Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Eprocure
Opening Date20 Sep 2024
Closing Date17 Oct 2024
Tender Amount₹ 15,00,000
Costs
EMD
₹ 30,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_675508_1Bid Award Id
ViewTender No
8850/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed .
0.2
-
-
M&L Green Marble (approved pattern) work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) 20mm including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified and directed.
2
-
-
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed
155
-
-
M&L for non skid cramic tiles colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor and in skirting etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed
100
-
-
M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed
15
-
-
M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.
15
-
-
M&L for coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in CM 1:4, all as specified and directed
40
-
-
Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes all as specified and directed
1
-
-
M & L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified and directed.
1
-
-
Easing of door shutters, window shutters, wooden cupboard shutters, show case shutter drawers incl fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.
70
-
-
Petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, shower, concealed stop cock, low level flushing cistern , CPVC/GI pipe fittings incl replacing & providing of good quality rubber washer check nuts plunges ,taflon tape, M-seal, brass spindles (specific type), GI/ brass/CPVC fittings etc or any other minor accessories / repairs to make the system all time functional , ensure smooth water supply without any wastage and stop water leakage complete all as specified and directed.
100
-
-
Taking up or down pvc/ steel tubing of 20/25mm bore and connections complete all as specified and directed
30
-
-
S&F CPVC pipe 20mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed.
15
-
-
S&F CPVC pipe 25mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors with and incl clamps etc complete all as specified and directed.
15
-
-
Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed
15
-
-
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron or cpvc pipe and fixed complete all as specified and directed
1
-
-
S&F in repair 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
2
-
-
Dismantling of old broken water storage tank cap exc exc 250 ltrs and n exc 500 ltrs complete all as specified and directed
5
-
-
S&F rotational moulded polyethylene water storage tank 500 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed
5
-
-
S&F in repair PVC water tank cover (black/white) suitable for size 250 ltr to 500 ltr capacity etc complete all as specified and directed.
20
-
-
S&F in repairs 25mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed
10
-
-
S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specifed and directed.
5
-
-
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed.
2
-
-
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 incl flush pipe and making good to floor including removing rubbish all as specified and directed.
4
-
-
S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink length not less than 80cm upto floor trap complete all as specified and directed.
35
-
-
S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed.
15
-
-
S & F in repairs PVC flushing cistern valveless, syphonic action kit and washers type, 10 litres capacity with inlet, ball valve float and handle any make with exisiting fixed, complete all as specified and directed.
30
-
-
S&F in repair fancy type 15 mm bore Pillar cock tall height, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
15
-
-
S&F in repair 15mm bore fancy type CP bib tap long body, cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed.
60
-
-
S&F in repair CP two way bib tap 15mm dia complete all as specified and directed.
2
-
-
S&F in repair 15mm bore dia CP stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed
20
-
-
S&F in repair 15 mm bore CP Concealed Stop valves with long shank and cup fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe complete all as specified and directed
6
-
-
S&F in repairs brass chromium plated shower rose with swivel joint not less than 50mm dia and not less than 200mm long arm all as specified and directed.
20
-
-
S&F in repairs CP SS Soap dish premium quality, fixed to wall with plugs and screws complete all as specified and directed.
15
-
-
S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.
10
-
-
S&F in repairs PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed.
41
-
-
S&F in repair CP Health faucet( ABS Body) suitable for 15mm dia pipe with 1.25m long flexible steel tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified
5
-
-
Supply and fixing in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.
25
-
-
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including beding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx 460mm bowl size 410mm x 330mmx 160mm complete all as specified and directed
1
-
-
S&F in repair 600mmx450mm Looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed
30
-
-
Taking down and refixing Shutters in same opening after adjusting the size, of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed
20
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 2.0 sqm each complete all as specified and directed.
4
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed.
5
-
-
Taking down Shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed
31
-
-
M&L for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed
20
-
-
M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including plastering, painting and finishing the surfaces to match with existing surface complete all as specified and directed.
0.25
-
-
S&F 35mm thick second class hard wood factory made, plain framed panelled door shutter (any number of panels) with panel of 9mm thick BWP commercial plywood or 12mm thick veneered particle board medium dencity, wood partical board with commercial face veneers. The size of members of shutters shall be as specified in section 8 clause 8.20 (a) of SSR Part-I 1991 complete all as specified and directed
9
-
-
S&F 35mm thick second class hard wood factory made glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed
45
-
-
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
9
-
-
S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed.
24.5
-
-
S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.
10.8
-
-
Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered therein.
31
-
-
S & F 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.
125
-
-
S&F Aluminum tower bolts of extruded section of size 150mm all as specified and directed.
85
-
-
S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.
85
-
-
S&F 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
35
-
-
S&F double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed.
30
-
-
M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
115
-
-
M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed
7
-
-
S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and as directed .
15
-
-
S&F in repairs 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.
20
-
-
S&F in repairs Aluminum tower bolts of extruded section of size 150mm all as specified and directed.
20
-
-
S&F in repair 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.
30
-
-
S&F in repairs 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed
10
-
-
S&F in repairs double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters.
10
-
-
S&F in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed.
10
-
-
Dismantling boarding, any description, fixed in any position with screws etc complete complete all as specified and directed
100
-
-
S&F 16-17mm thick Prelaminated particle board, interior grade,but prelaminated both sides with decorative choice laminations, fixed to frame work complete all as specified and directed.
100
-
-
Extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed
300
-
-
S&F 2nd class hard wood plain fillet sq. rect and triangluar in section, wrought secured with sectional area exc 13 but n exc 25 sqcm complete all as specified and directed
25
-
-
S&F 75mm size Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed
22
-
-
S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed
75
-
-
S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple complete all as specified and directed.
40
-
-
S&F in repair SS kitchen plate rack made out of 1mm thick sheet of type SS 304 grade of size min 750x600mm of best quality of approved make complete all as specified and directed.
2
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
50
-
-
S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or in floor or fixed to walls.
10
-
-
S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint laid in trenches or floors or fixed to walls.
40
-
-
S&F 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door.
1
-
-
S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door.
2
-
-
S&F 75 mm bore PVC (SWR) bend in any radius.
2
-
-
S&F 110mm bore PVC (SWR) bend in any radius.
8
-
-
S&F 75 mm bore PVC (SWR) coupler in any radius.
2
-
-
S&F 110mm bore PVC (SWR) coupler in any radius.
8
-
-
S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified & as directed.
4
-
-
Material and labour for sunken floor treatment as follows:-
-
-
-
(i) Demolition of cement concrete in sunken floors incl. removing dubrish outside MD land complete all as specified and directed.
0.65
-
-
(ii) Brushing neat cement slurry with 3.0kg of cement per sq. metre mixed with WPC @ 3% by weight of cement as per manufacturer's instruction to fill all hole and crack complete all as specified and as directed. Note:- Water tightness testing should be done after 24 hours
6
-
-
(iii) Material and labour for PCC (1:1 1/2 :3) type A-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Note : Water proofing compound will be measured and paid separately.
0.2
-
-
(iv) Material and labour for plastering on vertical sides and top surface of CM (1:3) 15 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time. Note : Water proofing compound will be measured and paid separately.
6
-
-
(v) Material and labour for 2 coats of Dr. Fixit krystalline waterproofing coating compound shall be applied after laying sewage/ plumbing pipes with fixtures in position.
6
-
-
(vi) Material and labour for filling the sunken floor with PCC ( 1:5:10) type E-2 using brick aggregate over the treated surface.
0.5
-
-
(vii) Material and labour spouts of 50mm dia GI pipe light grade projecting 450mm clear of face outer wall with PVC mosquito proof cap on inner face of pipe shall be provided to drain out seepage water , if any.
1.5
-
-
Note : Water tightness testing should be done after applying Dr Fixit epoxy compound, by pounding water for 72 hours & rectify defects if any till total elimination of defect. Dubrish to be removed outside MD land.
-
-
-
Cleaning and removing all scale and dirt etc from tanks capacity exceeding 250 but not exceeding 500 litres each & from mouths of circulating pipes etc of service water/loft tanks in / over roof buildings at different locations of capacities as under: Note:
1. The contractor will write date of cleaning& next due date of cleaning on Tank as directed by the Engr-in-Charge.
2. At the time of cleaning disconnected pipes/fittings shall be reconnected as per existing to make it leak proof complete all as specified and directed.
38
-
-
Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified and directed.
50
-
-
Rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 using WPC finished even and smooth without using extra cement complete all as specified. Note: WPC shall be measured and paid separately under relevant item.
40
-
-
M&L for rendering 10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed
30
-
-
M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed.
40
-
-
M&L for preparing of newly plastered surface of walls and applying one layer of white putty 1-2 mm and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and directed.
20
-
-
Supply only integral water proofing compound of approved make complete all as specified and as directed
85
-
-
Demolition of cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: work has to be carried out on roof of G+2 building.
8.7
-
-
M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges using WPC of approved make as per manufacturers instruction all as specified and directed (WPC shall be measured and paid separately)
8.7
-
-
M&L for 10mm thick cement plaster over PCC in CM 1:3 finished even and smooth (without using extra cement) and using WPC of approved make per manufacturers instruction all as specified and directed (WPC shall be measured and paid separately)
250
-
-
M&L for preparation and cleaning of newly plastered surface and applying two coat of Dr fixit Roofseal classic as per following direction :- 1. Marking of 2 x 2 m area on roof surface 2. Apply Ist coat on ready surface in one direction using 1.5 ltr/ 4 sqm area 3. Apply 2nd coat using 1.0 ltr/ 4 sqm after 12 hrs in perpendicular direction of 1st coat application 4. Removal of all unwanted material and debris outside MD land.
250
-
-
Taking down carefully copper & aluminum point wiring for light, fan, socket or power complete and making good distrubuted surfaces of walls floors etc. Including switch & socket etc complete all as directed by EIC.
19
-
-
M & L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-
-
-
-
One light/ Exhaust/ Ceiling Fan point controlled by one way switch.
9
-
-
One 3 pin socket outlet 5 Amps on independent board.
4
-
-
One 3 pin socket outlet on same board.
3
-
-
One light point controlled by two way switch.
2
-
-
S & F in repair of modular switch single pole one way 6 Amps, ISI marked complete all as directed by EIC.
11
-
-
S & F in repair of modular Socket single pole one way 6 Amps, 2 module ISI marked complete all as directed by EIC.
7
-
-
S & F in repair of modular switch single pole two way 6 Amps, ISI marked complete all as directed by EIC.
4
-
-
S & F in repair White cover plate with frame, 2 module ISI marked complete all as directed by EIC
3
-
-
S & F in repair White cover plate with frame, 3 module ISI marked complete all as directed by EIC
5
-
-
S & F in repair White cover plate with frame, 6 module ISI marked complete all as directed by EIC
2
-
-
S & F in repair Metal flush box 3 module ISI marked complete all as directed by EIC
5
-
-
S & F in repair Metal flush box 6 module ISI marked complete all as directed by EIC
2
-
-
M & L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 4 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/ pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 4 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent.
6
-
-
S & F in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(AC Box) complete all as directed by EIC.
2
-
-
S & F of modular switch socket combination 16A (with gang box where is required), 6 pin, 3 module, ISI marked complete all as directed by EIC.
4
-
-
S & F in repair of switch piano type flush type single pole one way 5 Amps, ISI marked complete all as directed by EIC.
212
-
-
S & F in repair of socket outlet 5 pin flush 6 Amp multi pin 2/3 pin complete all as directed by EIC.
100
-
-
S & F in repair of switch socket combined outlet 6 pin flush 16 Amp multi, ISI marked complete all as directed by EIC.
32
-
-
S & F in repair of switch piano type/flush button type single pole two way 5 Amps front operated ISI marked complete all as directed by EIC.
12
-
-
S & F in repair of lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings complete all as directed by EIC.
10
-
-
S & F in repair of 3 pin plug top AC-230V, 6 Amp complete all as directed by EIC.
6
-
-
S & F in repair of 3 pin plug top AC-230V, 16 Amp complete all as directed by EIC.
8
-
-
S&F in repair ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and directed by Engr-in- charge.
8
-
-
S & F in repair of High lam sheet cover ISI marked with required Nos of space for switches/Sockets/Regulator of size 250x280mm complete all as directed by EIC.
4
-
-
S&F LED Building security light fitting 1x 25 W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core mutistrand copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided, all as directed by EIC.
4
-
-
Taking down existing U/S fittings any type any size and Supply & Fix LED 10 watt tube light fitting integrated type, (Length min 2 feet), 240 V, PF 0.90, colour temp 6500K, suitable for surface mounting on wall, multi stranded copper flexible cable 0.5 sqmm Two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as as directed by EIC.
20
-
-
S & F in repair incl taking down LED bulb 9 Watt with very high efficiency suited for installation in existing lamp holders, complete all as as directed by EIC.
20
-
-
S & F in repair 1 x 18 watt LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as directed by EIC.
212
-
-
Taking down carefully aluminium sub main wiring from the existing casing/caping/PVC conduit all as diretced.
340
-
-
Material & Labour for sub main wiring with two run of 10 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 10 sqmm size PVC insulated unsheathed stranded copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge..
40
-
-
Material & Labour for sub main wiring with two run of 6 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 6 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge.
120
-
-
Material & Labour for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge.
180
-
-
Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as directed by EIC.
4
-
-
S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, with 200 A rated bus bar, double door with 100 Amp,25 KA,TP MCCB as incomer (Vertical type double door,100 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCBsas outgoingscomplete all as directed by EIC:
1
-
-
S & F in repair of MCB TPN 40 to 63 Amps, 415 V with thimble suitable for existing wires complete all as directed by EIC.
4
-
-
S & F in repair incl taking down sheet metal enclosure for MCB DB, SPN 230 Volts 200 amps rated busbar 8 way double door complete all as directed by EIC.
2
-
-
S & F in repair of MCB single pole with neutral 240 volts 25 to 40 Amps with thimble suitable for existing wires complete all as directed by EIC.
8
-
-
S & F in repair of MCB single pole 6 to 32 Amps 240 V with thimble suitable for existing wires complete all as directed by EIC.
20
-
-
Taking down ceiling fan/Exhaust fans/Wall mounting fan of any cap/sweep after disconnecting the electric supply from any site and opening fans for repair/over hauling including removing dust and greasing, and cleaning of blades and fan with kerosene oil and checking of alignment of shaft, oiling including re-assembling, nut bolt checking and connecting/refixing of fans in its original position burnt out fan shall be kept separately for rewinding complete all as directed by EIC.
NOTE: Rewinding and replacement of defective parts shall be measured and paid seperately.
120
-
-
M&L,Rewinding ceiling fan of sweep 1200 mm/1400 mm with suitable gauge copper winding wire (super enamelled) including all insulating material after necessary heat varnishing testing etc. complete all as directed by EIC.
100
-
-
M&L,Rewinding Exhaust fan of sweep 250/300 mm with suitable gauge copper winding wire (super enamelled) including all insulating material after necessary heat varnishing testing etc. complete all as directed by EIC.
5
-
-
M&L,Rewinding Exhaust fan of sweep 380/450 mm with suitable gauge copper winding wire (super enamelled) including all insulating material after necessary heat varnishing testing etc. complete all as directed by EIC.
2
-
-
Note for Item No 137 to 139
1. Repairing/ rewinding of ceilling fan/ exhaust fan shall be carried out in the AGE E/M Dronachal subdivision in present of concern JE E/M.
2. Contractor shall detail the staff to collected defective fans from concern JE E/M, check the fans after opening it, and intimate the defects in the fan to JE E/M before carring out the repairs.
3. The bearing of fan should be of NBC/SKF make only. No other make will be accepted.
4. Contractor will be provided by stciker of each repairing fan with date and name of frms.
-
-
-
M & L for painting of following Item with two coats of DUCO paint (ISI grade) white using spray machine spray painting including cleaning, washing and preparation of old painted surfaces including MES Nos are Entered in all ceiling and Exhaust fan in site only, complete all as directed by Engr-in-Charge:-
Note:- (painting shall be carried out in E/M Yard)
-
-
-
Ceiling fan of 1200/1400 mm sweep complete.
5
-
-
Exhaust fan of 300/380/450 mm sweep with smoke grey.
2
-
-
Geyser 25 liter cap.
2
-
-
S & F in repair metal fan blade of any type and any size suitable for 1200 mm/ 1400 mm Ceiling fan complete all as specified and directed by Engineer-in-Charge.
1
-
-
S & F in repair metal fan blade of any type and any size suitable for exhaust fan of any capacity, of any make, complete all as specified and directed by Engineer-in-Charge.
-
-
-
250/ 300/450 mm sweep
5
-
-
S & F ceiling fan regulator stepped type ISI marked, complete all as specified and directed by Engr-in-charge
10
-
-
S & F ceilling Fan down rod of size 15 mm GI pipe medium grade(ISI mark) length upto 50cm including making holes, nut bolts, spilit pin washers etc complete all as directed by EIC..
4
-
-
Taking out and replacement of following accessories form ceiling fans taking down vide item No 3 here in before complete all as directed by EIC.
-
-
-
Bearing No 6201Make : SKF/NBC
105
-
-
Bearing No 6202 Make : SKF/NBC
107
-
-
Bearing No 6203 Make : SKF/NBC
2
-
-
Rubber Bush , nut, bolts ,washer and split pin etc as reqd at site suitable for ceiling fan
50
-
-
Condenser 2.5 mfd Make: Epcos/Tibcon
105
-
-
Condenser 4 mfd Make: Epcos/Tibcon
2
-
-
Ceiling fan shaft
15
-
-
Ceiling fan clamps
20
-
-
S&F ceiling fan canopy for suitable of 1200/1400 mm sweep complete
8
-
-
M&L for Fixing of Geyser in existing or new position by providing suitable size of anchor fastner and connecting PVC flexible inlet and outlet pipe complete all as directed by EIC.
3
-
-
M&L for repairs to defective/leakage of geyser 25/50 ltr capacity inner tank of copper/Steel by brazing, soldering, gas welding including testing for leak proof upto the satisfaction of the EIC complete all as directed by EIC.
3
-
-
S&F Gun metal half turn UPVC gate valve of 25mm dia and fixed in position after taking out unserviceable gate valve complete all as directed by EIC.
1
-
-
S&F Gun metal half turn UPVC gate valve of 20mm dia and fixed in position after taking out unserviceable gate valve complete all as directed by EIC.
2
-
-
Taking down and dismantling the outer cover of geyser of any capacity and removing the scaling including repairing and replacement of the inlet and out let pipe and re-assembling the same after testing complete all as directed by EIC.
2
-
-
Taking out and replacement of following unserviceable parts of Geyser :-
-
-
-
Inner tank stainless steel 25/50 ltrs cap ISI marked
1
-
-
Thermostat ISI marked
12
-
-
Triangle Heating element 1.5 KW/2 KW, ISI marked
13
-
-
Indicator lamp with flexibe copper wire of suitable size Red/Green
8
-
-
PVC Connection with steel reinforced pipe for hot water connection of Size 18" x 1/2" in approved make by GE.
2
-
-
S & F PVC insulated multi stranded Copper conductor, sheathed round cable ISI marked 1.5 sqmm x 3 core complete all as directed by EIC.
20
-
-
Replacement of burning wire of any size out of any type of existing TPN/SPN DBs including replacement of damaged PVC conduit with cement work complete .
Note: Wire, PVC conduit and cement work includeed in quoted rate.
2
-
-
M & L for sheet metal enclosure with socket and plug top single pole & neutral with a two pin & earth plug & socket complete with one MCB SP 20 amps, 240 volts complete all as directed by EIC.
5
-
-
Material & Labour for sub main wiring with two run of PVC insulated multi stranded copper conductor fire retardant cable 4 sqmm size (Nominal area) and one run of PVC insulated unsheathed solid core copper conductor cable 4 sqmm size in including PVC casing capping flat pipe of required size complete all as directed.
50
-
-
S & F Stator for Ceiling Fan 1200/1400 mm sweep complete all as directed by EIC.
4
-
-
S & F rotor for Ceiling Fan 1200/1400 mm sweep complete all as directed by EIC.
4
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements