Military Engineer Services Tender

Disconnecting existing tanks of capacity exc 250 litre but n. exc 500 litre for repair work and refixing the same after repair work on roof is over complete all as specified and directed.

All as per Item No 4.00 here-in-before but capacity of tank exc 500 litres and n. exc 1000 litres.

Taking up or down 15mm bore steel tubing and connections including removal from site complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections including removal from site complete all as specified and as directed.

Supply and fix Unplasticized PVC pipes of bore 15mm, pressure rating 10 Kg/Sqcm fixed to walls, ceilings or laid in floors etc complete all as specified and as directed

Supply and fix Unplasticized PVC pipes of bore 20mm, pressure rating 10 Kg/Sqcm fixed to walls, ceilings or laid in floors etc complete all as specified and as directed

Taking down eaves gutters and rain water pipes of any size/ pattern with all the fittings complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, 75mm bore in any length with rubber ring joints and jointed with adhesive and laid in floors or fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors or fixed to walls complete all as specified and directed.

S&F 110 PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed.

Demolition of sunken slab floor or WC and Bath including WC trap etc including taking down loose filling of aggregate in any type and removing where directed and providing water proofing treatment of sunken slab as following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROOF LW of Dr Pidilite or equivalent in make given in Appendix 'B' to PS as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface imperfections. (c) Fixing 40mm dia PVC Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor and seal it (Bath seal tape product of sika/fosroc/M/s choksey and grouting around the inserted pipes using sika/fosroc/M/s choksey bath seal grout as directed. (d) Make angle fillets by mixing sand cement and sika/fosroc/m/s choskey pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of M/s Sika/Fosroc/M/s choksey bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by volume and providing upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit or equivalent make as per manufacturer'sinstructions in sunken slab over brick bat . (g) Fill the sanitary gaps with M/s Sika/Fosroc/M/s choksey sealing compounds complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, 75mm dia plain with grating including jointing with solvent cement cement etc complete all as specified and directed.

M&L in repair PVC (SWR) gully trap, 110mm dia plain with grating including jointing with solvent cement cement etc complete all as specified and directed.

M&L in repair PVC (SWR) multi floor trap, 75mm dia plain with grating including jointing with solvent cement cement etc complete all as specified and directed.

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material exc 1.5km but n. exc 2.5 KM distance and depositing where as directed, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

M&L, for 25 thick PCC 1:2:4 type B-O using 12.5 mm gradred stone aggregate as in levelling course finished even an fair without using extra cement complete all as specified and directed.

M&L for non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6 )complete all as specified and directed.

M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified in SSR and complete all as specified and directed.

S&F in repairs viterous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) with 'P' or 'S' trap but including fixing of seat and seat cover & connecting to trap and flush pipe set & providing concrete for making good to floor complete all as spd and directed.

Supply only seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified and directed by Engr-in-charge.

Supply and fix in repair of PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set complete all as specified and directed.

Repairs to flushing cistern by adjusting the float valve leakinge of PVC connection, PVC/GI bend incl replacing of rubber washer check nuts plunges etc for any type of flush complete all as specified and directed.

S&F in repairs Chromium Plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair CP health faucet (ABS Body) mild steel sutable for 15 mm dia pipe with 1.25 Mtr long flexible tube including wall hook complete all as specified and directed.

S&F in repairs PTMT waste coupling 32x100mm sink complete all as specified and directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, quarter turn with water saving nozzle, high pressure, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repair single lever wash hand basin mixer with with 450 mm long braided connection pipe (without popup) complete all as specified and directed

S&F in repair 15 mm bore CP wall mixer (2-in-1) with provison for bath overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without overhead shower) fixed in iron pipes etc all as specified and directed.

S&F in repair stop valve cast copper alloy fency type with long shank and cup (concealed type) with crutch or butterfly handle screwed downboth ends for high pressure as per ISI suitable for 15mm dia iron pipe complete all as specified and directed.

S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water quarter turn with water saving nozzle for iron pipe and fixed long body for kitchen sink complete all as specified and directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, quarter turn with water saving nozzle, fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F in repairs PTMT waste pipe 32 x 800 mm for WHB / sink complete all as specified and directed.

S&F for brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long complete all as specified and directed.

S&F front glass Shelf 5.5mm thick (chrome finish) of size 300mmx150mm fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F corner galss shelf 8mm thick (pack of three) of (chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

Repair to leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock/wall mixer etc by replacing of necessary brass spindles as required complete all as specified and directed.

Repairing to leakage in concealed stop cock 15/20 mm bore by replacing of necessary brass spindles half round turn/full round turn as required complete all as specified and directed.

S&F in repairs grating doom 125 mm dia with waste hole of stainless steel complete all as specified and directed by Engineer-in-Charge

S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Min wt 15mm-142gms/20mm-210gms/25mm -455gms /40mm-690gms) all as specified

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick wall with mixing liquid water proofing compound (WPC) as per manufacture's direction by weight of cement finished even & smooth without using extra cement in CM 1:4 complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces as on ceiling / roof projection /chajja finished even and smooth without using extra cement incl necessary formwork etc all as specified and as directed.

M & L preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. Note :- Cement base paint and primer coat shall be done by using hand roller.

Taking down chowkat or frames with shutter (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed.

S&F Butt hinges, medium weight cold rolled Stainless steel 75 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and directed.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

Taking down shutters of any description area exc 1 Sqm and n.exc 2Sqm each complete all as specified and all as directed.

S & F 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm.

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed...

Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed.

S&F in repair tank cover black (with arrangement for locking) of water storage tank of any capacity complete all as specified & directed.

S&F in repairs Mirror of selected Quality glass 600 x 450mm, bevelled edge mounted on 6mm thick plywood commercial fixed to wooden plugs with CP brass screws & cup washers, complete all as specified and as directed by Engineer-in-Charge.