Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Furnitures and Fixtures
Eprocure
Opening Date5 Oct 2024
Closing DateCancelled
Tender Amount₹ 34,63,100
Costs
EMD
₹ 69,500Document Cost
₹ 500Tender Fee
Refer Documents
Summary
752948a Furniture Work Forming Part Of Job Of Provn Of Otm Accn For Mdc Mhow
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_678218_1Tender No
752948A FURNITURE WORK FORMING PART OF JOB OF PROVN OF OTM ACCN FOR MDC MHOWTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Item No. 02 : Chair Revolving (High Back):- DIMENSION: The overall size of the chair shall approx be (W) 660mm X (D) 520 mm X (H) 1250 mm. The chair shall be procured directly from manufacturer or their authorised dealer as per their drawing as mentioned all as directed by Engr-In -Charge. Rest all as per drgs.
1
-
-
... More
Item No. 03 : Chair Writing:- DIMENSION: The overall size of the chair shall approx be 950mm high,500mmwide
DESCRIPTION: The size /dimensions of the chair shall meet the overall specification as described. The frame of the chair shall be of MS tubular frame powder coated, cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back. The Polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per Cum thick and hardness 20 +/- 2 Kg on Hamden machine. Arm rest shall be of black integral skin poly urethane with shore hardness and reinforced with MS insert. It shall be scratch and weather resistant. Both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front.
FINISH: Pre treated with epoxy powder coated oven baked with required colour as directed by Engr-in-charge/GE
FD/E6/MAP/12
80
-
-
... More
Item No. 04 : Chair Easy: - DIMENSION: Overall size shall be 510 mm long, 575mm wide and 740mm high.
DESCRIPTION: - All wood shall be first class teak (MP). Front legs shall be 30mmx55mm in section and 355mm high up to seat level. Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown on drawing FD-229
27
-
-
... More
and lower horizontal rail of back rest shall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak wood to form the frame |Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern. PVC shoes 25mmx25mm shall be provided at the bottom of all legs.
FINISH: - All wood surfaces exposed to view when placed in position shall be given Melamine polish with high glossy finish
-
-
-
... More
Item No. 05 : Chair dining: - (a) It shall be made to the shape, size and design as shown on drg & as specified in particular specification and shall be manufactured in accordance with relevant IS.
(b) Timber: All wood work shall be of kiln seasoned Ist class hard wood (Teak) throughout.
(c) Canning: Canning shall be done with 2 mm wide and 0.4mm thick plastic cane half round superior quality closely woven in Godrej pattern. Width of cane for border and strengthening band shall be 3.5mm.
5
-
-
... More
(d) Rubber Toes : Rubber Toe shall be hard and of best quality as approved by GE and shall be provided under each leg and fixed with 25mm long steel screws of suitable size. (e) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.
All wooden surfaces exposed to view (except under sides of frame and bottom of legs) shall be Melamine polish with high glossy finish FD-279
-
-
-
... More
Item No. 06 : Chair Wooden Bottom without Arms:- DIMENSION:-Overall size shall be 445mm long,440mm wide and 835mm high
DESCRIPTION:-.Timber shall be seasoned teak wood Ist Quality. Front legs shall be of size 30mmx55mm in section and 435mm high and rear legs shall be of section30x55mm and 815mm high. The legs shall be joined by front, sides, and rear rails made to shape out of 30mmx65mm in section. Two side stiffeners in short rails shall be provided of 20mmx25mm in section. One stiffener of 20mmx25mm shall also be provided at centre of both side stiffeners joining the sides stiffeners. 12mm thick decorative plywood with perforated holes 5MM dia at centre in a radius of 5 inch shall be fixed over the frame of the chair irrespective of what is shown on drg.
8
-
-
... More
All Dimensions, shape and size shall be followed as per drg. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.
FINISH:-All wooden expose surfaces shall be Melamine polish with high glossy finish FD-285
-
-
-
... More
Item No. 07 : Charpoy with Hard Top: - Overall size shall be 1980mm long, 900mm wide and 440mm high. Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg. Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level .12mm thick BWR plywood shall be provided for top as shown on drg with proper nut and bolt .one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg.PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with powder coated pre-treated finish black in colour before applying a coat of primer. Rest all as per drg
FD/MAP-II/01
10
-
-
... More
Item No. 08 : Locker Steel: - DIMENSION: Overall size shall be 760mm long, 600mm wide and 1100mm high.
DESCRIPTION: The locker shall be made of mild steel sheet 1mm thick.20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with side sockets. Two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting. One hasp and staple 75mm long shall also be fixed to shutters with riveting. The left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also. The locker shall be provided with compartments as shown in drgs made of 1mm MS sheet. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of desired colour/shade paint internally and externally (Powder coated pre treated finish & Dual tone as directed by Engr-in-charge/GE) after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visible colour as directed by Engr-In -Charge. Rest all as per drgs.
FD-1029
9
-
-
... More
Item No. 09 : Receptacle:- DIMENSION/CAPACITY:-The receptacle shall be of capacity 35 Ltrs
DESCRIPTION: The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm, provided with swivel lid and iron handles on both sides as shown in drg. FD/E6/MAP/13
4
-
-
... More
Item No. 10 : Table Dining 06 Persons (1500X900X750 mm):- DIMENSION: Overall size shall be 1500mm long, 900mm wide and 750mm high.
DESCRIPTION: All wood shall be of first class teak wood (MP).The top shall be of prelaminated MDF board of 18/19mm thick with PVC Lipping all alround as directed by Engr-in-charge/GE, the edges of the top fixed with headless nails and adhesive on long sides only . Four legs shall be 90mm×45mm in section and 750mm high. Legs shall be joined by 45mm×90mm teak wood rails in long and short sides at top in such a way that top of legs and top of rails shall be at one level.25mmX45mm teak wood wooden member of size 900mm long shall also be provided as shown in drg. Two stiffeners of 90mm×25mm in section shall be fixed equally spaced joining the long rails with dove tailed joints. Four wooden brackets /corners of size 100mmx100mmx35mm thick shall also be provided over 150mmx30mmx5mm angle iron bracket or as directed by Engr-in-charge/GE. 25mm×25mm PVC shoes shall be provided at the bottom of the table. Rest all as per drgs
1
-
-
... More
FINISH: All wood surfaces exposed to view when placed in position shall given Melamine polish with high glossy finish.
FD/MAP-II/03
-
-
-
... More
Item No. 11 : Stool Adjustable:- It shall be of tubular steel legs, steel ring welded to all legs adjustable in height from 480 to 680, 330 dia, Stainless steel seat, Mounted on unbreakable mild steel screws nut casting to be chromium plated steel mounted on conductive rubber seat stove enamelled finish to the required shade.
FD-119(M)
15
-
-
... More
Item No. 12 : Drugget 2 Mtr X 3 Mtr: - It shall be made up of heavy cotton fringes loosely woven and knitted in rectangular pieces fringed at the ends having cotton backing of standard workmanship quality. The nominal thickness of the Drugget shall not be less than 5 mm. As per sample approved by Engr-in-charge/GE.
TP
1
-
-
... More
Item No. 13 : Side rack with trey (Steel); - DIMENSION: Overall size shall be 840mm long, 355mm wide and 810mm high.
DESCRIPTION: Four mild steel angle iron 40mmx40mmx3mm shall be provided as legs and shall be 810mm high. The middle shelf shall be equally spaced between top and bottom shelves. The thickness of sheet shall be 1mm.Top shelf shall have three compartments or spaces equally spaced with 50mm high partition and back covering with mild steel sheet 1mm thick.
FINISH: All steel surfaces exposed to view when placed in position shall be given two coast of enamel paint over a coat of primer after preparation of surfaces. Painting shall be done with spray machine.
FD-1023
3
-
-
... More
Item No. 14 : Table Officers (Steel):- DIMENSION: Overall size shall be of 1680x870 x760mm.
DESCRIPTION: 25 mm MS square tube 1.6 mm thick shall be provide to frame 1 mm thick MS sheet nominal all around for drawer. Top shall be of 18mm thick pre-laminated MDF board ISI mark (exterior gde) one side decorative finish approved by GE and 2 mm thick PVC edging hot pressed all around shall be provided for top. Three drawers shall be provided on right hand sides of table. A cupboard with front openable door shall be provided on the left side of the table. A shelf shall also be provided at the middle of cupboard. All sheets for drawer’s shelf and cupboard and back covering shall be 1mm thick. Hard rubber shoes shall also be provided to the bottom of legs. Rest all as per drgs
4
-
-
... More
FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of required shade synthetic enamel paint internally and externally with spray machine after preparation of surfaces. A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine. Rest all as per drg.
FD-1003
-
-
-
... More
Item No. 15 : Drugget 4 Mtr X 3 Mtr: - It shall be made up of heavy cotton fringes loosely woven and knitted in rectangular pieces fringed at the ends having cotton backing of standard workmanship quality. The nominal thickness of the Drugget shall not be less than 5 mm. As per sample approved by Engr-in-charge/GE.
TP
1
-
-
... More
Item No. 16 : Board Notice: - DIMENSION: Overall size shall be 2440mm long 75mm deep and 1220mm high.
DESCRIPTION: 50mm x 100mm Teak wood frame with 10mm X 10 mm Thick Teak Wood edging all-round shall be provided as shown on drawing, 12mm thick soft wood board shall be fixed inside the frame over which best quality green baize cloth shall be fixed as shown on drawing. On front side all standard workmanship shall be provided in side of Teak wood frame to house 5mm thick glass shutter. Rest all as per drg. FINISH: All wooden expose surfaces shall be Melamine polish with high glossy finish Make:-Nerolac Panits/Asian Paints/Berger Paints All Dimensions shape and size shall be followed as per drg. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.
FD-99(R)
2
-
-
... More
Item No. 17 : Table centre two tier: - DIMENSION: Overall size shall be 900mm long, 450mm wide and 450mm high.
DESCRIPTION: All wood shall be of teak wood. Top of the table shall be of 12/18mm thick prelaminated MDF board exterior grade I type I I of approved shade with 2mm thick PVC beading all-round the edges of top (hot pressed) as mentioned in drawing. Legs shall be made out of 25mmx25mm MS Tube 1.6 mm thickness in section teak and 432 mm high. Top rail of 25mmx25mm MS Tube 1.6 mm thickness in section and 750mm long shall be provided between legs, width wise at 407mm above the bottom of legs. The bottom tier shall be fixed on the top of bottom side Stiffener with long steel screws. The bottom tier shall be of 12mm thick prelaminated MDF board exterior grade I type I I of approved shade with 2mm thick PVC beading all-round the edges of both the tops(hot pressed). Hard rubber shoes /PVC rings shall be fixed to the bottom of all legs.
4
-
-
... More
FINISH: All wood surfaces shall be Melamine polish with high glossy finish Make:-Nerolac Panits/Asian Paints/Berger Paints. All steel surfaces exposed to view when placed in position shall be painted with two coats of required shade with spray paint internally and externally with spray machine after preparation of surfaces. A mark of MES shall also be provided on stiffener with visible colour. Painting shall be done with spray machine. Rest all as per drg.
CWE/M/F/29/95
-
-
-
... More
Item No. 18 : Almirah glazed large steel:- DIMENSION: Overall size shall be 1985 mm high, 920 mm wide and 485 mm deep.
DESCRIPTION: The base shall be made of two numbers mild steel sheet channel base welded to bottom of Almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 920mm length and shall be up to full width of 405mm of Almirah. Top, sides, back, bottom and front of Almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making five compartments shall be provided and shall be of 1mm thick mild steel sheet. All joints and welding, fixing shall be done according standard workmanship
2
-
-
... More
HANDLE: A steel chromium plated handle 100mm long shall be provided to the shutter.
LOCKING DEVICE: The locking device shall be three way locking device and shall also be provided with decorative key plate .Make of Lock-Harrison/Godrej.
FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of desired colour/shade paint internally and externally (Powder coated pre treated finish & Dual tone as directed by Engr-in-charge/GE) after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visible colour as directed by Engr-In -Charge. Rest all as per drgs.
FD-104(M)
-
-
-
... More
Item No. 19 : Table clerk Steel: - DIMENSION: Overall size shall be 1200mm long, 610mm wide and 760mm high.
DESCRIPTION: Steel frame shall be of size 1160x570x742mm .four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm in long and short sides. Two short stiffeners of same size shall be provided at 130mm from bottom of legs. One long stiffener shall also be provided to the middle of short stiffeners. Three drawers of equal size shall be provided on the right hand side above the stiffener at 130mm high with overall size of 350mm wide and 430mm high and 410mm deep. The top of table shall be provided with pre-laminated MDF board exterior grade I type I of 18/19mm thick with teak veneer shade and 2mm thick Hard pressed PVC edging alround the table .Hard rubber/PVC toes shall be provided to the legs. Locking device shall be provided to drawers.
14
-
-
... More
FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of synthetic enamelled paint internally and externally with spray machine after preparation of surfaces. A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine. Rest all as per drg.
FD-1004
-
-
-
... More
Item No. 20 : Stool revolving with back rest/heavy base casters:- Providing and placing in position Lab stools. The seat shall be made up of 102+/-0.1 cm thick flat plywood and with moulded polyurethane foam and are upholstered with replaceable synthetic leather covers. The dimensions of seat shall be diameter 40 cm and adjustments are 360 degree revolving type. The back foam shall be designed with contoured lumbar support for extra comfort. The upholstery shall be available in synthetic leather. The dimensions of back shall be 45 cm (W) covered with polyurethane foam. The HR polyurethane foam shall be moulded with density 45+/-2 kg/m3 and hardness load 16+/-2 kgf as per IS: 7888 for 25% compression.
6
-
-
... More
The manual height adjustment shall be very easy to operate with a help of knob. It should be easily locked at the most comfortable position. The five prong pedestal shall be fabricated from 0.2+/-0.02 cm thick HR sheet (IS: DD 1079/HR), powder coated (DFT 40-60 microns) and shall be fitted with an injection moulded black polypropylene hub cap and 5 nos twin wheel castors. The pedestal shall be 55+/-0.5 cm pitch circle diameter (65+/-1 cm with castors). Circular foot ring of dia 52+/-0.2 cm shall be made of 1.9+/-0.2X0.12+/-0.0096 cm thick MS ERW tube for root support in high base stool. The twin wheel castors shall be injection moulded in black nylon. Overall dimensions shall be width-65 cm, depth-65 cm and seat height45 to 56 cm
-
-
-
... More
Item No. 21 : Table 90 X 60 X 75 cm on castors (Dressing trolley):- Overall size 902mm (L) X532mm (W) X915mm (H). Top shelf should be made of SS 304 sheet of 1 mm thick. Supporting legs made of SS 304 tube section 30.30 mm dia of 1.2 mm thick provided to support the entire structure. SS 304 tube provided at the bottom of placement of instument being used. Handle made up of SS 304 tube of dia 16 mm and thickness 1.2 mm provided to handle trolley and manuver accordingly. High endurance anti static plastic injection moulded castors of 125 mm dia. SS should be finished in glossy mirror finish. Max load capacity of 10 kg/shelf UDL.
4
-
-
... More
Item No. 22 : Screen Movable three fold (steel):- It shall be of 1650H X 2400W (Middle span 1200 wide) Tube frame with 6 ball bearing rubber castors of 50 dia provided with hooks and wire spring for curtains over baked finish. FD-83
3
-
-
... More
Item No. 23 : Bed stead iron hospital:- Bas frame approx dimension 1980 mm (L) X 820 mm(W) Overall approx dimension : 2135 mm(L) X 920 mm(W) X 600mm(H) Feature:1: Backrest, upper leg section adjustable on crank mechanism with separate screws provided at leg end with stainless steel handle. Feature 2: Calf section adjustable on ratchet mechanism. Strong and sturdy frame work made from mild steel ERW rectangular tubes. Four locations on bed frame for telescopic IV pole. “H” type legs fitted with rubber shoes. Pre-treated and epoxy powder coated finish. Supplied in knocked down condition. Bed frame made from 60 X 30 mm X 1.6 mm thick ERW tube. 18 G CRCA MS perforated sheet top for easy breathing of mattress. Patient working load-100 kg safe working load-135 kg epoxy powder coated as per ISI standards, 60 microns. SS parts finished with Matt polish. All MS parts should be In-house pre-treated in 11-tanks GREEN PRETREATMENT (ECO FRIENDLY) process and anti-microbial epoxy powder coated, 50 to 60 microns thickness.
1
-
-
... More
Item No. 24 : Receptacle:- DIMENSION/CAPACITY:-The receptacle shall be of capacity 20 Ltrs
DESCRIPTION: The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm, provided with swivel lid and iron handles on both sides as shown in drg. FD/E6/MAP/13
4
-
-
... More
Item No. 25 : Table bed side steel: - Overall dimension: 402 mm (L) X 422 mm (W) X 840 mm (H). It should have one cabinet and one drawer unit. Both provided with cam lock. There should be gap between drawer and unit to keep general items for frequent use castors are provided for easy handling. Drawer made up of CRCA sheet 1 mm thick and has ball side for easy operation. Top SS 304 sheet 0.8 mm thick castors 50 mm dia. Handle ABS powder coating of epoxy powder polyester.
1
-
-
... More
Item No. 26 : Table for Hav/Or (Steel):- DIMENSION:-Overall size shall be 900mmX600X760mm.
DESCRIPTION:-Steel frame shall be of 800mmX500mmX742mm. Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm top rails on long and short sides. Two short stiffeners joining legs in short sides of 100mm from bottom shall be provided in the middle of short stiffener joining short stiffeners with 25mm square mild steel tube of wall thickness 1.6mm at 100mm from bottom of legs. The top shall be of prelaminated MDF board of 18/19mm thick exterior grade I type I with 2 mm thick PVC edges alround the edges of the top fixed Hot pressed. PVC/hard rubber toes shall be provided to the bottom of legs.
FD-1007
5
-
-
... More
FINISH:- All steel surfaces exposed to view when placed in position shall be painted with two coats of granular enamel paint of required shade over a coat of primer with spray machine after preparation of steel surfaces.
-
-
-
... More
Item No. 27 : Rack shoe steel: - Main frame shall be of 25 mm dia MS pipe (18 Gauge). 19 mm dia MS pipe of 18 gauges (Jali frame work) shall be welded to legs. 20 mm dia MS pipe shall be welded to legs. 3 mm dia MS rod shall be provided all as mentioned in drawing. All steel members/surfaces shall be powder coated. In both elevations the dimension 175 shall be considered C/C instead of clear dimension between shelves.
FD/E6/MAP/02(R)
1
-
-
... More
Item No. 28 : Desk stand lecture: - DIMENSION: Overall size shall be 970mm wide and 1220mm high.
DESCRIPTION: Two upright of mild steel rectangular tube of 75mmx25mm of 1202mm high shall be provided in rear side and shall be 635mm apart. The two upright shall be joined with bottom, middle and top rails with 75mmx50mm mild steel tube of wall thickness 1.6mm. The two sides rails at bottom fixed at 125mm from bottom shall be 430mm long 75mmx50mm mild steel tube of wall thickness 1.6mm and shall form the part of bottom rails and join the long side of bottom rail of size 785mm long, . All edges of pre-laminated MDF board exterior grade I type I remained exposed shall be covered with teak wood edging as per the size of board edging.
1
-
-
... More
FINISH : All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces and all wooden surfaces shall be Melamine polish with high glossy finish. Rest all as per drgs
FD-1022
-
-
-
... More
Item No. 29 : Pointer long: - DIMENSION: The total length of pointer shall be 1525mm long.
DESCRIPTION: The pointer shall be made of teak wood 1st class in shape duly grinded and smoothened .The dia of pointer at top shall be 25mm and at base shall be 10mm.The base shall be fixed with 50mm long stainless steel cup made to shape as shown on drg Rest all as shown on drg.
FINISH:-All wood surfaces exposed to view when placed in position shall be painted in black with high gloss finish.
FD-1041
1
-
-
... More
Item No. 30 : Hat stand: - DIMENSION: Overall size shall be 1000 mm long, 710mm high.
DESCRIPTION: The inner frame shall be of 50mmx20mm teak wood battens six in nos .The back and front of frame shall be covered with 6mm thick teak ply. The edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. Four brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg.5.5mm thick Electro copper plated looking mirror of (saint gobian, Modiguard/Atul/Swastik) shall be provided as shown on drg with beading alround. Mild steel key plate shall be provided at both top corners of the hat stand.
1
-
-
... More
FINISH: All teak wood surfaces shall be given Melamine polish with high glossy finish. Rest all as per drgs
FD-233
-
-
-
... More
Item No. 31 : Rack adjustable 6 tier: - DIMENSION: Overall size shall be 915mm long, 610mm wide and 1905mm high.
DESCRIPTION: The entire rack shall be made of 1mm mild steel sheet. The sides shall be provided with 40x40x4mm angle iron welded to 1.00mm thick MS sheet.75x75x3mm thick Flat iron cut to shape shall be welded at front corner. All partitions shall also be made of 1mm thick mild steel sheet and shall be riveted to side of rack. All Dimensions, shape and size shall be followed as per drg. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.
7
-
-
... More
FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of enamelled paint internally and externally with spray machine of required shade as directed by Engr-in-charge/GE, after preparation of surfaces. A mark of MES shall also be provided on top left corner with visible colour. Painting shall be done with spray machine. Rest all as per drg.
FD-1038
-
-
-
... More
Item No. 32 : Table conference (8+1) seater:- Supplying and placing in position of U shape modern design conference table overall size : 3300mm(L)X 2400mm(D) X 750 mm(H) CP material : Prelaminated particle board size 600mm (L) X 600 mm(D) X 750 mm(H) (Nos -02) sp1 size: 1350mm (L) X 600 mm(D) X 750 mm(H) (Nos-04)
sp1 size: 1200mm (L) X 600 mm(D) X 750 mm(H) (Nos-01) colour Brown/black oak/finish laminated U shape modern design conference table & in between U shape table top length is @1350 mm, table top offers you a generous workspace, desk primary work surface use premium quality materials overall size is 1200 mm (L) X 600 mm(W) X 750 mm(H) table top made of 36 mm thick which give more surface area for work, machine made modular furniture made prelaminated particle board of grade II type III of IS:12823(latest) construction provision of conference table top supported with 18 mm thick pre laminated particle board modesty panel. Our work surface furniture is finished with exposed edges shall be finished with 2 mm thick edge binding tape of matching colour and shade,
1
-
-
... More
fixed with hot melt glue. Provision of single metal powder coated raceway & junction box below up for wire management through the floor to the table. Three layer prelaminated particle board (wood product) of Grade II type III of IS: 12823/latest. The seller company should be ISO:9001:2008, ISO 9001:2015 ISO 14001:2015 OHSAS 18001:2007 SEFA, Green pro Indian design mark AIOTA, FSC and SEDEX certified.
-
-
-
... More
Item No. 33 : Table Steel(1670X760X750mm): - DIMENSION:-Overall size shall be 1670mm long, 760mm wide and 750mm high.
DESCRIPTION:-Steel frame shall be of 1570mmx660mmx740mm. Four legs shall be 25mm square mild steel square mild steel tube of wall thickness 1.6mm and 730mm high. The top shall be of 1mm thick stainless steel sheet fixed through welding from beneath on 50x3mm flat iron provided at top as shown in drg. The top sheet shall be made as shape so that the width of the top shall appear to be 25mm as shown in drg.
FINISH:-All steel surfaces exposed to view when placed in position shall be painted with two coats of enamel paint over a coat of primer after preparation of steel surfaces.
FD-1012
3
-
-
... More
Item No. 34 : Table Steel (2100X900X760 mm):-All as shown on drawing. Overall size shall be 2100mm long, 900mm wide and 760mm high. Steel frame shall be of 2000mm x 800mmx759mm, Six legs shall be of 25mm square mild steel tube of wall thickness 1.6mm joined together at top with top rails in long sides with 25mm square mild steel tube of wall thickness 1.6mm. Three flat irons, equally spaced, shall be of 50mmx3mm and shall be welded to top rails as shown on drawing. Three short stiffeners at bottom at 100mm from bottom shall be provided joining legs in short sides. Long stiffener joining short stiffeners in the middle shall be provided at 100mm from bottom with 25mm square mild steel tube of wall thickness 1.6mm. Hard rubber/PVC toes shall be provided to the bottom of legs. Top of table shall have 1mm thick stainless steel sheet at top made to shape all as shown on drawing. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surfaces except on stainless steel surfaces.
FD-1013
1
-
-
... More
Item No. 35 : Table 600 X 600 mm: - DIMENSION: Overall size shall be 600mm long, 600mm wide and 760mm high. DESCRIPTION: All wood shall be teak wood. Four legs shall be of size 35mmx55mm.Top rails shall be of size 25mmx50mm.Top of the table shall be of 18mm thick pre-laminated MDF board exterior grade I type I with 2mm thick PVC edging (hot pressed) all round the top of table. Hard rubber/PVC toes shall be provided to bottom of legs. Rest all as per drg. Eight Nos of triangular brackets shall also be provided at rails and legs for extra support.
FINISH: All wooden surfaces shall Melamine polish with high glossy finish Paints.
FD-293
1
-
-
... More
Item No. 36 : Peg table:- DIMENSION; Overall size shall be 450mm long,300mm wide and 380mm high.
DESCRIPTION: Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. Two nos side rails of section 20mmx40mm of teak wood shall be provided connecting legs for extra support irrespective of what is shown on drawing. Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. Top of the table shall be of 18mm thick pre-laminated MDF board exterior grade I type I with 4mm teak wood edging all round the top of table. Eight Nos of triangular brackets shall also be provided at rails and legs for extra support.
3
-
-
... More
FINISH: All wood surfaces exposed to view when placed in position shall be Melamine polish with high glossy finish Paints Rest all as per drg.
FD-384
-
-
-
... More
Item No. 37 : Rack Magazine:- DIMENSION; Overall size shall be (L) 1200 mm X (W) 450 mm X (H) 1800 mm. Colour cherry finish laminate. Providing and supplying placing position of modular storage top shall be made from 25 mm thick pre laminated particle board. While rest of the sides as well as shelves and shutter to be made of 18 mm thick pre laminated particle board , machine processed exposed edges shall be finished with 2 mm thick edge binding tape of matching colour and shade fixed duly pasted with the assistance of edge banding machine 200 degree Celsius. Storage with construction is 5 shelves in between per shelves @ 55 mm thickness ovr all height of product is @ 1800 mm. Three layer prelaminated particles board of Grade II type III of IS: 12823/latest. The seller company should be ISO:9001:2008, ISO 9001:2015 ISO 14001:2015 OHSAS 18001:2007 SEFA, Green pro Indian design mark AIOTA, FSC and SEDEX certified.
1
-
-
... More
Item No. 38 : Teapoy: - DIMENSION: The overall size shall be 600mm long, 450mm wide and 540mm high.
DESCRIPTION: The legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood.5mmx5mm in section groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. Two nos side rails of section 20mmx50mm of teak wood shall be provided connecting legs for extra support irrespective of what is shown on drawing Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, width wise at 100mm above the bottom of legs. A centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg.25mm thick and 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. Top of table shall be of 18 mm thick pre-laminated MDF board exterior grade I type I with 2mm thick PVC edging(hot pressed) al-round the top of table.
1
-
-
... More
Eight Nos of triangular brackets shall also be provided at rails and legs for extra support.
FINISH: All wood surfaces shall be Melamine polish with high glossy finish FD-278
-
-
-
... More
Item No. 39 : Peg set of three: - DIMENSION:-Overall size of steel peg set shall be 300mm long, 30mm high and 25 mm thick.
DESCRIPTION:-The peg set shall consist of 3 steel/aluminium pegs of 7ø bent to shape fitted inside the steel/aluminium plate of 2.5mm thick with machine press/welding/riveted at spot at equidistant space .The steel/aluminium peg set shall also be fixed on wooden block of size 380mm long and 100mm wide and 15mm thick with steel screws. Two side holes shall be provided in 3mm dia for further fixing to wall.
FINISH:-The peg set shall be of stainless steel/Aluminium and the wooden block shall be Melamine polish with high glossy finish Paints.
FD-253
1
-
-
... More
SPECIAL FURNITURE
-
-
-
... More
Item No. 40 : Table office officer (2400 L x 2330 D x 770 H mm): - Supplying and placing in position of the Main table worktop made out of laminated Engineered wood and medium density fibre & modesty panels with panel upholstered with PVC material which gives the leatherette look. The office desk comes with the side runner having enough storage space. Pedestal having three drawers to store essential. Drawers have the stylish handle which enhances the look. Table colour should be in reddish cherry colour. All working or non working edges shall be provided with machine pressed.
1
-
-
... More
Item No. 41 : Vertical Filing Cabinet Size:- 1290 L x 474 W x 620 D mm: - its completely made out of CRCA Sheet 22-24g, all 4 drawers are locked from single key. Colour should be off white and brown combination.
1
-
-
... More
Item No. 42 : Side board Cupboard Size: 1960 H x 360 D x 800 w mm: - The cabinet is made from PLPB 18mmwith a 4 door construction and a lock for security on the wooden doors. The combination of wooden and glass doors ensures that all your books are stacked in accordance to your needs
1
-
-
... More
Item No. 43 : Executive chair:- Supplying, and placing in position of high back chair . Seat size 540mm (W) x 530mm (D) and back size 510mm (W) x 660mm (H), Height Min. 515mm &Max. 615m; seat and back are made up of 12-15mm thick hot pressed ply wood upholstered with leatherette in front and back, moulded with polyurethane foam. The chair shall have an adjustable centre tilting with single locking mechanism. The 5 prong (base) is made silver painted nylon vaulted bases). The telescopic bellows is 3 piece telescopic type and injection moulded in black polyurethane. The pneumatic height adjustment shall have adjustment stroke of 75mm.
1
-
-
... More
Item No. 44 : Visitor Chair: - Supplying, and placing in position of Multipurpose fixed chair as per photograph. Chair seat size 510mm (W) x 500mm (D) and chair back 510mm (H) x 510mm (W), chair seat is made up of 12mm thick hot pressed ply wood upholstered with leatherette and moulded with polyurethane foam and poly vinyl chloride back. The chair shall have lumber support. The arm rests are fitted to the seat and back with 6mm dia. and 57mm long screw made of HR steel. The under structure shall be out of tubular frame of cantilever type and of dia. 2cm x 18 BG M.S. ERW tube
3
-
-
... More
Item No. 45 : Sofa set 5 seater (3+1+1):- Supplying and placing Bloss Leatherette Sofa. Leatherette upholstery adds class to the cushioned backrest and seating. Sitting proudly on sleek PVC legs the sofa exudes a sense of comfort that is perfect for any space
1
-
-
... More
Item No. 46 : Centre Table Size: (L)1130mm X (W)630mm X (H)410mm:- Centre table made of completely solid wood with Glass top
1
-
-
... More
Item No. 47 : Side table with granite top with on wheel trolleys:- DIMENSION:-450X460X600 mm
The side table shall be procured directly from manufacturer or their authorised dealer as per their drawing as mentioned all as per specified and directed.
6
-
-
... More
Item No. 48 : On wheels chest of drawer:- DIMENSION:-1200X467X790 mm
The chest of drawer shall be procured directly from manufacturer or their authorised dealer as per their drawing as mentioned all as per specified and directed.
6
-
-
... More
Item No. 49 : Compact computer table on wheel Size:645 W x 480 D x 750 H:- computer table completely made of 18 mm PLPB with edge binding, PLPB key Board and wheels on side panels
6
-
-
... More
Item No. 50 : “L” Desk Size- 1500L x 600D x 750 H mm: - Supplying, and placing in position of Free standing table as per Model. Modular tables size 1500mm (L) x 600mm (D) x 750mm (H). Table top made up of 25mm thick pre-laminated particle board and under structure shall be made of 18mm thick prelaminated particle board gable ends and modesty panels. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one fixed Pedestal storage unit (combination of two drawers and one filing drawer), one CPU trolley and keyboard tray attached to the table top.
2
-
-
... More
Item No. 51 : Side storage Size:- 1200 H x 400 D x 810 W:- Supplying, and placing in position of Storage of size 810 mm L x 400mm D x 1200mm Ht., Storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Storage having provision of two fixed or adjustable shelves and openable doors with locking provision completely made of PLPB 18 mm with 2 selves
3
-
-
... More
Item No. 52 : Executive chair:- Breathable mesh back with cushioned fabric seat, Lumbar support, Synchro Mechanism, PP armrest , Black five star nylon base hooded casters, Seat cushion upholstered on thick water proof plywood cut foam,
2
-
-
... More
Item No. 53 : Visitor chair:- Breathable mesh back with cushioned fabric seat, Push Back mechanism, PP armrest , Black five star nylon base hooded casters, Seat cushion upholstered on thick water proof plywood cut foam,
4
-
-
... More
Item No. 54 : Desk with Dias: - The Obelisk podium made from engineered wood. The Podium houses a flat table top to keep your notes handy while allowing for wiring and a stand for your mic. The podium design is vintage with fine moulding along the edges of the frame. Using a combination of engineered wood Obelisk is a fabulous example of a podium setting to deliver speeches and lectures at halls and auditoriums.
Product Details
Material & Subtype Engineered Wood - Particle Board, Colour & Colour Family Brown - Classic Walnut, Dimension (L)550mm X (W)550mm X (H)1200mm,Finish Matte, Style Contemporary
1
-
-
... More
Item No. 55 : Oval conference table:- A:Size (L)1600mm X (D)1200mm X (H)765mm(1 NO) B: Size (L) 600mm X (D)1200mm X (H)765mm(2NOS) The chest of drawer shall be procured directly from manufacturer or their authorised dealer as per their drawing as mentioned all as per specified and directed.
1
-
-
... More
Item No. 56 : Conference main chair (W) 610 mm X (D)470 mm X (H) 1040 mm :- Breathable mesh back with cushioned fabric seat, adjustable Lumbar support, adjustable armrest with pup adding and synchro mechanism, five star chrome base hoodedcasters, seat cushion upholstered on thick water proof plywood cut foam.
2
-
-
... More
Item No. 57 : Conference officer chair (W) 625mm X (D)450mm X 920 mm : - Breathable mesh back with cushioned fabric seat, Push back mechanism, PP armrest, black water proof plywood cut foam.
8
-
-
... More
Item No. 58 : Cupboard steel (78”X36”X18” 03 shelves):- It is completely made of CRCA Sheet 20 G, with 9 lockers. Each locks should be one self & separate key and locks
2
-
-
... More
Item No. 59 : Cupboard steel(78”X36”X18” 5 shelves):- It is completely made of CRCA Sheet 20 G, with 15 lockers. Each locks should be one self & separate key and locks
3
-
-
... More
Item No. 60 : Computer table (4 seater workstation) Table Size 1200 L x 600 D x 760 H mm, Drawer Size-400 L x450 D x725H mm;- Supplying and placing in position of tile base modular Workstation ( Size -L - 1200mm W - 600mm H - 1200mm)as per photograph. Free standing partition height 1200mm and should be minimum of 80mm thick. Partition inner frame is 1.2- 1.5mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminium of 1.2-1.5mm thick. All Panels/trims shall be powder coated with 50 micron. Aluminium trims are elegantly fixed with hidden connectors on the partition. The frame work shall be fitted with 8mm thick MDF tiles of interior grade with laminate of approved shade. Partition shall have provision for pin up board with fabric/white marker/laminated of approved shade. Partition shall have 1 level raceway at skirting. The complete partitioning work shall be carried out as per approved drawing. Tabletop for workstation made up of 25mm thick pre laminated particle board of approved shade.
1
-
-
... More
The worktop shall be supported on minimum 2mm thick powder coated CRCA brackets and side panels. Side’s panels should be made from 18mm thick pre laminated particle board of approved shade.
All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one Pedestal storage unit (combination of one drawer and one shutter) , one PVC keyboard tray and CPU trolley for each seating , partition are sharing between four persons.
-
-
-
... More
Item No. 61 :Chair Medium Back Size-(W) 590mm X (D)490mm X (H)980mm:- Supplying, and placing in position of a cantilever chair seat and back are made up of Moulded foam upholstered in 14mm thick BWP grade plywood. Single piece loop PP armrest Fitted with seat and back. 57mm long screw made of HR steel. The under structure shall be out of tubular frame of cantilever type and of dia. 2cm x 18 BG M.S. ERW tube and Powder coated finish
5
-
-
... More
Item No. 62 : On wheel stools with backs: - Supplying, and placing in position of a Lab Chair. chair seat and back are made up of Moulded foam upholstered Ring for foot rest and big Hydraulic, Nylon base with castors, colour of leatherette should be in blue
3
-
-
... More
Item No. 63 : Slotted angle racks Size:72"x36"x18":- Slotted Angle Racks, it is completely made of Steel, Angle Size 40x40x2mm and 5 selves made of CRCA sheet 20 g
4
-
-
... More
Item No. 64 : Centre Table (L)1130mm X (W)630mm X (H)460mm:- It s made from premium board with a walnut finish. The different grain flitches ensure a captivating surface that commands your attention. A Walnut veneer finish with a woody texture gives it a smooth surface and muted shine
3
-
-
... More
Item No. 65 : Computer table:- (L)1200mm X (D)600mm X (H)750mm
Supplying, and placing in position of Free standing table as per drawing. Modular tables size 1200mm (L) x 600mm (D) x 750mm(H). Table top made up of 25mm thick pre-laminated particle board and under structure shall be made of 18mm thick prelaminated particle board gable ends and modesty panels. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one fixed Pedestal storage unit (combination of two drawers and one filing drawer), one CPU trolley and keyboard tray attached to the table top.
1
-
-
... More
Item No. 66 : Sofa set three seater Size-(L)1650mm X (D)750mm X (H)710mm:- The sofa is built on a solid wood frame with stylized arms. The broad base frame provides ample room for the sumptuous cushions upholstered in elegant grey fabric. The dark grey fabric coupled with the walnut finish of the wood speaks of understated style with simple design. The frame has a gentle recline for a comfortable seating position
2
-
-
... More
Item No. 67 : Peg table (Side table) (L)440mm X (W)440mm X (H)410mm:- It s made from premium board with a walnut finish. The different grain flitches ensure a captivating surface that commands your attention. A Walnut veneer finish with a woody texture gives it a smooth surface and muted shine
4
-
-
... More
Item No. 68 : Visitor chair with cushion (Set of 03 chairs):- Metal Visitor Bench
Length 1820mm x Depth 690mm x Height 790mm 1)Seat & back single section
2)Seat is 430 mm from ground
3)Perforated mild steel powder coated
4)Seat thickness 1.2 mm
5)Seat width 520 mm
6)Beam MILD steel with black powder coating thickness 1.6mm
7) Mild steel border with chrome plating for every seat & back
8) Mild steel handles chrome plated & die pressed legs at the end of chairs
9) Gross weight of regular 3-seater will be 31 kg.
3
-
-
... More
Item No. 69 : Compactor mechanical four body:- Type of Drive Mechanized Drive Type
Number of Single Faced Fixed / Static Bodies (Units / Cabinets open at one side and closed on other side covering all bays) 1
Number of Single Faced Movable Bodies (Units / Cabinet open at one side and closed on other side covering all bays) 1
Number of Movable Bodies (= A) (Double Faced / Dual Cabinets covering all bays) (Total number of available sections = 2 X number of bays X A) 1,Number of Shelves in Each Section / Cabinet 4 Shelves/5 Compartments, Load Carring Capacity of Each Shelf (Kg) 70 Kg
Delivery Condition of Movable File Storage System Knock down
Free Assembly and Installation Commissioning of knocked down supply YES
Shelves in the cabinets adjustable, Every Base frame fitted with Two pair of MS wheel, Guide rail provided with Stopper, Indexing arrangement 2 MM thick clear transparent acrylic sheet and having other dimension of 155MM/106MM,Anti rust treatment YES,
1
-
-
... More
Stud Main and add on construction S Sheet Thickness of the Cabinet Body (mm) 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest S Sheet Thickness of the Shelf Panels (mm) 0.8 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest S Sheet Thickness of the Door Panels (mm) 1.0 mm thick CRC sheet conforming to Grade D of IS 513/2008 latest, Height of base frame ±2(mm) 120mm,Height of track and moving clearance ±2(mm) 35 immaterial of Stud Rubber stud between
-
-
-
... More
Bodies, Material of base frame Hot Rolled Sheet 2MM thick confmg. to IS:1079/Latesst,Material of guide rail Consists of J-Section 2MM Thick H R Sheet and 25MM thick square bright bar both connected by screws, Material of 'C' Channel H R Sheet 2MM thick confmg. to IS: 1079/Latest, Drive covers material 1MM thick CRCA confmg. to IS:513/Latest and box type construction, Number of Folds in Shelf Panels 10,DOORS
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements