Military Engineer Services Tender

M&L for rolled mild steel works as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,Fe-290 (Gde E16) complete all as speicfied and directed by Engr-in-charge,

M&L for plain cement concrete type B2,1:2:4 (40 mm graded stone aggregates) as in post holes complete all as speicfied and directed by Engr-in-charge,

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E250 quality A,complete all as specified by Engr-in-Charge

M & L Hardcore of gauge exc. 63 mm but n exc.100 mm of broken stone boulder, deposited spreaded and levelled in layer n exc. 15 cm thick water and rolled to a true completed as specified as directed

Material and labour for 100 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in subbase etc all as specified and directed.

M&L for 40 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate),complete all as specified and as directed by Engr-in-Charge

M&L for Forming Construction joints joint 30 mm deep x 10 mm wide filled with sealing compoud. ( Joint will be made in concrete after setting of flooring and cutting the joint by diamond cuter or suitable mechincal cutter) etc complete all as specified and as directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter,fixed with self tapping screws complete all as specified and as directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified.

M&L Mild steel bolts.purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long and dia exc 12 mm but n exc 20 m complete all as specified and as directed.

Taking down chowkats or frame n.exc 1.5 Sqm each (steel window/Ventilator ) including shutters without taking off shutters from the frame and removing from site.complete all as specified and as directed by Engr-in-Charge.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge

S&F aluminium powder coated louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge

S & F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

Supply and fix in repairs PLEATED blinds made of polyester fabric with alumnium coating at its back. Pleates of one inch with segments at the interval of not exceeding 100mm top and bottom channels made of aluminium in matching colours. cord lock and pulleys made of brass, design and type as approved by GE complete all as specified and as directed.

S & F for aluminum alloy powder coated door shutter partly panelled partly glazed shutter having door frame made out of alumunium anodised section of size 100x44.45x2.00 mm thick and shutter made out of bottom rail of tube section 114x44.45x2.00 mm thick and top rail, middle rail, styles of tube section 85x44.45x2.00mm thick, using 5 mm thick tinted glass of selected quality of required size fixed with rubber beadding, aluminium clip, glazing plate and 6-8 mm dia anchor tod and 12 mmm thick both side prelaminated particle board including fixed aluminium anodizede 2 nos 125 mm circular handle, 200 mm long tower bolts -2 Nos, Door Stopper 2 Nos, One No lock 4 lever (ISI), vertical type of 65 mm with triplicate key, bush and including 3 Nos aluminium butt hinges Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, Making good of wall surface to match with existing surface complete door frame fixed to wall with 8 nos rawl plugs 150mm complete all as specified and as directed by Engineer-in-Charge.

M & L for taking down cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,complete all as specified and as directed

M & L preparation of New plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over a coat of chalk whitening primer complete all as specified and as directed by Engineer-in-charge.

M & L for preparation new surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

Demolition of brick /stone walls built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles,complete all as specified and directed by Engr-in-Charge

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as speicfied and directed by Engr-in-charge

Supply only Chain link MS galvanisd fencing, any size or type complete all as speicfied and directed by Engr-in-charge

S&F,Round Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified by Engr-in-Charge

S&F 2Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed (each line wire to be measured)

S&F in repair mild steel, Fe 410-W (Gde E- 250 quality-A) Framed work as in doors or gates,roof structure of any size and section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing,including dismantling, complete all as specified by Engr-in-Charge

Excavation in trenches , n exc 1.5 m wide and n exc 1.5 m in depth for founddation , etc . or for shafts, wells, cesspits, manholes, pier holes , etc. n exc 10sq m on plan and n exc 1.5 m in depth and getting out for soft loose soil complete all as specified and as directed.

M&L for Reinforced cement concreteType B-0 1:2:4 , 12.5 graded aggragates, (Nominal mix) as in columns,pillar,piers etc.complete all as specified and as directed by Engr-in-Charge

S&F,TMT Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified by Engr-in-Charge

Ditto all as above but 5mm dia and over upto including 10mm dia in stirrups, spacers and binders,complete all as specified and as directed by Engr-in-Charge

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square or rectangular ,rough finished of surface of concrete, complete all as specified by Engr-in-Charge

M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cm 1:6,complete all as specified by Engr-in-Charge

M&L rendering 15mm thick in CM ( 1:4) on fair faces of brick work or concrete surface to be finished even & smooth without using extra cement.complete all as specified and as directed by Engr-in-Charge

M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of.complete all as specified and as directed by Engr-in-Charge