Military Engineer Services Tender

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete, masonry, brick work, incl taking out embedded portion and making good disturbed ground complete all as specified and directed.

Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc built in cement mortar including raking out joints, hacking for key, scrubbing down with water of any description complete all as specified and directed.

Dismantling of stone slabs/tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of cemnt concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.0 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain corrugated sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas and fixed with self tapping screws complete all as specified and directed.

S&F of pre-painted galvalume aluminum zinc coating GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, chajjas and fixed with self tapping screws complete all as specified and directed.

S&F of rolled mild steel work as in rafter, purlins, trusses and like (beam, tee, angle, channel or flat sections (Fe 410-W(Gde E-250 quality) including cutting, jointing etc complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel surfaces of any description, exc 10 cm girth or width over a coat of red oxide primer including preparation complete all as specified and directed.

M&L for 100mm thick cement concrete 1:3:6 type C-2 as in floors and similar work, finishing the syurfaces even and fair without using extra cement complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for Virified Ceramic tiles 8-10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors incl provision of spacers for joints & filled with epoxy etc. set to match 20 mm thick screed in CM 1:6 etc set and jointed in neat cement slurry complete all as specified and directed.

M&L for Vitrified dark shade ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces of walls including joints filled with epoxy; set and jointed over and including 10 mm thick rendering, even and rough in cement mortar 1:4 for backing of tiles, jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed.

M&L for brick work with fly ash bricks (modular size bricks), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering to brick work or concrete surface of walls in CM 1: 6, finishing the surfaces fair and even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two or more coats of textured paint of required shade, two coats applied @ 3.28 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 ltrs/10 sqm complete all as specified and directed.

M&L for complete removal of existing treatment on wall surfaces and preparation of old plastered surfaces of walls and applying two or more coats of textured paint of required shade @ 3.28 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 ltrs/10 sqm complete all as specified and directed.

M&L for applying a coat of 1.5 mm thick water proof cement based puttyon walls, finished even and smooth complete all as specified and directed.

S&F of factory made 30 mm thick flush door shutters with solid core construction with plyboard core and plywood face panels of commercial type, one face covered with decorative mica of 0.9mm thick with lipping to match complete all as specified and directed.

S&F of fcatory made 30mm thick second class hard wood glazed and skeleton door shutter, open rebated and prepared to receive glass or gauge etc; divided into squares with plain chamfered or rounded, mitred and rebated sash bars, any number, sizes of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed.

S&F of 18/19 mm thick ply boards for chowkhat, grade 2 quality, interior grade, commercial type, decorative face with 0.9mm thick mica for lipping/frame to match, fixed with screws to timber frame-work complete all as specified and directed.

S&F of window ECO 4000, of double rebate openable/fixed window made galvanized steel colour coated/powder coated (Base steel as per IS 513 D quality, galvanized as per IS 277 with zinc of 120 gM/Sqmt) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7microns thick, finish painted with a polyster paint of 12-16microns thick and back coated with Alkyd backer of 5-7microns or powder coated with pure polyester powder upto 50-60microns thick. Outer frame section 48x50mm, center mullion section 48x50mm, shutter section 47x20mm and the fixed glass beading section 12x12mm, outer frame and mullions shall consists rebate for glazed shutter with a 20mm provision for guard bars/grills and the section cut to length mitre joined with corner bracket, center mullion fixed with mullion caps, handle, stay, 2nos. SS heavy duty pivot hinges per shutter and window fitted with 5mm thick plain float glass with Ethyl Propylene Diamine Monomer (EPDM) gasket includin fixing frames in concrete/masonary wall by means of self expanding screws, including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F for powder coated aluminium sections fabricated work as in doors, windows, partition as per manufacturer instructions incl necessary jointing cleats, anodised aluminium snap beading incl taking down damaged portions of damage doors, windows complete all as specified and directed.

M&L for granite (any type) 20 mm thick stone work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, counter, shelves and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F of 100 mm long stainless steel butt hinges and fixed with SS screws ISI marked complete all as specified and directed.

S&F of 150 mm long, 10 mm dia stainless steel handles cast type and fixed with SS screws ISI marked complete all as specified and directed.

S&F of 150 mm stainless steel tower bolts, extruded section and fixed with SS screws ISI marked complete all as specified and directed.

S&F of 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed.

S&F of 300 mm long stainless steel sliding door bolt with hasp, staple (bolt type), ISI marked, fancy type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section and fixed complete all as specified and directed.

S&F of door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in floors complete all as specified and directed.

S&F of anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm as specified in SSR Part-I complete all as specified and directed.

M&L for providing and fixing Gypsum board 12mm thick in ceiling fixed with screws on frame work complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in copings, bed plates, hold fasts, filling in pressed steel frame and the like finished fair and even incl necessary form work complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection, aprons, hard standing, path and like including finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for hard core of broken stone of gauge not exceeding 63 mm, deposited, spread & levelled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

S&F of 160 mm dia PVC rain water gutter including MS clamps for fixing, end cap, center joints, drops at appropriate interval as required at site complete all as specified and directed.

S&F of 110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with MS clamps complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

Taking down wall panelling and similar work complete all as specified and directed.

M&L for providing factory made 18 mm thick 100% Solid WPC (Wood polymer Composite) Jali of required size comprising of virgin PVC resin of K Value 58-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC Jali to be fixed with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and directed. Note: MTC and authentication shall be provided by the manufacturing company.

M&L for preparation of newly plastered surfaces of walls and applying two or more coats of premium acrylic smooth exterior paint with silicone additives of required shade, two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 117725.00