking down old unserviceable MCCB/MCB DB of any size and capacity including MCCB/MCB and wooden boards complete all as specified and directed.
14
-
-
S&F sheet metal enclosure for MCB, DB, TPN, 415 Volts, 200 amps rated busbar, 4 way, Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first class hardwood of suitable size for mounting of DB box complete all as specified and as directed. NOTE:- MCB shall be measured and paid seperatly.
3
-
-
Supply and fixing factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for MCCB as incomer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.
NOTE:- MCCB shall be measured and paid seperatly.
3
-
-
S&F sheet metal enclosure double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately.
5
-
-
S&F sheet metal enclosure double door type surface mounted concealed in wall 12 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. NOTE:- MCB shall be measured and paid separately.
3
-
-
S&F MCCB 160 Amp, 3 Pole, breaking capacity 36 KA with complete electrical connections by appropriate size of copper lugs, complete all as specified and directed.
3
-
-
S&F in repairs MCB SP, 240 volts, 10 KA breaking capacity, 'B' curve, of capacity 6 to 32 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.
80
-
-
S&F in repairs MCB SP, 240 volts, 10 KA breaking capacity, 'B' curve, of capacity 40 amps including connection with suitable size aluminium / copper lugs complete all as specified and directed.
20
-
-
S&F in repairs MCB SPN suitable for 240 volts, 'B' curve,AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA, complete all as specified and directed.
35
-
-
S & F in repairs MCB SPN suitable for 240 volts, 'B' curve, AC supply 40 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
20
-
-
S & F in repairs MCB TPN suitable for 240 volts, 'B' curve,AC supply 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
30
-
-
S & F in repairs MCB TPN suitable for 240 volts, 'B' curve,AC supply 100 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed.
15
-
-
S&F in replacement 3 pin plug top AC-230 V, 5 Amp, complete all as specified and directed.
20
-
-
S&F in replacement 3 pin plug top AC-230 V, 15 Amp complete all as specified and directed.
30
-
-
S&F in replacement sheet metal earth plug & socket, single pole and neutral with and including 1no. single pole MCB 20 Amps 240 volts complete all as specified and directed.
30
-
-
S&F in replacement PVC insulated PVC sheathed, flexible circular cable 3 core, 2.5 Sqmm strandered copper conductor AC,
100
-
-
S&F non metallic rigid PVC casing and caping ISI marked of 20mm size complete all as specified and directed.
80
-
-
S&F non metalic PVC conduit ISI marked of size 20mm dia complete all as specified and directed.
80
-
-
Supply and fix in repairs Coral post top lantern fitting 25 Watt ( for Gate light) , energy saving, environment friendly, long life aesthetically designed with symmetrical light distribution with complete accessories and with PVC insulated multistranded copper flexible cable 0.5 sqmm three core all as specified and directed.
30
-
-
S&F in replacement building security light fitting made up of pressure die cast alluminium housing with high efficient 30 Watt LED as lighting source and pc over having top opening separate driver compartment with IP-66 Protection and including IK 07 protection suitable galvanized iron pipe "light grade" brackets 1 mtr length bent to shape to obtain required shape including clamps ,nuts/bolts/washers etc connecting with with PVC insulated multistranded copper flexible cable 0.5 sqmm three core copper wire complete all as specified and directed.
20
-
-
S&F in replacement flexible wire three core copper conductor of size 23/0.0076 for ceiling fans ,light fittings etc complete all as specified and directed.
50
-
-
Supply and fix in replacement of LED slim square/circular panel light fitting for surface ceiling light 12 watt, colour warm white including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed.
10
-
-
Supply & fixing in replacement Recess mounting Spot LED light round downlighter designed with excellent thermally managed luminaire 12 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size complete all as specified and directed.
6
-
-
Supply & fixing Flexible LED strip uses high brightness SMD LED as the light source for indoor application only.luminaire 24 watt, 220V AC with high efficiency light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with three core flexible coppder conductor cases of suitable size (Flexion Neo Led Strip 24 W of any colour) complete all as specified and directed
50
-
-
Supply & fixing in replacement LED Garden Light (BAMBOO LED BOLLARD)new generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source complete all as specified and directed.
4
-
-
Supply & fixing in replacement curved 6 watt LED warm white adjustable multiple angle mirror Light including inbuilt LED driver new generation, energy saving, environmental friendly, long life aesthetically designed for diffused lighting with high power LED as light source complete all as specified and directed by Engineer in charge
5
-
-
Supply & fixing in replacement 3 watt LED warm white rotate in 360 degree angle Bed Side Light including inbuilt LED driver energy saving, environmental friendly, long life aesthetically designed aluminium landscape for diffused lighting with high power LED as light source complete all as specified and directed by Engineer in charge
4
-
-
M & L in replacement for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 4.0 mm dia galvanised mild steel wire by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 20 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed.
2
-
-
S&F in repairs laminated hylum sheet cover of 11 X 13 inches size, ISI marked of Make" Hylem" including cutting grooves for mounting of fittings like switches, sockets, fan regulators etc; including fixing in location with new galvanised screws and cup washer complete all as specified and directed.
5
-
-
S&F in repairs laminated hylum sheet cover of 9 X 11 inches size, ISI marked of Make" Hylem" including cutting grooves for mounting of fittings like switches, sockets, fan regulators etc; including fixing in location with new galvanised screws and cup washer complete all as specified and directed.
10
-
-
S&F in repairs laminated hylum sheet cover of 5 X 8 inches size, ISI marked of Make" Hylem" including cutting grooves for mounting of fittings like switches, sockets, fan regulators etc; including fixing in location with new galvanised screws and cup washer complete all as specified and directed.
10
-
-
S&F in repairs laminated hylum sheet cover of 5 X 5 inches size, ISI marked of Make" Hylem" including cutting grooves for mounting of fittings like switches, sockets, fan regulators etc; including fixing in location with new galvanised screws and cup washer complete all as specified and directed.
10
-
-
Dismantling of ceiling fans AC single phase 230 volts of sizes 1200mm/1400mm (collected from MES fan store ) any make / model except old vintage, dismantling its stator, rotor, cutting out burnt copper winding and providing new winding with super enamelled copper winding wire of existing size including cleaning of slots providing oil impregnated insulation paper or minimax, fibre, insulation in slots and well wraping with cotton tape, bind with cotton thread and varnishing over all with winding varnish, cleaning of bearing housing and shaft, replacing spares such as split pins, blade screws etc as required and reassembling and depositing the repaired fan to MES fan store after testing complete all as specified and directed.
80
-
-
All as per item No.409 above but exhaust fan, 400/450 mm sweep, AC single phase, 230/240 volts.
4
-
-
All as per item No.409 above but exhaust fan, 300/380 mm sweep, AC single phase, 230/240 volts.
5
-
-
All as per item No.409 above but exhaust fan, 230/250 mm sweep, AC single phase, 230/240 volts.
15
-
-
All as per item No.409 above but wall / pedestal fan, of any sweep and capacity
5
-
-
S&F in replacement condenser carrier clip (PVC) in build connector two way fixed with screw on down rod or housing complete all as specified and directed.
100
-
-
S&F in replacement upper set of clips for down rod with rubber Bush (Garari) including set of nut bolts and washer, pin complete all as specified and directed.
80
-
-
S&F in replacement rubber bush (Garari) for mounting at upper side of down rod clip complete all as specified and directed
80
-
-
S&F in replacement gun metal bush self lubricated, any size, suitable for ceiling and wall fans complete all as specified and directed
15
-
-
S&F in replacement Fan condenser 2.5 mfd, 230 volts complete all as specified and directed.
100
-
-
S&F in replacement Fan condenser 3.15 mfd, 230 volts complete all as specified and directed.
20
-
-
S&F in replacement Fan condenser 4.0 mfd, 230 volts complete all as specified and directed.
20
-
-
Supply only of the item Bearing No 6201'ZZ' for fixing against defective parts of fan taking down under item No 414 to 420 here in before complete all as specified and directed.
80
-
-
Supply only of the item Bearing No 6202'ZZ' for fixing against defective parts of fan taking down under item No 414 to 420 here in before complete all as specified and directed.
80
-
-
Supply only of the item Bearing No 6203'ZZ' for fixing against defective parts of fan taking down under item No 414 to 420 here in before complete all as specified and directed.
10
-
-
Supply only of the item Bearing No 6204'ZZ' for fixing against defective parts of fan taking down under item No 414 to 420 here in before complete all as specified and directed.
10
-
-
Taking down ceiling / wall fan from fan hook and disconnection from ceiling rose, dismantling of fan parts i e. down rod and connector/condenser, nut bolts, split pins, rubber bush (garari), condenser carrier clip (PVC), in build connector two way, etc complete servicing by cleaning greasing/oiling in side surface of rotar by CTC with sand paper and repair and re - fitting / reassembling and making the fan fuctional and fixing the fan in position and testing complete all as specified and directed. Note: - Only rubber packing (garari) condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately.
100
-
-
Taking down exhaust fan and disconnection from ceiling rose, dismantling of fan parts i e. connector/ condenser, nut bolts, condenser carrier clip (PVC), in build connector two way, etc complete servicing by cleaning greasing/oiling in side surface of rotar by CTC with sand paper and repair and re - fitting / reassembling and making the fan fuctional and fixing the fan in position and testing complete all as specified and directed. Note: - Only rubber packing (garari) condenser, condenser carrier clip (PVC) in build connector two way shall be measured and paid separately.
50
-
-
S&F in repairs outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 450 mm /380 mm sweep exhaust fans complete all as specified and directed.
4
-
-
S&F in repairs top and bottom canopy of ceiling fan( any sweep) of make , colour and pattern as per existing model all as specified and directed
30
-
-
S&F in repairs outer frame complete with clamps, rubber packing, nut bolts etc & all accessories duly painted suitable for 230 mm /300 mm sweep exhaust fans complete all as specified and directed.
10
-
-
M&L for painting of Ceiling fan upto 1200/1400 mm sweep complete, with two coats of DUCO paint (ISI grade) white using spray machine.Spray painting including cleaning, washing and preparation of old painted surfaces including writing MES Nos in all ceiling and Exhaust fan complete all as specified and directed.
Note:- Taking down and fixing of fan will be measured under item No. 425 & 428 here-in-before.
100
-
-
M&L for painting of Exhaust fan upto 280/300/380/450 mm sweep with smoke grey paint, with two coats of DUCO paint (ISI grade) white using spray machine.Spray painting including cleaning, washing and preparation of old painted surfaces including writing MES Nos in all ceiling and Exhaust fan complete all as specified and directed.
Note:- Taking down and fixing of fan will be measured under item No. 426 & 427 here-in-before.
50
-
-
Dismantling geyser of 25 ltrs capacity and of any description, M&L for cleaning and de-scaling the inner tank and other parts / accessories including inlet, outlet, overflow, geyser element, thermostat, U assembly etc. with brush & cleaning rods and using and circulating concentrated de-scaling solution mixed with water in suitable proportion till the complete deposits/scale is removed and approved by the Engineer-in-Charge, brazing for stopping the leakage of copper inner tank/ gas welding for stopping the leakage of inner steel tanks, fixing the serviceable parts in position, setting insulation properly as required, reassembling the complete geyser after cleaning, repairing and painting, fixing & installation of the geyser in position and its testing to the entire satisfaction of Engineer-in-Charge complete all as specified and directed. NOTE:-
(i) De-scaling chemical shall be concentrated HCL of make as approved by GE.
(ii) Painting of Geysers shall be on requirement basis and shall be measured and paid for separately under appropriate item of sch
(iv) Old disturbed insulation shall be made good by the contractor with using old retrieved glass wool and additional quantity of glass wool for insulation, if any required, is deemed to be included in the quoted unit rate.
(v) Spares as required shall be measured and paid seperately.
50
-
-
All as per Item Sl No. 432.00 above but geyser of capacity 50 Ltrs .complete all as specified and directed.
5
-
-
S&F 1.5 KW capacity Heating Element (ISI marked)round type/thread/triangle / Push/ Screw base type with ‘O’ ring including making electrical connection complete all as specified and directed.
80
-
-
S&F 2.0 KW capacity Heating Element (ISI marked) round type/thread/triangle/ Push/ Screw base type with ‘O’ ring including making electrical connection complete all as specified and directed.
30
-
-
S&F electronic Heating Element (ISI marked) fitted with auto cut thermostat 1.5/2.0 KW suitable for 25/50 ltr geyser including making electrical connection complete all as specified and directed.
5
-
-
S&F in replacement Geyser assembly suitable for 25 ltr capacity, ISI marked complete all as specified & directed.
5
-
-
S&F in replacement Geyser assembly suitable for 50 ltr capacity, ISI marked complete all as specified & directed.
3
-
-
S&F in replacement thermostat suitable for 25/50 Ltr Geyser ISI marked with setting range 30 C to 80 C suitable for 230 volts AC electric supply complete all as specified & directed.
100
-
-
S&F in replacement inner tank made of stainless steel suitable for 25 Ltr geyser complete all as specified & directed.
4
-
-
S&F in replacement inner tank made of stainless steel suitable for 50 Ltr geyser complete all as specified & directed.
4
-
-
S&F in replacement outer tank made of steel duly powder coated suitable for 25 Ltr Geyser complete all as specified & directed.
4
-
-
S&F in replacement outer tank made of steel duly powder coated suitable for 50 Ltr Geyser complete all as specified & directed.
4
-
-
S&F in replacement bottom cover suitable for 25 Ltr Geyser complete all as specified & directed.
4
-
-
S&F in replacement bottom cover suitable for 50 Ltr Geyser complete all as specified & directed.
4
-
-
S&F in replacement Indicating lamp (set of two) 230 volts 50 HZ AC suitable for geyser any type (round, square or rectangular type) any capacity complete all as specified and as directed.
10
-
-
M&L for painting of Geyser 25 ltr capacity with two coats of DUCO paint (ISI grade) white using spray machine.Spray painting including cleaning, washing and preparation of old painted surfaces including writing MES Nos complete all as specified and directed.
5
-
-
M&L for painting of Geyser 50 ltr capacity with two coats of DUCO paint (ISI grade) white using spray machine.Spray painting including cleaning, washing and preparation of old painted surfaces including writing MES Nos complete all as specified and directed.
5
-
-
S&F in replacement PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.
40
-
-
S&F in replacemnt PVC connections 15 mm size Nylon braided, heavy duty, 450mm long including rubber washers (suitable for hot water) complete all as specified & directed.
50
-
-
S&F in replacement pressure release valve suitable for 25/50 Ltr capacity geyser complete all as specified & directed.
10
-
-
Notes for all items:
Supply of complaint handling software system including inventory with following features:-
(a) App based complaint system (Android & IOS) : Development and supply of web based app applicable for both android & IOS developed exclusively for GE Bhopal station. The app to consist of various provision to register complaint by user and download complaint by admin. The approval of functions in the app will be done by GE before finalisation of web based app. The app shall have minimum feature of online complaint booking and handling, mapping of Qtr under GE Bhopal, lodge a new complaint, add complaint, assigned complaint to technician, close complaint, inventory, and feedback from user as satisfactory or unsatisfactory etc.
(b) The developed app should be high quality of security level, firewall protection and bot protection and adhering all cyber security aspects.
(b) SMS Features: User can receive complaint docket no by SMS, closed complaint, hold complaint, assigned complaint to technician. Close complaint, inventory etc cost in carried on account of sending and receiving SMS from/to user will be included in the quoted rate during currency of contract. No additional payment shall be made on this ground.
(c) Maintenance/upkeeping of all the records and status of day to day all kind of related complaints with works by deploying Data Entry Operators (Skilled) from 9 AM to 5 PM including Sunday & holidays. Contractor to provide 04 (Four) telephone number at customer care support/hot line at his service centre for enabling the user to lodge his complaint. This number will be attended 24 hrs 07 days’ work during currency of centre. No additional payment will be made on this ground. The rates also include cost of compatible computer system, printer, peripherals, consumables, telephone, internet/broad band connection etc comprising of following duties:-
(i) Downloading the complaints received from service centre on daily basis for assigning the work to the workers of respective trade.
(ii) Uploading all the complaint received at the service centre by any mode in the MES E-Complaint System/ App based complaint system and uploading the status of attending the complaints on daily basis so that the back log is not more than one day/as per required complaint as per time/agreement.
(iii) Preparing abstract for unattended complaint on daily, weekly and monthly basis and submitting the same to concerned Engr-in-Charge.
(iv) Failure in maintaining Service Centre in working condition shall attract recovery @ Rs. 500/- per day. Spare capacity of individuals after attending emergency complaints may be utilized for attending routine complaints.
(v) The contractor shall take immediate action to attend all complaint lodged on app based system or any complaint assigned to him through site order book / verbal instructions from Engineer-in-Charge or on telephones / through service centre of app based system or through any mode, from occupants. In all cases he shall attend the complaints in the specified duration. All complaints received by any mode shall be entered in the app based system and docket No for the complaint will be raised immediately and notification for the same shall be communicated to user through app and SMS system whichever is possible. All complaints received on phone calls will be only registered in the register and app based system.
(vi) The daily complaint monitoring system on the app based portal will be used for lodging and attending complaints will be provided by the contractor.
(vii) The expenditure on account of internet for using app and infrastructure shall be borne by the contractor. Nothing extra shall be paid on this account.
(viii) Any complaint raised by user by any means (i.e. app based, telephonically, SMS, Service Centre helpline or any other mode) shall be uploaded on app based software by the auth rep of contractor at Service Centre. If the user gives a feedback that the complaint has been attended unsatisfactorily, it will be considered as unattended. No payment on this ground shall be made to contractor.
(ix) In subject work the contractor has to deploy adequate number of (a) Sewer Men (b) Carpenters (c) Plumbers (d) Mason (e) Electrician from 9 AM to 5 PM excluding Sundays/Holidays as mentioned for attending and rectifying day to day complaints related to all kinds of repair/replacement to be carried out in the works. The number of helpers to assist the skilled workers are required to be increased based upon number of complaints and quantum of work involved and during emergencies irrespective of working hours as decided by GE/Engr-in-Charge. The rates for same are deemed to be included and nothing extra shall be paid and no claim is admissible on this account. (x) Welder/blacksmith (Skilled) are to be deployed as and when required on complaint basis. The work includes electric welding machine, gas cutter, welding rods (ISI) including hire charges of welding machine, cost of welding rods, transportation of welding machine to site and carrying out other associated operations for attending the complaints and making system fully functional, to the entire satisfaction, complete all as specified and directed by GE/Engineer-in- charge.
(xi) The contractor is also required to deploy 01 (one) site Engineer (Skilled) who will amicably supervise/ assist the entire works. The qualification shall be Degree in Civil Engineering with 03 years’ experience or Diploma in Civil Engineering with 05 years’ experience.
-
-
-
Notes for all items (contd/-....):-
(i) Quoted rates shall include repair of all minor items such as cups, washers, nuts & bolts, screws and all material required except specified under relevant item of supply only (Schedule A part I) etc or any other material as directed by Engr-in-charge. (ii) The quoted rates shall also incl the labour part for all the supply only items as enlisted under sch A part-I.
(iii) Materials retrieved from repair/replacement of parts or attending complaints, other than mentioned in credit schedule shall be the contractor's property and nothing shall be recovered from the contractor. Rates quoted are deemed to be inclusive of this aspect.
(iv) Apart from above based upon Number of complaints & quantum of work involved and during emergencies irrespective of working hours, the additional work force is required to be deployed accordingly as decided by GE/Engr-in-Charge. The rates for same is deemed to be included in this item only and nothing extra shall be paid and no claim is admissible on this account. (v) The bidders are advised to pay due cognizance while quoting their rates with respect to minimum fair wages, periodical hikes in wages, repair/replacement of parts, labour charges for fixing of supply only items, extra manpower required keeping in view quantum of complaints/works and during emergencies for timely disposal and user facilitations for which no excuses shall be entertained.
(vi) The contractor is responsible to provide all T&P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site.
(vii) It may also be noted that the subject CA is for 09 months therefore the periodical change of workforce as per labour laws is the sole responsibility of the contractor i/c payment of minimum wages plus allowances etc and no worker shall have any lien/ claim of permanency in Govt Services during or after the contract period. (viii) For the details of the work force/labours required in the subject work refer PS clause. ix) Any other misc works/services connected with user facilitation as per direction of GE/Engr-in-Charge.
(x) Recovery on Absentees:-
The contractor will maintain attendance records of the staff, which will be checked by the Junior Engineer/Engineer-in-Charge/GE of the work. In case of absence of any staff, recovery shall be made at the following rates: (a) Skilled @1500/- per day/ per person. (b) Semi-skilled @1200/- per day/ per person. (c) Unskilled @1000/- per day/ per person.
(xi) Recovery on non-attendance of complaints:-
The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephones, MES call centres/IVRS from occupants. In all cases he shall attend the complaints in the specified duration. Penalty for non-attending Complaints:- (a) Complaint pending 3-12 hours - 100 Rupees per complaint.
(b) Complaint pending 12-24 hours - 200 Rupees per complaint.
(c) Complaint pending 24-48 hours - 500 Rupees per complaint.
(d) Complaint pending more than 48 hours - 1000 Rupees per complaint.
(xii) Recovery on non-wearing of uniform:-
The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 50/- per person per day.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements