Military Engineer Services Tender

S&F and renewal of seamless ceiling with using 12mm thick factory made gypsum fibre board fixed with screw, including GI frame work for seamless ceiling comprises of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm with lips of 10.5 mm and fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre suitable for suspended system with and including two coats of oil bound distemper over one coat of putty to give even and smooth finish without showing any joints complete all as specified and directed.

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as specified directed.

M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc including all necessary drilling, bolting or rivetting , etc, and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

Dismantling of timber in fillets, rails, posts, rafters, purlins etc size of section under 40 Sqcm provided for complete all as specified and directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L two coats of synthetic enamel paint over coat of Red oxide primer over Old steel surfaces including prepartion of surface n.exc 10 cm width or girth complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and counter shunk for screw, including bending and welding angle necessary gusset plate riveting etc n.exc 10 kg each brackets confirming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L, brick work with sub class ‘B’ bricks (old size), straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing removing from site complete all as specified and directed.

Taking up or down 25 mm bore steel tubing and connections including cleaning for refixing removing from site complete all as specified and directed.

Supply and laying 20 mm dia of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked, concealed or fixed to wall or laid in floors complete all as specified and directed.

Supply and laying 25 mm dia of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked, concealed or fixed to wall or laid in floors complete all as specified and directed.

S&F 20mm dia bore Galvanised tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 25mm dia bore Galvanised tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling of water tanks exc 250 ltr and n.exc 500ltr capacity and removing from site complete all as specified and as directed.

Dismantling of water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and directed.

S&F Rotational moulded poly-ethylene three layered antibactrial film tanks (cylinderical vertical) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S&F Rotational moulded poly-ethylene three layered antibactrial film tanks (cylinderical vertical) 1000 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm dia of pipe complete all as specified and directed.

S&F in renewal of gun metal globe/valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F in renewal of gun metal globe/valve with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for renewal of cleaning etc and reconnecting and refixing in position capacity of tank exc 250 and n.exc 500 ltr (cleaning, repairing etc measured separately) complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for renewal of cleaning etc and reconnecting and refixing in position capacity of tank exc 500 and n.exc 1000 ltr (cleaning, repairing etc measured separately) complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 250 ltrs but n.exc 500 Ltrs complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 500 ltrs but n.exc 1000 Ltrs complete all as specified and as directed.

S&F for renewal of 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm dia of pipe complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in beams, cantilevers bressummers, lintel over 1.5 m span etc complete all as specified and directed.

M&L for use and waste Formwork to sides & soffits of floor or roof beam or lintel beam rough finished surfaces of concrete complete all as specified and directed.

M&L for mild steel TMT bars,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.