Military Engineer Services Tender
... More
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date27 Jan 2025
Closing Date24 Feb 2025
Tender Amount₹ 38,90,000
Costs
EMD
₹ 77,800Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_694996_1Bid Award Id
ViewTender No
GE(MCTE)/MHOW/74(T) OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dismantling boarding of any description fixed in any position with screws ,complete all as specified and as directed.
25
-
-
... More
Demolition of stone, brick masonry built in cement mortar incl quoins, arches, complete all as specified and as directed.
7.5
-
-
... More
M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 ,complete all as specified and as directed.
7.5
-
-
... More
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
8
-
-
... More
S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing complete all as specified and directed.
40
-
-
... More
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on bothfaces i.e front face & back face with particle board core to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2020 complete all as specified and directed.
10
-
-
... More
S&F Pressed steel door frames of size 125 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etccomplete all as specified and directed.
105
-
-
... More
S&FPressed steel door frames of size 105 x 60mm, made of 1.25mm thick sheet, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
105
-
-
... More
S&F Factory made, 35mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
78
-
-
... More
S&F Factory made, 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauge etc. (without sash bars) edges or framing plain, chamfered or rounded fitted with cut or mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I section 8.20 (a), complete all as specified and directed.
42
-
-
... More
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; complete all as specified and directed.
25
-
-
... More
M&L for PCC 1:3:6 Type C1 (20mm graded aggregate) as in bed block for holdfast and filling door frame complete all as specified and directed.
0.6
-
-
... More
S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
24
-
-
... More
S&F 250mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
4
-
-
... More
S&F 100mm size of Butt hinges, medium weight cold rolled mild steel complete door, complete all as specified and directed.
220
-
-
... More
S&F aluminium anodised barrel tower bolts of extruded section with 100mm long bolt, complete all as specified and directed.
32
-
-
... More
S&F aluminium anodised barrel tower bolts of extruded section with 200mm long bolt, complete all as specified and directed.
56
-
-
... More
S&F aluminium anodised barrel tower bolts of extruded section with 150mm long bolt, complete all as specified and directed.
56
-
-
... More
S&F extruded aluminium alloy handles fabricated type anodised 150mm size complete all as specified and directed.
112
-
-
... More
S&F extruded aluminium alloy handles fabricated type anodised 100mm size complete all as specified and directed.
64
-
-
... More
M&L for floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, 140mm long, fixed in floor complete all as specified and directed.
20
-
-
... More
S&F hasp and staple 125mm, safety type, aluminium anodised with alu hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed.
8
-
-
... More
M&L for preparation of new steel or iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
80
-
-
... More
M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of filler coat with grey filler or liquid wood filler, transparent, and bringing forward surfaces to smooth even finish, complete all as specified and directed.
200
-
-
... More
M&L for stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed.
40
-
-
... More
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
180
-
-
... More
S&F powder coated anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and directed.
35
-
-
... More
M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and directed.
400
-
-
... More
M&L for 4mm thick sheet glass ordinary quality in panes exec 0.5 sqm each fixed with & including rubber gasket in alu frame work complete all as specified and directed.
40
-
-
... More
S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
150
-
-
... More
S& F 18mm thick factory made PVC sheet one side pre laminated sheet kitchen cabinet shutter/ cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for making edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bodning etc complete all as specified and directed.
185
-
-
... More
S&F factory made PVC shelf/ partition of required size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provide 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the fronth of the self/ partition to be edge lipped by 18mm width x 1mm thick PVC sheet of density 600kg/ cum manufactured by ISO 9001-2015 Certified company using solvent cement etc complete all as specified and directed.
145
-
-
... More
S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed.
150
-
-
... More
S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed.
60
-
-
... More
S& F 100mm size MS mat/ glossy finish handle complete all as specified and directed.
120
-
-
... More
S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00mm) of any shape withside sliding roller clip and silding rails on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed.
8
-
-
... More
All as per item No.39 above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed.
8
-
-
... More
All as per item No.39 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed.
8
-
-
... More
All as per item No.39 above but grain basket size 20 x 17 x 6 inchescomplete all as specified and directed.
8
-
-
... More
All as per item No.39 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed.
8
-
-
... More
All as per item No.39 above but plain basket size 20 x 17 x 8 inches complete all as specified and directed.
8
-
-
... More
S&F 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
20
-
-
... More
S&F repair stainless steel curtain rod with brackets 25mm dia including necesary SS clamp complete all as specified and directed.
120
-
-
... More
Demolition of cement concrete (including floor tiles, kota stone flooring etc) (un-reinforced) of any description and in any position not otherwise specifically provided for incl remoal the demolised materials to a distance exc 50 mtr and not exc 100 mtr complete all as specified and directed.
8
-
-
... More
M&L for 75mm thick cement concrete 1:3:6, type C1, with using 20mm graded stone aggregate in floor/ plinth protection, finish the surface even and smooth without using extra cement including forming constructions joints and filling the same with bitumen filler complete as specified and directed.
70
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles.complete all as specified and directed.
635
-
-
... More
M&L for scratch free, double charged, vitrified ceramic tiles 9 to 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
320
-
-
... More
M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
60
-
-
... More
M&L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified and directed.
45
-
-
... More
M&L for Glazed Coloured ceramic tiles (textured and designed as required) in vertical surfaces size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat in CM 1:3 complete all as specified and directed.
160
-
-
... More
M&L for machine cut kota stone slab flooring 20-25mm thick laid over and including 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing with bees wax polish complete all as specified and directed.
25
-
-
... More
Mirror polish on kota stone wherever required to give high glossy finish complete all as specified and directed.
10
-
-
... More
All as per item No.54 here in before but in skirtings complete all as specified and directed
5
-
-
... More
M&L for granite slabs 20mm thick machine cut bedded laid over cement screed 15mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl grinding moulding rounding chamfering and polishing complete all as specified.
25
-
-
... More
Rounding to edges of stone slab slab one edge such as in steps, cooking platform, and other similar situation complete all as specified.
50
-
-
... More
S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.
8
-
-
... More
S&F Plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
8
-
-
... More
S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed.
4
-
-
... More
S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.
12
-
-
... More
S&F Vitreous China wash basin, angle back, size 550 x 400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
8
-
-
... More
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
35
-
-
... More
S&F in repair 25mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed complete all as specified and directed.
8
-
-
... More
S&F in repair 20mm dia Gun-metal, golbe or gate valves, with iron wheel head, screwd both ends or iron pipe and fixed ,complete all as specified and directed
8
-
-
... More
S&F angular stop valves, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
8
-
-
... More
S&F Long body CP Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
8
-
-
... More
S&F Bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
12
-
-
... More
S&F Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
8
-
-
... More
S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and directed.
8
-
-
... More
S&F chromium plated shower roses 125mm sizes with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
8
-
-
... More
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
8
-
-
... More
S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
12
-
-
... More
S&F PVC mirror cabinet complete all as specified and directed
8
-
-
... More
M&L for Health faucet (ABS Bpdy) mild steel chromium plated suitable for 15mm dia pipe 1.25 M long flexible tube and ABS wall Hook including making connection and fixed in position complete all as specified and directed.
8
-
-
... More
Taking down old GI tubing ISI marked medium grade 15mm bore with all fittings including connection etc, complete all as specified.
60
-
-
... More
Taking down old GI tubing ISI marked medium grade 20mm bore with all fittings including connection etc, complete all as specified.
20
-
-
... More
Taking down old GI tubing ISI marked medium grade 25mm bore with all fittings including connection etc, complete all as specified.
20
-
-
... More
Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.
60
-
-
... More
Supply and laying of CPVC brass elbow 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed
20
-
-
... More
Supply and laying of CPVC brass Tee 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed
20
-
-
... More
Supply and laying of CPVC brass Male brass Adeptor (MTA/ MBTA) 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed
8
-
-
... More
Supply and laying of CPVC Ball valve 20mm dia SDR-11 on wall/ ceiling or laying in floor complete all as specified and directed
8
-
-
... More
M&L for GI tubing ISI marked medium grade 20mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified.
20
-
-
... More
M&L for GI tubing ISI marked medium grade 25mm bore with all fittings and fixed complete to walls and ceiling or laid under floor including connection etc, complete all as specified.
20
-
-
... More
Cutting chases for concealed water tubing in brick wall and making good in CM 1:3 cutting n.exc 10cm girth.
30
-
-
... More
S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 1000 Ltrs incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float including removing the existing one complete all as specified and directed.
4
-
-
... More
S&F in repairs incl hoisting HDPE plastic water cylindrical vertical type tanks closed top of capacity 500 Ltrs incl 20mm bore brass stop cock and 20mm bore brass float valve with polythene float including removing the existing one complete all as specified and directed.
4
-
-
... More
S&F SS Sinks with drainage board in repair made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm and including waste pipe complete all as specified and directed.
4
-
-
... More
M&L for steel plate rack of size 900 x 750 x 250 made up of 1mm thick steel complete all as specified and directed.
4
-
-
... More
S&F in repair CP Toilet paper holder, complete all as specified and directed.
8
-
-
... More
S & F in repairs PVC (SWR) Floor trap/ Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and directed.
16
-
-
... More
S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.
13
-
-
... More
S & F in repair 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
4
-
-
... More
S & F in repair 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
2
-
-
... More
S & F in repair 75mm bore PVC (SWR) vent cowl complete all as specified and directed.
2
-
-
... More
S & F in repair 110mm bore PVC (SWR) bend any radius complete all as specified and directed.
4
-
-
... More
S & F in repair 110mm bore PVC (SWR) bend with acess door complete all as specified and directed.
4
-
-
... More
S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed.
13
-
-
... More
S & F in repair 75mm bore PVC (SWR) bend any radius complete all as specified and directed.
4
-
-
... More
S & F in repair 75mm bore PVC (SWR) bend with acess door complete all as specified and directed.
4
-
-
... More
S & F in repair 75mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
4
-
-
... More
Dismantling of cast iron/ PVC pipes jointed in cement mortar 110/ 75mm bore complete all as specified and directed
26
-
-
... More
S&F 75mm PVC reducers PVC (SWR) ,complete all as specified and directed
4
-
-
... More
S&F 110mm PVC reducers PVC (SWR) ,complete all as specified and directed
4
-
-
... More
S& F in repair 40mm Bottle trap of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms/ 40mm-270 gms) ,complete all as specified and directed
8
-
-
... More
S&F in repair Waste coupling of 40mm dia PTMT (half or full threaded). (Minimum weight 32mm-45gms/ 40mm-60 gms) fixed in repair complete all as specified and directed.
8
-
-
... More
S&F PVC waste pipe fixed to any type of coupling of 40mm threaded complete all as specified and directed.
8
-
-
... More
M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B-1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed
4
-
-
... More
S&F in repair CP WHB mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.
8
-
-
... More
Taking down cement plaster any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
720
-
-
... More
M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even and smooth without using extra cement, all as specified.
230
-
-
... More
M&L for rendering 15mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement all as specified incl mixing with water proofing compound (WPC shall be measured and paid separately) complete all as specified and directed
300
-
-
... More
M&L for 10mm thick cement plaster in cement mortar 1:3 on brick or concrete surface etc. on in ceiling finished even and smooth without using extra cement, all as specified.
190
-
-
... More
M&L for complete removal of existing treatment and preparation of old surfaces and applying two coat Acrylic emulsion with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed.
(Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means)
540
-
-
... More
M&L for preparation of newly plastered surfaces and applying two coat Acrylic emulsion with roller over applying minimum 1mm thick white wall care putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and directed.
(Note:- Contractor shall furnish gaurantee of four year against service rendered) (Note:- primer and emulsion paint shall be carred out through air less spray machine (Mechanical means)
300
-
-
... More
Complete removal of Existing tretment on ceiling surfaces including washing rubbingdown and stopping of distempered and painted surfaces complete all as specified and directed.
355
-
-
... More
M&L for preparing new plastered surface of ceiling surface and applying three coats of white wash etc complete all as specified and directed
190
-
-
... More
M&L for preparing old plastered surface of ceiling and applying two coat of white wash etc complete all as specified and directed.
358
-
-
... More
M&L for complete removal of existing treament and preparation of wall, washing, scrubbing down and stopping old treatment and painted surface of plastered/ decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all a specified and as directed.
(Note:- painting will be done by brush/ spray/ roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note:- Rate shall be included for necessary scaffolding and safety measures where required at site)
550
-
-
... More
M&L for newly plastered/ decorated surface and applying two coat of Premium Acrylic smooth exterior paint and including priming coat of exterior primer and incl one coat of wall putty complete all as specified and directed. (Note:- painting will be done by brush/ spray/ roller of building upto the height G+3) all as per directed by Engr -in-Charge) (Note:- Rate shall be included for necessary scaffolding and safety measures where required at site)
300
-
-
... More
Supply only liquid water proofing compound , complete all as specified and directed.
8.12
-
-
... More
M & L for cutting holes in brick walls built in cement mortar at the starting point of down take soil/ waste pipe at any floor, fill the joint of down take pipe & trap with thick mortar in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified and directed.
20
-
-
... More
Dismantling of plain or corrugated steel sheeting any gauge, thickness, including nainaital or similar pattern roof coverings.
80
-
-
... More
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.
300
-
-
... More
S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
80
-
-
... More
Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed.
0.5
-
-
... More
Formwork to sides and soffits of coping beam finished surfases fair, complete all as specified and directed
8
-
-
... More
M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
25
-
-
... More
M&L for RCC 1:2:4 type B1 (20mm graded aggregate) as in Chajjas & roof slabs complete all as specified and directed.
0.5
-
-
... More
M&L for taking down existing waterproof treatment of tar felt of any description from roof surface and removing rubbish to a distance not exec 100 mtrs complete all as specified and directed.
350
-
-
... More
M&L for PCC 25mm thick (1:2:4) type B0 using 12mm graded stone aggregate mixed with integral waterproof chemicals PIDI PROOF -LW mixed in proportion of 200ML/ 50KG cement of DR fixit of piddilite industries Ltd of STP No 1 (Liquid) of STP Ltd inproportion 200ML/ 50Kg cement as in padding on roof surface for correcting/ making proper slope on roof/ chajja and roof kerbs/ benching complete all as specified and directed.
20
-
-
... More
M & L for rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing compound while concrete surface is green and finish the surface even and smooth without using extra cement all as specified and directed (WPC shall be measured and paid separately under respective item).
90
-
-
... More
M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete all as specified and directed
90
-
-
... More
M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid separately).
90
-
-
... More
M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) land on primed surface by forced application complete all as specified and directed. Note:- Application of APP membrane must be done by authorized applicator of membrane manufacturer.
90
-
-
... More
M&L for water proofing on roof/ parapert with the following steps:-
Step - I : SurfacePreparation:
All loose and de-bonded concrete/ screed, loose particles, dirt & should be removed. Roof substrate must be pressure-washed with water with, a minimum working pressure of 1,400 psi is to be used to and/ or remove all dirt, dust, chalking and waster products. Remove algae,mold by using bleach solution or biowash.
Step - II : CrackRepair:
All visible hairline cracks on concrete roof screed more than 0.50mm and not giving hollow sound,should be cut and widenin V shape with mechanical cutter in the size (10mm W x 6mm D). Apply a coat of (Dr. Fixit Pidiprime A/ Equivalent make) on the well-prepared groove; allow the coat to dry for 30 minutes before application of (Dr.Fixit PU/ equivalent) seal and withsuitable gun. Allow sealant to cure a minimum 72 hours.
Step - III : ScreedRepair:
Remove loose and damaged concrete roof screed in pockets with mechanical cutter. Clean the concrete screed with high pressure water jetto remove dirt and loose particles. Brush apply abondcoat of (Dr.Fixit Pidicrete URP mix/ equivalent) in the ratio of 1:1 (URP 1: Cement 1) by volume to makeit lump free slurry when applied on in the pre wet surface. Laid to fall roofscreed in correct slope and gradient. Mix Dr. Fixit Pidicrete URP 10%/ equivalent byweight of cement in (M20) concrete in ratio of 1:1.5:3 i.e., one bag of 50kgcements: 1.5 times volume of sand: 3 times volume of aggregates: 25Lwater. Level the repair mortar and finish with trowel. Moist cure should bedone for 7days. Air cure screed for 7days, before application of roof top coat coating system
Step - IV : Rain water outlets treatment Hacking and chipping the surface around the rainwater drain outlet up to 25mm in depth. Apply bond coat of Dr.Fixit Pidicrete URP/ equivalent in the ratio of1:1 (URP 1: Cement 1) by volume over the corners and pipe insert outlet gaps. Filling the gaps around drain mouth with (PMM) polymer modified mortarmixed with Dr. Fixit Pidicrete URP 10%/ equivalent by weight of cement in the ratio of 1:3.Providing & fixing 100mm width 45gsm glassfiber mesh all around the periphery of drain mouth of rainwater outlet sandwiched with Dr. Fixit Roof seal Classic/ equivalent. Apply the second coat of Dr.Fixit Roof seal Classic/ equivalent with an interval if 5-6 hoursall over the rain wate routlet. Vertical up stand Providing100mmx100mm Square/rectangle upstand of M20 grade concrete or with PMM around mechanical equipment like HVAC, air-conditioning, solarpanels. Etc. Apply aself-priming coat of Dr.Fixit Roof seal Classic/ equivalent and two coats reinforced with 45 Gsm glass fiber mesh without dilution in the interval of 4 -6 hrs. Apply Dr. Fixit PU Sealant/ equivalent at around thejunction of fabricated stand inserted and wall mounting mechanical fixtures.
Step - V : Waterproofing:
Apply a coat of Dr.Fixit Roof seal Classic/ equivalent (diluted with water in the ratio 2:1) as Self Priming 9.0 – 10.0 Sq.mt/ liter. Allow coating to dry for 3-4 hours.Apply two coats of Dr.Fixit Roof seal Classic/ equivalent and two coats reinforced with 45 Gsm glass fiber mesh @ 2.0 - 2.2 Sq.mt/ liter/ coat,without water dilution, the rate of application being the same for both the coats. This would ensure correct consumption of material that will deliver a total DFT of 450– 500 microns. Allow the system to air cure for 5 days minimum. Check to see no void surface is left untreated/ uncoated. The material having following technical Specification as per ASTM D 6083 M –Type II, Attains a Tensile Strength of 2.5 N/mm2 confirming to ASTM D2370; Elongation at break ≥ 300% confirming ASTM D 2370, Adhesion to Concrete 2.0N/mm2 confirming ASTMD4541 and Crack bridging ability upto2mm, Air cure the coating for7days,before water pound test for 48hrs. For vertical surfaces: Apply a two coat tof Dr.Fixit Roof seal Classic/ equivalent with forced coverage of 3.3 - 3.7 Sq.mt/ liter/ Coat. Entire terrace should be coatedwith Roofseal Classic/ equivalent along with parapet walls needs to be enveloped with Roof seal Classic/ Raincoat/ equivalentsystem. Note:- Coating should be terminated below the drip mould on the verticalsurface.
245
-
-
... More
M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg/ sqm each coat on water proofing treatment with preparation of surface as on non assessable area complete all as specified and directed.
90
-
-
... More
M&L for cement concrete 25mm thick type B-1, 1:2:4 (12.5mm graded aggregate) as in roof top mixed with polyster triangular fibre as secondary reinforcement @0.25% of wt of cementetc complete all as specified and directed.
90
-
-
... More
M&L for Cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry as on roof surface with grey cement and pigments, and cut and polished etc incl 15mm thick cement plaster in CM 1:4, complete all as specified and as directed.
90
-
-
... More
M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed:-(a) Provide PCC 1 : 1.5 : 3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr Fixit or equivalent as approved, finish the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/ Sqm complete. on complete sunken surfaces of floor & wall and provide necessary connections to soil/ waste pipe from WC/ nahani trap etc including demolation of old sunken complete all as specified and as directed. (d) applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.) (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. (Note : Floor Area shall be measured for payment).
20
-
-
... More
M&L for 50mm thick PCC type B-2, 1:2:4 (using 40mm graded aggregrate) as in floor finishing and making cement concrete surface even and smooth without using extra cement.,complete all as specified and as directed.
50
-
-
... More
M&L for forming construction/ dummy joints 65mm deepx10mm wide fillied with Grade B sealing compound complete all as specified and as directed.
15
-
-
... More
Supply only polyester triangular fibres as secondary reinforcement in all types of concrete and mortars ,complete all as specified and as directed.
2.5
-
-
... More
M&L for water proofing on walls with following steps:
Step - I : SurfacePreparation:
Erecting bamboo scaffolding work.Clean the surface, removing the laitance, old paints, curing compound with wire brushIng with water pressure wash. Areas of algae, mildew or fungus on the wall should be cleaned with 1 part household bleach and 3 parts waters, followed by a powerwasher rinse using clearwater.
Step - II : CrackFilling:
Opening non-structural hairline cracks in plaster surface up to 5mm widthin “V” shape and fill with Dr. Fixit Crack-X Paste. Cracks more than 5mm and all separation gaps should be filled up with Polymer modified mortar (PMM) mix with Dr. Fixit Pidicrete URP/ Equivalent 10% by weight of cement in the ratio of 1:3 Or 1:4 curing etc. as per standard methodology. All in between CCmembers and masonry/ pipe penetration shall be racked out at least 10 mm deep. The gap shall be sealed by (PMM) polymer modified mortar admix with Dr. Fixit Pidicrete URP 10 % by weight ofcementintheratioof1:3.
Step - III : WaterproofCoating:
Providing & apply first coat of Dr. Fixit Raincoat Neo self-priming coat/ Equivalent/ Equivalent with upto10% water dilution with brush/ roller on the vertical wall surface in SSD condition, diluting1.0 liter coating with100ml clean portable water. Allow it to dry for 4 -6 hours. Apply one topcoat of Dr.Fixit Raincoat Neo without dilution as waterproof top coat with force coverage at the rate of 3.7- 4.1 Sq.mtr/ liter to achieve DFT of 100 -110 microns for the fresh plaster and repainting surface. Allow the coating to full air cure for 7 days. The material having following technical properties: Att ainsh air line crack bridging upto 1mm, Elongation of100 % as per ASTMD 412; Tensile strength 1.50 Mpa per ASTMD412, Pull off a dhesion,1.5 Mpa as per ASTMD4541
86
-
-
... More
Dismantling wrought iron or mild steel work of any description,complete all as specified and as directed.
4.5
-
-
... More
Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and as directed.
40
-
-
... More
Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land,complete all as specified and as directed.
4.5
-
-
... More
S&F facfory made single extruded WPC (Wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhats size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fibres (wood fibre/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with minter joints after applying PVC solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawl strength of 2200N (Face) & 1100N (Edge), minimum compressive strength 58N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A catagory with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS holdfast/ lugs/ ss dash fastners of required dia and length complete as per direction of Engr-in-Charge.
35
-
-
... More
S&F Facory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonateand natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kgs/cum and screw withdrawl strength of 1800N (Face) & 900N (Edge), minimum compressive strength 50N/mm2, modulus of elasticity 850N/ mm2 and resistance to sread flame of class A catagory with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with SS but hinges of required size with necessary full body threaded star headed countersunk SS screw, all as per direction of Engr-in-Charge.
13
-
-
... More
Taking down copper/ aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.
214
-
-
... More
Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M No III Mhow complete all as specified and directed.
20
-
-
... More
Taking down carefully copper/ aluminium Sub main wiring of any size from surface/ concealed/ existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
243
-
-
... More
Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M No-III Mhow complete all as specified and directed.
8
-
-
... More
Taking down existing celing fan/ Exhaust fan and refixing the same replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writting the MES Number with synthetic enamel paint complete all as specified and directed.
12
-
-
... More
Taking down existing geyser any size in position and re-fixing the same after B/R work including painting of the same with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and writing MES Number in black paint with skilled painter, with and including providing three core flexible copper cable for connection from ceiling rose/ connector complete all as specified and directed.
7
-
-
... More
Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and re fixing the proposed LT Indoor panel complete all as specified and directed.
4
-
-
... More
Taking down old/ unserviceable LT indore panel, distribution board by disconnection of electric connection carefully SPN DBs/ TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.
1
-
-
... More
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2mm thick, 60mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:-
-
-
-
... More
(a) One light point controlled by one, one way switch 5 Amps complete all as specified and directed.
96
-
-
... More
(b) One light point controlled by two, two way switch 5 Amps complete all as specified and directed.
4
-
-
... More
(c) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator , complete all as specified and directed.
28
-
-
... More
(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. complete all as specified and directed.
20
-
-
... More
(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. complete all as specified and directed.
30
-
-
... More
(f) One bell point controlled by one, bell switch 5 Amps complete all as specified and directed.
4
-
-
... More
All as per item No.191 here in before but using 2.5 sqmm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 2.5 sqmm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. complete all as specified and directed.
24
-
-
... More
All as per item No.191 here in before but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket cobmination point including necessary running of 4.0 sqmm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point) complete all as specified and directed.
8
-
-
... More
S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.
174
-
-
... More
S & F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.
8
-
-
... More
S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.
24
-
-
... More
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
50
-
-
... More
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.
24
-
-
... More
S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed.
16
-
-
... More
S & F for for Bell push modular 6 Amps single module complete all as specified.
4
-
-
... More
S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified
76
-
-
... More
S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and directed
4
-
-
... More
M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC FRLSH conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 Sqmm cable, one runs of 6 Sqmm cable and one run of PVC conduit will be measured as one unit.
118
-
-
... More
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 4 sqmm for P and N and one run of earth and one run of PVC conduit will be measured as one unit
125
-
-
... More
S & F for lamp holder, PVC/ Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.
31
-
-
... More
S & F for Highly efficient LED Bulbs, 10 watts in B-22 cap complete all as specified and directed.
31
-
-
... More
S&F Inverter LED batten with squre profile and polycarbonate channel. Lithium lon battery with bcharging time 8 hourse -10 hourse and back up time upto 4 hours. with extruded environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories all as specified and directed.
36
-
-
... More
S&F metallic exhaust fan AC single phase 230/ 240 V of size 300mm sweep with louver including cutting the existing wall for making a hole of appropriate size for fixing the exhaust fan and making good the disturbed surface complete duly connection with copper wire etc completeincl taking down of ceiling fan in safe custody and deposit to E/M Store all as specified and directed.
2
-
-
... More
S & F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and directed.
14
-
-
... More
S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and directed.
8
-
-
... More
S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and directed.
5
-
-
... More
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed.
8
-
-
... More
S & F for ceiling fan, 230 Volts, 50Hz, 1200mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose with remote to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and directed.
3
-
-
... More
S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.
12
-
-
... More
Supply, installation, commissioning and testing indoor type LT wall mounting Panel Board of minimum size 1.50 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four Nos Three phase KWH meter, one No single phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/ MCB output of suitable length for connection of cable from main busbar, made out of 2.00mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 sqmm copper wire and connections of all outgoing/ incomming existing cable of any size complete all as directed by Engineer-in-Charge. (For Officers G+1 Md :- BUSBAR - (a) Copper strip busbar of size 25 x 6mm wrapped with PVC sleeves with maintained the colore code and provision of making holes with copper nuts, bolts, & washer for cable connection including hydrograpic insulatore with nuts & bolts at both ends - 05 No's Incoming - (b) MCCB IP 44 and IP 66/67 protection, 4 pole 415 volts, Lcu =25 KA breaking capacity, rating 100 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links - 01 No
(c) Digital voltmeter of range (0-500) volts, flush mounting type of size 100mm x 100mm (4" x 4") squre dial with selector switch - 01 No's
(d) LED Neon indicator lamp (RYB) with hilder, 230/250 volts, AC - 01 set (set of three) Outgoing - (e) MCB TPN 63 Amps, 440 volts, 'C' curve 10 KA all complete as specified and as directed - 04 Nos, (f) MCB Single pole & neutral 32 Amps, 240 volts, 'C' curve 10 KA complete all as specified and directed - 01 Nos
(f) Fixing only seviceable existing electric meter - 04 Nos (Obtained from existing Panel) Note:- The rate including removing of extg single phase servicevle meter from u/s LT Indoor panel
1
-
-
... More
Supply and fix MCB SPN 6 to 32 Amps 10 KA, 'C' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed.
8
-
-
... More
Supply and fix MCB SP 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium/ copper lugs complete all as specified and directed.
54
-
-
... More
Supply and fixing 415V 10KA 'C' 63 Amps curve miniature circuit breaker (MCB) of TPN/ 4 poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.
4
-
-
... More
M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with one single pole MCB SP 20 Amps complete all as specified and directed.
8
-
-
... More
S & F for Modular type TV Socket out let complete all as specified and directed.
4
-
-
... More
S & F for Modular typeTelephone socket outlet complete all as specified and direced.
4
-
-
... More
Supply & fix plastic body exhaust fan, AC single phase 230/ 240 V of size 200mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed.
4
-
-
... More
S & F for water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold for Officers JCO's and OR Md Accn incliding writting the MES Number with synthetic enamel paint complete all as specied and as directed
1
-
-
... More
S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20mm dia for telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.
35
-
-
... More
Sppply & Laying XLPE insulated, armoured, electric cable of size 35 sqmm 3.5 core with aluminium conductor, 1100 volts grade, laid in trenches, fixed on poles/ walls or passing through pipes including provision of necessary lugs and glands & making necessary connection including taking down old unservicable cable of any core complete all as specified and directed.
55
-
-
... More
Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in any type of soil complete all as specified and directed.
12.15
-
-
... More
Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
7.74
-
-
... More
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
4.41
-
-
... More
Supply laying and jointing GI pipe 'light grade' 40mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified and directed.
10
-
-
... More
M & L for clean and dry sand (un washed) in trenches incl spreading and levelling for cushioning of UG cable complete all specified and directed. (Note: Punned thickness shall be measured)
3.65
-
-
... More
M & L for brick size sub class ‘B’ (modular size), laid flat in trenches for protection of cable complete all as specified and directed.
0.5
-
-
... More
M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR Part-I including excavation and earthwork in any type of soil/ strata and testing on completion. Note:- GI earth wire 4mm dia and 15mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements