Military Engineer Services Tender

M&L for re-used old coarse aggregate metal obtained from Item No. 01 complete all as specified and directed.

Repair to pot holes of any depth n exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth, making good by applying a tack coat with bitumen primer @ 5 Kg per 10 Sqm putting in premixed bituminous chipping (as specified for premixed carpet and sr item no . here in before and well ramedand sealed with premixed sand seal coatwith binder 9.8Kg of binder with 0.09Cum of stone chippings 6.3mm size per Ten Sqm and again well rammed to a uniform surface depth of pot holes not exc 30mm complete all as specified and directed to a uniform surface.

Preparing surfaces of black top surfaces by brush-ing with wire brushes for removing caked mud etc, swe-eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and directed.

All as per Item No. 06 here-in-before but unsurfaced WBM.

M&L for applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm with paving bituman of grade (VG-10) complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer at 05 kg per 10 sqm with paving bituman of grade (VG-10) complete all as specified and directed.

M&L for Bituminous premixed carpet, 30mm consolidated thickness, with 0.40 cu.m. of stone chippings mixed with paving bitumen of grade VG-30 of 21.9 kg as binder, laid using mechanical paver rolled and compacted to required camber and gradient complete and rolling to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed.

M&L Premixed liquid seal coat, applying evenly binder @ 9.8 kg per 10 sqm blinding with 6.3mm size stone chippings @ 0.09 cum per 10 sqm using paving bitumen of grade VG-30 and rolled with 8 to 10 tonne power road roller for a uniform smooth surface complete all as specified and directed.

M&L for premix bitumenous macadam using paving bitumenous of grade VG - 30 not less than binder content 4% by weight of total mix laid rolled and compacted thickness upto 75mm or less to a gradient and camber complete all as specified & directed. Note :- No extra payment while made if binder content are more than 4% by weight of total mix.

M/L for luminous thermoplastic paint over old treated or new concrete /bitumrn surface including preparation of surface to be painted in 100 mm strip by mechanical means as per manufacturer's instructions.

Surface dressing in soft/ loose soil not exceeding 15 cm deep and getting out as in road side berms complete all as specified and directed.

Material and labour for approved moorum/red bajri filling 75 mm compact thickness as in berms and laid in each layers not exceeding 15 cm thick, spread, rolled and consolidated to gradient and camber required with power roller 8 to 10 tonne capacity complete all as specified and as directed.

Supply and fixing in repairs dual directional reflective cat eye of aluminium casted stud 100x100 mm having plastic ABS strip containing 31 mini retro reflective glass beads of colour white/red/yellow one side provided with zinc plated nail of 12 mm dia and length 120 mm for fixing to road by hammering cat part NoOS 785 of OSCAR or Cat part no GPL 01-02 CAT EYE AL(31 B) of Green lite complete all as specified and directed.

Supply and fixing in repairs Acrylic dual directional delinators having 100 mm dia cube corner intensity reflector(red/yellow) in strong plastic ABS body mounted over CRC steel tube 47 mm dia of 16 gauge sheet sheet support of total height 600 mm having flared/welded foot for firm grip base. Acrylic reflector and ABS body protected in a welded mesh cage all steel parts stove enemelled and baked to 120C to make all weather resistant. Vertical support tube has a plastic sheet reflector all around 100 mm with a CRC 18 gauge plate of 100x200mm welded at the vertical pipe widely embedded in plain cement concrete 1:2:4 type B-1 using 20 mm grade stone aggregate block of size 20cmx20cmx25cm includingnecessary eartyh work complete all as specified and directed by engr in charge Cat part No 11-03 delinators ST-AC RP of Greenlite or Cat part NO OS-797 of Oscar complete all as specified and directed.

Suply and fixing in repairs solar road stud having 3 LED of colour red/yellow to a side (total 6 nos) housed in a tough pressure die casted aluminium alloy of size 125X125 mm with built in stem suitable length for fixing with epoxy. LED solar cells battery and light sensor well protected inside under tough inbreakeable poly corbonate sheet roof including necesary digging or taking out old /damage items and making good complete all as specified Cat part NoOS810 of Oscar or Cat Part No GPL-03-01 Make Greenlite or equvilent in Dark eye complete all as specified and directed.

M&L Demolition of Cement concrete (Unreinforced) of any description and in any position not otherwise specifically provided for including removal of debris to a distance of execding 500m all as directed.

M&L Demolition of Cement concrete (Reinforced) of any description and in any position not otherwise specifically provided for including removal of debris to a distance of execding 500m all as directed.

M&L Demolition of brickwork or stone/boulder masonary, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings dressed stonework and precast consrete articles including removal of debris to a distance of execding 500m all as directed.

M&L for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as speciified and directed.

Taking down cement or cement plaster on brick walls or concrete surfaces etc including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed.

M&L for 15 mm thick cement plaster as in cement mortar 1:4 on brick or Concrete surface to be finished even and smooth (without Using extra cement) complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

M&L for reinforced cement contrete (1:2:4) type B1 using 20mm graded stone aggregates as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length,bent to shape, incl. Cranking, bending spirally for hooping for coloumns, hooking end and binding with ms wire not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over and upto and including 10mm dia, cut to length,bent to shape,incl. Cranking, bending spirally for hooping for coloumns,hooking end and binding with ms wire not less than 0.9mm dia as in stirrups binders & spacers complete all as specified and directed.

M&L for Moorum / red bajri and sand filling in (1:1) ratio, laid in layers n exc 15 cm thick each layer spread, levelled and rammed including watering etc complete all as specified and directed.

M&L for demolition and breaking up drain pipes 600mm dia (Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for Reinforced cement concrete pipes of 600mm dia class NP-2 laid and jointd complete with collars complete all as specified and directed.

M&L for cement concrete 75mm thick type D2 1:4:8 using 40mm graded aggregate as in sub base complete all as specified and directed.

M&L for 150mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as cement concrete floors be laid in alternate bays and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen and 3 parts sand), finished the surface fair and even complete all as specified and as directed.