Military Engineer Services Tender

Filling of entire swimming pool area with water and checking for leakage treating identified points with injection grouting as per manufactures specification.

Making of angle fillets all around the joint of the wall with polymer modified mortar using smart care SRP after treating the joints with smart care epoxy injection grout @ W nozzles.

Supply and applying high performance hybrid polyurea elastomeric waterproofing coating cold applied of spray / brush applied, smart care ultron liquid membrane with elongation of 600% and tensile strength of 12.6 N/mm2 as per ASTM D2370, crack binding ability of 3mm as per ASTM C1305, shore A hardness of min 75 as per ASTM D2240. the system include final base preparation, epoxy primer application and applying smart care Ultron or approved equivalent in two coats at 1.5 kg per Sqm etc, complete as per manufacturer specifications. sand should be broadcasted on the final coat while its still wet so that the final tile adhesive can adhere to the surface.

M&L for 10 mm thick rendering in CM (1:3) over fair faces of brick work /concrete surface finished even and Smooth mixed with water proofing compound complete all as specified and as directed by engineer- in charge . Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

Supply only Liquid water proofing compound complete.

M&L DIVING Board made of wood with fiber coating with 550 mm 5 mt length . Thickness of Diving Board 2.5 to 1.5 inch , MOC Fiber Coated treated teak wood with coating and upper layer of fiber etc complete all as specified and directed

M& L For Glass mosic tiles at finished plain wall and floor surface of size 220 mm x147 mmx 8 mm min all colour ,design ,fixing in customize design as per direction of Engineer in charge . Note: Tiles to be fixed on the wall and floor surface with the help of approved adhesive applied at the specified rate and grouting of the same . Rate of Adhesive also included in this item already

S& F Standard handrail swimming pool ladder 4 to 6 steps complete with anchoring fixtures and earthing connection all as specified and directed

S & F in repair for SS Railing made out of stainless steel any type of pattern size and type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.

M&L for vitrified paver color tiles 30 cmx30cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Excavation in trenches nexc 1.5m wide and nexc 1.5m in depth as in foundation etc as in soft (BC) soil complete.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete.

M&L RCC (1:2:4) Type B1 using 20 mm graded stone aggregate) as in foundation , raft, footing, Wall, plinth beam, base for column etc

Providing precast concrete as in cover slab lintel etc using RCC (1:2:4) with 20mm graded stone agg including all form mouled etc complete.

M&L Formwork to side of concrete foundation footing base of column raft beam and plinth beam etc

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S.

M&L Applying new surface and applying two coat of premium acrylic exterior anti algal fungal emulsion paint over one coat of weather coat exterier primer on wall including putty all as directed by Engr-in-Charge.

Disconnecting, taking out and removing old existing unserviceable LT Panel of any description and in any position complete all as specified and directed by the Engineer-in-Charge.

Labour for taking out flood light fittings from existing pole complete all as specified and directed.

Taking out old u/s GI pipe line alongwith fittings from existing connections of size 40 mm dia complete all as specifies and directed.

Taking out all filter media and disposed off at out side the defense area .

Taking out old u/s chlorine and alumn dozing system alongwith fittings from existing connections and deposite to the MES yard complete all as specifies and directed.

S&F, installing and testing Chlorine dozing system.Model NPE9021,Type : Plunger,Fluid Handle : Chemical,Flow Requried : 30LPH,Capacity offered : 36 LPH (a) Plunger type chlorine dozing pump with 36 LPH,Discharge pressure : 10Kg/cm2,Pump standard : API 675,Head : SS 304,End Connection : 1/2" BSP F,Flow Adjustment : Manual 0-100%,Duty : Continuous,Vol EffIciency : 90%,Quantity : 2 Nos (1W+ 1SB) (b) SS tank with capcity of 50 Ltrs.Type : Vertical Cyclinder,Size(ODxHT) : 400x500 H mm,Liquid to be handle :Chemical,Operating Temp ; Ambient,Material of Construction : SS304,Quantity : 1 Nos,Nozzles : Inlet,outlet,Extra Nozzzle. (c) SS Pipe line 15 mm,15NB Class 150 Seamless SS304 (d) Flowlating pump with capacity of 0.5 HP,Input Supply : 415 V,3 Phase,50 Hz,Foot Mounted,No of poles/Speed : 4 pole/140RPM.Enclosures : STD TEFC,IE2,Quantity : 2 Nos(1W+1SB)

S&F, installing and testing Alum Dozing pump(IS 11745:1986), motor (IS12615:2018) setwith 20-30 LPH all as specified and directed.

S&F, installing and testing PVC Skimmer of Standard Size complete all as specified and directed.

Labour only for filling following filter into the existing pressure filter all as directed by engr-in-charge

PEBBLES 40-25 mm not less than 500 kg make Ion Exchange

PEBBLES 20-12 mm not less than 500 kg, make Ion Exchange

COARSE SILEX not less than 500 kg, make Ion Exchange

FINE SILEX not less than 500 kg, make Ion Exchange

GRAVELES not less than 500 kg, make Ion Exchange

FILTER SAND not less than 4000kg, make Ion Exchange

Supply, installing, testing and commissioning of outdoor LT panel board 415 Volts, 4 wire, 3 phase factory fabricated powder coated, cubical, weather and vermin proof outdoor kiosk type, front opening, floor mounted made out of 3.15 mm thick CRCA sheet of size suitable for mounting the its accessories with electrolyte connection of the equipment/ accessories to be fixed, cable glands, lugs, mounted on steel angles supports of suitable size with grouting 4 Nos supports in PCC 1:2:4 type B1 complete with separate compartment for housing with proper arrangement for air circulation and including the following accessories all as specified and directed. (a) Electrolytic aluminium bus bar 100 Amps in distant colour with epoxy supported insulators - 01 Job (04 Nos). (b) MCCB 4 pole, 100 Amps, 415 Volts, rupturing capacity 36 KA - 01 Nos for incoming, MCCB 4 pole, 63 Amps, 415 Volts, rupturing capacity 16 KA - 03 Nos for (Outgoing),TPN rupturing capacity of 40 Amps-02 Nos,SPN rupturing capacity of 20 Amp-01 Nos. (c) Volt meter analog type 0 to 500 volts with selector switch - 01 No (d) Ammeter analog type 0 to 100 Amps with CTs & selector switch - 01 No (e) Phase indication lamp LED type ( set of three ) - 01 set

Supplying and laying of CPVC pipes of size 65 mm SDR 80 & Plain CPVC SDR 80 fittings in trenches complete all as specified and directed. Note : Pipe Shall be grouted in floor PCC,PCC Work will be measured under B/R Schedule.

Supply and fixing of CPVC flow nozel

Supply & Fix Flood Light with capacity of 150 watt

M & L for GI pipe Med grade of 40mm dia alongwith all fittings and fixtures complete laid in trenches/under the foor/wall all as specified and directed.

Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges with type of B1 1:2:4 with 20 mm graded aggregate.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 16 Sqmm 2 Core including taking down of old u/s cable.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 10 Sqmm 2 Core including taking down of old u/s cable.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete.

Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete.

Supplying and laying reinforced precast concrete cable cover, class LT, type 1 with peak, size 250mm x 150mm x 40mm.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 40 mm dia for cable protection complete all as specified and directed.

Note:- (a) The material as incorporated in the work shall be from manufacturer mention in the BOQ (Sch ‘A’) and undertaken by the authorise representative of manufacturer .Material will be accepted and allowed to incoporate in the work only after production of Purchase Voucher / authorised dealer in original and test certificate from the manufacturer. (b) Bidder must submit the authorised applicator certificate at the time of awarding the contract, before commencement of work. (c) The Contractor shall give Guarantee for structural repair a period of 10 (Ten) years from the certified date of completion. Similarly the Contractor shall take warranty of structural repair for next 10 years of the work immediately after executions/ completion of work from the authorised Applicator . (d) The work shall be undertaken having experience of rehabilitation work and experience certificate is required to be produced on the day of submission of Contract,If failed bid to be rejected. (e) water will be suppy by MES at swimming pool.