Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Eprocure
Opening Date28 Oct 2024
Closing Date4 Dec 2024
Tender Amount₹ 3,53,19,000
Costs
EMD
₹ 4,30,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681586_1Tender No
CWE/JHA/GWL/TOKEN/59 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling of plain or corrugated steel sheeting, any gauge, thickness in roof covering complete all as specified and directed.
100
-
-
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
480
-
-
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
19
-
-
Demolition of brickwork or stone/boulder masonry built in cement or cement lime mortar including all quoins, arches, pillars etc. and unserviceble brick/debaris dispose off complete all as specified and directed.
875
-
-
Dismantling boarding/Pelmet etc in any description, fixed in any position with nails complete all as specified and directed.
20
-
-
Dismantling timber scantling (unframed work) in fillets, rails, posts, rafters, purlins, etc Under 40 sqcm in section, in any position complete all as specified and directed.
40
-
-
Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, incl cover fillets/grid frame work complete all as specified and directed.
313
-
-
Taking down chowkats or frames with shutters (without taking off shutter from the frame) n. exc. 1.50 Sqm each and removing from site complete all as specified and directed.
45
-
-
Taking down chowkats or frames with shutters (without taking off shutter from the frame) exc. 1.50 Sqm but n. exc. 4 Sqm each and removing from site complete all as specified and directed.
35
-
-
Demolition of reinforced cement concrete ( reinforcement cut as reqd to facilitate demolition) in shelves and similar suspended work n.exc 15cm thickness below or above ground level and removing rubbish from site complete all as specified and directed.
145
-
-
Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
31
-
-
Demolition of cement concrete in ground floors and pavings exc 15cm thickness (below or above ground level) complete all as specified and directed.
110
-
-
Dismantling stone slabs & tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
2
-
-
Taking down old bib taps, stop cocks, pillar taps etc of cast copper alloy, 15mm bore and removing from site complete all as specified and directed.
180
-
-
Taking down old PVC connections of any description all as specified and directed.
32
-
-
Taking down old wash hand basin of any description incl brackets & waste pipe etc all as specified and directed.
18
-
-
Dismantling old PVC L/L flushing cistern with flush pipe, of any capacity incl all fixing arrangements etc all as specified and directed.
18
-
-
Taking down old looking mirror of any description all as specified and directed.
16
-
-
Taking down old towel rail/towel ring or soap dish of any description all as specified and directed.
18
-
-
Dismantling old PVC water storage tanks of 500 ltr capacity and removing from site all as specified and directed.
18
-
-
Taking up or down steel tubing 15mm bore and removing from site all as specified and directed.
216
-
-
Taking up or down steel tubing 25mm bore and removing from site all as specified and directed.
100
-
-
Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc complete all as specified and directed.
100
-
-
Surface dressing n. exc. 15cm deep in soft/dense soil complete all as specified and directed.
1000
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
670
-
-
Excavating in trenches n exc 1.5 m wide and exc 1.5 m and n exc 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
4
-
-
Excavation over aeras, n.exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.
288
-
-
Returning, filling with approved earth including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
570
-
-
Removing excavated material exc. 50m upto 250 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
448
-
-
M&L for Plain cement concrete type D-2 (1:4:8) using 40mm crushed stone aggregate as in foundation filling and mass concrete all as specified and as directed.
152
-
-
M&L Treating the top surface of filled at the rate of 5 litres of emulsion per sqm of surface area complete all as per specified and dirceted.
505
-
-
M&L Treating the soil under plinth protection at the rate of 5 litres of emulsion per sqm of surface area complete all as per specified and directed.
355
-
-
M&L Treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per sqm of surface area complete all as per specified and directed.
250
-
-
PRECAST ELEMENTS : Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast Elements of min strength of M25 Desgin mix for various sizes shapes and steel , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, erection at site, grout filling etc complete. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical conduits and switch boxes as per drawing, placement of CPVC pipes, including jointing lips and hooks, grout couplers if required, GI corrugated sheaths for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing flexible conduit for connection of wall and slab conduit, filling concrete in the holes kept for jointing electrical and plumbing pipes, providing required cutouts for sewerage and other pipes, lifting and fixing arrangements, the measurement of the elements shall be done in full without deduction of Doors and Windows Cuts of Upto 2.5 sqm area, including vetting of structural drawings for any changes in the structural drawaing as attached in list of drawing for precast elements from IIT /NIT etc complete all as specified and directed.
Note : Precast RCC concrete element shall not be less than M-30 grade. The design of Pre cast concrete element (s) M-40 grade alongwith architecture design, design engineering, structural design shall be provided by bidder/contractor after being duly ratified and vetted by Indian Institute of Technology/ National Institute of Technology at no additional cost and same shall be approved by Accepting Officer. This does not absolve the contractor of his responsibility of rectification of defects, which may arise at later stage. The architecture design, design engineering, structural design duly vetted by IIT/NIT shall be provided by the contractor at no additional cost and cost of the same to be included in quoted amount. Work shall commence only after approval of structural drawings by Accepting Officer which is duly vetted from IIT/NIT. List of drawings is attached at Appx for ref. However final structural drawing shall be vetted from IIT/NIT by the contractor at no additional cost and the expense for the same is deemed to be included in the quoted rate. The vetted drawing shall be approved by CWE.
-
-
-
Providing ,transportation, Fixing ,erection and installations etc complete for RCC Precast Foundations having min strength of M25 Desgin mix elements for sizes as desired in structural drawing within 1.2 mtr width to length within 4 mtr long for 150 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including jointing lips and hooks, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
370
-
-
Providing ,transportation, Fixing ,erection and installations etc complete for RCC Precast Foundations having min strength of M25 Desgin mix elements for sizes as desired in structural drawing within 1.2 mtr width to length within 4 mtr long for 150 to 300 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including jointing lips and hooks, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
2
-
-
Providing ,transportation, Fixing ,erection and installations etc complete for RCC Precast Foundations having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing within 1 mtr width to length within 3 mtr long for 150 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including jointing lips and hooks, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
189
-
-
Providing ,transportation, Fixing ,erection and installations etc complete for RCC Precast columns having min strength of M25 Desgin mix 250 mm dia in circular shape Elements for sizes as desired in drawing, length within 4 mtr long, including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, Connectors and Square Decorative Brackets to Connect with Beam,GI Corrugated Ducts for dowel bars and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including jointing lips and hooks, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
95
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast WALL, having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 1.2 m to height within 2.1 mtr for upto 65 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical PVC conduits pipe and switch boxes as per drawing, placement of CPVC pipes 15 mm or 20 mm as per requirement including FTA and MTAs, including jointing lips and hooks, grout couplers if required for water supply pipe, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing cut outs for doors, windows, vents, sewerage pipes, etc lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
40
-
-
Providing,transportation, Fixing ,erection and installations etc complete for RCC Precast WALL having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 3.5 m to height within 5.0 mtr for 100 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical PVC conduits pipe and switch boxes as per drawing, placement of CPVC pipes 15 mm or 20 mm as per requirement including FTA and MTAs, including jointing lips and hooks, grout couplers if required water supply pipe, GI ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing cut outs for doors, windows, vents, sewerage pipes, etc lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
350
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast WALL having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 3.5 m to height within 5.0 mtr for 125 mm thick, including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical PVC conduits pipe and switch boxes as per drawing, placement of CPVC pipes 15 mm or 20 mm as per requirement including FTA and MTAs, including jointing lips and hooks, grout couplers if required water supply pipe, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing cut outs for doors, windows, vents, sewerage pipes, etc lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
1700
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast WALL having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 3.5 m to height within 5.0 mtr for 150 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical PVC conduits pipe and switch boxes as per drawing, placement of CPVC pipes 15 mm or 20 mm as per requirement including FTA and MTAs, including jointing lips and hooks, grout couplers if required water supply pipe, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing cut outs for doors, windows, vents, sewerage pipes, etc lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
330
-
-
Providing ,transportation, Fixing ,erection and installations etc complete for RCC Precast roof beam 300x600 mm, lintel band, cantilevers bressummers, lintels having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, Connectors or Decorative Brackets to Connect with Beam and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including jointing lips and hooks, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
80
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast Chajja having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 0.6 m to length within 2.1 mtr for 50 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including jointing lips and hooks, grout couplers if required, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing cut outs for doors, windows, vents, sewerage pipes, etc lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
75
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast WALL, CHAJJA OR SHELF having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 1.2 m to height within 2.1 mtr for 65 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical PVC conduits pipe and switch boxes as per drawing, placement of CPVC pipes 15 mm or 20 mm as per requirement including FTA and MTAs, including jointing lips and hooks, grout couplers if required water supply pipe, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing cut outs for doors, windows, vents, sewerage pipes, etc lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
45
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast SLAB having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 3.0 m to span within 4.0 mtr for 100 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical PVC conduits pipe and switch boxes as per drawing, placement of CPVC pipes 15 mm or 20 mm as per requirement including FTA and MTAs, including jointing lips and hooks, grout couplers if required for water supply pipe, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing flexible conduit for connection of wall and slab conduit, filling concrete in the holes kept for jointing electrical and plumbing pipes, providing required cutouts for sewerage pipes, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
109
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast SLAB having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 3.0 m to span within 4.0 mtr for 125 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical PVC conduits pipe and switch boxes as per drawing, placement of CPVC pipes 15 mm or 20 mm as per requirement including FTA and MTAs, including jointing lips and hooks, grout couplers if required for water supply pipe, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing flexible conduit for connection of wall and slab conduit, filling concrete in the holes kept for jointing electrical and plumbing pipes, providing required cutouts for sewerage pipes, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
1164
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast STAIR SLAB Elements for sizes as desired in structural drawing width upto 1.5 m to span within 5.5 mtr for 150 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including placement of electrical conduits and switch boxes as per drawing, placement of CPVC pipes, including jointing lips and hooks, grout couplers if required, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing flexible conduit for connection of wall and slab conduit, filling concrete in the holes kept for jointing electrical and plumbing pipes, providing required cutouts for sewerage pipes, lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
13
-
-
Providing ,transportation , Fixing ,erection and installations etc complete for RCC Precast Spiral Staircase 950 mm wide steps having min strength of M25 Desgin mix Elements for sizes as desired in structural drawing width upto 950mm to span within 4.0 mtr for 50 mm thick , including mould making, providing and fixing reinforcement steel, casting with required admixtures, demolding, curing, transportation, storage, and finally erection at site. This also Includes all labour wages for each stage, machinery, cranes to lift at place at various stages etc including jointing lips and hooks, grout couplers if required, GI Corrugated Ducts for dowel bars, providing dowel bars as per design, grouting the joints wherever required, or welding already provided jointing steel bars, making good the joint with Laticrete or equivalent, providing flexible PVC conduit pipe for connection of wall and slab conduit, filling concrete in the holes kept for jointing electrical and plumbing pipes, including railing/parapet etc providing required cutouts for lifting and fixing arrangements, including vetting of structural drawings of each precast elements from IIT /NIT etc complete all as specified and directed.
20
-
-
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
275
-
-
M & L for hardcore broken stone or boulders of gauge n.exc. 63mm deposited, spread and elvelling in layers n. exc. 15 cm thick watered and ramed to a true surface complete all as specified and directed.
230
-
-
M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.
955
-
-
M&L for Vitrified Ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed layers of cement morter 1:6 complete all as specified and directed.
260
-
-
M&L for Vitrified Ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat of cement morter 1:4 complete all as specified and directed.
30
-
-
M&L for Vitrified Ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed layers of cement morter 1:6 complete all as specified and directed.
645
-
-
M&L for Vitrified Ceramic tiles 8-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in skirting etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed layers of cement morter 1:6 complete all as specified and directed.
62
-
-
M&L for non skid coloured ceramic tiles 7 to 8 thick (Square/reactengular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floor etc set and jointted in neat cement surry and pointed in white or coloured cement to match to floor including 15 mm thick screed bed layers of cement morter 1:6 complete all as specified and directed.
58
-
-
M&L for glazed ceramic tiles of size 300x450x7-8/450x600x7-8mm thick on vertical surfaces suck as skirting/dado set and jointed in near cement slurry point jointed in white or coloured cement to match to floor including 10mm thick rendering in CM 1:4 complete all as specified and directed.
413
-
-
M&L for Granite 18- 20 mm thick over including 10 mm thick CM 1:4 (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing including rounding outer exposed edge by grinder machine complete all as specified and directed.
43
-
-
M&L for Granite 18- 20 mm thick over including 15 mm thick CM 1:6 (of any type) work (table rubbed and polished) in , cooking platforms and like in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing including rounding outer exposed edge by grinder machine complete all as specified and directed.
55
-
-
M&L 75mm thick for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. Note:-Rate is deemed to be inclusive of materials against forming & filling of joints.
405
-
-
Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
500
-
-
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
1500
-
-
Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
350
-
-
M&L for Pre-cast cement concrete block masonary with solid block type B-1 1:2:4 (using 20 mm graded stone agg ) exc 10 cm in width and setting in mortar 1:4 complete all as specified and directed.
6
-
-
M&L for brick work with fly ash (old size) bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 below plinth beam in steps complete all as specified and directed.
2
-
-
M & L for 15 mm thick rendering in cement mortar 1:4 fair faces of brick work or concrete surfaces finished even and fair without using extra cement on wall all as specified and as directed.
170
-
-
S&F WPC frame 100mmx65mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed
50
-
-
S&F WPC frame 125mmx65mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed.
25
-
-
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note:- stainless steel butt hinges and necessary S S screws shall be paid separately.
40
-
-
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size, decorative face veneer comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
Note:- stainless steel butt hinges and necessary S S screws shall be paid separately)
39
-
-
S&F of MS door frame made out of angle iron of 40x40x5 mm, duly fixed in wall with MS hold fastner, clamps and flat iron including screw nut bolts if necessary with and incl all machine works i. e. cutting, welding, drilling, grinding etc and applying two coats of synthetic enamel paint over one coat of red oxide prmier, complete all as specified and directed.
25
-
-
S&F pressed steel frame 125mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc including filling in with PCC 1:3:6 type C1 using 20mm graded stone aggregate and cured complete all as specified and directed.
21
-
-
S&F pressed steel frame 105mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc including filling in with PCC 1:3:6 type C1 using 20mm graded stone aggregate and cured complete all as specified and directed.
20
-
-
M&L for MS rectangular tubemade of fly proofing shutters, devided into square with plain chamfered or rounded mitred and rounded rebated sash bars any numbers for door shutter, prepared to receive gauze,etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred MS 6mm Square bar for securing glass etc,all as per SSR Pt-l, complete all as specified and as directed.
Note:- the rate for Guage shall be measured seperate item
8
-
-
S&F solid PVC doors frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing as specified in clause 8B-1 to 8-B-10 on page 133 to 138 and page 146 to 153 of SSR -2004 part-II complete all as specified and as directed.
20
-
-
S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC`C` channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles ad plain colour PVC sheet for top rail, lock rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame complete all as specified and shown on drawings of SSR Part-II .
6
-
-
Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. half brick but n.exc one bricks in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
35
-
-
Providing and fixing ISI marked 250 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.
13
-
-
S&F 150 mm aluminium handle cast type anodized complete all as specified and directed.
48
-
-
S&F 150 mm Brass handles, cast type, polished bright complete all as specified and directed.
11
-
-
S&F 450 mm Brass handles, cast type, polished bright complete all as specified and directed.
2
-
-
S&F Aluminium anodised, barrel tower bolts of extruded section of length 250 mm and fixed with cadimium plated wood series, complete all as specified and directed.
16
-
-
S&F 250 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.
11
-
-
S&F Brass, barrel tower bolts of extruded section of length 450 mm and fixed with cadimium plated wood series, complete all as specified and directed.
2
-
-
S&F 150 mm Butt hinges, extruded Alumunium anodised and fixed with steel screws, complete all as specified and directed.
21
-
-
S&F 150 mm Butt hinges, extruded brass, with steel hinge pin, bright polished and fixed with steel screws, complete all as specified and directed.
15
-
-
S&F 200 mm Butt hinges, extruded brass, with steel hinge pin, bright polished and fixed with steel screws, complete all as specified and directed.
15
-
-
S&F 150 mm floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
2
-
-
S&F Mortice lock, brass body 4 levers vertical type, size 100 mm complete all as specified and directed.
6
-
-
S&F for 4mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
40
-
-
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
15
-
-
S&F, for alluminium door closer hydraulically regulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
4
-
-
S&F for Butt hinges, 100 mm size, extruded aluminium alloy with steel hinge pin anodised and fixed complete all as specified and directed.
12
-
-
S&F for 150 mm long aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
32
-
-
S & F 250 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet , cast or extruded sections or cast aluminium alloy complete all as specified and directed.
8
-
-
S&F for 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
12
-
-
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, buffing, polishing and making curvature (where ever required ) and fitting the same with necessary stainless steel nuts and bolts complete, inculuding fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
57
-
-
S&F for Anodised aluminium window and ventilator shutters with powder coated, side hung/ sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, coloured 4mm glass , aluminium wire cloth .45mm dia ,apprature 1.40mm and anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
Note;- the rate for glass and alu wire cloth shall be included in the same item)
41
-
-
S&F10mm thickToughned Glass exc 0.5Sqm of each pan and sand blasting, impression of desired design, decorative, crest shape of any size with itching (as per sample kept in GE office) , if required fixed to wall with necessary anchors, screw etc and similar work including cutting to shape, drilling holes , screws, clamp with necessary anchors, and similar accessories etc complete all as specified and directed.
5
-
-
S&F 7 to 8mm thick sheet glass exc 0.5Sqm of each pan fixed to PVC window with necessary rubber gasket and similar accessories etc complete all as specified and directed.
30
-
-
M&L for Offrs mess crest of over all size not less than 45x45 cm fixed to glass partition/door with fluorecent paint complete all as specified and directed.
5
-
-
M&L for Offrs mess letters or figures (Block. Roman, Italic or Indian) writing n exc. 30 cm high including Stops, commas, short lines, dashes, hyphens, brackets, arrows, etc. fixed to glass partition/door with fluorecent paint complete all as specified and directed.
35
-
-
S&F Powder Coating anodised aluminium frame with three tray for windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
43
-
-
M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.
52
-
-
S & F factory made UPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock complete all as specified and directed.
Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.
32
-
-
S&F 12mm thick Toughned Glass frameless doors, (automatic) and similar work including cutting to shape, drilling holes , screws, clamp and accessories etc complete all as specified and directed.
5
-
-
Providing and applying a thin layer of birla white care putty of 1 mm thickness over plastered surface of wall concrete surface to prepare the surface wall even and smooth complete all as specified and directed.
400
-
-
Supply and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) of plain or decorative with up /down ( sunk/projected) design including frame work & G.I wire mesh 1.40mm dia complete all as specified and directed. Note : The rate for metal frame work and reinforced with G.I. wire dia 1.4mm mesh included in this item.
255
-
-
S&F plaster of Paris under false ceiling as a cove of sunk in moulding (gypsum anhydrous) n. exc 10cm width or girth complete all as specified and directed.
41
-
-
M&L for IInd class hardwood clean sawn as in scantlings complete all as specified and as directed.
1
-
-
M&L for IInd class hardwood moulding as in cornices, picture rails and the like, secured with nails or brads exc 6 Sq cm but n exc 13 Sq cm complete all as specified and as directed.
100
-
-
M&L for preparing newly plastered ceiling surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
800
-
-
M&L preparation of new plaster surfaces of wall, applying 2-3 mm wall care putty and applying two coats, 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over alkali resistant primer complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and directed.
1250
-
-
M&L, Preparation of new plaster surfaces of wall, applying 2-3 mm wall care putty and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
1065
-
-
M&L for preparation of new plaster surfaces of wall and applying 3 coat of white wash on walls complete,all as specified and directed.
190
-
-
M&L Preparing new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed.
80
-
-
M&L, 10 mm thick rendering on top of roof surfaces of any description in cement mortar 1:4 mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.
84
-
-
M & L for French polishing (Glossy finish) on wooden surfaces of any description, width or girth including cleaning and preparing the surface including one coat of wood filler on new works with two or more coats complete all as specified and directed.
408
-
-
M & L for applying two coat of synthetic enamel paint on new steel surfaces including preparation of surfaces and including over one coat of red oxide complete all as specified and directed.
366
-
-
M & L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.
125
-
-
S & F solid UPVC wall cladding consisting of 3mm thick wood grain printed/any other coloured UPVC sheet inclusive of solvent cement and fixing at site on PVC Beading frame with the screw or any other necessary accessories complete all as specified and directed.
300
-
-
S & F seasoned solid IInd class hardwood plank as in wall cladding of thickness 40 mm thick Planed one side & edges tongued and grooved or rebated fixed on wooden fillets/concrete surface with SS screw PVC rawel plug or nails and finished the surface with french polishing (Glossy finish) including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified and directed.
20
-
-
S & F seasoned solid IInd class hardwood plank/boarding as in false ceiling cladding of thickness 40 mm thick Planed one side and edges tongued and grooved or rebated fixed on wooden fillets/concrete surface with SS screw PVC rawel plug or nails and finished the surface with french polishing (Glossy finish) including cleaning and preparing the surface (Glossy finish) including a coat of wood filler on new works complete all as specified and directed.
30
-
-
S & F 25mm thick bonded mineral wool blanket slab made from glass density 24 kg/cum and fixed as per manufacturer’s instructions, complete all as specified and directed.
45
-
-
S & F Elegant Tile made of perforated cement fiber composite 595x595/295X 1195/595X1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and directed.
45
-
-
S & F IInd class hardwood louvred frames 80 to 100 mm wide with fixed louvres of 100 mm thick, frame put together with glue, pinned at joints, supplied and fixed complete all as specified and directed.
38
-
-
S & F solid Corian counter on top of thickness 10 to 15 mm in sand stone colour and width not less than 750 mm, supplied and fixed complete all as specified and directed.
20
-
-
S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work complete all as specified and directed.
38
-
-
S & F first class hard wood beading of size exc 3 mm x 20 mm in section, fixed with nails including polishing etc complete all as specified and directed.
35
-
-
S & F brass drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.
15
-
-
S & F steel locks 4 levers, drawer, grade I, size 50 mm complete all as specified and directed.
20
-
-
S&F magnetic catcher auto closing for fixing in cupboard, to hold the shutter in closed position, complete all as specified and directed.
32
-
-
S & F telescopic channel 600mm long, heavy duty zinc coated complete all as specified and directed.
15
-
-
S & F 50 mm thick sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 including 15 mm thick screed bed layers of cement morter 1:6 or adhesive suitable to fixed on vertical surface complete all as specified and directed.
2
-
-
M & L for 40 mm thick cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in floors & finishing top even & fair without using extra cement complete all as specified and directed.
76
-
-
S & F 40mm thick sand stone slabs polished, set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match complete all as specified and directed.
5
-
-
S & F 2 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.
10
-
-
S&F for counter type vitreous china wash hand basin ,white, oval shape without rim, size 550x400 mm including chain and plug and porcelain stopper, brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
12
-
-
S & F swan neck sink/basin mixer, 15 mm dia with flange made of cast copper alloy, chromium plated, complete all as specified and directed.
6
-
-
S&F for PVC connection 15mm bore with PTMT nuts and 600 mm long complete all as specified and directed.
38
-
-
S&F for CP Waste coupling 40mm dia complete all as specified and directed.
8
-
-
Supply & Fix for Vitreous China premium Quality wash down water closet wall hung EWC white / Ivory/ with and including seat cover complete all as specified and directed.
4
-
-
S&F for SS jet system for Vitreous China wash down water closet pan (pedestal pattern), EWC, including fixing complete all as specified and directed.
4
-
-
S&F for PVC low level flushing concealed cistern (10 lts capacity) with ball valve float and handle ,syphonic action type concealed in wall including brackets and flush pipe of polythelene of low or high density or PVC 32 mm dia as specified and directed.
8
-
-
S&F SS grating of square/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and directed.
12
-
-
S&F 600 mm long flesible waste pipe for wash basin complete all as specified and directed.
12
-
-
S & F 15 mm bore stop/angle cock fancy type,chromium plated with capstan headed handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
30
-
-
S&F for CPVC SDR 11 pipes of pressure rating 10kg/Cm2 fixed to walls, ceiling, floor including necessary fittings complete all as specified and directed.
-
-
-
15mm bore
10
-
-
20mm bore
56
-
-
25mm bore
11
-
-
S & F vitreous China Urinal, full stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
2
-
-
S & F urinal spreader of cast copper alloy, fancy type with chromium plated, screwed both ends for iron pipe or for unions, complete all as directed by Engineer-in-Charge. fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed.
2
-
-
S & F vitreous china urinal partition white of size 310x700 mm terminating about 40 cm above floor line including brackets, clamps and necessary items to fix on wall complete all as specified and directed.
2
-
-
S & F Health faucet chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified complete all as specified and directed.
8
-
-
S & F 15 mm dia two way bib cock, 15 mm dia with wall flange, fancy type, made of cast copper alloy, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, ISI marked, complete all as specified and directed.
4
-
-
S & F 2-in-1 wall mixer with provision for overhead Shower with 115 mm long bend pipe on upperside, connecting legs & wall flanges, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed.
7
-
-
S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
7
-
-
S & F Chromium plated rain water shower rose of shower arm 350 mm long in bend shape with head of 200x200 size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
2
-
-
S & F 1000 mm x 1500 mm bevelled edge mirror of selected quality 5mm thick glass, with and including LED lights around the perimter of mirror, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated steel screws and cup washers complete all as specified and directed.
4
-
-
S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including RCC bedding and connection complete all as specified and directed.
1
-
-
S & F 150mm dia chromium plated convex shaving mirror fancy type rotate in 360 degree connected with movable 25 mm dia CP arm of 250 mm long including flanges complete screwed fixed with wall complete all as specified and directed.
2
-
-
S&F for 15 mm bib cock of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.
6
-
-
S&F floor door spring for glass doors Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
2
-
-
S&F for 15 mm concealed stop cock of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.
4
-
-
S&F for gun-metal, globe or gate valves 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
10
-
-
S&F liquid soap container soap dispenser of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
8
-
-
S&F towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.
9
-
-
S&F Brass cromium plate towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed.
9
-
-
S&F, 15mm Two way Angle stop valve, fancy type of CP brass, high pressure screwed for pipe or for union fixed complete all as specified and directed.
4
-
-
S&F for Stainless Steel Peg Set of 6 hooks ISI marked medium weight complete all as specified and directed.
4
-
-
S&F for frame less bevelled edge Mirror of selected quality glass mounted 4 mm thick, 600 x 450 mm size and fixed on wall with wooden/Plastic cleats and steel chromium plated screws complete all as specified and directed.
4
-
-
S&F SS towel rack 3 tier of size 1024 x 1024 wall mounted fixed with and including Chromium plated steel screws and wooden/plastic cleats complete all as specified and directed.
3
-
-
S&F 75 mm PVC SWR/ rain water pipe single socketed in any length with rubber ring joints laid in walls /floorcomplete all as specified and directed.
38
-
-
S&F 15mm bore chromium plated wash basin mixer screwed down high pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
10
-
-
S&F for viterous china wash down water closet pan (pedestal pattern) or wall mounted white fixing bolts, excluding flushing cistern and flush pipe including Seat cover, connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & CP Jet complete all as specified and directed.
4
-
-
S & F PVC cabinet mirror with shelve 450x600mm including mirror 5mm thick fixed to wall with steel cleat with shutter complete all as specified and directed.
4
-
-
S&F,32 mm bore PVC waste pipe and 650mm long flexible fixed in WHB complete all as specified and directed.
4
-
-
S&F Toilet paper holder of chromium plated of stainless steel complete all as specified and directed.
4
-
-
S & F grating doom 100mm dia of CP to Nahani traps complete all as specified and directed.
12
-
-
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed
4
-
-
S&F for 18 mm thick prelaminated particle board exterior grade prelamilated one side with decorative choice lamination and other side balancing white lamination fixed with screws, includind fixing with PVC beadind arround the particle board pannel complete all as specified and directed.
21
-
-
S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.
24
-
-
S&F for extruded aluminium alloy handle of 100 mm size fabricated type, anodised.complete all as specified and directed. .
16
-
-
M&L 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
0.1
-
-
M&L 2nd class hardwood plain fillets, square, rectangular or triangular in section, bullnosed, splayed, chamfered or rounded on one edge or face secured with nails or brads; sectional area n.exc 3 Sqcm complete all as specified and directed.
50
-
-
M&L, 50mm thick (average) cement concrete type B-1,1:2:4 (20mm graded aggregate) on top of roof surfaces of any description mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.
1000
-
-
S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.
12
-
-
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
9
-
-
S&F 75 mm dia PVC (SWR) Tee any radius complete all as specified and directed.
10
-
-
S&F 110 mm dia PVC (SWR) Tee any radius complete all as specified and directed.
8
-
-
S&F 110 mm dia PVC (SWR) Cowl complete all as specified and directed.
7
-
-
S&F 110 mm dia PVC (SWR ) pipes single socketed in any length with rubber ring joints laid in floor or fixed on walls with necessary clamp complete all as specified and directed
92
-
-
S&F for 110mm dia PVC(SWR) 'P' trap complete all as specified and directed.
4
-
-
S&F125/110 mm PVC (SWR) gully trap, setting and jointing with solvent cement complete all as specified and directed.
8
-
-
S&F PVC floor trap 75 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
24
-
-
S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500ltr capacity with connecting nipple,hoisted and fixed in position and making inlet or outlet connection complete all as specified and directed.
7
-
-
S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000ltr capacity with connecting nipple,hoisted and fixed in position and making inlet or outlet connection complete all as specified and directed.
3
-
-
S&F Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.
10
-
-
M&L stainless steel grade 304 curtain rod 25mm dia with caps/lobs and wall mounting bracket cutting in to length required at site complete all as specified and directed.
102
-
-
S & F for stainless steel kitchen plate rack size 750x 600x250 mm including fixing arrange ment to walls with rawel plug or wooden plugs complete all as specified and directed.
3
-
-
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste cupling, wastepipe, including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
3
-
-
M&L, bitumenous based primer conforming to IS-3384-1965 @ 0.40 Kg / Sqm including preparation of roof surface complete all as specified and directed.
920
-
-
M&L, for APP based polymeric membrane minimum weighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application method complete all as specified and directed.
Make- IWL,STP, Sika
994
-
-
M&L, 10 mm thick screed on top of roof surfaces of any description in cement mortar 1:4 mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.
885
-
-
M&L for apply coat of bituminouse aluminium paint @ 200 gm/Sqm (minimum) in two coats for after laying the APP membrane complete all as specified and as directed.
994
-
-
Supply only Liquid water proofing compound complete all as specified and directed.
28
-
-
M & L for sand filling under floors or in foundations or below Inter Locking Paver blocks including watering and consolidation complete all as specified and directed.
50
-
-
S & F 65mm thick non polished granite cobble stone tile of size75mmx 150mm as in parking place, walkway etc cpmplete all as specified and directed.
80
-
-
S & F 1.00 mm thick steel rolling shutters (push pull or manual type) with ball bearing, as specified including 1.25mm thick top cover, anchoring rod, hasp and staple and one coat of red oxide primer; erected in position as indicated including locking arrangment & safety locks 4 lever on both side/edges complete all as specified and directed. .
38
-
-
M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),100 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.
900
-
-
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
19
-
-
M&L 80 mm thickness machine pressed precast colour concrete interlocking paver block M-40 grade any shape and size confirming to IS 15658-2006 with grey cement and pigment glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed.
900
-
-
Removing excavated material n exc. 50m and depositing where directed at alevel n exc 1.5m above the starting point complete all as specified and directed.
250
-
-
M&L for 450 mm bore Reinforced concrete pipes, class NP3, laid and jointed with collars on PCC bed as in Hume pipe complete all as specified and directed.
15
-
-
M&L for cement concrete (1:3:6) type C2 using 40mm graded stone aggregate in bed to drain pipe including packing under and hunching against the sides of pipes after they are laid and tested complete for pipe size of 450mm bore complete all as specified and directed.
2
-
-
M&L, 15mm thick rendering on brick or stone/concrete any surfaces in cement mortar 1: 4 on mixed with WPC @ 0.4% by weight of cement, surface finished even and fair without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.
70
-
-
M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate in coping including form work if required complete all as specified and directed.
8
-
-
M&L for cement concrete (1:3:6) type C2 using 40mm graded stone aggregate in bed to drain pipe including packing under and hunching against the sides of pipes after they are laid and tested complete for pipe size of 150mm bore complete all as specified and directed.
140
-
-
M&L for 180 mm (OD) bore DWC pipes, laid and jointed with collars fixed on PCC bedding complete all as specified and directed.
150
-
-
M&L for providing cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) in surfaces channels drains and benching including form work and finishing fair and smooth using extra cement (forming fair finished channel shall be measured and paid for separately) complete all as specified and directed.
2
-
-
M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone agg) as in cover slabs for man holes and set in CM 1:4 including necessary from work complete all as specified and directed. Note: Reinforcement and form work shall be measured paid separately.
2
-
-
M&L for construction of septic tank including excavation, in any type of soil, foundation in PCC 1:2:4 type B-2, brick work in cement mortar 1:4, RCC Nominal Mix type B-1 1:2:4 (using 20 mm graded stone aggregate) with and including reinforcement work, slab cover including RCC precast cover slab having 6 mm plate embedded all around with angle iron frame, vent pipe shaft and sludge chamber etc complete for 25 users complete all as specified and shown in drawing No. CEBZ/TD/76/2011 Sht No 1/2 to 2/2 .
1
-
-
M&L for construction of soakage well including excavation, in any type of soil, foundation in PCC 1:3:6, wells of honey combed brick work in CM 1:4 and solid in RCC Nominal Mix type B-1 1:2:4 (using 20 mm graded stone aggregate) with and including reinforcement work including intercepting chamber, screen chamber brick work in CM 1:4, RCC cover slab in nominal mix type B-1 1:2:4 , filling with brick bats, complete of size 1.20 m in dia and 3.00 m in deep (effective depth) all as specified and shown in drawing No. CEBZ/TD/78/2011 Sht No 1/2 to 2/2 .
1
-
-
M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
70
-
-
M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams , plinth beams , base for coloumns and mass concrete etc. complete all as specified and directed.
9
-
-
M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in coloumns , pillars , piers , posts and struts etc complete all as specified and directed.
10
-
-
M&L for reinforced cement concrete Design mix M-25 (using 20 mm graded stone aggregate ) as in lintel band/tie beam etc. complete all as specified and directed.
3
-
-
M&L, Formwork to sides of concrete, in foundations, footings,base of columns & plinth beams, etc in flat for rough finshed surfaces of concrete complete all as specified and directed.
60
-
-
Form work to Columns/pillar/post etc , square/rectangular, rough finish surfaces of concrete complete all as specified and directed.
65
-
-
Form work to lintel band/tie beam etc , square/rectangular, rough finish surfaces of concrete complete all as specified and directed.
40
-
-
M&L, Preparation of new plaster surfaces of wall, and applying two coat of cement base paint over priming coat of alkali resistant primer complete all as specified and directed.
34
-
-
S & F steel framed work as in doors or gates of angle or ther section with gusset plates, rails braces etc, complete Doors etc to be prepaired for hanging or sliding with and including either hooks ,pintel ,hold fast and hinges or steel hanging door fittings complete all as specified and directed.
650
-
-
M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm width or girth etc. complete all as specified and directed.
18
-
-
M & L for natural stone cladding of 15 to 20mm thick granite or trap stone fixed over 10mm thick plaster rough finish in CM 1;4 and cement slurry 3Kg per Sqm to the entire back of the stone cladding on bdry wall etc. complete all as specified and directed.
160
-
-
M & L for Composite Rain water Harvesting system 3 KLD Underground water storage tank of suitalbe capacity with first flush system 01 Set, Gravity Filer 01 PC, Delivery pipes 25mm size, 15 mtr Down take pipes 100mm size 15 mtr as shown on drawing complete all as specified and directed.
1
-
-
M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including metal box of required module factory made for mounting modular switch, modular socket, modular regulators etc with and painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside excluding PVC cover plates of required modules for mounting modular switches. sockets etc shall be measured seperately complete for the following:-
-
-
-
One light point controlled by one switch.
104
-
-
One Ceiling fan point controlled by one switch.
27
-
-
One Exhaust fan point controlled by one switch.
18
-
-
One Bell/Buzzer point controlled by one way 5 Amp push button switch.
3
-
-
One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.
10
-
-
One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.
25
-
-
Description all as per item No 223 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed.
30
-
-
S&F Modular Switch 1 way 6A, single pole one way complete all as specified and directed.
184
-
-
S&F Modular Switch 1 way 16A, single pole one way complete all as specified and directed.
30
-
-
S&F Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed.
35
-
-
S&F Modular SocketSocket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
30
-
-
S&F Modular bell push flush type, 6 Amps 1 module complete all as specified and directed.
3
-
-
S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.
3
-
-
S&F modular ceiling rose surface bakelite three terminal complete all as specified and directed.
60
-
-
S&F modular white cover plate with frame, 1/2/3/4 module complete all as specified and directed.
66
-
-
S&F modular white cover plate with frame, 6/8/12module complete all as specified and directed.
30
-
-
S&F Modular electronic step rotary type fan regulator of two module capacity 120 Watt, 240 volts, AC 50Hz complete all as specified and directed.
27
-
-
S&F modular Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for LED fittings complete all as specified and directed.
30
-
-
S&F LED 'T' Type Mirror light 4' long fitting 09/10 watt with provision of fixed in Lamp holder complete all as specified and directed.
30
-
-
S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.
33
-
-
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
10
-
-
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
20
-
-
Supply and fixing 4 Watt Round LED Button COB Light for POP/ Recessed Lighting. Enjoy optimal brightness and energy efficiency with this sleek and premium lighting solution. Its compact design seamlessly integrates into ceiling, providing a modern and unobtrusive lighting solution complete all as specified and directed.
40
-
-
Supply and fixing LED Foot light of 4 Watt warm light colour with aluminium die cast material,acrylic lampshade material of 220 Volt AC ,Outdoor type with dimension of 8.1 cm x 14.7 cm x 9.1 cm complete all as specified and directed.
10
-
-
Supply and fix LED Kerb stone light ( RED,Yellow, Blue ,White , Amber,Green) fittings of length 500mm, height 200mm and width 150mm, with curb angle 45 degree, operatind voltage 36 volts DC power supply, having foundation hight 40mm, foundation width 20 mm, foundation stand hole 10 mm dia with 2 Nos of foundation rod having 8 mm dia to make curb stone theft proof and immoval,with load cayying / bearing capacity uoto 800 Kgs , in each curb stone LED strip lenght 465mm , Nos of LED in each strip 22, power consumption 2.34W per curb stone having one connectors with 2 Nos (1 male & 1 Female) with 2 core wire, Complete all as specified and directed.
40
-
-
Supply and fixing 4 way LED Outdoor waterproof IP 65 exterior wall light fixture lamp(warm white)(Up-Down-Left-Right) metal rectangular type ,Colour of led : 3000k wide voltage protection 160-360 volt all as specified and directed.
20
-
-
Supply and fixing 2 way LED Outdoor waterproof IP 65 exterior wall light fixture lamp(warm white)(Up-Down) metal rectangular type ,Colour of led : 3000k wide voltage protection 160-360 volt all as specified and directed.
20
-
-
Supply and fixing Chandelier of E-14 LED bulbs with 16" Dia with crystal quality K9 ,PVD colour finish,4Ft Adjustable hanging ceiling suspension complete all as specified and directed.
2
-
-
Supply and fixing Chandelier of E-14 LED bulbs with 2' Dia with crystal quality K9 ,PVD colour finish, 2' Adjustable hanging ceiling suspension all as specified and directed.
4
-
-
Supply and fixing decorative Off white wall bracket type light 9 watt in cyclinderical shape all as specified and directed.
8
-
-
Supply & fix BEE Service value 6.0 BLDC Ceiling fans 1200 mm sweep with decorative Underlight ,control with fan regulator remote with battery down rod all accessories required including regd length of 3 core 1.0 sqmm PVC multistranded copper conductor, PVC connector for proper hanging of fan and testing complete all as specified and directed.
27
-
-
Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
2
-
-
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 2.5 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
200
-
-
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
200
-
-
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
150
-
-
S&F sheet metal enclosure double door distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 125 Amp,4 pole & Including MCCB 125 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed.
4
-
-
S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
3
-
-
S&F MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
2
-
-
S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.
5
-
-
S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.
42
-
-
Supply and fixing LED light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.
21
-
-
Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.
80
-
-
Taking down ceiling fan/Exhaust fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and directed.
12
-
-
Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.
124
-
-
Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed.
2
-
-
Taking down unserviceable TPN DB with MCB's of any make/capacity, complete, all as specified and directed.
1
-
-
Taking down unserviceable lamp switch 16 Amps/ Socket 16 amps/Lamp holder/ Ceiling Rose. any make/capacity, complete, all as specified and directed.
21
-
-
Taking down unserviceable LED Tubelight any make/capacity, complete, all as specified and directed.
19
-
-
Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specifies and directed.
50
-
-
All as per item No 266 above but of size 20 mm dia complete all as specified and directed.
10
-
-
Taking out of old cable of size 16/25/35 sqmm 3.5/4 core including excavation R&F work complete all as specified and directed.
3
-
-
Taking down unserviceable Switch 5Amps/ socket 5 amps/Bell Push/ 2 way Switch etc complete all as specified and directed.
107
-
-
Supply & fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all assessories pvc pipe for making water connection of hot & cold water pipe etc hanged in wall with steel fastness, nut bolts complete all as specified and directed.
5
-
-
Supply, installation,commis-sioning of Water cooler fully stainless steel, electric driven single phase having approx 40/80 ltr storage and nominal cooling capacity & making water connection complete all as specified and directed.
2
-
-
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep copper wound with double ball bearing, blades, and frame and louvers complete all as specified and directed.
18
-
-
Supply and fix refrigerator, electric driven (single phase), upto 180 Litres .BEE 5 star rated complete all as specified and directed.
1
-
-
Supply and installation of hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2.of capacity 2 TR capacity including making electrical connection to indoor/outdoor units complete all as specified and directed.
10
-
-
Supply and installation 5 Star rating Cassette type units indoor/outdoor complete with cordless remote control unit ,twin rotary compressor, single phase units 220V - 240V, 50 Hz of capacity 2TR complete all as specified and directed.
10
-
-
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.
22
-
-
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 TR complete all as specified and directed.
2
-
-
Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings of size 50 mm including fillings in trenches complete all as specified and directed.
160
-
-
S&F tube Medium' grade galvanised with all fitting fixed to wall/floor, of 20 mm dia including fillings complete all as specified and directed.
120
-
-
S&F CPVC ball valves with handle rotate 90 degree to close and open the flow of water with size of 50 mm dia complete all as specified and directed.
1
-
-
M&L Cutting of existing DI Pipe for inserting pipes in position for insertion of ferrule including nut bolt clamp, for branch connection of 50 mm dia from bore of existing 300 mm DI pipe complete all as specified and directed.
1
-
-
M&L Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.00 metres long) including painting of poles with two coats of aluminium paint over a coat of red oxide primer on all exposed surfaces including pasting of radium reflector band/strips complete all as specified and directed.
7
-
-
Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following 120 Sqmm 3.5 Core complete all as specified and directed.
60
-
-
Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following 35 Sqmm 3.5 Core complete all as specified and directed.
140
-
-
Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following 10 Sqmm 2 Core complete all as specified and directed.
150
-
-
Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with GI Brackets bending & shaping of size 32 mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary clamps, brackets and bolts to fixing on pole complete all as specified and directed.
7
-
-
S & F Photometric sensor outdoor type 220-240 volt ambient light 5-15 lux working temparature -20~+40C working humidity 93% RH along with pvc connection of 6 to 10 amp capacity complete all as specified and directed.
7
-
-
S&F Weather Proof PVC Junction Box with bus bar of capacity 40 Amp including one SPN MCB of 20 Amp Capacity & proper arrangement for passing incoming/ outgoing LT cable and fixed to pole with 02 Nos MS clamps, Nuts bolts and washer etc complete including self closing locking arrangement complete all as specified and directed.
7
-
-
M&L Sand filling in trenches with clean dry unwashed river sand free from sharp particles, gently punning around the cables complete (15 cm + 8cm but measured only 18cm after punned down) all as specified and directed.
24
-
-
M&L Bricks,old size sub class B laid in trenches with width wise along the aligment of the cable as protection complete all as specified and directed.
3000
-
-
S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall/pole and floor of 50 mm dia for cable protection including clamps ,nut bolts complete all as specified and directed.
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%