Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date23 Dec 2024
Closing Date18 Jan 2025
Tender Amount₹ 1,49,54,000
Costs
EMD
₹ 2,25,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_689999_1Tender No
CWE/JHA/GWL/TOKEN/98 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M & L Supply mixing and appling a 1 Top Epoxy of, is a self-smoothing epoxy resin floor finish applied at 1 mm thickness over the Epoxy underaly. Notch shall be used to spread the mixed epoxy followed by the spike rolling to realese the entrapped air, the cured topping shall attain the following properties . complete as per the manufacturer instuction all as specified and directed.
1156
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed.
70
-
-
... More
Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube,suppling & fixing in opening as per specification & drawings complete all as specified and as directed.
70
-
-
... More
S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.
17
-
-
... More
S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified..
28
-
-
... More
S&F for aluminium anodised barrel tower bolts of extruded section of 200mm size, complete all as specified and directed.
28
-
-
... More
S&F100mm long Butt hinges, aluminium hinges complete all as specified
42
-
-
... More
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed
47
-
-
... More
Providing and fixing factory made uPVC white colour Sliding window Three track not exc.2.00 Sq.m each made of extruded profiles with wall thickness of 2.3mm (+- 0.2 mm ). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash ( 42mm x 67 mm). Slinding mesh Sash ( 42mm x 57 mm ) Sliding interlock ( One vertical length in each shutters) ( 45.5 mm x 28 mm ), Glazing beat ( 24.5 mm x 16 mm ) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket, 1.2+- 0.2 mm thick galvanised steel Frame ( 30 mm x 18 mm ) 2 nos, sliding sash (30 mm x 18mm), sliding mesh sash ( 26 x 10 mm ) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, ( Hardware : Touch Lock of zinc alloyed ( white powder coated), steel roller system. Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and required accessories.) Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
102
-
-
... More
S&F 4.8 mm thick tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed
102
-
-
... More
M&L Granite slab 16 to 18 mm thick machine cut, bedded and joined with grey cement slurry and pointed with white cement with admixture of pigment to match over and including 15 mm thick screed bed CM (1:6) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges all as specified and directed..
45
-
-
... More
M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
1
-
-
... More
M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone aggregate as levelling course/mass concrete complete all as spd and directed.
3
-
-
... More
Demolition of concrete of any description and in position not otherwise specially provided for and removing rubbish from site upto 1.5 km complete all as specified and as directed.
25
-
-
... More
Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and as directed.
1
-
-
... More
M&L, brick work with sub class ‘B’ bricks (old size), straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed
1
-
-
... More
M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.
1
-
-
... More
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down wih water, etc complete all as specified and as directed
465
-
-
... More
M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
400
-
-
... More
M & L two coat of oil bound distemper over a coat of 1mm thick wall care putty on plastered surfaces on wall incl. preparation of surfaces etc.
4000
-
-
... More
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
65
-
-
... More
M&L for preparation of the newly plastered surfaces of ceiling & applying 2 coats of white wash on ceiling surfaces complete all as specified and directed.
65
-
-
... More
Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed by Engineer -in-Charge.
50
-
-
... More
Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.
360
-
-
... More
M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.
301
-
-
... More
M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
60
-
-
... More
S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed.
28
-
-
... More
S&F for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair and complete all as specified and directed.
21
-
-
... More
S&F of vitreous china wash basin size 550 x 400mm Including waste coupling ,waste pipe,75 mm floor traps and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed.
7
-
-
... More
S&F for in repairs Heatth Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed.
7
-
-
... More
S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.
7
-
-
... More
S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.
7
-
-
... More
S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.
7
-
-
... More
Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.
21
-
-
... More
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.
7
-
-
... More
S&F in repairs Soap dish of CP fixed with pvc rawal plugs and screw complete all as specified and directed.
7
-
-
... More
S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.
7
-
-
... More
S & F in repair Peg set of six S.S. fixed to wall with PVC plugs and screw complete.
7
-
-
... More
S & F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete specified and diected by engineer in charge.
270
-
-
... More
S&F 5mm thick, 600 x 600mm rounded edge mirror of selected quality glass, with back polishig mounted and fixed with stainless steel decorative cap wahsers and screws set fixed on PVC rawl plugs complete all as specified and directed.
7
-
-
... More
S &F for shower rose brass chromium plated with swivel joints, 125 mm in size including fixing to steel pipe complete all as specified and directed .
7
-
-
... More
S &F for Brass CP WHB mixer for hot and cold water screwed down for 15 mm bore iron pipe complete all as specified and directed.
7
-
-
... More
S &F for Wall mixer with two in one pattern in of brass CP 15mm dia, complete all as specified and directed.
7
-
-
... More
Taking up or down steel tubing and connetion including or removing from site of 15mm bore of pipe.
30
-
-
... More
Taking up or down steel tubing and connection including or removing from site of 20mm bore of pipe.
20
-
-
... More
Taking up or down steel tubing and connetion including or removing from site of 25mm bore of pipe.
20
-
-
... More
Supply and fixing 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .including All fitting Brass
30
-
-
... More
Supply and fixing 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .including All fiting Brass
20
-
-
... More
Supply and fixing 32 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .including All fitting Brass
20
-
-
... More
S&F in Repair grating square 150 mm size of PTMT. (Minimum weight 100 gms)
21
-
-
... More
Demolition and breaking up drain pipes ( salt glazed ware, AC or Reinforced concrete) set in cement mortar and removing from site complete
156
-
-
... More
S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all specified.
78
-
-
... More
S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls.complete all as specified .
70
-
-
... More
S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified .
8
-
-
... More
S&F for 110mm dia PVC(SWR)pipes bends any radious, complete all as specified and directed.
9
-
-
... More
S&F for 75 mm dia PVC(SWR)pipes bends any radious.complete, complete all as specified and directed.
9
-
-
... More
S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.complete all as specified and directed.
8
-
-
... More
S&F 75mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete.
6
-
-
... More
M & L 75 mm dia of out let PVC (SWR) floor trap plain with CP grating incl. jointing with solvent cement as in repair complete all as specified and as directed.
6
-
-
... More
M & L PVC (SWR) gully trap 125 /100 plain with CP grating incl. jointing with solvent cement as in repair complete all as specified and as directed.
6
-
-
... More
S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.
6
-
-
... More
M&L for sand blasting work for stone cleaning this process consists of exposing the surface of natural stone to a sand blast of sliceous sand which have the speed of the pressure is between 50 to 90 psi (pounds per square inch) the flow rate speed and pressure of the abrasive element can be calibrated according to remove rust and dirt or deposites and contaminants.(work to be executed 15 to 20 m hight and no extra payment made on this account)
2300
-
-
... More
M&L for repointing of the stone masonry joints with the mixture joint with the mixture of quick lime and wafer thin sand the mixture is used to fill the damaged and poen spaces which is caused by the time and rain water repointing helps to keep building dry. It absorbes the rainwater hit to the building observe by the stone and mortar joints to prevent problem occuring this needs to be able to escape back to the atmosphere once its stop raining that's repointing is necessary to prevent damage due to the crystallisation of solube salts.(work to be executed 15 to 20 m hight and no extra payment made on this account)
568
-
-
... More
M&L for water repellent coatin the purpose of a water repellent coating should be minimize water intrusion through the outer surface of the stone or mortar while allowing sufficient vapor transmission to let moisture out as the wall cravity thereby improving weathering qualities and the ability to easily clean the surface if it becomes dirty proper application of water repellent can minimize efflorense, mildew,staining and dirt.(work to be executed 15 to 20 m hight and no extra payment made on this account)
2300
-
-
... More
M & L for 5mm thick Epoxy-Polyurethane based floor coating system including surface preparation by clearing from dust, muck moisture & all foreign material and cleaned by mechanical scrubber/grider, chemical treatment for oil if required followed by application of primer Cipoxy 61 which shall be a two component, solvent free, epoxy polyamido amine system having a volumetric ratio of mixing of 2.5: 1 to yield a thickness of 200 microns then providing and applying the screed layer with Cipoxy 18 of minimum thickness of 3600 microns. The self levelling screed shall consist of a low viscous epoxy-amine cured system and graded aggregates (Special Silica). The epoxy system shall have a volumetric ratio of mixing of resin in 1:1 ratio. The aggregates shall be added om the rate of 1:1:3.5 over that Sealer coat of Cipoxy 18 to a thickness of 100 micron and finally Epoxy Polyurethane top coat of Cipothane SL 1000 which is 4 component top coat consists Resin, Hardner, aggregate,EPI, material to be mixed to agitate the mixture by an electrically driven motor and lay the mixture to the thickness of 1000 microns + PU based UV Resistant top coat to a thickness of 200 microns as per design provided by user complete all as specified and directed.
1205
-
-
... More
M&L complete removal of exiting treatment from external wall preparation of old plastered surface and applying two coat of premium acrylic exterior anti algal fungal emulsion paint with silicon additives @ 1.43litre/ 10 Sqm over one coat of weather coat exterier primer on wall all of height up to 10 M complete all as specified and directed. Note: necassary scoffolding & precoustion measure deep to included in quoted rate by contractor.(no extra payment made to contractor on this work)
130
-
-
... More
Supply & Fix 24 watt Round shape architectural Dynamic RGBW (W=4000K) LED inground walkover up-light made of Die Cast aluminium heat sink. The luminaire shall have powder coating finish with stainless steel top framing for anti rust. The luminaire shall have proper IP67 protection. The fixture shall have 15° beam angle with toughned glass cover with high purity integrated lens. The LEDs shall have minimum CRI ≥80 for white light . The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 24W .Fixture should be operated with 24V DC external driver for ease of maintenance. Fixture shall be specially designed and able to sustain the operating temperature range of 0°C to 45°C . The luminaire shall have declared life of 50,000 burning hours .The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. Following certifications/reports to be submitted: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer and type test reports with BIS certificate.Fixture, driver and other accesories should be of same make and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
36
-
-
... More
Supply & Fix 150 W LED Driver shall be Isolated type, Constant Voltage topology driver in metal encapsulated with IP 66 Protection. Output voltage 24 Volt DC Driver efficiency should be 85% & proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 5KV internal surge protection with THD10% and PF=0.9.LED Driver should be of same make as LED light fixture LED driver shall have output short circuit & over voltage protection inbuilt and and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
40
-
-
... More
Supply & Fix IP67 5 Core T type connector complete all as specified and directed.
40
-
-
... More
Supply & Fix IP67 5 Core S type connector complete all as specified and directed.
40
-
-
... More
Supply and Fix 24 watt Circular shape architectural throw adjustable Dynamic RGBW LED flood light with housing made of Die-cast aluminium. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have proper IP66 protection IK08 protection. The fixture shall have 15 degree beam angle the lens shall be made of anti-aging & anti UV-PMMA / PC material should be IK08 rated. The LEDs shall have minimum CRI ≥80 for white light .The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 24W . Fixture should be operated with 24V IP66 DC driver for ease of maintenance. Fixture shall be specially designed and able to sustain the operating temperature range of 0°C to 45°C . The luminaire shall have declared life of 50,000 burning hours at L70.The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder The luminaire shall have class I insulation.Luminaire driver should be of same make. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours.LED Fixture should be BIS approved and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
64
-
-
... More
Supply of 24 Watt RGBW Linear LED Wall washer with Length of fixture should be 1000mm (+/-5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage. The Luminaire should have multiple beam options of 15/30/60/15X60 to be used as per design intent/requirement.Luminaire should have integrated Brackets for mounting and aiming. The luminaire should have loop in loop out provision for power and DMX Signal. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC , with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
20
-
-
... More
Supply of 72W RGBW Linear LED Wall washer with Length of fixture should be 1000mm (+/-5mm). Fixture shall be made up of Extruded Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage. The Luminaire should have multiple beam options of 15/30/60/15X60 to be used as per design intent/requirement.Luminaire should have integrated Brackets for mounting and aiming. The luminaire should have loop in loop out provision for power and DMX Signal. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC , with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
16
-
-
... More
Supply of 240 W LED Driver shall be Isolated type, Constant Voltage topology driver in metal encapsulated with IP 66 Protection. Output voltage 24Vdc Driver efficiency should be 85% & proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 5KV internal surge protection with THD10% and PF=0.9.LED Driver should be of same make as LED light fixture LED driver shall have output short circuit & over voltage protection inbuilt and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
9
-
-
... More
Supply and Fix 18 Watt Circular shape architectural throw adjustable Dynamic RGBW LED flood light with housing made of Die-cast aluminium. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have proper IP66 protection IK08 protection. The fixture shall have 15 degree beam angle the lens shall be made of anti-aging & anti UV-PMMA / PC material should be IK08 rated. The LEDs shall have minimum CRI ≥80 for white light .The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage 18W . Fixture should be operated with 24V IP66 DC driver for ease of maintenance. Fixture shall be specially designed and able to sustain the operating temperature range of 0°C to 45°C . The luminaire shall have declared life of 50,000 burning hours at L70.The luminaire should have loop in loop out provision for power and DMX Signal.Luminaire shall have 4 DMX channel with Integrated DMX decoder The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours.LED Fixture should be BIS approved and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
6
-
-
... More
Supply and Fix 120W RGBW LED Flood light . Fixture shall be made up of Aluminum Housing for better heat decapitation having IP66 Dust and Water Protection for Outdoor usage. The Luminaire should have multiple beam options of 15/30/60/90 to be used as per design requirement. The luminaire should have loop in loop out provision for power and DMX Signal. Luminaire shall have 4 DMX channel with Integrated DMX decoder. Luminaire should be capable of operating at 24VDC , with External IP66 24Vdc Driver. Luminaire and Driver should be Made in India. Luminare, Driver and controller should be with same make and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
6
-
-
... More
Supply & Fix IP67 2 Core S type connector complete all as specified and directed.
1
-
-
... More
Supply and Fix 5Mtr long flexible RGBW LED PU Coated Strip with IP68 protection suitable for outdoor applications. Strip should have 10W-15W per meter. The LED shall be compliant with Useful L70 life of 35000 Hrs. The LEDs used should be with RGBW CCT, the Fixture should be Dotless Homogenous Light source with Diffused optics and Diffuser should the part of LED Strip Light with Mounting clamps or channel and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
10
-
-
... More
Supply and Fix DMX Decoder complete all as specified and directed.
5
-
-
... More
S & F Blue color spike light with aluminum housing, suitable for outdoor use, luminaire should be IP65. Dimension of the luminaire should be 100x75x75 mm. Luminaire should not be less than 7 W and lumen pack should not be lesser than 350 lumens Note:- All Blue color spike Light fixing accessories like driver, connector,Mounting clip,wire and S&F LED master controller for facade lighting project and make structure for stand the facade light etc included in quated rate as per specified & directed by engr-in-charge
11
-
-
... More
Supply and Fix Lighting playback controller with minimum following specifications: • DMX Output- 1024 (2x512, 2Uni.) channels • Input Ethernet (RJ45, DHCP or static IP), USB-C • Networks Ethernet, Internet, WIFI compatible when connected to a router • Multiple Zone 10 Zone, play 10 scene/sequence per time in Stand Alone • Memory o Micro SD Card ( max. 256 GB ) o 8Mb Internal memory (No SD required) • Stand Alone options o Art-Net and sACN from SD card, including triggers (4x512) o Master / Save Synchro (32 max wired / 128 max Ethernet) o Commands from the Contacts (speed, scene, dimmer, zone) o Default start scene, Scene priority, Cross Fade time between scenes o Automatic Scene Recovery if the power is cut off and 16-bit and fine channel management • Triggers options o RS232 In/Out (16 characters max for RS232 triggers, commands or orders) o UDP / Ethernet triggers and commands (from SDK) o Real Time Clock and calendar for each scene (Hour, Day, Week, Month, Year) o Lighting Palyback controller should be of same make as LED Fixtures. and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
1
-
-
... More
Supply and Fix Amplifier/Splitter with 6-output DMX splitter with DMX signal boosting. This unit takes the incoming DMX signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6X32. Power consumption should not be more than 5W. The Compact signal amplifier shall support optically/magnetic isolation protection, protects the controllers and ensures that the DMX signal can be normally transmitted to various luminaires, improving the reliability and stability of the entire control system. The controller shall be compact in size & shall be minimum IP20 rated. Amplifier should be able to amplify the signal for up to 200m.The amplifier shall have male-female XLR connectors. On the input & output side the amplifier shall have cable with IP67 6-Pole XLR connector Housing - MS/Aluminum The output terminals are optically isolated from the input and share a common ground reference. All six output ports have an independent output driver and ELV transformer to boost the DMX signal. 1: 6 Way DMX Splitter/Booster ,Optically isolated DMX Input/Outputs Individual coil transformer for each output ,Splitter should be of same make as LED light fixture and should be BIS approved. Surface/Rack/Floor/Celling mountable with provide mounting accessories Refined and filtered data Cable 3 core 0.75sq.mm cable and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
3
-
-
... More
Supply and Fix WL-Button 6 Flush-mounting wall panel 6 dry Button panel with a 16 port connection. Button system should have trigger to control light with responsive, reactive programming.Keypad should be of same make as LED light fixture and should be BIS approved and All accessories like 5 Core DMX Cable,9841 Multipair Cable, XLR Pins, box for DMX ,extra driver, steel structure for flood light ,etc provide by contractor without any extra cost complete all as specified and directed.
1
-
-
... More
Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.
356
-
-
... More
Taking down ceiling fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge.
32
-
-
... More
Taking down old submain wiring any size,complete all as specified and directed by Engr-In-Charge.
2910
-
-
... More
Taking down old LT panel board complete, all as specified and directed by Engr-In-Charge.
6
-
-
... More
Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.
58
-
-
... More
Taking down unserviceable TPN DB/ with MCB's of any make/capacity, complete, all as specified and directed by Engr-In-Charge.
24
-
-
... More
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site.
24
-
-
... More
S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
20
-
-
... More
S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
38
-
-
... More
S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.
58
-
-
... More
S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.
548
-
-
... More
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and including non metallic rigid PVC casing caping (ISI marked with valid CML No) not less than 25 mm thick with all fitting & fixing accessories including one run single core PVC casing caping insulated unsheathed 2.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and casing caping shall be measured as one unit
1050
-
-
... More
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC casing caping (ISI marked with valid CML No) not less than 25 mm thick with all fitting & fixing accessories including one run single core PVC casing caping insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and casing caping shall be measured as one unit
1050
-
-
... More
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC casing caping (ISI marked with valid CML No) not less than 25 mm thick with all fitting & fixing accessories including one run single core PVC casing caping insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and casing caping shall be measured as one unit
970
-
-
... More
Supply, installing, testing and commissioning of LT panel board 415 Volts, 4 wire, 3 phase factory fabricated powder coated, cubical, weather and vermin proof outdoor kiosk type, front opening, floor mounted made out of 3.15 mm thick CRCA sheet of size suitable for mounting the its accessories with electrolyte connection of the equipment/accesories to be fixed, cable glands, lugs, mounted on steel angles supports of suitable size with grouting 4 Nos supports in PCC 1:2:4 type B1 complete with separate compartment for housing with proper arrangement for air circulation and including the following accessories all as specified and directed.
(a) Electrolytic copper bus bar 250 Amps in distant colour with epoxy supported insulators - 01 Job (04 Nos).
(b) MCCB 4 pole, 160 Amps, 415 Volts, rupturing capacity 36 KA - 01 No (incoming)
(c) MCCB 4 pole, 100 Amps, 415 Volts - 02 Nos (Outgoing)
(d) Volt meter analog type 0 to 500 volts with selector switch - 01 No
(e) Ammeter analog type 0 to 100 Amps with CTs & selector switch - 01 No
(f) Phase indication lamp LED type ( set of three ) - 01 set
(g) On load change over switch, 415V, 4 pole of capacity 160 Amps.
6
-
-
... More
M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including modular plastic laminated sheet and cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete
-
-
-
... More
One light point controlled by one switch.
192
-
-
... More
One Ceiling fan point controlled by one switch.
32
-
-
... More
One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.
50
-
-
... More
One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.
50
-
-
... More
Description all as per item No 102 above but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.
32
-
-
... More
S&F switch piano, modular one module flush button single pole one way 5 Amp complete all as specified and directed.
324
-
-
... More
S&F socket out let, modular two module multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.
100
-
-
... More
S&F switch piano, modular one module flush button single pole one way 15 Amp complete all as specified and directed.
32
-
-
... More
S&F socket out let modular two module multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.
32
-
-
... More
S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
128
-
-
... More
S&F electronic step rotary type modular fan regulator two module of 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.
32
-
-
... More
S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete.
96
-
-
... More
S&F LED Lamp 09/10 watt complete with 5 star rating complete all as specified and directed.
96
-
-
... More
S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt,4000k to 6500K fitting incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.
96
-
-
... More
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%