Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date14 Nov 2024
Closing Date5 Dec 2024
Tender Amount₹ 49,70,000
Costs
EMD
₹ 99,400Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_683945_1Tender No
8748/GE (MIS)/MhowTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Tender documents
BOQ Items
M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.
4.8
-
-
M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified.Note:- Liquid WPC shall be measured and paid separately.
130
-
-
Supply only liquid water proofing compound.Make:- SUPER LATEX or DR. FIXIT of PIDILITE INDUSTRIES LTD and PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or equivalent make as approved by GE.
20
-
-
M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete.
(i) Cleaning of new rendered surface properly and drying the surfaces.
(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg/ Sqm.
(iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of Aluminium paint on surface.
120
-
-
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provider for.
8
-
-
Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed.
568
-
-
M&L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
90
-
-
M & L for vitrified cerameic tiles 9 to10mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:4 complete all as specified and directed.
110
-
-
M&L glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
210
-
-
M&L glazed ceramic coloured tiles size 300x200x 7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
80
-
-
M&L glazed ceramic coloured tiles size (200x200mm) x 7mm (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
78
-
-
Preparing old wall tiled surface and cleaning with suitable method and filling the joints and making the surface good and matching with existing surface incl repairing (if required) for smooth finish complete all as specified and directed by Engr-in-Charge.
210
-
-
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed
43.8
-
-
M&L Granite 18-20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE
16
-
-
M & L 22 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.
130
-
-
Description same as per item No 23 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.
12
-
-
Only cutting/grinding and polishing of existing Kota stone floor incl repairing (if required) for smooth finish complete all as specified and directed by Engr-in-Charge.
30
-
-
Machine pressed designer precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 25mm thick (compacted thickness) sand cushion complete all as specified and directed.
280
-
-
Machine pressed designer precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade laid over and including 25mm thick (compacted thickness) sand cushion complete all as specified and directed.
210
-
-
Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete.(Window/ventilators)
6
-
-
Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame )
9
-
-
Taking down Shutters of any description n exc 1sq. m each
3
-
-
Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each.
2
-
-
S&F, MS doors shutter ,door frame or gates of angle or other section conforming to Fe 290(Gde E-165) with gusset plates, rails, braces, etc complete including hanging also fastening and fixing complete as specified and directed.
210
-
-
S & F 105 x 60 mm size Pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate,hold fast include etc., complete as specified
5
-
-
M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed.
0.2
-
-
M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.
2.5
-
-
S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.
2.5
-
-
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60
(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of
elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
52
-
-
S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural
fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100
gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),
minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame
of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing
with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk
S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S
screws shall be paid separately)
16
-
-
S & F 150 mm size butt hinges, extruded Stainless steel alloy with galvanised stainless steel hinge pin, anodised and fixed, type B-21 complete .
24
-
-
S & F Stainless steel 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.
16
-
-
S & F Stainless steel 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.
8
-
-
S & F 150 mm size Stainless steel handles cast type, anodised ISI marked complete
18
-
-
S & F 300 mm Stainless steel alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
4
-
-
S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.
2
-
-
S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.
4
-
-
S & F Powder coated aluminium sliding glazed windows with two track shutter sliding (both shutters wire mesh) shall be two part as upper part shall be two movable shutter and lower part consist two shutter (one openable in bottom part and top side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc ..
(i) Windows frame of cross section 1.5mm thick. (Min)
(ii) Two way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)
(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)
(iv) 4 mm thick glass superior quality.(Min)
(v) IDPE Rubber guasket for fixing of glass.
(vi) Locking cleats per shutter -01 Nos.(Min)
(vii) Sliding rollers per shutter - 02 Nos.(Min)
(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.
(Ix) fixing screw for frame with wall per windows- 08 Nos.
8
-
-
S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.
3
-
-
Dismantling water tanks and removing to store Capacity of tank exc 500 and nexc 1000 litres.
1
-
-
S&F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 complete.
1
-
-
S&F in repair ball valve/float ball high pressure of PTMT 20mm with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed.
1
-
-
Taking up or down existing steel tubing and connection fixed in any position complete for following sizes:-
-
-
-
(a) 15 mm dia
30
-
-
(b) 20 mm dia
22
-
-
Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for the following sizes: -
-
-
-
(a) 15mm dia bore
30
-
-
(b) 20 mm dia bore
22
-
-
M&L mild steel framed work such as grills ,cover, gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.
120
-
-
M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
140
-
-
M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.
12
-
-
Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads.
2
-
-
M & L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.
5
-
-
M & L for 3 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.
1
-
-
S & F in repairs Galvnised mild steel wire cloth, 0.56mm conforming to I S nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.
1
-
-
M&L for stainless steel wire cloth, 0.71mm nominal dia of wire and average width of aperture 1.20mm and fixed with tinned tacks, or stainless steel wire staples
8
-
-
Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed
22
-
-
M&L Brick work with flyash brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed
22
-
-
M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforecemnt to remove loose rust particles and allow to dry it for 2 to 3 Hrs , insert the new reinforcement to damaged portion by drillig hole at required distance , fill the epoxy in to the hole by 2/3 of the hole and insert the reinforcement in the hole, and binding the reinforcement at rusted portion of reinforcement, apply cement slurry on entire damaged area , and plaster the surfaces with cement , sand and Polymer liquid in 1: 3 : 15% of cement by weight ) and water as required , mixing properly and plaster the surface , finished even and smooth by making the edge water dropping groves complete all as specified and directed. Note : - Cost of formwork shall be deemed to be included.
32
-
-
Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
120
-
-
M&L for rendering in cement mortar (1:4) 10mm thick first coat on fair faces of brick walls or concrete surfacesand in cm 1:4 5mm thick second coat over first coat , mixed with water proofing compound as per manufacturer instructions, finishe fair and even without using extra cement all complete as specified and as directed.
260
-
-
Supply only Integral water proofing compound
25
-
-
M&L for rendering 15mm thick plastering in CM (1:6) finished even & fair all as specified.
60
-
-
M&L for rendering 5mm thick in CM 1:3 as in soffits of ceiling and Rcc cjhaja/ Facia roof projections finished fair & even all as specified .
10
-
-
M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed.
10
-
-
M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.
60
-
-
M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparation complete all as specified and as directed.
83
-
-
M&L for preparing of old surfaces of walls and applying one coat of cement base paint all complete as specified and directed.
180
-
-
Complete removal of old treatment on internal surfaces of wall by scrapping , and washing etc all as specified.
260
-
-
M&L for applying 3 mm Avg thick wall care putty water proofing on wall on i old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed
30
-
-
M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed.
210
-
-
Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level.
3
-
-
M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement
40
-
-
S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.. Note :- Pillar tape shall be measured as supply only under respective item
1
-
-
supply only 15 mm dia bore pillar tap cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete but fency type.
1
-
-
S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.
1
-
-
Supply only10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed. Note:-Fixing only rate is included in item No above.
1
-
-
Supply only PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete.
3
-
-
S&F in repair 600mmx450mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed at site.
1
-
-
S & F (in repair) brass chromium plated stop cock/ angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete. Make : Plumber Cat No FLP-0507/Prayag Cat Part No 7810/ Jaquar Cat Part No CQT-23059 complete all as specified .
2
-
-
S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make : Plumber Cat part No U-0911/Prayag Cat Part No BA-10/Jaquar Cat Part No AQN-7711 complete all as specified and directed.
1
-
-
S & F in repair over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union Make: Plumber Cat part No.ITP-2401/Prayag BOS-90 Cat Part No SHP-524/Jaquar Cat Part No OHS 1989 complete all as specified and directed
1
-
-
S&F in repair 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed
1
-
-
S&F 15mm dia Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixedcomplete.. Make : Plumber Cat part No FLP-0203 /Prayag- PIS-08, Jaquar Cat No CON-107KN complete all as specified and directed.
2
-
-
S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)
1
-
-
S&F harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment all as specified and as directed.
10
-
-
S & F in repair corner shelf of 300 mm size with ABS brackets complete. Make : Prayag Cat No - BEA - 52 or equiilent of Jaquare CAT NO - CAN-1173/Plumber CAT NO- U-0921 complete all as directed and specified.
1
-
-
S & F in repair Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as specified.
1
-
-
S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.
1
-
-
S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.
8
-
-
S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.
6
-
-
S & F in repair 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.
2
-
-
S & F in repair 75mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.
2
-
-
S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.
1
-
-
S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.
1
-
-
S & F in repair 110 mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.
1
-
-
S & F in repair 75mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.
1
-
-
S & F in repair 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed.
1
-
-
Demolition of reinforced cement concrete of any description for manhole cover, slab of septic tank & soak well etc complete.
1
-
-
M & L providing pre-cast cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well,drain cover etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete.
1
-
-
S & F mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, benty shape required including cranking, bending, spirally for hooping for columns, hooking ends and hinding with mild stee wire (annealed) not less than 0.9 mm dia or securing with clips complete.
250
-
-
M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered or un-plastered surfaces of ceiling and applying two coats of exterior weather coat paint over one coat of primer. Make : Apex of Asian Paints or equivalent.
180
-
-
M&L for complete removal of existing treatment with Mechanical Scrubber on old plastered or un-plastered surfaces of walls and applying two coats of exterior weather coat paint over one coat of primer. Make : Apex of Asian Paints or equivalent.
1080
-
-
M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete.
3
-
-
Dismantling fillets,rails,posts,rafters,purlins,etc under 40Sqcm in section
15
-
-
Dismantling of plain or corrugated steel sheeting any gauge, thickness, including nainaital or similar pattern roof coverings.
420
-
-
Dismantling wrought iron or mildsteel work of any descripton of any description not otherwise provided for
8
-
-
M & L for cutting holes in brick walls built in cement mortar at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortar in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.
1
-
-
S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
1780
-
-
-do- but fixing only as obtained from dismantling
450
-
-
S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.
350
-
-
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensil strenght of 550Mpa as in roof covering/cladding wall/roof vally gutter , fixed with self tapping screws as specified.
70
-
-
M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed.
80
-
-
M & L Preparation of old painted wooden surfaces of any description not otherwise description over 10 CM width or grith and apply one coat of synthetic enamel complete all as directed.
18
-
-
Excavation in trenches in avg soil not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole,drain etc not exceeding 10 sqm on plan and getting out in any type of soil complete.
30
-
-
Returning, filling in Soft/Loose soil including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.
6
-
-
Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete.
24
-
-
M & L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channel and drains complete all as specified and directed.
12
-
-
S&F in repairs, vitreous china urinal, half stall type, incl providing and fixing plug, bedding urinal against wall in CM (1:2), securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, gratings and union for discharge pipe all as complete.
1
-
-
M&L for chequered cement concrete tiles (glossy finish) with grey cement and pigment of size 30cmX30cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
60
-
-
S&F Reinforced concrete pipes 300 mm internal dia , class NP3, laid and jointed complete with collars.
6
-
-
Taking down cement plaster from the channel surface, etc., including raking.
120
-
-
M&L Two coats of SikaTopseal 107 or Aqua Arm Top Guard inside of the wall of the room, a two components ready to use polymer modified cementatious coating . First Coat should be applied horizontzlly and second coat should be applied verticallyThe thickness of coating shall not be less than I .5mm. complete all as specified and directed and sprinkle sand over the coated surface.
Note: Work to be executed by the authorized applicator of manufacturer only. Complete all as specified and directed.
120
-
-
M&L for 20 mm thick plaster on fair faces of brick work or concrete surface in cm(1:4) admixed with Aqua Arm Wp-10 as recommended by the company.
120
-
-
Applying two coats Sikagard 67 or Aqu Arm Tank Coat, a water based epoxy coating certified for portable water on all over the Channel surface.Apply the first coat by brush allow it to dry for 6-8 hrs and then apply 2nd coat and allow it to cure complete 24 hrs The coating shall be applied using brush application. The Thickness after two coating should not be less than 500 microns complete all as specified and directed. 195.00 Sqm
120
-
-
M&L Fibre glass reinforced transparent plain/corrugated sheet 2 mm thick with t with coach screw and washer in roof, wall or fixed with L type ofr J type screws with MS Frame.
24
-
-
S&F for gusset plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk foring holes,) including hinges and necessary attachment confirming to Fe-290 (Gde E-165) for RCC water channel cover.
340
-
-
M&L for anodised aluminium frame/shutters for doors, windows ventilators with one or more rebates including joining cleat for fixing and suitable handle etc. complete all as specified.
26
-
-
M&L cement concrete (1:4:8) type D-2 using 40mm graded agg as in Foundations filling and mass concrete all as specified and directed.
6
-
-
M&L for Cement concrete Type B2 1:2:4 (40 mm graded aggregate) in surface channels and drains.
1.8
-
-
M&L for Cement concrete type B1 1:2:4 (20mm graded aggregate) as in coping
1
-
-
Demolition of brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.
Note : All demolished items shall be removed from Defence land as per dirns of Engr-in Charge.
2
-
-
M & L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM 1:6 complete as directed and specified..
2
-
-
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4
1
-
-
Taking down cement plaster on brick wall /ceiling built in cement mortar including raking out joints , hacking for key scrubbing down with water etc. complete all as specified and directed.
45
-
-
M & L for rendering 15 mm thick in cement mortar (1:6) on faces of brick work and finished the surface fair and even without using extra cement complete as specified and directed
20
-
-
M&L for rendering 15 mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with WPC @ 3% by weight of cement or as per manufacturer instruction, finished fair and even without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for seprately as supply only under respective item as specified and directed.
20
-
-
Supply only liquid water proofing isi marked(used 200ml per bag of cement) complete all as specified and directed
0.74
-
-
M & L for rendering 10mm thick in cement mortar (1:3) as in ceiling on fair faces of brick work and finished the surface fair and even without using extra cement complete as specified and directed
5
-
-
M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed.
5
-
-
M&L for applying 1mm thick wall care putty on wall on internal old/new wall surfaces as per manufacture's instruction complete all as specified and as directed
20
-
-
M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. Note: Putty shall be paid seperately
50
-
-
M&L for preparation of surface and applying two coat of acrylic emulsion with roller on new treated surfaces of wall etc complete all as specified and directed.
20
-
-
M&L for preparation of surface and applying two coat of acrylic emulsion with roller on old treated surfaces of wall etc complete all as specified and directed.
50
-
-
Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed. Note : All demolished/dismantled items shall be removed from Defence land as per dirns of Engr-in Charge.
105
-
-
M & L first or premium quality joint free vitrified cerameic tiles of any colour 9 to10mm thick light shade (square/ rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed.
50
-
-
M & L for vitrified cerameic tiles 9 to10mm thick light shade (square/ rectangular ) polished, area of each tiles not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.
5
-
-
M&L non skid/mat finish ceramic colour tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm (Colour and design of tiles as approved by GE), in floors etc, and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
5
-
-
M&L glazed ceramic coloured tiles size 300mm x 450 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
50
-
-
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. Note : All demolished/dismantled item shall be removed from Defence land as per dirns of Engr-in Charge.
0.1
-
-
M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE
1
-
-
Rounding to edges of stone slabs such as granite,kota stone etc one edge such as steps cooking platform and other similar situations complete all as specified and as directed.
1
-
-
M&L for cutting and mirror polishing of existing kota stone flooring
100
-
-
Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete.
1
-
-
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete. Make : “SYNTEX/RAJSHREE Plastic wood Forex, Indore”.
5
-
-
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded single side prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of single side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge. Make : “SYNTEX/RAJSHREE Plastic wood Forex, Indore”.
1.2
-
-
S & F aluminium anodised barrel tower bolts of extruded section 100 mm long
2
-
-
S & F aluminum anodised alloy handle 100 mm cast type
2
-
-
Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame )
1
-
-
Taking down door shutter from frame exc 1 Sqm but not exc 2 Sqm each and refixing the shutter in the same opening after easing and adjusting.
1
-
-
M&L cutting holes in brick/block walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required exc half brick n.exc one brick complete as specified.
6
-
-
S & F mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etc all as specified and directed.
1
-
-
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door Chowkats of size 65 x 125 mm double rebate of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strenght of 2200 N (Face) & 1100 N (Edge) , minimum compressive strenght of 58 N/mm sqr , modules of elasticity 900 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners of required dia and lenght complete as per direction of Engineer-in-Charge . (MS hold fast/lugs or SS dash fasteners etc .Make : ECOCELL ( Product of Kumar Arch Tech Pvt Ltd), Floresta, of equivalent
5
-
-
S & F Factory made single extruded WPC (Wood Polymer Composite) solid DECORATIVE TYPE FLUSH DOOR SHUTTER of size 30 mm thick comprising of virgin PVC polymer of K value 58-60(Suspnsion Grade), calcium carbonate and natural fibres (wood powder/ricehusk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 650 kg/cum , screw withdrawal strenght of 1800 N (Face) & 900 N (Edge) , minimum compressive strenght of 50 N/mm sqr , modules of elasticity 850 N/mm sqr and resistance to spread of flame of Class A category with property of being termite /borer proof , water /mositure prooof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per the direction of Engr-in-Charge . (Note stainless steel butt hinges and necessary scews shall be paid seperately .Make : ECOCELL ( Product of Kumar Arch Tech Pvt Ltd), Floresta, of equivalent
1.8
-
-
S & F stainless steel butt hinges 100 mm long all as spd.
6
-
-
S & F 200 mm long brass barrel tower bolts ISI marked of extruded section and fixed complete.
2
-
-
S & F 150 mm size brass handles cast type, anodised ISI marked complete
2
-
-
S&F Aluminium (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and directed
1
-
-
S&F Smart Door Lock of size 34.40x2.40x16.90 cemtimeter (LxWxH) made up of Aluminium alloy body duly premimum mirror finished , fixed with minimum five numbers of stainless Steel bolts with five way unlocking system with minimum fifty numbers of Finger print, Pincode, two RFID Acess Card, Bluetooth Mobile App, Mechanical Emergency Key & OTP Acess, low battery alert ,04 x rechargeable battery with 8AA baterries one years warranty all as sample approved by GE. Make : Qubo/Godrej or Equivalent
1
-
-
S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.
(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)
(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)
(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)
(iv) 4 mm thick glass superior quality.(Min)
(v) IDPE Rubber guasket for fixing of glass.
(vi) Locking cleats per shutter -01 Nos.(Min)
(vii) Sliding rollers per shutter - 02 Nos.(Min)
(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.
(Ix) fixing screw for frame with wall per windows- 08 Nos.
12
-
-
S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.
0.6
-
-
M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.
20
-
-
S&F 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade.
2
-
-
S&F 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process.
2
-
-
S & F Continuous (piano) hinges,30 mm Width of flaps (when open) in mm brass, bright finish or electrogalvanised Continuous (piano) hinges, bright finish or electrogalvanised
10
-
-
S & F modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with and including side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete as specified and dirceted.
4
-
-
All as per item no 45 as above but basket size 0.50 m x 0.53 m x 0.15 m complete as specified and dirceted.
4
-
-
All as per item no 45 as above but basket size 0.50 m x 0.53 m x 0.21 m complete as specified and dirceted.
4
-
-
S&F 100mm size MS mat/glossy finish handle complete as specified and directed.
4
-
-
S&F stainless steel self closing hinge of 75mm size for PVC door shutter complete as specified and directed.
4
-
-
S&F 50x15mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.
4
-
-
S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.
2
-
-
Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads.
1
-
-
M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.
0.5
-
-
M & L for 3 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.
0.5
-
-
Taking down 15mm dia existing steel tubing and connection complete.
10
-
-
Taking down 20mm dia existing steel tubing and connection complete.
10
-
-
S & F 15mm dia GI Pipe incl jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete.
10
-
-
S & F 20mm dia GI Pipe incl jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete.
10
-
-
Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in Stone/ brick walls all as spd.
10
-
-
S&F stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and directed by Engr-in-Charge. Note : size of plate rack should not be less than 900x 900mm and weight of rack shall not be less than 6.25 kg each.
1
-
-
S&F in repair 15 mm dia stop/angle cock, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed
2
-
-
S&F in repair 15 mm dia consealed type stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed.
2
-
-
S&F 15mm dia Bib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixedcomplete. Make : Plumber Cat part No FLP-0203 /Prayag- PIS-08, Jaquar Cat No CON-107KN complete all as specified and directed.
1
-
-
S & F( in repair) 15 mm bore bib taps long body, with wall flnge chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.. Make : Plumber Cat part No EC-0209/Pearl Cat Part No BELL-455/ Jaquar Cat Part No FLR-5041N complete all as specified and directed.
1
-
-
S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed. Make :- Nirali , Diamond ,Jain Brothers Sanitation Pvt Ltd
1
-
-
S & F in repars Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.
1
-
-
S & F in repair sink mixer with swinging/rotatable spout with connecting legs & wall flanges complete all as specified and directed. Make : Plumber, Prayag or equivalent
1
-
-
S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.
Note : Pillar tap shall be measured as supply only under respective item
1
-
-
Supply only 15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
Make : Plumber Cat part No AZT-3104/Prayag : Cat part CAT NO-8750/ Jaquar Cat Part No FLR-5167NB
1
-
-
S&F in repair CP bottle trap 32mm bore for wash basin with inlet and outlet screwed for connection including necessary packing union and cup and fixed.
1
-
-
S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.
1
-
-
S&F in repair Vitreous chaina wash down wall hung water closet pan Make Jaquar Cat part No CNSWHT-363SPPZ with PVC slim Cistern including soft closing seat cover and all necessary fitting/fixtures connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. Make :- Jaquar/ Hindware/Kohler
1
-
-
Supply only PVC connection pipe 15 mm dia 600 long with PTMT nut at both ends complete.
2
-
-
S & F in repair brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified. Make : Plumber Cat No FLP-0507/Prayag Cat Part No 7810/ Jaquar Cat Part No CQT-23059
1
-
-
S&F in repair soap dish (ovel) type Stainless Steel chromium plated of size not less than 50mm dia complete. Make : Jaquar/Marc/Plumber
1
-
-
S & F in repairs 1200 x900x6mm size beveled edge mirror of selected quality glass fixed with chromium plated brass screws and cup washers all as specified and directed
1
-
-
S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed. Make : Plumber Cat part No U-0911/Prayag Cat Part No BA-10/Jaquar Cat Part No AQN-7711
1
-
-
S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.Make :prayag
1
-
-
S & F in repairs fancy type CP two way bib cock of 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.Make: prayag
1
-
-
S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for15 mm GI bore pipe complete all as specifed and directed. Make :Jaquar/Marc/Plumber
1
-
-
S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE)
1
-
-
S & F in repair PVC bath cabinet box mirror type with shutter complete. Make : Prayag Cat No -551 or equilent of plumber/ESS/jaquar etc.
1
-
-
S & F in repair corner shelf of 300 mm size with ABS brackets complete all as directed and specified. Make : Prayag Cat No - BEA - 52 or equiilent of Jaquare CAT NO - CAN-1173/Plumber CAT NO- U-0921
2
-
-
S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass, shelf 120mm wide with CP bracket guard and railing 600mm long. Make : Plumber/Prayag
1
-
-
S & F in repair CP Tumbler Holder, complete all as specified and directed by Engineer-incharge. MAKE:- Plumber Cat Part No. U-0914/ Prayag Cat Part No BA-16/ Jaquar cat Part No-AQN-7741
1
-
-
S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed. (Make : Plumber Cat No IT - 1904 ITALIAN / Prayag Cat Part No- BEA-87 /Jaquar CAT PART NO - ALD-CHR-583)
1
-
-
S & F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge.
Make : Plumber Cat Part No. U-0916 /Jaquar Cat Part No AHS1551 /OR Prayag Cat No- BA-88 EQUILENT
1
-
-
S & F in repair Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as specified.
1
-
-
S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.
1
-
-
M&L in repair PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement
1
-
-
S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.
2
-
-
S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches complete all as specified and directed.
3
-
-
S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.
3
-
-
S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.
2
-
-
S & F in repair 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.
2
-
-
S & F in repair 75mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.
2
-
-
S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.
2
-
-
S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.
2
-
-
S & F in repair 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed.
2
-
-
S&F 100mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof
4
-
-
S&F 75mm stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof
4
-
-
Taking down old curtain rods of any description and S&F in repairs 25 mm dia stainless steel curtain rod as approved by GE complete all as spd and directed.
20
-
-
S&F in repairs 25 mm dia S/S decorative brackets with arrangements as approved by GE complete all as spd and directed.
8
-
-
S&F Gypsum Board 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre on GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre inluding finishing the joint of face board with specially formulatted jointing compound and 48 mm wide fibre tape to provide seamless finish Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.
25
-
-
S&F PVC prelam sheet wall paneling of thickness 5mm consisting of panels having size 1.22 M x 2.44 M stuck on inner frame work of 50 mm wide strips of 5mm thick prelam PVC sheet of 600 Kg/cbm density manufactured by an ISO-9000 certified company. The strips should have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fix the strip to the wall vertically at an equal interval of 10” between two PVC strip. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fastners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joints of two panel for aesthetic looks. The exact size of the panel and correspondingly of grid may vary depending on the size of wall. Optionally a strip of 5mm thick PVC sheet of width 75mm feathered at edges shall be struck at the places where two panels are jointed, using solvent complete all as specified and as directed
66
-
-
M & L preparation of old wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.
15
-
-
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
231.32
-
-
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.
11
-
-
Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.
100
-
-
Material & labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.
40
-
-
M&L for Hard core of guage N.Exc 63mm,deposited,spread and levelled in layers N.Exc 15ccm thick,watered and rammed to a true surface all as specified and directed.
4.5
-
-
Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and base of floor complete all as specified and directed.
20.19
-
-
Material & labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) complete all as specified and directed.
6.2
-
-
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with cement mortar (1:4) finished even & smooth.all as specified and directed.
54
-
-
S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 as in frame work for sun shade, roof projection and vertical section etc. complete all as specified and directed.
1800
-
-
S&F Pre-painted Galvalume/ Zinkalume corrugated sheeting 0.50 mm thickness as in roof, etc, having crest depth 28-30mm at a pitch of 195-250 mm and having 2 ribs in between for addition strength fixed with zink coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap complete as directed and specified.
190
-
-
S&F for 2mm thick plain transparent polycarbanate roofing sheet as in roof covering /cladding to wall fixed with screws all as specified and directed
65.2
-
-
Material & labour Machine cut Kota stone slab flooring 20 mm thick (+ 2mm) thick of with 58cm x 58cm in size (or nearest size as available in the market) laid over and including 25 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate and 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, incl rubbing and polishing to mirror finish, complete all as specified and directed
150
-
-
M&L 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection all as specified and directed.
76
-
-
M & L for Form work to sides of foundation / base of columns plinth beams and similar work with fair finished surface complete all as directed.
12.04
-
-
M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
1.41
-
-
M & L for Form work to sides of columns and similar work with fair finished surface complete all as directed.
7.04
-
-
M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.
0.35
-
-
M & L for Form work to sides of beams and soffit with fair finished surface complete all as directed.
20
-
-
M & L for RCC M-20 (Design Mix) using 20mm graded stone aggregate as in beams,cantilivers,brussemmers,lintels over 1.50m span complete all as specified and directed.
1.5
-
-
M & L for TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
250
-
-
Ditto, but 6mm to 10mm dia stirrups complete all as specified and directed.
60
-
-
Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc.
165
-
-
Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.
14
-
-
Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
720
-
-
Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.
15
-
-
M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including modular sunken anodised steel box for housing modular switch socket , regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for One light point controlled by one, one way switch 5 Amps
-
-
-
(a) One light /fan //bell /Exhaust point controlled by one, one way switch 5 Amps
105
-
-
(b) One light point controlled by one, two way switch 5 Amps
5
-
-
(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on Same board.
14
-
-
(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on Independent board.
26
-
-
Description all as per item No 4 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
19
-
-
Description all as per item No 7 here in before but using 4.0 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for geyser point/AC point connecting to metal plug and socket DB incl necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.
1
-
-
S & F for Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified.
147
-
-
S & F for Modular Switch , single pole, two way, and 5/6 Amp single module complete all as specified.
6
-
-
S & F for Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified.
16
-
-
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified.
40
-
-
S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified.
19
-
-
S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.
12
-
-
S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified
104
-
-
S&F in repairs LED ceiling light fittings 34/36 watt Surface mounting type 2x2 luminaire, 6000k complete with driver duly connection wire etc including taking down the existing. Make Jaguar Cat No. LSVR01S036XC, Crompton Cat No. LCTLRN-36-FO-CDL, Bajaj Cat Pt No. BZRSQL 36W GZ1 WH or equivalent in Havells Wipro.
14
-
-
Supply and fix in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or equivalent in Wipro
43
-
-
S & F for Decorative ultra slim LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Cat No LHEXACP7IN1W010 of Havells/equivalent make in / Wipro/Philips.
9
-
-
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Cat No ENXT P 36L WH CR PC SD of Bajaj or equivalent make in Philips, Wipro/Havells
10
-
-
S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for LED flood light fitting luminaire with high power LEDs as light source and electronic driver of capacity 120 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge.
8
-
-
M & L sub main wiring with 02 runs of 2.5 sqmm main wire along with 01 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed.
NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.
Make of cable - Havells / Finolex / RR Kabel Ltd. / L&T
Make of PVC Conduit( FRLS) - Presto Plast / Finolex / Jindal / Asian / AKG
250
-
-
M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25/32 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge.- Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit
215
-
-
M&L for Sub main wiring in repairs with Four runs of single core FR LSH PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 32 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable (Two runs of 6 Sq mm for earth wire) connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Note: Four Run of Single Core FRLSH ( 6Sq mm) Cable and two runs for same size as earth wire(6 Sq mm).
100
-
-
Supply and Fix in repairs flush mounting factory made Vertical TPN DB, IP-43 Protection -IK 08, with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for TP/FP 100-125 amps G Frame MCCB as incomer and SP/TP MCBs as out going 4 way complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
1
-
-
Supply and fix in repairs double door TPN DBs 04 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
2
-
-
Supply and fix in repairs double door SPN DBs 08 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
9
-
-
Supply and fix in repairs double door SPN DBs 04 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
2
-
-
S & F in repairs MCCB FP 125 Amps 25 KA including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
1
-
-
S & F in repairs MCB TP 25 to 63 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
2
-
-
S & F in repairs MCB TPN 40 to 100 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
7
-
-
S & F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.
4
-
-
S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.
36
-
-
S & F for energy efficient exhaust fan of metal body 450 mm sweep Heavy Duty Ventil Air -DSP green type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall or fixing in aluminium fabricated windows including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).
6
-
-
Labour only for refixing the celing fan/ Exhaust fan obtained from item No 5 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.
12
-
-
Earthing complete with galvanisedsteel earth plate electrode60×60cm.× 6mm thick, buried directly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate otless'than 1.5 metres below normalground level, connected togalvanised earth lead wire 4.0mmdia by means of bolts, nuts, checknuts and washers of galvanised ironor steel all as shown in electricalplate No. 3 connected to earthing testpoint all as specified or indicated including testing on completion.
Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.
3
-
-
S&F in repairs LED ceiling light fittings 34/36 watt recess mounting type 2x2 luminaire, 6000k complete with driver duly connection wire etc including taking down the existing. Make Jaguar Cat No. LSVR01S036XC, Crompton Cat No. LCTLRN-36-FO-CDL, Bajaj Cat Pt No. BZRSQL 36W GZ1 WH or equivalent in Havells Wipro.
4
-
-
Supply and fix in repairs double door TPN DBs 08 way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge. Make - HPL/L&T/Havells
1
-
-
S & F for metal clad box suitable for 230 volt 50 Hz for AC connection three pin and socket with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%