Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Healthcare and Medicine
Eprocure
Opening Date19 Sep 2024
Closing Date17 Oct 2024
Tender Amount₹ 25,00,000
Costs
EMD
₹ 50,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_675499_1Bid Award Id
ViewTender No
8843/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer complete all as specified and directed by Eng-in-charge.
40
-
-
S&F Plain 0.71mm thick Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Eng-in-charge.
3
-
-
M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Eng-in-charge.
50
-
-
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, PVC etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Eng-in-charge.
60
-
-
S&F of Solid PVC Wall Lining consisting of 5mm thick wood Printed PVC sheet used instead of plain colour PVC sheet inclusive of solvent cement and end line L /C strip of same color and pattern and fixing at site as per specifications and drawing (approved color and shade) complete all as specified and directed by Eng-in-charge.
25
-
-
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
35
-
-
S&F Seamless 12mm thick calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws
having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including preparation of ceiling surface and applying two coat of oil bound distemper (approved pattern and color) complete all as specified and directed by Eng-in-charge.
35
-
-
Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed by Eng-in-charge.
0.3
-
-
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and grinding polishing of edges complete all as specified and directed by Eng-in-charge.
3
-
-
Taking out/ removal of settled Bricks/ Interlocking blocks any thickness (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) laid dry and pointed and stacking at site complete all as specified and directed by Eng-in-charge.
8
-
-
M&L for refixing of Brick/ Interlocking blocks any thickness as in pathway or hardstanding (except tiles) etc complete all as specified and directed
80
-
-
S&F machine pressed precast concrete interlocking paver block (approved shape) size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed
60
-
-
S&F machine pressed precast concrete interlocking paver block any shape size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and no pigment complete all as specified and directed by Eng-in-charge.
20
-
-
M&L for sand filling under floors of interlocking tiles as specified and directed.
8
-
-
M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed of CM 1:4 all as specified and directed
30
-
-
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing outside MD land complete all as specified and directed.
32
-
-
M&L for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in post hole complete all as specified and directed.
1.5
-
-
M & L PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified and directed.
35
-
-
M&L Providing, cement concrete 1:2:4 type B1 in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including neccessary formwork complete all as specified and directed.
1
-
-
Demolition of brick or stone masnary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles and removing outside MD land complete all as specified and directed.
5
-
-
M&L brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.
3
-
-
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed
2
-
-
Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified and directed.
80
-
-
Rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 using WPC finished even and smooth without using extra cement complete all as specified. Note:- WPC shall be measured and paid separately under relevant item.
65
-
-
M&L for rendering 10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed
30
-
-
M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed.
40
-
-
M&L three coat of white wash including preparation of new plastered surfaces complete all as specified ans as directed.
25
-
-
M&L for preparing of newly plastered surface of walls and applying one layer of white putty 1-2 mm and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and directed.
30
-
-
M&L for 10mm thick cement plaster over PCC in CM 1:3 finished even and smooth (without using extra cement) and using WPC of approved make per manufacturers instruction all as spc and directed (WPC shall be measured and paid separately)
20
-
-
M&L for preparation and cleaning of newly plastered surface and applying two coat of Dr fixit Roofseal classic as per following direction. 1. Marking of 2 x 2 m area on roof surface 2. Apply Ist coat on ready surface in one direction using 1.5 ltr/ 4 sqm area 3. Apply 2nd coat using 1.0 ltr/ 4 sqm after 12 hrs in perpendicular direction of 1st coat application 4. Removal of all unwanted material and debris outside MD land.
20
-
-
M&L for applying and finishing walls with textured exterior/ interior wall paint (design and pattern approved by GE) over newly plastered surface of required shade and pattern (Two coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm all as specified and directed
20
-
-
M&L for applying and finishing walls with two coats of Acrylic Smooth exterior paint @ 1.67 ltr/10 sqm of required shade over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm all as specified and directed
20
-
-
Supply only integral water proofing compound of approved make complete all as specified and as directed
20
-
-
M&L for preparation of old/ unplasterd concrete surfaces and applying one coats of synthetic enamel paint (approved color and pattern), not otherwise described, over 10cm width or girth complete all as specified and directed
40
-
-
Hacking out old broken glass of ( any thickness, size or quality from wooden or metal frame glazed with putty or beads/cleat etc complete
47
-
-
S&F 3mm thick figured glass with oil putty, ordinary quality not exc 0.5sqm in each pane complete all as specified.
6
-
-
S&F 3mm thick plain sheet glass fixed with oil putty, ordinary quality n exc. 0.5sqm in each pane complete all as specified.
42
-
-
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed
315
-
-
M&L for approved colour & shade Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.
165
-
-
M&L for non skid cramic tiles colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor and in skirting etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed
60
-
-
M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.
20
-
-
M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed
20
-
-
M&L for coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in CM 1:4, all as specified and directed
50
-
-
M&L for coloured ceramic tiles for steps and riser and skirting in single piece of size 300x1200mm for steps and 200x1200mm for riser including 600x1200mm tile for landing of 10mm thickness (min), set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick rendering in CM 1:4, all as specified and directed
15
-
-
Taking up or down pvc/ steel tubing of 20/25mm bore and connections all as specified and directed
45
-
-
S&F CPVC pipe 20mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed.
30
-
-
S&F CPVC pipe 25mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors with and incl clamps etc complete all as specified and directed.
15
-
-
Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed
25
-
-
S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron or cpvc pipe and fixed all as specified and directed
2
-
-
S&F in repair 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
3
-
-
S&F in repairs 20mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed
15
-
-
S&F in repairs 25mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed
20
-
-
Dismantling of old broken water storage tank cap exc exc 250 ltrs and n exc 500 ltrs complete all as specified and directed
6
-
-
S&F rotational moulded polyethylene water storage tank 500 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed
6
-
-
Dismantling of old broken water storage tank cap exc 500 ltr and n exc 1000 ltrs complete all as specified and directed
3
-
-
S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed
3
-
-
S&F in repair PVC water tank cover (black/white) suitable for size 250 ltr to 500 ltr capacity etc complete all as specified and directed by Eng-in-charge.
20
-
-
S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specified and directed by Eng-in-charge.
4
-
-
S&F in repair Vitreous china under counter wash hand basin (oval shape) white of size 44cm (min) width, excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specified and directed by Eng-in-charge.
2
-
-
S&F in repair Vitreous china table top wash hand basin (design approved by GE) white of size 44cm x30cm x12cm (min), excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specifed and directed.
1
-
-
S&F in repairs vitreous china Urinal half stall type with fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in white cement, with brackets, flush pipe, and union for discharge pipe, PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing (excluding flushing cistern).
6
-
-
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed by Eng-in-charge.
4
-
-
S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 incl flush pipe and making good to floor including removing rubbish all as specified and directed.
6
-
-
S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink length not less than 80cm (upto trap) complete all as specified and directed.
40
-
-
S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed.
25
-
-
S & F in repairs PVC flushing cistern valveless, syphonic action kit and washers type, 10 litres capacity with inlet, ball valve float and handle any make with exisiting fixed, complete all as specified and directed.
30
-
-
S&F in repair fancy type 15 mm bore Pillar cock tall height, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
15
-
-
S&F in repair fancy type 15 mm bore CP swan neck Pillar taps, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
10
-
-
S&F in repair 15mm bore fancy type CP bib tap long body cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed.
75
-
-
S&F in repair CP two way bib tap 15mm dia all as specified and directed.
5
-
-
S&F in repair 15mm bore dia Chromium plated stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed
30
-
-
S&F in repair 15 mm bore CP Concealed Stop valves with long shank and cup fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe complete all as specified and directed
8
-
-
S&F in repair fancy type, brass fancy type CP wall mixer for mixing hot and cold water with provision of overhead shower with area & long pipe & wall flanged screwed down for pipe of 15mm bore size
4
-
-
S&F in repairs PVC connection 15mm dia of length not less than 600mm with both ends, brass fly nut for water supply complete all as specified & as directed.
30
-
-
S&F in repair CP towel rail 600mm long premium quality fixed with and incl CP brass screws complete all as specified and directed.
10
-
-
S&F in repairs brass chromium plated shower rose with swivel joint not less than 50mm dia and not less than 200mm long all as specified and directed.
20
-
-
S&F in repairs CP SS Soap dish premium quality, fixed to wall with plugs and screws complete all as specified and directed.
10
-
-
S&F in repair CP jet spray with flexible pipe length not less than 1.00mtr (Minimum) fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.
2
-
-
S&F in repair CP Health faucet( ABS Body) suitable for 15mm dia pipe with 1.25m long flexible steel tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified.
12
-
-
S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms).
5
-
-
S&F in repair 600mmx450mm Looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.
10
-
-
S&F in repair 5mm thick Looking mirror glass of selected quality in required size , framed with plain PVC or wood strip and mounted on wood sheet and fixed with screws all as specified and directed
8
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 2.0 sqm each complete all as specified and directed.
6
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed.
15
-
-
Taking down Shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed
30
-
-
Taking down and refixing Shutters in same opening after adjusting the size, of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed
25
-
-
M&L for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.
30
-
-
M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including plastering, painting and finishing the surfaces to match with existing surface complete all as specified and directed.
0.4
-
-
S&F 35mm thick second class hard wood factory made, plain framed panelled door shutter (any number of panels) with panel of 9mm thick BWP commercial plywood or 12mm thick veneered particle board medium dencity, wood partical board with commercial face veneers. The size of members of shutters shall be as specified in section 8 clause 8.20 (a) of SSR Part-I 1991 complete all as specified and directed.
18
-
-
S&F 35mm thick second class hard wood factory made glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed.
32
-
-
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
5.4
-
-
S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed.
30
-
-
S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed.
16.2
-
-
All as per item no. 103 but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used
instead of exposed portion of PVC sheet beading.
1.3
-
-
Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered there in.
20
-
-
S & F 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.
130
-
-
S&F Aluminum tower bolts of extruded section of size 150mm all as specified and directed.
85
-
-
S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.
92
-
-
S&F 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
35
-
-
S&F double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed.
30
-
-
M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
110
-
-
S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and as directed .
30
-
-
S&F in repairs 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.
30
-
-
S&F in repairs Aluminum tower bolts of extruded section of size 150mm all as specified and directed.
30
-
-
S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.
40
-
-
S&F in repairs 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
20
-
-
S&F in repairs double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed.
30
-
-
S&F in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed.
40
-
-
S&F in repair corner glass shelf made out of 5mm thick glass of size 225x225mm round edge provided with SS railing fixed to wall using 2 No SS bracket complete all as specified and directed. .
10
-
-
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
10
-
-
S&F in repair Door closer Aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.
8
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).
40
-
-
S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches or in floor.
15
-
-
S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring jointlai in trenches, floors or fixed to walls.
25
-
-
S&F 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door.
2
-
-
S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door.
4
-
-
S&F 75 mm bore PVC (SWR) bend in any radius.
3
-
-
S&F 110mm bore PVC (SWR) bend in any radius.
6
-
-
S&F 75 mm bore PVC (SWR) coupler in any radius.
4
-
-
S&F 110mm bore PVC (SWR) coupler in any radius.
7
-
-
S&F in repair 12mm thick toghened frosted glass pane area exc 0.50 sqm in each pane fixing as door/ windows or partition with rubber gasket , glazing clips and bedding and necessary fittings i.e fancy type handle (not less than 300mm), locking arrangement with key etc complete all as specified and directed.
3.5
-
-
S&F in repair mild steel Mortice lock 4 lever, vertical type, size 100 mm for aluminum doors complete all as specified and directed
11
-
-
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including neccesary cutting and holes for glass/ aluminum doors all as specified and directed.
8
-
-
S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frame and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, suitable aluminum handle 125mm (min), lock with key etc all complete as per architectural drawings complete all as specified and directed.
80
-
-
S&F 4.8 mm thick tinted sheet glass for fixing in window or door shutter, ordinary quality exc. 0.5sqm in each pane complete all as specified and directed.
8
-
-
Cleaning and removing all scale and dirt etc from tanks & from mouths of circulating pipes etc of service water/loft tanks in / over roof buildings at different locations of capacities as under: Note:
1. The contractor will write date of cleaning& next due date of cleaning on Tank as directed by the Engr-in-Charge.
2. At the time of cleaning disconnected pipes/fittings shall be reconnected as per existing to make it leak proof ccomplete all as specified and directed by Eng-in-charge.
-
-
-
(a) Capacity exceeding 250 but not exceeding 500 litres each
27
-
-
(b) Capacity exceeding 501 litres but not exc 1000 litres each
15
-
-
Taking down carefully copper & aluminum point wiring for light, fan, socket or power complete and making good distrubuted surfaces of walls floors etc. Including switch & socket etc complete all as directed by EIC.
55
-
-
M & L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes( with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the following:-
-
-
-
One light/Fan point controlled by one way switch complete all as specified and directed by Eng-in-charge.
26
-
-
One 3 pin socket outlet 5 Amps on independent board complete all as specified and directed by Eng-in-charge.
10
-
-
One 3 pin socket outlet on same board complete all as specified and directed by Eng-in-charge.
6
-
-
One light point controlled by two way switch complete all as specified and directed by Eng-in-charge.
5
-
-
S & F in repair of modular switch single pole one way 6 Amps, ISI marked complete all as directed by EIC.
28
-
-
S & F in repair of modular Socket single pole one way 6 Amps, 2 module ISI marked complete all as directed by EIC.
16
-
-
S & F in repair of modular switch single pole two way 6 Amps, ISI marked complete all as directed by EIC.
10
-
-
S & F in repair White cover plate with frame, 2 module ISI marked complete all as directed by EIC
5
-
-
S & F in repair White cover plate with frame, 3 module ISI marked complete all as directed by EIC
10
-
-
S & F in repair White cover plate with frame, 6 module ISI marked complete all as directed by EIC
5
-
-
S & F in repair Metal flush box 3 module ISI marked complete all as directed by EIC
5
-
-
S & F in repair Metal flush box 6 module ISI marked complete all as directed by EIC
5
-
-
M & L for Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 4 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/ pressed steel sunken boxes with earth dolly duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets etc, including PVC insulated multi-stranded copper conductor 4 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent.
8
-
-
S & F in repair incl making existing surface good sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one single pole MCB 240 V grade 20 Amp.(AC Box) complete all as directed by EIC.
2
-
-
S & F of modular switch socket combination 16A (with gang box where is required), 6 pin, 3 module, ISI marked complete all as directed by EIC.
6
-
-
S & F in repair of switch piano type flush type single pole one way 5 Amps, ISI marked complete all as directed by EIC.
250
-
-
S & F in repair of socket outlet 5 pin flush 6 Amp multi pin 2/3 pin complete all as directed by EIC.
90
-
-
S & F in repair of switch socket combined outlet 6 pin flush 16 Amp multi, ISI marked complete all as directed by EIC.
70
-
-
S & F in repair of switch piano type/flush button type single pole two way 5 Amps front operated ISI marked complete all as directed by EIC.
5
-
-
S & F in repair of lamp holder , PVC/Poly carbonate type with back plate suitable for batten fittings complete all as directed by EIC.
10
-
-
S & F in repair of 3 pin plug top AC-230V, 6 Amp complete all as directed by EIC.
20
-
-
S & F in repair of 3 pin plug top AC-230V, 16 Amp complete all as directed by EIC.
40
-
-
S&F in repair ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and directed by Engr-in- charge.
10
-
-
S & F in repair of High lam sheet cover ISI marked with required Nos of space for switches/Sockets/Regulator of size 250x280mm complete all as directed by EIC.
5
-
-
S&F LED Building security light fitting 1x 25 W new generation energy saving and environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening seprate driver compartment with IP 66 protection and impact resistance of IK07 for mounting existing bracket complete including all accessories pre-wired with 3 X 1.5 sqmm single core mutistrand copper conductor cable up to celing rose/ terminal box and proper earthing connection must be provided, all as directed by EIC.
10
-
-
S & F G.I. pipe house service bracket hook type shall be fabricated with 1.2 m long screwed G.I. pipe of medium quality and will comprise of two No. 90 to 120 degree (as required) bends (pipe dia 40 mm) screwed tight to the top ends of the service vertical limb, the two ends of the service shall be provided with two Nos. of turned spit tight fit, well seasoned teakwood bushings and the bracket shall be fixed plumb vertical against the wall with two Nos. flat iron clamps, including all connected items, complete all as directed by EIC.
5
-
-
S & F in repair incl taking down of 15 W LED Recess mounted downlighter with pressure die-cast aluminium heat sink & PC diffuser in white powder coated finish with integrated driver complete all as directed by EIC.
4
-
-
Taking down existing U/S fittings any type any size and Supply & Fix LED 10 watt tube light fitting integrated type, (Length min 2 feet), 240 V, PF 0.90, colour temp 6500K, suitable for surface mounting on wall, multi stranded copper flexible cable 0.5 sqmm Two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as as directed by EIC.
70
-
-
S & F in repair incl taking down LED bulb 9 Watt with very high efficiency suited for installation in existing lamp holders, complete all as as directed by EIC.
50
-
-
S & F in repair 1 x 18 watt LED tube light fitting basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, LED Decorative luminaire with suitable for lamps LED Light high efficiency LED driver,Optimized heat dissipation for ensuring high LED life span AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose complete all as directed by EIC.
328
-
-
Taking down carefully aluminium sub main wiring from the existing casing/caping/PVC conduit all as diretced.
280
-
-
Material & Labour for sub main wiring with two run of 10 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 10 sqmm size PVC insulated unsheathed stranded copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge.
50
-
-
Material & Labour for sub main wiring with two run of 6 sqmm size PVC insulated multi stranded copper conductor FRLS cable (Nominal area) and one run of 6 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge.
100
-
-
Material & Labour for sub main wiring with two run of 4 sqmm size PVC insulated multi stranded copper conductor fire retardanr cable (Nominal area) and one run of 4 sqmm size PVC insulated unsheathed solid core copper conductor cable drawn in either existing or new surface/ recessed steel/ PVC conduit/ PVC casing capping of required size complete all as directed by Engr-in-charge.
130
-
-
Earthing complete with galvanised iron earth plate electrode 60cmx60cmx6mm thick , burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel wire 4 mm dia by means of galvanised nuts, bolts, check nuts and washers including excavation and earth work, PCC 1:3:6 type C-2 pit, PCC pit cover 1:2:4 type B-1 with handle, GI protection pipe 15 mm bore light grade and 20mm medium grade GI watering pipe, Funnel , wire mesh etc complete as shown in electrical Plate No.3 of SSR Part-I connected to earthing test point and metal part all as specified including testing on completion complete all as directed by EIC.
6
-
-
S&F sheet metal enclosure for VT DB TPN, MCCB DB TPN 4 way, with 200 A rated bus bar, double door with 100 Amp,25 KA,TP MCCB as incomer (Vertical type double door,100 Amps MCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43 including wooden rectangle board of first quality of suitable size for mounting of DB box with provision for 4 Pole MCCB* as incomer and SP/TP MCBsas outgoings complete all as directed by EIC:
2
-
-
S & F in repair of MCB TPN 40 to 63 Amps, 415 V with thimble suitable for existing wires complete all as directed by EIC.
5
-
-
S & F in repair incl taking down sheet metal enclosure for MCB DB, SPN 230 Volts 200 amps rated busbar 8 way double door complete all as directed by EIC.
2
-
-
S & F in repair of MCB single pole with neutral 240 volts 25 to 40 Amps with thimble suitable for existing wires complete all as directed by EIC.
2
-
-
S & F in repair of MCB single pole 6 to 32 Amps 240 V with thimble suitable for existing wires complete all as directed by EIC.
20
-
-
S & F 125 A MCCB 4 pole, 16 kA breaking capacity, 415 V with suitable thimbles all as directed by EIC
1
-
-
S & F in replacement ceiling mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed.
6
-
-
S & F in replacement Recess/ceiling mounting as suitable in existing fitting ultra slim 36 W LED 2x2 edge-lit tile in Aluminium Extruded housing with full opal diffuser suitable for perfect lighting conditions for most varied visual tasks in offices and general areas complete all as specified and directed.
4
-
-
S&F in replacement of new genration post top lanterns, IP-65 elegantly designed spun alumnium and high grade aluminium heat sink for efficient thermal management, sturdiness and excellent corrosion resistance. MS base provided to support the housing, environmental friendly long life high power LED light 25 watt complete all as directed by EIC .
4
-
-
Taking down ceiling fan/Exhaust fans/Wall mounting fan of any cap/sweep after disconnecting the electric supply from any site and opening fans for repair/over hauling including removing dust and greasing, and cleaning of blades and fan with kerosene oil and checking of alignment of shaft, oiling including re-assembling, nut bolt checking and connecting/refixing of fans in its original position burnt out fan shall be kept separately for rewinding complete all as directed by EIC.
NOTE:- Rewinding and replacement of defective parts shall be measured and paid seperately.
226
-
-
M&L for Rewinding ceiling fan of sweep 1200 mm/ 1400 mm with suitable gauge copper winding wire (super enamelled) including all insulating material after necessary heat varnishing testing etc. complete all as directed by EIC.
190
-
-
M&L for Rewinding Exhaust fan of sweep 250/ 300 mm with suitable gauge copper winding wire (super enamelled) including all insulating material after necessary heat varnishing testing etc. complete all as directed by EIC.
3
-
-
M&L for Rewinding Exhaust fan of sweep 380/ 450 mm with suitable gauge copper winding wire (super enamelled) including all insulating material after necessary heat varnishing testing etc. complete all as directed by EIC.
2
-
-
Note for Item No 173.00 to 175.00 and 10 (a) to (h)
1. Repairing/ rewinding of ceilling fan/ exhaust fan shall be carried out in the AGE E/M Dronachal subdivision in present of concern JE E/M.
2. Contractor shall detail the staff to collected defective fans from concern JE E/M, check the fans after opening it, and intimate the defects in the fan to JE E/M before carring out the repairs.
3. The bearing of fan should be of NBC/SKF make only. No other make will be accepted.
4. Contractor will be provided by stciker of each repairing fan with date and name of frms.
-
-
-
M & L for painting of following Item with two coats of DUCO paint (ISI grade) white using spray machine spray painting including cleaning, washing and preparation of old painted surfaces including MES Nos are Entered in all ceiling and Exhaust fan in site only, complete all as directed by Engr-in-Charge:-
Note:- (painting shall be carried out in E/M Yard)
-
-
-
Ceiling fan of 1200/1400 mm sweep complete.
15
-
-
Exhaust fan of 300/380/450 mm sweep with smoke grey.
5
-
-
Geyser 25 liter cap.
2
-
-
S & F in repair metal fan blade of any type and any size suitable for 1200 mm/ 1400 mm Ceiling fan complete all as specified and directed by Engineer-in-Charge.
3
-
-
S & F in repair metal fan blade 250/ 300/450 mm sweep of any type and any size suitable for exhaust fan of any capacity, of any make, complete all as specified and directed by Engineer-in-Charge.
2
-
-
S & F ceiling fan regulator stepped type ISI marked, complete all as specified and directed by Engr-in-charge
25
-
-
S & F ceilling Fan down rod of size 15 mm GI pipe medium grade(ISI mark) length upto 50cm including making holes, nut bolts, spilit pin washers etc complete all as directed by EIC.
4
-
-
Taking out and replacement of following accessories form ceiling fans taking down vide item No 3 here in before complete all as directed by EIC.
-
-
-
Bearing No 6201
193
-
-
Bearing No 6202
195
-
-
Bearing No 6203
2
-
-
Rubber Bush , nut, bolts ,washer and split pin etc as reqd at site suitable for ceiling fan
50
-
-
Condenser 2.5 mfd
193
-
-
Condenser 4 mfd
2
-
-
Ceiling fan shaft
20
-
-
Ceiling fan clamps
20
-
-
S&F ceiling fan canopy for suitable of 1200/1400 mm sweep complete
10
-
-
M&L for Fixing of Geyser in existing or new position by providing suitable size of anchor fastner and connecting PVC flexible inlet and outlet pipe complete all as directed by EIC.
5
-
-
M&L for repairs to defective/leakage of geyser 25/50 ltr capacity inner tank of copper/Steel by brazing, soldering, gas welding including testing for leak proof upto the satisfaction of the EIC complete all as directed by EIC.
5
-
-
S&F Gun metal half turn UPVC gate valve of 25mm dia and fixed in position after taking out unserviceable gate valve complete all as directed by EIC.
2
-
-
S&F Gun metal half turn UPVC gate valve of 20mm dia and fixed in position after taking out unserviceable gate valve complete all as directed by EIC.
2
-
-
Taking down and dismantling the outer cover of geyser of any capacity and removing the scaling including repairing and replacement of the inlet and out let pipe and re-assembling the same after testing complete all as directed by EIC.
4
-
-
Taking out and repalcement of following unserviceable parts of Geyser :-
-
-
-
Inner tank stainless steel 25 ltrs cap ISI marked
1
-
-
Thermostat ISI marked
10
-
-
Triangle Heating element 1.5 KW/2 KW, ISI marked
10
-
-
Indicator lamp with flexibe copper wire of suitable size Red/Green
8
-
-
PVC Connection with steel reinforced pipe for hot water connection of Size 18" x 1/2"
5
-
-
S & F PVC insulated multi stranded Copper conductor, sheathed round cable ISI marked 1.5 sqmm x 3 core complete all as directed by EIC.
30
-
-
Replacement of burning wire of any size out of any type of existing TPN/SPN DBs including replacement of damaged PVC conduit with cement work complete .Note: Wire, PVC conduit and cement work includeed in quoted rate.
2
-
-
M & L for sheet metal enclosure with socket and plug top single pole & neutral with a two pin & earth plug & socket complete with one MCB SP 20 amps, 240 volts complete all as directed by EIC.
5
-
-
Material & Labour for sub main wiring with two run of PVC insulated multi stranded copper conductor fire retardant cable 4 sqmm size (Nominal area) and one run of PVC insulated unsheathed solid core copper conductor cable 4 sqmm size in including PVC casing capping flat pipe of required size complete all as directed.
70
-
-
S & F Stator for Ceiling Fan 1200/1400 mm sweep complete all as directed by EIC.
5
-
-
S & F rotor for Ceiling Fan 1200/1400 mm sweep complete all as directed by EIC.
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements