Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 Sep 2024
Closing Soon21 Nov 2024
Tender Amount₹ 1,36,00,000
Costs
EMD
₹ 2,11,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_675501_1Tender No
CWE/JHA/GWL/TOKEN/42 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Surface excavation not exceeding 30cm and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
180
-
-
Removal excavated material n.exc 50m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.
63
-
-
M&L 75mm thick for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) 1 part bitumen 85/25 and 3 parts of sand complete all as specified and directed. Note:-Rate is deemed to be inclusive of materials against forming & filling of joints.
70
-
-
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense of soil complete all as specified and directed.
513
-
-
Returning, filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
287
-
-
Removing excavated material exc. 50m and not exceeding 250 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
157
-
-
M&L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area complete all as per specified and dirceted.
150
-
-
M&L Treating the backfill contact with foundation at the rate of 7.5 liters of emultion per sqm of vertical surface (Area of Sub Structure in contact with bacjfill to be measured) complete all as per specified and dirceted.
50
-
-
M&L Treating the top surface of filled at the rate of 5 litres of emulsion per sqm of surface area complete all as per specified and dirceted.
160
-
-
M&L Treating thesoil under plinth protection at the rate of 5 litres of emulsion per sqm of surface area complete all as per specified and dirceted.
53
-
-
M&L Treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per sqm of surface area complete all as per specified and dirceted.
70
-
-
M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified.and directed.
46
-
-
M&L providing M25 Design mix (using 20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
80
-
-
M&L for providing M-25 Design mix ( using 20 mm graded stone aggregate ) as in Roof beam, lintel band, cantilevers bressummers, lintels over 1.5m span etc. complete all as specified and directed.
10
-
-
M&L for providing M-25 Design mix (using 20 mm graded stone aggregate ) as in coloumns , pillars , piers , posts and struts etc. complete all as specified and directed.
2.4
-
-
Formwork to sides of concerte foundation, footings, bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beams, and similat work vertical or to batter complete all as specified and directed.
220
-
-
Formwork to sides of concerte roof beams, sides and soffits (if any) and similat work vertical or to batter complete all as specified and directed.
10
-
-
Form work to Columns, square/rectangular, rough finish surfaces of concrete complete all as specified and directed.
120
-
-
Mild steel TMT bars 8mm to 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
1600
-
-
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
9180
-
-
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
986
-
-
M&L for Pre-cast cement concrete block masonary with solid block type B-1 1:2:4(using 20 mm graded stone agg ) exc 10 cm in width and setting in mortar 1:4 complete all as specified and directed.
30
-
-
M&L for brick work with fly ash (old size) bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 below plinth beam in steps complete all as specified and directed.
5
-
-
M&L Rendering 10 mm thick on fair faces of brick or concerte surfaces in cement mortar (1:4) finished even and fair complete all as specified and directed.
100
-
-
Providing and fixing in position, for outer walls 170 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 2.5 mm dia G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall jointed with angular truss connecting wire. The EPS core shall consist of 100 mm thick EPS of density not less than 15 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of EPS panel manufactures, the manufactures shall give complete 2D plan design, structural design , 3D model design before commencement of work having valid BMPTC certificate complete all as specified and directed.
160
-
-
Providing and fixing in position, for inner walls 150 mm thick factory made Expanded Polystyrene Core (EPS Core) wall panels consisting of EPS core sandwiched between two Engineered sheets of welded wire fabric mesh duly finished with shortcrete materials on outer faces. The fabric mesh shall be made of 2.5 mm dia G.I. wire mesh with 50 mm pitch in both the directions and on both faces of the wall . The EPS core shall consist of 80 mm thick EPS of density not less than 15 kg/ per cum. Both the outer faces of the panel shall be finished by applying the layer of 35 mm thick cement mortar 1:3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting/guniting equipment etc at a pressure not less than 1 bar (100Kn/m2) and both surfaces finished with trowel. Fixing operations of wall panels shall be completed in all respect as per drawings and specifications and under the overall direction of EPS panel manufactures, the manufactures shall give complete 2D plan design, structural design , 3D model design before commencement of work having valid BMPTC certificate complete all as specified and directed.
230
-
-
Providing and fixing in position for roof 185 mm thick factory made Expanded Polystyrene Core (EPS Core) roof/floor panels made of 2.5 mm dia G.I. wire mesh with 50 mm pitch in both the directions and on both faces of panel jointed with angular conneted truss wire,. The EPS core shall consist of 100 mm thick EPS of density not less than 15kg/ per cum. The bottom side of the panel shall be finished by applying a layer of 35 mm thick cement mortar 1: 3 {1 cement: 3 coarse sand (not having more than 40% stone chips of size upto 6 mm)} À with the help of shotcreting equipment etc at a pressure of not less than 1 bar (100Kn/m2) and surface finished with trowel. The top face of the panel shall be provided and finished by applying 50 mm thick layer of cement concrete 1:1.5: 3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). including neassary support for EPS panel /concerete. Fixing operations of roof/floor panels shall be completed in all respect as per drawings and specifications and under the overall direction EPS panel manufactures, the manufactures shall give complete 2D plan design, structural design , 3D model design before commencement of work having valid BMPTC certificate complete all as specified and directed.
225
-
-
M&L for mild steel section rectanglur pipes (SHS) for coloumns, beams as in frame for building etc, complete all as specified and design given by EPS panels manufacturer complete all as specified and directed.
100
-
-
S&F steel mesh 50mmx50mmx2.5mm thick fixed with EPS Panels at Corner junctions and other locations as in I mesh, L mesh, C mesh complete jointed with panel using cliching clips complete all as specified and directed.
350
-
-
M&L for Polypropylene construction Fiber complete mixed with concerete @ 1Kg/CUM complete all as specified and directed.
45
-
-
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantas and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) per specification complete all as specified and directed.
10
-
-
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
Note: stainless steel butt hinges and fixed with S S screws shall be paid separately.
3
-
-
S&F for Anodised aluminium window and ventilator shutters with powder coated, side hung/ sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, including anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
32
-
-
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc and Powder Coating complete all as specified and directed.
250
-
-
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.
30
-
-
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.
50
-
-
S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed
20
-
-
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
12
-
-
Supply and fixing ISI marked alumunium sliding door bolts with nuts and SS screws etc. complete, 300mm long x 16 mm dia of shoot complete all as specified and directed..
13
-
-
S&F 150 mm aluminium handle cast type anodized fixed with SS screw complete all as specified and directed.
24
-
-
S&F Aluminium anodised, barrel tower bolts of extruded section of length 150 mm and fixed with SS screws complete all as specified and directed.
20
-
-
S&F 100 mm Butt hinges, extruded Alumunium anodised and fixed with SS screws complete all as specified and directed.
42
-
-
Supply and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete all as specified and directed.
15
-
-
M&L for Screed bed or bedding layers of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
178
-
-
S&f broken stone or boulders hard core of gauge n.exc. 63mm deposited, spread and levelling in layers n. exc. 15 cm thick watered and ramed to a true surface complete all as specified and directed.
45
-
-
M&L for PCC (1:4:8) type D-2, (using 40 mm graded stone aggregate),75 mm thick, as in sub base for floor, finished even and rough complete all as specified and directed.
175
-
-
M&l for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of
each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
165
-
-
All as per Ser item No 50.00 above but as in dado/ skirting etc set and jointted in neat cement surry and pointed in white or coloured cement to match to floor including 10mm thick rendering in CM 1:4 complete all as specified and directed.
18
-
-
M&l for non skid coloured ceramic tiles 7 to 8 thick (Square/reactengular) area of each tile exceeding 0.11 sqm but not exc.0.18 in floor etc set and jointted in neat cement surry and pointed in white or coloured cement to match to floor complete all as specified and directed.
13
-
-
M&L for glazed ceramic tiles of size 300x450x7-8mm thick on certical surfaces suck as skirting/dado set and jointed in near cement slurry point jointed in white or coloured cement to match to floor including 10mm thick rendering in CM 1:4 complete all as specified and directed.
32
-
-
M&L for Granite 18- 20 mm thick over including 10 mm thick CM 1:4 (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms / reception and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rubbing and polishing/ bevelled edge rounding the edge at exposed face complete all as specified and directed.
20
-
-
S&F 12mm thick Toughned Glass frameless as in hinged doors, automatic doors and similar work including cutting to shape, drilling holes , screws, clamp and accessories etc complete all as specified and directed.
5
-
-
S&F 10mm thick Toughned Glass fixed to wall with necessary anchors, screw etc and similar work including cutting to shape, drilling holes , screws, clamp with necessary anchors, and similar accessories etc complete all as specified and directed.
2
-
-
S&F floor door spring for glass doors Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.
2
-
-
Supply and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) including frame work & G.I wire mesh complete all as specified and directed.
Note : The rate for metal frame work and reinforced with G.I. wire dia 1.4mm mesh included in the quoted rate, no extra shall be paid.
50
-
-
S&F 75 mm PVC SWR/ rain water pipe single socketed in any length with rubber ring joints laid in walls /floorcomplete all as specified and directed.
12
-
-
S&F 110 mm PVC SWR pipe/ rain water pipe single socketed in any length with rubber ring joints laid in walls/floors complete all as specified and directed.
40
-
-
S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.
4
-
-
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
5
-
-
S&F 75 mm dia PVC (SWR) Tee any radius complete all as specified and directed.
2
-
-
S&F 110 mm dia PVC (SWR) Tee any radius complete all as specified and directed.
4
-
-
S&F 110 mm dia PVC (SWR) Vent Cowl complete all as specified and directed.
5
-
-
S&F125/110 mm PVC (SWR) gully trap, setting and jointing with solvent cement or adhesive complete all as specified and directed.
2
-
-
Supply & Fix for Vitreous China premium / 1st Quality wash down water closet wall hung EWC white / Ivory/ with PVC seat cover without cistern complete all as specified and directed.
2
-
-
S&F for PVC low level flushing concealed cistern (10 lts capacity) with ball valve float and handle ,syphonic action type including brackets and flush pipe of polythelene of low or high density or PVC 32 mm dia as specified and directed.
2
-
-
S&F for counter type vitreous china wash hand basin ,white, oval round shape without rim, size 550x400 mm including chain and plug and porcelain stopper, brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
2
-
-
S&F for PVC connection 15mm bore with PTMT nuts and 600 mm long complete all as specified and directed.
8
-
-
S&F for 15 mm concealed stop cock of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.
6
-
-
S&F for 15 mm bib cock of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.
2
-
-
S&F for 15 mm Pillar Tap of chromium plated fancy type copper alloy screwed down high pressure for iron pipe or for unions fixed complete all as specified and directed.
2
-
-
S&F for Waste coupling of CP (half or full threaded) complete all as specified and as directed.
2
-
-
S&F for 1mtr long flexible waste pipe for wash basin complete all as specified and directed.
2
-
-
S&F for angle cock of CP Fancy type any colour high pressure screwed for iron pipe complete all as specified and directed.
6
-
-
S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 500ltr capacity with connecting nipple,hoisted and fixed in position and making inlet or outlet connection complete all as specified and directed.
2
-
-
S&F Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and directed.
2
-
-
S&F PVC floor trap/ nahani 75 mm dia with CP grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.
5
-
-
S&F Brass cromium plate towel rail 20mm dia D type 60cm long between flanges complete all as specified and as directed.
2
-
-
S&F frameless with LED light of 600x450mm beveled edges mirror of selected quality mounted fixed to wall with rawal plug and screws complete all as specified and directed.
2
-
-
M&L, for APP based polymeric membrane minimum weighing 3.5kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application method complete all as specified and directed.
230
-
-
M&L for Bitumen primer for use in pasling of waterproofing and damp-proofing treatment complete all as specified and directed.
50
-
-
M&L, 10mm thick rendering on top of roof surfaces of any description in cement mortar 1:4 mixed with liquid WPC @ 0.4% by weight of cement, surface finished even and smooth without using extra cement complete duly maintained proper slope all as specified and directed. Note : WPC shall be measured & paid seperately.
230
-
-
Supply onlyLiquid water proofing compound complete all as specified and directed.
10
-
-
S&F UPVC pipes of pressure rating 10kg/Cm2 fixed complete to walls, ceiling, foor etc with steel clips/clamps complete all as specified and directed.
-
-
-
25mm bore
15
-
-
20mm bore
25
-
-
M&L for preparation new plastered surface of wall with rustic textured finish of exterior weather coat paint of required shade of new work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied 2.20kg/10 sqm with smooth surface complete all as specified and directed.
260
-
-
M&L for prepairing new plastered surface of wall with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with smooth surface complete all as specified and directed.
650
-
-
M&L for preparing newly plastered surfaces of celing and applying two coats of oil bound distemper over a coat of primer including 2mm thick putty to make the surface to be plain and smooth complete all as specified and directed.
65
-
-
S & F for Aluminum Anodized snap Grid 610x610 mm frame work using aluminum anodized main Tee of size 25 x 35 x 1.50 mm & cross Tee of size 25 x 35 x 1.50 mm, aluminum anodized angle section 25x25x1.50 mm, supported hangers 4 mm dia G.I (upto 1200 mm length) adjusting level fixed to RCC roof slab/iron truss by means of ceiling cleat made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long including 12 mm thick gypsum board/ tiles for insulation and acoustic purpose of size 60 cm x 60 cm fixed with screws with staples on snap grid and finally treated the exposed surface with two coats of first quality synthetic enamel paint over a coat of primer complete, all as shown on drawing No CEAA/TD/68 sheet 1.1 and complete all as specified and directed.
Note:- The quoted rate is deemed to be inclusive of Aluminium snap grid, suspenders, 12 mm thick gypsum board & two coats of OBD painting to gypsum boards etc complete.
120
-
-
S & F IInd class hardwood Clean sawn Exc 15 & n.exc 25 Sq cm battens at 25 cm centres to centre including for all straight and/or raking cutting and waste; also for a larger section batten at eaves, if required including malamini polishing to achive mirror image complete all as specified and directed.
12
-
-
M&L for 1.5 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved and fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
4
-
-
S&F 18/19mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with SS screws of suitable size to timber frame work in any situation as in cup board shelves/shutter or similar work complete all as specified and directed.
15
-
-
S & F first class hard wood beading of size exc 3 mm x 20 mm in section, fixed with nails including polishing etc complete all as specified and directed.
35
-
-
S & F brass drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.
5
-
-
S & F steel locks 4 levers, drawer, grade I, size 50 mm of Godrej Pattern complete all as specified and directed.
5
-
-
S&F magnetic catcher auto closing for fixing in cupboard, to hold the shutter in closed position, complete all as specified and directed.
5
-
-
S & F telescopic channel 600mm long, heavy duty. zinc coated complete all as specified and directed.
10
-
-
M&L for ECHS crest of over all size not less than 45x45 cm fixed to glass partition/door with fluorecent neon light complete all as specified and directed.
50
-
-
M&L for ECHS letters or figures (Block. Roman, Italic or Indian made with steel SS-304 Grade) writing n exc. 30 cm high including Stops, commas, short lines, dashes, hyphens, brackets, arrows, etc. fixed to glass partition/door with suitable adhesive complete all as specified and directed.
35
-
-
Material & Labour for providing and fixing stainless steel (Grade 304) railing and similar item etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
100
-
-
M&L for 1 cm wide writing letters or figures (Block, Roman, Italic, Indian) n.exc 7.5 cm in height by encraving engraved on steel plate for name plate etc complete all as specified and directed.
15
-
-
S&F 450 mm long 32 mm dia stainless steel (Grade 304) as in purpose made handles, cast type, polished bright complete all as specified and directed.
4
-
-
M & L for preparation of existing surface on floor/wall tiles or pavements and the like exc 10cm wide with fluorecent paint, white or golden yellow in two coats complete all as specified and directed.
6
-
-
M & L, for 100 mm thick cement concrete in, sub floors etc type D-2 1:4:8 (using 20mm graded stone aggregate) complete all as specified and as directed.
250
-
-
M&L for River Sand filling under floors or in foundations including watering and consolidation and protection of cable (18cm thick) complete all as specified and directed.
35
-
-
M&L for machine pressed precast concrete interlocking paver lock any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade, with gray cement and pigment, complete all as specified and directed
250
-
-
M & L, providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
1
-
-
M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius built, in cement mortar 1:4 in any position complete all as specified and directed.
63
-
-
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even & smooth complete all as specified and as directed.
460
-
-
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick, flat and fair finished surfaces, complete all as specified and as directed.
10
-
-
M&L for 600 mm bore Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.
5
-
-
M&L Plain cement concrete (1:3:6) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed.
2.5
-
-
M&L for reinforced cement concrete 20 mm graded stone aggregates (design mix M-25) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed.
2
-
-
Removal excavated materials (soil) exceeding 250 meters but not 500 meters and deposting where directed at a level not exceeding 1.5 meters above the starting point, complete all as specified and directed.
168
-
-
M&L for 180 mm dia (outer dia) DWC drain pipes laid in trenches and jointed complete all as specified specified and directed.
40
-
-
M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2, DWC pipe complete all as specified and directed.
38
-
-
M&L for cement concrete type B-1,(1:2:4) using 20mm graded agrregate in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.
18
-
-
Construction of Septic tanks including excavation, in any type of soil, foundation In PCC 1:2:4 type B-2, brick work in CM 1:4, RCC M20 (Nominal Mixed) (with and including reinforcement), Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent pipe shaft and sludge chambers etc complete for 100 users complete all as specified and directed and shown in drawing No. CEBZ/TD/76/2011 Sheet 1/4 to 4/4.
1
-
-
Construction of Soakage wells including excavation in any type of soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-20 (Nominal Mixed)Concrete type C2, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-20/ Brick Masonry/ filling with brick bats, complete of size 1.8 m in dia and 4.50m in deep (effective depth) all as specified and directed shown in drawing No.CEBZ/TD/76/2011 Sheet 1/2 & 2/2.
1
-
-
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 mixed with water proofing compound and surface finished even and smooth on external face of walls complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately
12
-
-
Supply only water proofing compound (ISI Mark) complete all as specified and directed.
3
-
-
M&L for cement concrete in surface channels and drains type C-1, 1:3:6 (using 20mm graded stone aggregate) complete all as specified and directed.
12
-
-
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends including form work etc complete all as specified and directed.
Note : Inner girth shall only be measured.
4
-
-
M&L for precast RCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in drain cover,set in CM 1:6, complete all as specified and as directed
5.2
-
-
Excavation in post holes (or similar holes) n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50 and making good surface in soft/loose soil all as specified and as directed.
13
-
-
M&L for angle iron posts and struts in fencing including cutting tops to shape (swan neck) or as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work including 40x6mm flat iron for holding chain link fencing conforming to Fe-290 Gde E-165 all as specified and as directed.
340
-
-
M&L for 10mm dia mild steel screw bolts, with hexogonal or square at one end and srewd the other or screwd both ends each screwd end to be fitted with washer and one hexogonal or square length exc 15cm and n. exc 22.5cm all as specified and as directed.
75
-
-
M&L, preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
25
-
-
Fixing only galvanised chain link fencing of 4mm dia GI wire, 75 x75 mm mesh opening including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed.
63
-
-
Supply only galvanised chain link fencing of 4mm dia GI wire,75 x75 mm mesh opening including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed. Note:- Fixing of the same considered and paid seperately.
220
-
-
M&L for Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm specing and staining and fixing to any type of standard rails including securing or lying at crossing with and provn of MS galvanised pins etc complete all as specified and directed.
1.2
-
-
S&F steel framed work as in doors or gates of angle or ther section with gusset plates, rails, braces, etc., complete. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified and directed.
500
-
-
M&L for preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed.
400
-
-
M&L for Concertina coil 600mm dia of each coil and 10Nos coil/round for one meter fixed with top of angle iron Y Section of boundary wall complete all as specified and directed.
30
-
-
Excavating over areas, n exc 1.5 m deep and getting out in depth and getting out in soft / loose soil complete all as specified and directed.
30
-
-
Excavating over areas, exc 1.5 m deep and n. exc 3.0 mtr getting out in depth and getting out in soft / loose soil complete all as specified and directed.
8
-
-
M&L for RCC (Design mix) M-25 (20 mm graded stone aggregates) in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.
2
-
-
Formwork to faces of walls, retaining walls, abutments, arapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, flat for rough finished surfaces complete all as specified and directed.
30
-
-
M&L, 15mm thick rendering on brick or stone/concrete any surfaces in cement mortar 1: 4 on mixed with WPC @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid seperately.
35
-
-
M&L for MS round bar 25mm dia rungs as in ladder fixed on wall complete all as specified and directed.
100
-
-
M&l for PVC water bar 6mm thick and 100mm wide as in construction joint in desired position complete all as specified and directed.
50
-
-
M&L for epoxy sealing compound complete all as specified and directed.
25
-
-
S&F for CI pipes 150mm dia with flanged ends, vertically cast, class A in any length laid in trenches complete all as specified and directed.
3
-
-
M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-
Note : Modular cover plats shall be measured and paid seperately.
-
-
-
One light point controlled by one switch.
44
-
-
One Ceiling fan point controlled by one switch.
17
-
-
One Exhaust fan point controlled by one switch.
6
-
-
One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.
14
-
-
One modular 3 pin/5 pin switch socket outlet, 5 Amps on independent board.
42
-
-
Description all as per item No 145 above but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed.
44
-
-
S&F Modular switch 1 way 6A,1 module complete all as specified and directed.
123
-
-
S&F Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and directed.
56
-
-
S&F Modular switch 1 way 16A,1 module 15 Amp complete all as specified and directed.
44
-
-
S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.
44
-
-
S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.
60
-
-
S&F Modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed.
17
-
-
S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate modular suitable for batten fittings ISI Marked complete all as specified and directed.
10
-
-
S&F LED Lamp 09/10, efficiency 130 lumen/wattwatt complete with 5 star rating complete all as specified and directed.
10
-
-
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade confirming to IS 14930 (Part-I) 2001,(ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
150
-
-
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
250
-
-
S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting ,Efficiency 100 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.
34
-
-
Supply and fixing BLDG LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.
4
-
-
M&L for bending & shaping of 40 mm dia galvanised iron pipe light grade over all length 0.60 mtr including necessary clamps, brackets and bolts mtr etc to fixed on wall/pole as per site requirement including fixing on pole with light fittings all as specified and directed.
4
-
-
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed.
1
-
-
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm all as specified and directed.
6
-
-
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down complete all as specified and directed at site.
1
-
-
S&F MCB DB, sheet metal enclosures double door SPN 12 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
8
-
-
S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.
8
-
-
S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.
80
-
-
S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp complete all as specified and directed.
6
-
-
S&F for new modular cover plate of different size including fixing ,the existing modular switchs, modular socket ,modulare regulator and refixing them in new board complete all as specified and directed.
-
-
-
White cover plate with frame but 2/3/4 module
86
-
-
White cover plate with frame but 6 module
12
-
-
White cover plate with frame but 8/12 module
16
-
-
S&F MS well cap suitable for 200 mm dia MS casing pipe complete all as specified and directed.
2
-
-
Supply and fix MS bail plug 200 mm dia fixed and welded complete all as specified and directed
1
-
-
S&F MS well clamp suitable for 200mm dia MS casing pipe with 4 Nos 18 mm dia bolts nuts washers clamp fabricated from MS flat iron 100mmx100mmx16mm thick duly drilled holes of suitable size including painting with two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and as directed
10
-
-
All as per Ser item No 170 above but suitable for 80 mm dia Gl column complete all as specified and directed.
1
-
-
M & L for Trial bore of 250 mm dia upto 200 meter depth below ground level in any kind of soil strata including hard stone/boulder etc. Note:- Rate deemed to be included for following :- (a) Transportation of DTH machine for drilling of the bore well to the site of bore well and removal of the DTH machine with all T&P and boring accessories after completion of bore well including site clearance complete all as specified and directed. (b) M&L for resistivity survey for the location/point for drilling of borewell at site ascertain the expected availability of water and submit the report with the following recommendations :- (i) Location of proposed bore well duly marked on drawing. (ii) Depth of proposed bore well to be drilled. (iii) Expected yield of proposed bore well. (iv) Position of plain/slotted MS casing pipe to be incorporated in the bore wellduly marked on drawing. (v) Expected strata to be encountered during drilling of proposed bore well or any other data/inforniation if considered necessary. (c) A certificate from the contractor has to be submitted by ensuring that the process of the work has been carried out as per the guidelines before processing of payment
120
-
-
Supplying lowering and fixing into bore holes MS (ERW) plain pipe 200mm dia both ends plain having thickness 6 mm wall thick as per IS-4270/3589 including welding of socket at site on both ends complete all as specified and directed.
60
-
-
Supplying, lowering and fixing into bore holes MS (ERW) pipe 200mm dia duly perforated with 2mmx50mm longitudinal holes having 6mm wall thickness as per IS-4270/3589 with and including welding of sockets at site on both ends complete all as specified and directed.
20
-
-
Supply and packing pea size gravel of size 3 to 5 mm round size arround the casing pipe to the entire depth of bore hole up to ground level complete all as specified and directed.
2
-
-
M&L Development of bore well by means of DTH machine followed by high capacity compressor to its optimum yield till clear water of potable quality free from sand / silt is obtained including draw down performance end yiled test of the tube well complete all as specified and directed.
20
-
-
M&L for chemical / bacteriological analysis and polability test of water obtained from bore well from govt approved water testing lab and submitting the test report in duplicate copy complete all as specified and as directed.
1
-
-
M&L. for yield test of bore well by contineously pumping for 16 hours spell to determine safe pumping yield complete all as specified and as directed. Note: Pumping set equiped for testing yield shall be used and pump motor submersible cable column pipe and other accessories will be arranged by the contractor at no extra cost.
1
-
-
Supply and lowering GI column pipe heavy duty 50 mm dia 6 mtr in length both side MS flanged (12mm thick) duly welded including nuts, bolls, washers and rubber flange of suitable size complete all as specified and as directed.
80
-
-
M&L Submersible pump, electric driven 415 V, TP suitable for 250 mm dia bore well (Casing pipe size 250/200mm) supply and Install complete of 7.5 HP inclusive of 40 metre long submersible with suitable size cable and 40 meter long cable and motar starter complete all as specifed and directed.
1
-
-
Supply and lay submersible cable three core, copper conductor,flat type 1100 V grade size 10 Sq mm complete all as specified and directed.
60
-
-
Supply and laying and commissinging cable XLPE insulated screened PVC bedded ,galvonized steel strip or wire armoured ,electric power (cables heavy duty )1100 v grade with stranded alluminium conductor of size 25 Sq MM 4 core all specified and directed.
100
-
-
S&F LT Panel, installing, testing and commissioning of outdoor LT panel board 415 Volts, 4 wire, 3 phase factory fabricated powder coated, cubical, weather and vermin proof outdoor kiosk type, front opening, floor mounted made out of 3.15 mm thick CRCA sheet of size suitable for mounting the its accessories with electrolyte connection of the equipment/accesories to be fixed, cable glands, lugs, mounted on steel angles supports of suitable size with grouting 4 Nos supports in PCC 1:2:4 type B1 complete with separate compartment for housing with proper arrangement for air circulation and including the following accessories all as specified and directed.
(a) Electrolytic aluminium bus bar 200 Amps in distant colour with epoxy supported insulators - 01 Job (04 Nos).
(b) MCCB 4 pole,63 Amps, 415 Volts, rupturing capacity 16 KA - 01 Nos for incoming, (Outgoing),MCB TPN 40 Amp - 02 nos, Starter of 7.5 HP motor - 01 Nos
(c) Volt Meter digital type 0 to 500 volts with selector switch - 01 Nos
(d) Ammeter digital type 0 to 100 Amps with CTs & selector switch - 01 Nos
(e) R,Y & B Phase indication lamp LED type ( Set of three ) - 01 set
1
-
-
Supply & fix cast iron sluice valve PN-1.6 confirming to IS 14846/2000, ISI mark with MS sprindle and iron wheel head with both end flanged with new rubber gascade,bolts, and nuts fixed at any location of size 80 mm dia all as specified and directed.
1
-
-
Material & Labour for CI non return valve (NRV) conforming to IS 5312, ISI marked with GM flap of size 50 mm and connected with necessary bolts, nuts & washers, gaskets etc complete including dismantling of old unserviceable non return valve complete all as specified and directed.
1
-
-
S&F tube Medium' grade galvanised with all fitting laid in trenches, of 20 mm dia complete all as specified and directed.
200
-
-
S&F tube Medium' grade galvanised with all fitting laid in trenches, of 25 mm dia complete all as specified and directed.
100
-
-
S&F tube Medium' grade galvanised with all fitting laid in trenches, of 50 mm dia complete all as specified and directed.
100
-
-
S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete fixed at any location all as directed of size 50 mm dia complete all as specified and directed.
1
-
-
S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete fixed at any location all as directed of size 25 mm dia complete all as specified and directed.
2
-
-
S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete fixed at any location all as directed of size 20 mm dia complete all as specified and directed.
6
-
-
Supply,Fix, commissioning and installation of Reverse Osmosis Plant of out put capacity of 25 Litres per hourwheel head screwed at both ends for iron pipes complete fixed at any location all as directed of size 20 mm dia complete all as specified and directed.
1
-
-
Supply and fix centrifugal monoblock pump set 2 HP , 50 x 40 mm single Phase complete all as specified and directed.
1
-
-
Supply and installation of copper wound transformer step up/ step down, indoor/outdoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS:2026 of capacity 63 KVA complete all as specified and directed.
1
-
-
Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm complete all as specified and directed.
50
-
-
Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 sqmm complete all as specified and directed.
2
-
-
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 70 Sqmm complete all as specified and directed.
150
-
-
All as per item No 197 above but of size 2 core 10 Sqmm complete all as specified and directed.
100
-
-
Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with automatic governor, relay panel and switch gear for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB-IV + Norms and foundation etc of capacity 58.5 KVA all as specified and directed
1
-
-
Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
1
-
-
Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete complete all as specified and directed.
2
-
-
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
4
-
-
Supply & fix Galvanized Iron safety fire bucket for Fire point complete all as specified and directed.
6
-
-
Supply & fix Fire Extingusher 10 Kg ABC powder type complete all as specified and directed.
3
-
-
Supply and fixing steel tubler swaged pole completed with cast iran base plate, finial tapper plug, bolts, nuts and screws as specified type 410 SP-22(8.5) Mtr long including necessary excavation in any type soil, returning filling and removal of extra/surplus earth, concerete bed in PCC 1:3:6 type C-2 using 40mm crushed stone aggregate upto ground level and above ground level 450x450x450mm PCC coping 1:2:4 type B-1 by using 20mm aggregate complete all as specified and directed.
2
-
-
M & L for lightening arresters expulsion type 11 KV grade complete with all fittings, transmission class, discharge capacity 65 Kilo Amps complete all as specified and as directed.
1
-
-
Supply and fix Switch air break gang operated Triple pole,outdoor type with drop out switch fuse unit on HT 11 KV 50 cycle AC suitable for current rating upto 200 amp mechanically operated, mounted on insulator( 12 Nos of epoxy insulators) and steel frame, with operating mechanism worked from ground level, with earth switch and including locking arrangement all as specified and directed.
1
-
-
M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.
2
-
-
S&F LT Panel, installing, testing and commissioning of outdoor LT panel board 415 Volts, 4 wire, 3 phase factory fabricated powder coated, cubical, weather and vermin proof outdoor kiosk type, front opening, floor mounted made out of 3.15 mm thick CRCA sheet of size suitable for mounting the its accessories with electrolyte connection of the equipment/accesories to be fixed, cable glands, lugs, mounted on steel angles supports of suitable size with grouting 4 Nos supports in PCC 1:2:4 type B1 complete with separate compartment for housing with proper arrangement for air circulation and including the following accessories all as specified and directed.
(a) Electrolytic aluminium bus bar 200 Amps in distant colour with epoxy supported insulators - 01 Job (04 Nos).
(b) MCCB 4 pole,100 Amps, 415 Volts, rupturing capacity 25 KA - 01 Nos for incoming, MCCB 4 pole, 63 Amps, 415 Volts, rupturing capacity 16 KA - 01 Nos for (Outgoing),MCB SPN 40 Amp - 02 nos, Change over switch 63 Amp - 01 Nos
(c) Volt Meter digital type 0 to 500 volts with selector switch - 01 Nos
(d) Ammeter digital type 0 to 100 Amps with CTs & selector switch - 01 Nos
(e) R,Y & B Phase indication lamp LED type ( Set of three ) - 01 set
1
-
-
M&L Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.
2160
-
-
S&F tube 'Light' grade galvanised Pipe of 50 mm dia with all fitting for cable protection, laid in trenches, fixed to wall and floor by MS shaddle & fixed with pole, 02 position by MS clamp made of 40x5 mm MS flat, complete all as specified and directed.
12
-
-
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.
12
-
-
M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth GI strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 40mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%