Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date25 Jun 2024
Closing Date12 Sep 2024
Tender Amount₹ 1,00,00,000
Costs
EMD
₹ 1,75,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_662010_1Bid Award Id
ViewTender No
82674/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Taking up ductile/ cast iron water mains (including all fittings) dia of 200 mm, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified & directed.
6
-
-
Taking up ductile/ cast iron water mains (including all fittings) dia of 150 mm, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified & directed.
78
-
-
Taking up ductile/ cast iron water mains (including all fittings) dia of 100 mm, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified & directed.
108
-
-
Taking up ductile/ cast iron water mains (including all fittings) dia of 80 mm, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified & directed.
262
-
-
Cutting cast iron pipes of size 200 mm and reducing to required length before laying in position for insertion of new tees, branches, etc. complete all as specified & directed.
4
-
-
Cutting cast iron pipes of size 150 mm and reducing to required length before laying in position for insertion of new tees, branches, etc. complete all as specified & directed.
30
-
-
Cutting cast iron pipes of size 100 mm and reducing to required length before laying in position for insertion of new tees, branches, etc. complete all as specified & directed.
27
-
-
Cutting cast iron pipes of size 80 mm and reducing to required length before laying in position for insertion of new tees, branches, etc. complete all as specified & directed.
27
-
-
M&L for Cutting existing steel tubing of 40/50 mm pipe for alteration or additions complete all as specified & directed.
20
-
-
M&L for Cutting existing steel tubing of 25 mm pipe for alteration or additions complete all as specified & directed.
50
-
-
M&L for Cutting existing steel tubing of 20 mm pipe for alteration or additions complete all as specified & directed.
50
-
-
M&L for Cutting existing steel tubing of 15 mm pipe for alteration or additions complete all as specified & directed.
50
-
-
M&L for run lead joint for 200 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
4
-
-
M&L for run lead joint for 150 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
40
-
-
M&L for run lead joint for 100 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
40
-
-
M&L for run lead joint for 80 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
30
-
-
M&L for Rubber gasket joint for 200 mm dia size of pipe complete for flanged end pipe and fittings complete all as specified & directed.
5
-
-
M&L for Rubber gasket joint for 150 mm dia size of pipe complete for flanged end pipe and fittings complete all as specified & directed.
40
-
-
M&L for Rubber gasket joint for 100 mm dia size of pipe complete for flanged end pipe and fittings complete all as specified & directed.
40
-
-
M&L for Rubber gasket joint for 80 mm dia size of pipe complete for flanged end pipe and fittings complete all as specified & directed.
50
-
-
M&L for Lead wool joint for 200 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
4
-
-
M&L for Lead wool joint for 150 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
30
-
-
M&L for Lead wool joint for 100 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
25
-
-
M&L for Lead wool joint for 80 mm dia size of pipe complete for water mains with spigot and socket pipes and fittings complete all as specified & directed.
25
-
-
S&F of spigot/flanged/socketed CI fitting of 150 mm dia of bore such as bends (any type radius and angle ), tapers, tees, collars & tail piece etc complete all as specified & directed.
300
-
-
S&F of spigot/flanged/socketed CI fitting of 200 to 300 mm dia of bore such as bends (any type radius and angle ), tapers, tees, collars & tail piece etc complete all as specified & directed.
50
-
-
Taking up or down old unserviceable 50 mm bore steel tubing and connections including cleaning & refixing or removal from site complete all as specified and as directed.
Note:- Excavation and earth work wherever required shall be measured and paid for separately under respective items of BOQ.
650
-
-
Taking up or down old unserviceable 40 mm bore steel tubing and connections including cleaning & refixing or removal from site complete all as specified and as directed.
Note:- Excavation and earth work wherever required shall be measured and paid for separately under respective items of BOQ.
500
-
-
Taking up or down old unserviceable 25 mm bore steel tubing and connections including cleaning & refixing or removal from site complete all as specified and as directed.
Note:- Excavation and earth work wherever required shall be measured and paid for separately under respective items of BOQ.
650
-
-
Taking up or down old unserviceable 20 mm bore steel tubing and connections including cleaning & refixing or removal from site complete all as specified and as directed.
Note:- Excavation and earth work wherever required shall be measured and paid for separately under respective items of BOQ.
650
-
-
Taking up or down old unserviceable 15 mm bore steel tubing and connections including cleaning & refixing or removal from site complete all as specified and as directed.
Note:- Excavation and earth work wherever required shall be measured and paid for separately under respective items of BOQ.
450
-
-
Supply & fix 80 mm bore medium grade galvanised steel tubes with socket joint together and including all fittings ( Such as bend, elbow, tees, short piece connector, caps ,pluf and union etc.) and fixed complete to laid in trenches complete all as specified & directed.
250
-
-
Supply & fix 50 mm bore medium grade galvanised steel tubes with socket joint together and including all fittings ( Such as bend, elbow, tees, short piece connector, caps ,pluf and union etc.) and fixed complete to laid in trenches complete all as specified & directed.
550
-
-
Supply & fix 40 mm bore medium grade galvanised steel tubes with socket joint together and including all fittings ( Such as bend, elbow, tees, short piece connector, caps ,pluf and union etc.) and fixed complete to laid in trenches complete all as specified & directed.
500
-
-
Supply & fix 25 mm bore medium grade galvanised steel tubes with socket joint together and including all fittings ( Such as bend, elbow, tees, short piece connector, caps ,pluf and union etc.) and fixed complete to laid in trenches complete all as specified & directed.
450
-
-
Supply & fix 20 mm bore medium grade galvanised steel tubes with socket joint together and including all fittings ( Such as bend, elbow, tees, short piece connector, caps ,pluf and union etc.) and fixed complete to laid in trenches complete all as specified & directed.
450
-
-
Supply & fix 15 mm bore medium grade galvanised steel tubes with socket joint together and including all fittings ( Such as bend, elbow, tees, short piece connector, caps ,pluf and union etc.) and fixed complete to laid in trenches complete all as specified & directed.
350
-
-
Refixing old steel water tubing 15 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.
Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.
150
-
-
Refixing old steel water tubing 20 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.
Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.
350
-
-
Refixing old steel water tubing 25 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.
Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.
350
-
-
Refixing old steel water tubing 40/50 mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.
Note: Old GI pipe obtained from taking up or down here-in-before shall be re-used after necessary cleaning.
150
-
-
Supply and laying of 100mm bore DI pipes of make as approved by GE with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, ISI Marked, in any length coforming to IS: 8329 (2000) as per latest amendments, laid in trenches with & including EPDM rubber gasket (Tyton joint) and testing on completion complete all as specified and directed.
Note:- Excavation and earth work shall be measured and paid separately under respective items of BOQ.
78
-
-
Supply and laying of 150mm bore DI pipes of make as approved by GE with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, ISI Marked, in any length coforming to IS: 8329 (2000) as per latest amendments, laid in trenches with & including EPDM rubber gasket (Tyton joint) and testing on completion complete all as specified and directed.
Note:- Excavation and earth work shall be measured and paid separately under respective items of BOQ.
108
-
-
Supply and laying of 200mm bore DI pipes of make as approved by GE with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, ISI Marked, in any length coforming to IS: 8329 (2000) as per latest amendments, laid in trenches with & including EPDM rubber gasket (Tyton joint) and testing on completion complete all as specified and directed.
Note:- Excavation and earth work shall be measured and paid separately under respective items of BOQ.
6
-
-
Supply & fix 80mm bore heavy grade galvanised steel water tubes with all fittings such as bends, elbows, tees, short pieces, union etc and laid in trenches complete all as specified & directed.
Note:- Excavation and earth work shall be measured and paid separately under respective items of BOQ.
12
-
-
Taking down unserviceable sluice valve of size 80 to 200 mm dia complete all as specified & directed.
80
-
-
Supply and fixing of cast iron sluice valve 80 mm bore, class PN-1.6 of make as approved by GE, conforming to IS-14846, both end flanged with stainless steel spindle, GM nut & CI wheel including making flanged joints with & including minimum 3mm thick rubber sheet, nuts & bolts etc of suitable size complete all as specified and directed.
16
-
-
Supply and fixing of cast iron sluice valve 100 mm bore, class PN-1.6 of make as approved by GE, conforming to IS-14846, both end flanged with stainless steel spindle, GM nut & CI wheel including making flanged joints with & including minimum 3mm thick rubber sheet, nuts & bolts etc of suitable size complete all as specified and directed.
10
-
-
Supply and fixing of cast iron sluice valve 150 mm bore, class PN-1.6 of make as approved by GE, conforming to IS-14846, both end flanged with stainless steel spindle, GM nut & CI wheel including making flanged joints with & including minimum 3mm thick rubber sheet, nuts & bolts etc of suitable size complete all as specified and directed.
20
-
-
Supply and fixing of cast iron sluice valve 200 mm bore, class PN-1.6 of make as approved by GE, conforming to IS-14846, both end flanged with stainless steel spindle, GM nut & CI wheel including making flanged joints with & including minimum 3mm thick rubber sheet, nuts & bolts etc of suitable size complete all as specified and directed.
2
-
-
Repacking stuffing box of sluice valve spindle including taking apart and reassembling of size 200 mm dia complete all as specified & directed.
4
-
-
Repacking stuffing box of sluice valve spindle including taking apart and reassembling of size 150 mm dia complete all as specified & directed.
20
-
-
Repacking stuffing box of sluice valve spindle including taking apart and reassembling of size 100 mm dia complete all as specified & directed.
24
-
-
Repacking stuffing box of sluice valve spindle including taking apart and reassembling of size 80 mm dia complete all as specified & directed.
28
-
-
Supply and fixing of non return sluice valve 80 mm bore of make as approved by GE, drilled type with stainless steel spindle, including nuts & bolts etc and jointing material, ISI marked complete all as specified and directed.
6
-
-
Supply and fixing of non return sluice valve 100 mm bore of make as approved by GE, drilled type with stainless steel spindle, including nuts & bolts etc and jointing material, ISI marked complete all as specified and directed.
6
-
-
Supply and fixing of non return sluice valve 150 mm bore of make as approved by GE, drilled type with stainless steel spindle, including nuts & bolts etc and jointing material, ISI marked complete all as specified and directed.
6
-
-
Supply and fixing of non return sluice valve 200 mm bore of make as approved by GE, drilled type with stainless steel spindle, including nuts & bolts etc and jointing material, ISI marked complete all as specified and directed.
2
-
-
Taking out sluice valves of 80 mm size including refacing, regrinding and refixing complete all as specified & directed.
20
-
-
Taking out sluice valves of 100 mm size including refacing, regrinding and refixing complete all as specified & directed.
20
-
-
Taking out sluice valves of 150 mm size including refacing, regrinding and refixing complete all as specified & directed.
20
-
-
Taking out sluice valves of 200 mm size including refacing, regrinding and refixing complete all as specified & directed.
10
-
-
Supply & fix in replacement for, 50 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
40
-
-
Supply & fix in replacement for, 40 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
20
-
-
Supply & fix in replacement for, 25 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
60
-
-
Supply & fix in replacement for, 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
60
-
-
Supply & fix in replacement for, 15 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
10
-
-
Supplying and fixing in replacement of CI foot valve, flanged end and drilled of size 150 mm dia ISI marked complete all as specified and directed.
2
-
-
Supplying and fixing in replacement of CI foot valve, flanged end and drilled of size 100 mm dia ISI marked complete all as specified and directed.
4
-
-
Supplying and fixing in replacement of metalic foot valve, flanged end and drilled of size 80 mm dia ISI marked complete all as specified and directed.
4
-
-
M&L for cutting of road, hard standing made of concrete or premix carpet, suitable for soiling and murrum filling including excavation for laying of pipe upto 150 mm dia and Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.
100
-
-
Supplying and fixing of cast iron air release valve of 80 mm dia of bore with two air outlets, conforming to IS 14845 complete all as specified and directed.
4
-
-
Supplying and fixing of cast iron air release valve of 100 mm dia of bore with two air outlets, conforming to IS 14845 complete all as specified and directed.
4
-
-
Supplying and fixing of cast iron air release valve of 150 mm dia of bore with two air outlets, conforming to IS 14845 complete all as specified and directed.
4
-
-
M&L for construction of valve chamber of internal size 1200x1200x1200 mm suitable for 80 mm dia sluice valve including necessary earthwork excavation PCC 1:4:8 in foundation type D2 using 40 mm graded stone aggregate , brick wall in CM 1:4 and PCC coping 1:2:4 type B1 and 15 mm thick rendering in CM 1:4 including provision of MS sheet cover 3 mm thick with MS angle frame 40x40x6 mm all round and also MS plate welded to MS angle as shown on drawing embedded in concrete with suitable hinge and locking arrangement including two coat of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as shown & specified in details in TD Drg No. CEJZ/TD/819/91 sheet 1/1 dt 16/04/1991 and as directed including dismantling of existing valve pit complete all as specified and directed.
24
-
-
M&L for construction of valve chamber of internal size 900x900x1200 mm suitable for 100 mm dia sluice valve including necessary earthwork excavation PCC 1:4:8 in foundation type D2 using 40 mm graded stone aggregate , brick wall in CM 1:4 and PCC coping 1:2:4 type B1 and 15 mm thick rendering in CM 1:4 including provision of MS sheet cover 3 mm thick with MS angle frame 40x40x6 mm all round and also MS plate welded to MS angle as shown on drawing embedded in concrete with suitable hinge and locking arrangement including two coat of synthetic enamel paint over a coat of red oxide primer necessary excavation earth work etc complete all as specified and as shown & specified in details in TD Drg No. CEJZ/TD/819/91 sheet 1/1 dt 16/04/1991 and as directed including dismantling of existing valve pit complete all as specified and directed.
20
-
-
Supplying and fixing for structural steel section support for covering valve pit along with angle bracing, support clamps and back plates fabricated including nuts, bolts, washers, welding, bending, cold or hot drilling holes for bolts in any shape or size as indicated and also provide T for operating of the valve as required length including two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
400
-
-
Supply & fix in replacement of , 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed.
(Note-Min weight should not be less than 210 gms)
25
-
-
Supply & fix in replacement of , 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed.
(Note-Min weight should not be less than 210 gms)
25
-
-
Supply & fix in replacement of , 40 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed.
(Note-Min weight should not be less than 210 gms)
14
-
-
Supply & fix in replacement of , 50 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed.
(Note-Min weight should not be less than 210 gms)
13
-
-
Supplying and laying in replacement of 3-layer PPR Polypropylene random (co-polymer) concealed pipes of 16 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.
150
-
-
Supplying and laying in replacement of 3-layer PPR Polypropylene random (co-polymer) concealed pipes of 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.
100
-
-
Supplying and laying in replacement of 3-layer PPR Polypropylene random (co-polymer) concealed pipes of 25 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.
100
-
-
Supplying and fixing in replacement of PPR Gate valves (brass insert) of 20 mm bore complete all as specified and directed.
20
-
-
Supplying and fixing in replacement of PPR Gate valves (brass insert) of 25 mm bore complete all as specified and directed.
20
-
-
Making connection of PP-R distribution branch with PP-R main of 16 to 40 mm sizes by providing and fixing tee including cutting and making fusion joint etc. complete all as specified and directed.
100
-
-
Taking up submersible pump assembly including column pipe approx. 50 to 70 mtrs using chain pully block manually for 10-25 HP pumps and lowering the pump including reconnecting with existing pipe and making connection with panel board & starter complete all as specified and directed.
33
-
-
M&L for rewinding the 10 HP submersible motor with super enamelled copper wire with appropriate same guage of existing coil with similar class of existing insulation as recommended by manufacturer with high quality normex insulating paper and applying best quality insulating varnish on starter/rotor winding drying them completely including testing the insulation to the entire satisfaction complete all as specified and directed.
6
-
-
M&L for rewinding the 12.5 HP submersible motor with super enamelled copper wire with appropriate same guage of existing coil with similar class of existing insulation as recommended by manufacturer with high quality normex insulating paper and applying best quality insulating varnish on starter/rotor winding drying them completely including testing the insulation to the entire satisfaction complete all as specified and directed.
12
-
-
M&L for rewinding the 15 HP submersible motor with super enamelled copper wire with appropriate same guage of existing coil with similar class of existing insulation as recommended by manufacturer with high quality normex insulating paper and applying best quality insulating varnish on starter/rotor winding drying them completely including testing the insulation to the entire satisfaction complete all as specified and directed.
6
-
-
M&L for rewinding the 17.5 HP submersible motor with super enamelled copper wire with appropriate same guage of existing coil with similar class of existing insulation as recommended by manufacturer with high quality normex insulating paper and applying best quality insulating varnish on starter/rotor winding drying them completely including testing the insulation to the entire satisfaction complete all as specified and directed.
1
-
-
M&L for rewinding the 20 HP submersible motor with super enamelled copper wire with appropriate same guage of existing coil with similar class of existing insulation as recommended by manufacturer with high quality normex insulating paper and applying best quality insulating varnish on starter/rotor winding drying them completely including testing the insulation to the entire satisfaction complete all as specified and directed.
4
-
-
M&L for rewinding the 25 HP submersible motor with super enamelled copper wire with appropriate same guage of existing coil with similar class of existing insulation as recommended by manufacturer with high quality normex insulating paper and applying best quality insulating varnish on starter/rotor winding drying them completely including testing the insulation to the entire satisfaction complete all as specified and directed.
4
-
-
Dismantling submersible pump set 10 HP from column pipe and separating the multistage pump & transporting to workshop for repair i.e. cleaning and derusting of casing, replacement of wornout spare like bearing, impellar bushing, coupling etc & refixing of existing serviceable components after proper cleaning, matching all as required & assembling testing at workshop complete including carrying out painting by two coats of sythetic enamel paint ovar a coat of primer assembling the pump and motor including testing the pump entire satisfaction of Engineer-in-Charge complete all as specified and directed. Note :- Cost of lowering of pump set in borewell and fixing of spare parts shall be deemed to be included in the quoted rate of contractor.
6
-
-
Supply only bearing suitable for submersible pump set of 10 HP
6
-
-
Supply only impellar suitable for submersible pump set of 10 HP
6
-
-
Supply only impellar bushing suitable for submersible pump set of 10 HP
6
-
-
Supply only coupling suitable for submersible pump set of 10 HP
6
-
-
Dismantling the submersible pump set 12.5 HP from column pipe and separating the multistage pump & transporting to workshop for repair i.e. cleaning and derusting of casing, replacement of wornout spare like bearing, impellar bushing, coupling etc & refixing of existing serviceable components after proper cleaning, matching all as required & assembling testing at workshop complete including carrying out painting by two coats of sythetic enamel paint ovar a coat of primer assembling the pump and motor including testing the pump entire satisfaction of Engineer-in-Charge complete all as specified and directed. Note :- Cost of lowering of pump set in borewell and fixing of spare parts shall be deemed to be included in the quoted rate of contractor.
12
-
-
Supply only bearing suitable for submersible pump set of 12.5 HP
12
-
-
Supply only impellar suitable for submersible pump set of 12.5 HP
12
-
-
Supply only impellar bushing suitable for submersible pump set of 12.5 HP
12
-
-
Supply only coupling suitable for submersible pump set of 12.5 HP
12
-
-
Dismantling the submersible pump set 15 HP from column pipe and separating the multistage pump & transporting to workshop for repair i.e cleaning and derusting of casing, replacement of wornout spare like bearing, impellar bushing, coupling etc & refixing of existing serviceable components after proper cleaning, matching all as required & assembling testing at workshop complete including carrying out painting by two coats of sythetic enamel paint ovar a coat of primer assembling the pump and motor including testing the pump entire satisfaction of Engineer-in-Charge complete all as specified and directed. Note :- Cost of lowering of pump set in borewell and fixing of spare parts shall be deemed to be included in the quoted rate of contractor.
6
-
-
Supply only bearing suitable for submersible pump set of 15 HP
6
-
-
Supply only impellar suitable for submersible pump set of 15 HP
6
-
-
Supply only impellar bushing suitable for submersible pump set of 15 HP
6
-
-
Supply only coupling suitable for submersible pump set of 15 HP
6
-
-
Dismantling the submersible pump set 20 HP from column pipe and separating the multistage pump & transporting to workshop for repair i.e cleaning and derusting of casing, replacement of wornout spare like bearing, impellar bushing, coupling etc & refixing of existing serviceable components after proper cleaning, matching all as required & assembling testing at workshop complete including carrying out painting by two coats of sythetic enamel paint ovar a coat of primer assembling the pump and motor including testing the pump entire satisfaction of Engineer-in-Charge complete all as specified and directed. Note :- Cost of lowering of pump set in borewell and fixing of spare parts shall be deemed to be included in the quoted rate of contractor.
4
-
-
Supply only bearing suitable for submersible pump set of 20 HP
4
-
-
Supply only impellar suitable for submersible pump set of 20 HP
4
-
-
Supply only impellar bushing suitable for submersible pump set of 20 HP
4
-
-
Supply only coupling suitable for submersible pump set of 20 HP
4
-
-
Dismantling the submersible pump set 25 HP from column pipe and separating the multistage pump & transporting to workshop for repair i.e. cleaning and derusting of casing, replacement of wornout spare like bearing, impellar bushing, coupling etc & refixing of existing serviceable components after proper cleaning, matching all as required & assembling testing at workshop complete including carrying out painting by two coats of sythetic enamel paint ovar a coat of primer assembling the pump and motor including testing the pump entire satisfaction of Engineer-in-Charge complete all as specified and directed. Note :- Cost of lowering of pump set in borewell and fixing of spare parts shall be deemed to be included in the quoted rate of contractor.
4
-
-
Supply only bearing suitable for submersible pump set of 25 HP
4
-
-
Supply only impellar suitable for submersible pump set of 25 HP
4
-
-
Supply only impellar bushing suitable for submersible pump set of 25 HP
4
-
-
Supply only coupling suitable for submersible pump set of 25 HP
4
-
-
Taking out centrifugal pump set 125 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/overhauling including cleaning of all parts of pump assembly thoroughly including machine work of pump shaft in order to obtain smooth finish including necessary polishing etc and transporting to MES pump house, fitting on foundation, using helium gasket sheet not less then 1 mm thick & to the entire satisfaction complete all as specified and directed by Engineer-in- Charge. Notes:- (i) spare parts as required shall be measured and paid for separately against the relevant items. (ii) Make/sizes and specification of spare part shall be same as per existing centrifugal pump. (iii) Cost of fixing of spare parts shall be deemed to be included in the quoted rate of this item.
1
-
-
Supply only casing wear ring suitable for 125 HP of centrifugal pump set
1
-
-
Supply only shaft sleeve suitable for 125 HP of centrifugal pump set
1
-
-
Supply only inter stage ring suitable for 125 HP of centrifugal pump set
1
-
-
Supply only ball bearing SKF-7310-/NU411 suitable for 125 HP of centrifugal pump set
1
-
-
Supply only ball bearing SKF-6310 C3 -/6311 suitable for 125 HP of centrifugal pump set
1
-
-
Supply only bearing cartridge DE suitable for 125 HP of centrifugal pump set
1
-
-
Supply only bearing cartridge NDE suitable for 125 HP of centrifugal pump set
1
-
-
Supply only shaft sleeve nuts suitable for 125 HP of centrifugal pump set
1
-
-
Supply only split glands suitable for 125 HP of centrifugal pump set
1
-
-
Taking out of centrifugal pump set 75 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/overhauling including cleaning of all parts of pump assembly thoroughly, including machine work of pump shaft in order to obtain smooth finish including necessary polishing etc and transporting to MES pump house, fitting on foundation, using helium gasket sheet not less then 1 mm thick & to the entire satisfaction complete all as specified and directed by Engineer-in-Charge. Notes:- (i) spare parts as required shall be measured and paid for separately against the relevant item. (ii) Make/sizes and specification of spare part shall be same as per existing centrifugal pump. (iii) Cost of fixing of spare part shall be deemed to be included in the quoted rate of this item.
2
-
-
Supply only casing wear ring suitable for 75 HP of centrifugal pump set
2
-
-
Supply only shaft sleeve suitable for 75 HP of centrifugal pump set
2
-
-
Supply only inter stage ring suitable for 75 HP of centrifugal pump set
2
-
-
Supply only ball bearing SKF-7310-/NU411 suitable for 75 HP of centrifugal pump set
2
-
-
Supply only ball bearing SKF-6310 C3 -/6311 suitable for 75 HP of centrifugal pump set
2
-
-
Supply only bearing cartridge DE suitable for 75 HP of centrifugal pump set
2
-
-
Supply only bearing cartridge NDE suitable for 75 HP of centrifugal pump set
2
-
-
Supply only shaft sleeve nuts suitable for 75 HP of centrifugal pump set
2
-
-
Supply only split glands suitable for 75 HP of centrifugal pump set
2
-
-
Taking out centrifugal pump set 60 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/overhauling including cleaning of all parts of pump assembly thoroughly, including machine work of pump shaft in order to obtain smooth finish including necessary polishing etc and transporting to MES pump house, fitting on foundation, using helium gasket sheet not less then 1 mm thick & to the entire satisfaction complete all as specified and directed by engr in charge. Note:- (i) spare parts as required shall be measured and paid for separately against the relevant item. (ii) Make/sizes and specification of spare part shall be same as per existing centrifugal pump. (iii) Cost of fixing of spare part shall be deemed to be included in the quoted rate of this item.
4
-
-
Supply only casing wear ring suitable for 60 HP of centrifugal pump set
4
-
-
Supply only shaft sleeve suitable for 60 HP of centrifugal pump set
4
-
-
Supply only inter stage ring suitable for 60 HP of centrifugal pump set
4
-
-
Supply only ball bearing SKF- 6306/6307 suitable for 60 HP of centrifugal pump set
4
-
-
Supply only ball bearing SKF- 6309 /6310 /6312 C3 suitable for 60 HP of centrifugal pump set
4
-
-
Supply only bearing cartridge DE suitable for 60 HP of centrifugal pump set
4
-
-
Supply only bearing cartridge NDE suitable for 60 HP of centrifugal pump set
4
-
-
Supply only shaft sleeve nuts suitable for 60 HP of centrifugal pump set
4
-
-
Supply only split glands suitable for 60 HP of centrifugal pump set
4
-
-
Taking out centrifugal pump set 50 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/overhauling including cleaning of all parts of pump assembly thoroughly, including machine work of pump shaft in order to obtain smooth finish including necessary polishing etc and transporting to MES pump house, fitting on foundation, using helium gasket sheet not less then 1 mm thick & to the entire satisfaction complete all as specified and directed by Engineer-in- Charge. Note:- (i) spare parts as required shall be measured and paid for separately against the relevant item. (ii) Make/sizes and specification of spare part shall be same as per existing centrifugal pump. (iii) Cost of fixing of spare part shall be deemed to be included in the quoted rate of this item.
3
-
-
Supply only casing wear ring suitable for 50 HP of centrifugal pump set
3
-
-
Supply only shaft sleeve suitable for 50 HP of centrifugal pump set
3
-
-
Supply only inter stage ring suitable for 50 HP of centrifugal pump set
3
-
-
Supply only ball bearing SKF- 6306/6307 suitable for 50 HP of centrifugal pump set
3
-
-
Supply only ball bearing SKF- 6309 /6310 /6312 C3 suitable for 50 HP of centrifugal pump set
3
-
-
Supply only bearing cartridge DE suitable for 50 HP of centrifugal pump set
3
-
-
Supply only bearing cartridge NDE suitable for 50 HP of centrifugal pump set
3
-
-
Supply only shaft sleeve nuts suitable for 50 HP of centrifugal pump set
3
-
-
Supply only split glands suitable for 50 HP of centrifugal pump set
3
-
-
Taking out of centrifugal pump set 15 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/overhauling including cleaning of all parts of pump assembly thoroughly, including machine work of pump shaft in order to obtain smooth finish including necessary polishing etc and transporting to MES pump house, fitting on foundation, using helium gasket sheet not less then 1 mm thick & to the entire satisfaction complete all as specified and directed by Engineer-in-Charge. Note:- (i) spare parts as required shall be measured and paid for separately against the relevant item. (ii) Make/sizes and specification of spare part shall be same as per existing centrifugal pump. (iii) Cost of fixing of spare part shall be deemed to be included in the quoted rate of this item.
1
-
-
Supply only casing wear ring suitable for 15 HP of centrifugal pump set
1
-
-
Supply only shaft sleeve suitable for 15 HP of centrifugal pump set
1
-
-
Supply only inter stage ring suitable for 15 HP of centrifugal pump set
1
-
-
Supply only ball bearing SKF- 6306/6307 suitable for 15 HP of centrifugal pump set
1
-
-
Supply only ball bearing SKF- 6309 /6310 /6312 C3 suitable for 15 HP of centrifugal pump set
1
-
-
Supply only bearing cartridge DE suitable for 15 HP of centrifugal pump set
1
-
-
Supply only bearing cartridge NDE suitable for 15 HP of centrifugal pump set
1
-
-
Supply only shaft sleeve nuts suitable for 15 HP of centrifugal pump set
1
-
-
Supply only split glands suitable for 15 HP of centrifugal pump set
1
-
-
Taking out centrifugal pump set 7.5 HP from pump foundation after disconnection from motor and transportation to workshop , dismantling the pump for repair/overhauling including cleaning of all parts of pump assembly throughly, incling machine work of pump shaft in order to obtain smooth finish including necessary polidhing etc and transporting to MES pump house, fitting on foundation, using helium gasket sheet not less then 1 mm thick & to the entire satisfaction complete all as specified and directed by engr in charge. Notes:- (i) spare parts as required shall be measured and paid for separately against the relevant item. (ii) Make/sizes and specification of spare part shall be same as per existing centrifugal pump. (iii) Cost of fixing of spare part shall be deemed to be included in the quoted rate of this item.
1
-
-
Supply only casing wear ring suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only shaft sleeve suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only inter stage ring suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only ball bearing SKF- 6306/6307 suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only ball bearing SKF- 6309 /6310 /6312 C3 suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only bearing cartridge DE suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only bearing cartridge NDE suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only shaft sleeve nuts suitable for 7.5 HP of centrifugal pump set
1
-
-
Supply only split glands suitable for 7.5 HP of centrifugal pump set
1
-
-
Taking out centrifugal pump set 125 HP from pump foundation after uncoupling mechanically and disconnection electrically from pump , disengaging the defective AC squirrel cage induction motor 3 phase 415 volts , 50 cycles and transportation the induction motor to workshop for repair purpose including complete cleaning , varnishing, reinsulation, greasing and including shifting back to MES pump house as directed including installing , testing and commissioning after repair to the entire satisfaction of Engineer-in-Charge, complete all as specified and directed by Note:- (i) Rewinding will be measured and paid for separately against the relevant item.
1
-
-
Description same as per Srl Item No. 109.00 but 75 HP induction motor of centrifugal pump set complete.
1
-
-
Description same as per Srl Item No. 109.00 but 60 HP induction motor of centrifugal pump set complete.
2
-
-
Description same as per Srl Item No. 109.00 but 50 HP induction motor of centrifugal pump set complete.
1
-
-
Description same as per Srl Item No. 109.00 but 15 HP induction motor of centrifugal pump set complete.
5
-
-
M&L for rewinding the 125 HP centrifugal induction motor with super enamelled copper winding wire with appropriate same gauge of existing coil with similar class of existing insulation as recommended by manfacturer with high quality normex insulating paper and applying best quality insulating varnish on stator/rotor winding and drying them completely, testing the insulation to the entire satisfaction complete all as specified and directed by Engineer-in-Charge.
1
-
-
Description same as per Srl Item No. 114.00 but 75 HP induction motor of centrifugal pump set complete.
2
-
-
Description same as per Srl Item No. 114.00 but 60 HP induction motor of centrifugal pump set complete.
4
-
-
Description same as per Srl Item No. 114.00 but 50 HP induction motor of centrifugal pump set complete.
3
-
-
Description same as per Srl Item No. 114.00 but 15 HP induction motor of centrifugal pump set complete.
5
-
-
Description same as per Srl Item No. 114.00 but 7.5 HP induction motor of centrifugal pump set complete.
1
-
-
M&L, in replacement, fully automatic star delta motor starter 125 HP in sheet steel enclosure type ML with single phase protection feature (Motor rating AC-36 duty, 415 V , 50 Hz, 3 Ph) and relay range 66-110 etc. to the entire satisfaction complete of Engineer-in-Charge complete all as specified and directed.
1
-
-
M&L, in replacement, fully automatic star delta motor starter 75 HP in sheet steel enclosure type ML with single phase protection feature (Motor rating AC-36 duty, 415 V , 50 Hz, 3 Ph) and relay range 45-75 etc. to the entire satisfaction of Engineer-in-Charge complete all as specified and directed.
2
-
-
M&L, in replacement, fully automatic star delta motor starter 60 HP in sheet steel enclosure type ML with single phase protection feature (Motor rating AC-36 duty, 415 V , 50 Hz, 3 Ph) and relay range 43-63 etc. to the entire satisfaction of Engineer-in-Charge complete all as specified and directed.
6
-
-
M&L for trimming vegetation or small inequalities, clearing all grass vegetation, saplings, shrubs, brushwood, roots inside the sump or valve pits, and trees of surrounding area including and removing rubbish upto a distance of 50 m outside the periphery of the area under clearance of water supply installation and sumps complete all as specified and directed.
1050
-
-
M&L draining water from OHT upto 50000 gallon capacity reservoirs not exc. 20 metre staging and cleaning internal portion of tank (bottom and walls) by means of coirs/ wire brush etc. and wash the internal portion of tanks by using bleaching powder @25 gram per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc. 50 m including one coat of synthetic enamel paint on all steel surfaces such as ladder, railing, inlets & over flow CI pipes connected sluice valves of the respective OH tanks reservoir etc., writing letter with white paint ( Date of cleaning and capacity of tank ) on black painted surface of tanks and also to provide water level alarm on tank full complete all as specified and directed.
4
-
-
M&L draining water from OHT upto 100000 gallon capacity reservoirs not exc. 20 metre staging and cleaning internal portion of tank (bottom and walls) by means of coirs/ wire brush etc. and wash the internal portion of tanks by using bleaching powder @25 gram per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc. 50 m including one coat of synthetic enamel paint on all steel surfaces such as ladder, railing, inlets & over flow CI pipes, connected sluice valves of the respective OH tanks reservoir etc., writing letter with white paint ( Date of cleaning and capacity of tank ) on black painted surface of tanks and also to provide water level alarm on tank full complete all as specified and directed.
4
-
-
M&L draining water from semi underground reservoir /sump, upto 100000 gallon capacity reservoirs and cleaning internal portion of sump (bottom and walls) by means of coirs/ wire brush etc. and wash the internal portion of tanks by using bleaching powder @25 gram per 1000 Ltrs of water after removing sludge and mud etc to a distance not exc. 50 m including one coat of synthetic enamel paint on all steel surfaces such as inlets & over flow CI pipes, connected sluice valves of the respective ground level reservoir etc., writing letter with white paint ( Date of cleaning and capacity of tank ) on black painted surface of tanks complete all as specified and directed.
8
-
-
Supplying and fixing in replacement of the following parts of float and board type level indicator for over head tank :-
-
-
-
Float Size 280mm x80 mm
11
-
-
Pulley : SS 316
11
-
-
Limb pipe : MS powder coated /SS 304
11
-
-
Rope size 2 mm
11
-
-
Rope clamp SS 304
11
-
-
Mounting flange : size 1 to 3 with 10 mm thickness, ANSI standard
11
-
-
Counter flange with nozzle (optional): MS/SS 304
11
-
-
Anchor : SS 304
11
-
-
scale board : 150 mm wide pure polyster weather proof powder coated aluminium board / SS 304
11
-
-
Pointer : mild steel with powder coated/ SS 304 pointer with frictionless rollers
11
-
-
Scale marking : printed scale with black marking (CM) & reflective red radium marking (meter)
11
-
-
Chemical Analysis of water of borewell and external source water for all parameters for ascertaining water fitness (Portability and bacterial) for human consumption through Government/ NABL approved laboratory with necessary collector vessels/cans. complete all as specified and directed by Engr-in-Charge. NOTE:- Each job consists of 23 samples to be collected from different locations of borewells on contractor's own arrangment.
24
-
-
M&L, in replacement, submersible pump MU-G 25 FASD Three phase submersible pump Controllers with single phase preventer of 25 HP in sheet-steel enclosoure type ML with Wideband coil conforming to HSN Code 8536 complete all as as directed .
10
-
-
M&L, in replacement, submersible pump MU-G 20 FASD Three phase submersible pump Controllers with single phase preventer of 20 HP in sheet-steel enclosoure type ML with Wideband coil conforming to HSN Code 8536 complete all as as directed .
10
-
-
M&L, in replacement, submersible pump MU-G 15 FASD Three phase submersible pump Controllers with single phase preventer of 15 HP in sheet-steel enclosoure type ML with Wideband coil conforming to HSN Code 8536 complete all as specified and as directed .
9
-
-
S & F PVC Insulated unsheathed submerible cable 10 sqmm cross section, three core multistranded bright annealed copper conuctor 1100 volts, including taking down complete all as specified and as directed.
900
-
-
S & F PVC Insulated unsheathed submerible cable 16 sqmm cross section three core multistranded bright annealed copper conuctor 1100 volts, including taking down complete all as specified and as directed .
810
-
-
AMC of Altoch GP Dosing System of 100 litre with following specification:-Doser pump 0.9 Amp, 250 volt 100psi, Doser motor 0.8 Amp, 220 volts, PVC pipe connection inlet to Doser and outlet to Doser, Cleaning of Doser tank, all as per required and directed by engg in charg. Note:- (a) Defective items if replaced shall be measured and paid for separately under relavent item(s) of this BOQ.
10
-
-
Supply only against itme no. 134 above chemical dosing pump suitable for 100 Ltrs Dosing system, complete all as specified and directed.
4
-
-
Supply only against itme no. 134 above electric motor suitable for 100 ltrs Dosing system, complete all as specified and directed.
4
-
-
Supply only against itme no. 134 nozzle injector suitable for 100 ltrs Dosing system, complete all as specified and directed.
4
-
-
Supply only against itme no. 134 Electric stirrer suitable for 100 ltrs Dosing system, complete all as specified and directed.
4
-
-
Supply only against itme no. 134 Suction lance with foot valve suitable for 100 ltrs Dosing system, complete all as specified and directed.
5
-
-
S&F MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed.
20
-
-
S&F MCCB 4 Pole, 415 V, Adjustable type, 350 Amps with breaking capacity 36 KA complete all as specified and directed.
18
-
-
S&F MCCB 4 Pole, 415 V, Adjustable type, 400 Amps with breaking capacity 36 KA complete all as specified and directed.
15
-
-
Taking down unserviceable mono block pump 0.5-1 HP, Single Phase 230 volt 1200 RPM, 50 Hz for busting of water supply with GI pipe fittings after disconnection from motor and transportation to worksshop, dismantling the pump for repair/overhauling including clearing of all parts of pump assembly thoroughly, including machie work of pump shaft in order to obtain smooth finish including necessary polishing etc and installing back including helium gasket sheet not less then 1mm thick to the entire satisfaction of Engineer-in-Charge complete all as specified and directed. Note : Cost of fixing of spare parts shall be included in the quoted rate of this item.
6
-
-
Supply only Casing wear Ring against item no. 143 above
6
-
-
Supply only Casing shaft sleeve against item no. 143 above
6
-
-
Supply only Inter Stage Ring against item no. 143 above
6
-
-
Supply only Ball bearing SKF-6306/6307 against item no. 143 above
6
-
-
Supply only shaft Nuts against item no. 143 above
6
-
-
Supply only Split Gland against item no. 143 above
4
-
-
Taking down old unserviceable GI Pipes Heavy grade pipe of 80 mm dia submersible column pipe from borewell complete all as specified and directed.
600
-
-
Supply and fixing lowering and jointing 80 mm dia UPVC slotted pipes 10 mm thick conforming to IS-12818-1992 including jointing, with necessary fitting/fixture of pipe complete all as specified and directed .
600
-
-
Taking down old unserviceable GI Pipes Heavy grade pipe of 50 mm dia submersible column pipe from borewell complete all as specified and directed .
600
-
-
Supply and fixing lowering and jointing 50 mm dia UPVC slotted pipes 10 mm thick conforming to IS-12818-1992 including jointing, with necessary fitting/fixture of pipe complete all as specified and directed .
350
-
-
M & L for flushing out/ desilting of the bore well by using compresser hydro pressure jet till clear the casing pipe by achieving clear water, and washing with hydro pressure jet using foam/oils, disinfecting by using sodium hypochloride solution and washing out till water is obtained to the required turbidity (clean water) to the entire satisfaction of Engr-in-Charge.
72
-
-
M&L, in replacement, water meter bore of pipe in 100 mm with flanged joint; including removal of flanged connecting piece, or blank flange a length of flanged connecting pipe (or two blank flanges) and labour only for two flanged joint complete all as specified and directed.
30
-
-
Material and labour to attend breakdown complaints like no water supply in service tank, pipe line, leakages of size upto 50 mm dia etc and also removing air lock MD/OTM accomodation with help of required tools and GI fittings of any size/ dia, union, elbow, tee, bend, nipple, socket, etc including excavation if required for rectification of leakage of GI pipe complete all as specified and directed by Engr-in-Charge.
Note :- Cost of items such as union, elbow, nipple, socket etc of required size shall be deemed to be included in quoted rate.
250
-
-
Rectification/ arresting of leakage in the underground CI/DI pipe water line 80 mm to 200 mm dia including necessary excavation and filling in wet condition including taking out existing pipe/ cutting of pipe and stopping of water leakage, repair of CI pipe line buring out / removing lead joints and refixing pipe / fitting in original position realigning to existing CI collar at both ends, testing of leakage complete all as specified and directed.
Notes:- (i) CI/DI pipe shall be measured and paid for seperately.
(ii) CI fitting, lead, lead wool wool if required for stopping the leakage shall be supplied by the contractor without any extra cost.
(iii) Cost of excavation is deemed to be included in the quoted rate.
60
-
-
Notes for day to day complaints :- (1) The time limit for attending the complaints on intimation to the contractors by the department shall be as under :- (a) Repair to motor/pump - within 02 days. (b) Other Misc jobs - within 01 day , (2) In case contractor fails to attend/rectify the defects within the above time limit, penalty will be imposed as Rs 1000/- per day in case of complaints/jobs mentioned at Note (a) & (b) above. (3) Contractor or his authorised representative shall report to concerned JE Or Engineer-in-Charge at 0930 hrs daily on all working days to receive order/instructions of the work or regular complaints. A register shall be maintained to record all orders & instruction and their complaints and is to be signed by the contractor or his representative and Engineer-in-Charge /JE.
-
-
-
Schedule of credit amount of Rs. 5,06,804.00 to be deducted during AOC
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements