Military Engineer Services Tender
Know all about the latest MP tenders along with the tender details and downloadable document on BidAssist. Here, on this page, we shall help you search for every MPtender posted on the official website of mptenders.gov.in according to authority, district, etc. Be it an irrigation tender or MP PWD tender, and we will tell you how to bid for these and more.
Military Engineer Services - MES Tender
Coronavirus COVID 19
Eprocure
Opening Date30 Nov 2019
Closing Date31 Dec 2019
Tender Amount₹ 32,30,061
Costs
EMD
₹ 62,600Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_MES_301954_1Bid Award Id
ViewTender No
8220/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfaces to match with the existing surfaces
10
-
-
M&L for the following point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS), with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS) stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS/POLYCAB & Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling
-
-
-
-ditto- all as per item No 5 above but One light point controlled by one way switch
112
-
-
-ditto- all as per item No 5 above but One ceiling /exhaust fan point controlled by one switch and regulator
25
-
-
-ditto- all as per item No 5 above but One 3 pin 5 amp socket out point on the same board with other switches.
30
-
-
-ditto- all as per item No 5 above but One 3 pin 5 amps socket out let point on independent board
40
-
-
-ditto- all as per item No 5 above but One bell/buzzer point controlled by one bell push.
10
-
-
-ditto- all as per item No 5 above but One light point controlled by two 2-way switches
2
-
-
-ditto- all as per item No 5 above but for one socket outlet 15 Amp on independent board with 2.5Sqmm (FRLS) cable and 1.5 Sqmm (FRLS) earth wire.
50
-
-
S&F Switch piano flush button type two ways 5 Amps. Make : Havells/ Standard/ Anchor/ Leader
4
-
-
S&F Switch piano flush type single pole one way 5 amps. Make : Havells/Standard/ Anchor/ Leader
167
-
-
S&F Socket out let 2 in one, 5/3 pin 5 Amp. Make : Havells/Standard/Anchor/Leader
64
-
-
S&F Switch socket combination 5 Amps 5 pin flush type Make : Havells/Standard/Anchor/Leader
96
-
-
S&F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal. Make : Havells/Standard/Anchor/Leader
50
-
-
S&F Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified Make : Havells/Standard/Anchor/Leader
137
-
-
S&F Call bell AC-230 Volt single pole ding dong Make : Havells/Standard/Anchor/Leader
16
-
-
S &F Bell push, flush type 5 Amps. Make : Havells/Standard/Anchor/Leader
16
-
-
S&F regulator electronic step type 100/120 watt 5 step complete all as specified and directed Make : Havells/Standard/Anchor/Leader
25
-
-
S&F Lamp holder insulated body with back plate for angle holder all as per specified Make : Havells/Standard/Anchor/Leader
10
-
-
S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack, 1x20 Watt, 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc.with all accessories internal prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos. make- Bajaj/Crompton /Havells/Wipro
90
-
-
Supply and fix LED security light fitting of 45 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make CROMPTON / Wipro/Philips/Havells
12
-
-
S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 25 amp, flush mounting type LEGRAND/ABB/L&T
10
-
-
Supply only 15 A swich socket combination
20
-
-
Supply only 5 A swich socket combination
20
-
-
Supply only MCB TPN 63 Amps of make Legrand/L&T/siemence
10
-
-
Supply only MCB 40 Amps SPN make Legrand/L&T/siemence
10
-
-
Supply only MCB 32 Amps SPN make Legrand/L&T/siemence
10
-
-
Supply only MCB 16 Amps SPN make Legrand/L&T/siemence
10
-
-
Supply only MCB 10 Amps SP make Legrand/L&T/siemence
10
-
-
Supply only LED 18/20 Watt complete fitting of glass reflector including battan with LED tube of make Bajaj/Phillips/Crompton
200
-
-
Supply Only 5 Amps socket 3 Pin
50
-
-
Supply Only 5 Amps Switch flush type single pole
50
-
-
Supply only 2.5 sqmm cross sectonal area multistraned copper wire
90
-
-
Supply only 4 sqmm cross sectonal area multistraned copper wire
90
-
-
Supply only service cable aluminum conductor of size 10 sq mm, 2 core
90
-
-
Supply only 9 Watt LED Bulb make Bajaj/Phillips/Crompton
120
-
-
Supply only 12 Watt LED Bulb make Bajaj/Phillips/Crompton
50
-
-
Supply only 15 Watt LED Bulb make Bajaj/Phillips/Crompton
50
-
-
Supply only Geyser heating element trangular typs 2 KW make toshiba/crompton/bajaj
5
-
-
Supply only Geyser heating element trangular type 1.5KW make toshiba/crompton/bajaj
5
-
-
Supply only insulation tap black colour 3 mtr roll 1 cm wide
50
-
-
Supply only fan regulator of 100/120 Watt
50
-
-
Supply only ding dong call bell
30
-
-
Supply only Bamboo ladder 20 feet height
1
-
-
Supply only aluminium ladder 08 feet height of weight not less than 25 Kg of precribed standred.
1
-
-
Supply only ceiling fans 5 STAR RATING complete including down rod, Electronic regulator 100/120 Watt step type and accessories, AC single phase 230/240 Volt of size 1200 mm sweep white colour of aluminium material complete all as specified. Make : Bajaj/ Havels/ Crompton
50
-
-
S&F in repairs Closed Stationary Storage type water heater geyser, 5 star rating, operating on 230 volt AC, inner tank made out of mild steel,outer body made out of PVC ,coil wattage 2000 W , of capacity 25 lit ,including earth leakage circuit breaker, nut bolt & washer , make HAVELLS /Racold/Crompton. Old geyser shall be deposited in CDA office Store.
5
-
-
M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm (FRLS), earth continuity conductor of size 2.5 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors including Taking down old sub main wiring with conduit of any size/capacity including conduit and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 2.5 sqmm & PVC conduit shall be measured as one unit.
90
-
-
M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm (FRLS), earth continuity conductor of size 4 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 25 mm dia with fittings (ISI marked) fixed on walls/roof/floors including Taking down old sub main wiring with conduit of any size/capacity including conduit and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 4 sqmm & PVC conduit shall be measured as one unit.
90
-
-
M&L in repairs for Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 10 Sqmm (FRLS), earth continuity conductor of size 6 Sqmm (FRLS) to be drawn through in and including non metallic PVC conduit medium grade 32 mm dia with fittings (ISI marked) on walls/roof/floors all as directed by Engineer in Charge.Notes:- (i)Two wires of 10sqmm and one wire of 6 sqmm & PVC conduit shall be measured as one unit.
50
-
-
M&L in repairs for aluminum conductor service cable of size 10 sqmm, 2 core for single phase connection with proper clamping to walls/floors/roof all directed by Engr-in-Charge
180
-
-
M&L in repairs for aluminum conductor service cable of size 16 sqmm, 2 core for single phase connection with proper clamping to walls/floors/roof all directed by Engr-in-Charge
180
-
-
M&L in repairs for aluminum conductor service cable of size 10 sqmm, 4core for three phase connection with proper clamping to walls/floors/roof all directed by Engr-in-Charge
90
-
-
M&L in repairs for aluminum conductor service cable of size 16 sqmm, 4 core for three phase connection with proper clamping to walls/floors/roof all directed by Engr-in-Charge
90
-
-
S&F in repairs MCB DB made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 ways Double door, Make -L&T/LEGRAND/SCHNEIDER
5
-
-
S&F in repairs MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 4 ways Double door IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER
6
-
-
S&F in repairs MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail ,230 Volts SPN with 8 ways Double door , IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER
8
-
-
S&F in repairs MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 12 ways Double door IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER
10
-
-
NOTE FOR ITEM Nos 51 to 54 -(i).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall/DB to be fixed on wall including frame made out of MS flat 40x5mm (ii).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface. (iii) MAKE OF DB & MCB L&T/LEGRAND/ SCHNEIDER
-
-
-
S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER
5
-
-
S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER
14
-
-
S&F in repairs MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified Make -L&T/LEGRAND/SCHNEIDER
220
-
-
M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)
2
-
-
Taking down and dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400/1500mm sweep fan all as specified :- (i) Split pin - 02 Nos
(ii) Connection block - 1 No
(iii) Insulation rubber bush. - 01 No
100
-
-
Fixing or hanging only ceiling fan after winding fan under item No. 59 above and connecting up including provision of 3 core 1.5 Sqmm copper cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed
100
-
-
All as pr item No. 59 here-in-above but exhaust fan of size 225mm to 450mm sweep (except rubber roll, split pin)
10
-
-
Fixing only Exhaust fan after winding fan under item No. 61 above and connecting up including provision of 3 core 1.5 Sqmm copper cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed
10
-
-
All as per item No. 59 here-in-above but wall fan of size 600 mm to 750mm sweep (except rubber roll, split pin)
10
-
-
Fixing only wall fan after winding fan under item No. 63 above and connecting up including provision of 3 core 1.5 Sqmm copper cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed
10
-
-
Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down.(Note- (A) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (B) The spares required shall be measured and paid separately in the relevant items).
200
-
-
S&F in repairs connecting up flexible copper wire twin core of 23/.0078 complete all as specified.
150
-
-
Supply only gun metal bush of any size (Make - MSP).
100
-
-
Supply only bearing for ceiling fan (Make - TATA/SKF No.6201/6202).
100
-
-
Supply only bearing for ceiling fan (Make - TATA/SKF No.6203/6204).
100
-
-
Supply only fan condensor 2.5 MFD (Make – USHA / UNIVERSAL).
150
-
-
Supply only fan condensor 4 MFD (Make – USHA / UNIVERSAL).
5
-
-
Supply only split pin as per existing specification/size.
300
-
-
S&F canopy of ceiling fan bottom and upper side of size 1200/1400/1500mm Make :- Usha / Orient / Keasal / Himadri / Thermacool / Jetairway
10
-
-
M&L for Painting of ceiling fan 1200/1400 mm sweep complete including fan blades down rod with one coat of synthetic enamelled paint of white tint on old surface including cleaning and removing dust and dirt and making smooth surface for painting including writing MES No complete all as specified.
300
-
-
S&F in repairs fan blade made out of aluminium alloy suitable for wall mounting fan of sizx 300 to 450 mm as per existing size/specification
10
-
-
S&F in repairs GI tubing 'light grade' 20 mm bore use as down rod of ceiling fan ,cut to required length & incl. drilling of hole at both side. Make TATA/JINDAL/OSWAL
50
-
-
S&F in repairs GI tubing 'light grade' 15 mm bore use as down rod of ceiling fan ,cut to required length & incl. drilling of hole at both side. Make TATA/JINDAL/OSWAL
50
-
-
S & F in repairs Mild steel work in framed work such as Fan hooks, Clamps, gratings, ladders etc., with ends of bars welded and/ or riveted, or forged and similar work confirming to Fe 410 - O or Fe 310 - O and incl painting to surfaces using two coats of metallic primer and a coat of synthetic enamelled paint of desired colour as directed.
50
-
-
Supply & Fix in repairs LED tube rod of 18/20 Watt with glass reflector make of bajaj / crompton / SYSKA / Wipro
400
-
-
Supply & Fix LED in repairs Batten suitable for 18/20 Watt LED tube make of bajaj / crompton / SYSKA / Wipro
400
-
-
S&F MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 ways, Double door complete all as specified
6
-
-
S&F MCCB TPN 63 Amps , 415Volts, 25KA ,4 POLE complete all as specified
3
-
-
S&F MCCB TPN 100 Amps , 415Volts, 25KA ,4 POLE complete all as specified
2
-
-
S&F MCCB TPN 160 Amps , 415Volts, 25KA ,4 POLE complete all as specified
2
-
-
Taking down of MCCB, MCB TPN and MCCB DB all as specified and directed by Engr-in-Charge.
42
-
-
S&F MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps complete all as specified.
10
-
-
S&F in repairs Fabricate GI pipe bracket 40mm bore 'light grade' 1.2m long & 2 set of clamps made out of 40x6mm ms flat & fixed with anchor bolt suitable for 45 w ssecurity light fitting with two coat of enamelled paint complete all as specified.
12
-
-
M&L for run lead joints for the following size of pipes complete for water mains with spigot & socket pipes and fittings complete all as specified and directed:-
-
-
-
150 mm bore
6
-
-
100 mm bore
3
-
-
80 mm bore
2
-
-
S&F rubber gasket joint for flanged end pipe & fittings of following size :
-
-
-
150 mm bore
12
-
-
100 mm bore
2
-
-
80 mm bore
2
-
-
S&F machanical Gypsum joint ISI marked for spigot end pipe of following sizes:-
-
-
-
150 mm bore
6
-
-
100 mm bore
5
-
-
80 mm bore
4
-
-
S&F 80 to 300mm bore spigot/flanged/ socketed CI fittings. such as bends (any type radius and angle), apers, tees, collars & tail piece socket/flanged/spigot etc complete all as specified.
100
-
-
Dismantling/taking out unserviceable sluice valve of size 80mm to 300mm bore dia by opening/cutting rusted nuts, bolts etc all as specified and directed.
10
-
-
S&F the following CI sluice valves both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.0 ISI marked complete all as specified and directed:- Make : Kirloskar/L&T/Upadhiya
-
-
-
80 mm bore
1
-
-
100 mm bore
1
-
-
S&F the following CI sluice valves both ends flanged and drilled, bonnet wedge stuffing box. Gland trust plate, hand wheel made out of grey CI, complete valve confirming to IS 14846/2000 and its fittings suitable for hydraulic test pressure of 15 Kg/sqcm PN 1.6 ISI marked complete all as specified and directed:- Make : Kirloskar/L&T/Upadhiya
-
-
-
150 mm bore
6
-
-
200 mm bore
2
-
-
Cutting of road /hard standing for laying /dismentling of pipe line and making good surfaces matching with the existing surface after laying of pipe line.up to 30 cm
80
-
-
Taking up or down the following old unserviceable GI Tubing and connections including cleaning for refixing:- Note :- Excavation/earthwork shall be measured & paid separately.
-
-
-
15 mm bore
110
-
-
20 mm bore
290
-
-
25 mm bore
190
-
-
40 mm bore
190
-
-
50 mm bore
170
-
-
Refixing the following old GI Tubing and connections in New or old position (walls, Ceiling, Floors etc) of sizes:-
-
-
-
15 mm bore
40
-
-
20 mm bore
20
-
-
25 mm bore
20
-
-
40 mm bre
20
-
-
Laying only the followiing old serviceable removed GI Tubing from site and connection in New or old position (in trenches) of sizes :-
-
-
-
20 mm bore
20
-
-
25 mm bore
20
-
-
40 mm bore
20
-
-
50 mm bore
20
-
-
S&F the followiing GI tubing medium grade with all fittings and fixed complete laid in trenches of size :-
-
-
-
20 mm bore
100
-
-
25 mm bore
100
-
-
40 mm bore
100
-
-
50 mm bore
150
-
-
S&F the followiing GI tubing medium grade with all fittings complete to walls and ceilings or laid in floors of size :
-
-
-
15 mm bore
70
-
-
20 mm bore
150
-
-
25 mm bore
50
-
-
40 mm bore
50
-
-
Taking down/removing the following Unserviceable Gate valve/stop valve from water supply lines, closing the opening with plug or preparing for new as required necessary fittings complete all as specified.
-
-
-
20 mm bore
75
-
-
25 mm bore
50
-
-
40 mm bore
15
-
-
50 mm bore
35
-
-
S&F the followiing Gun metal Globe or Gate valve with iron wheel head, screwed both ends for iron pipe and fixed with required necessary GI fittings complete :- Make : Kartar/Zolto/Sant/Leader
-
-
-
20 mm bore
75
-
-
25 mm bore
50
-
-
40 mm bore
15
-
-
50 mm bore
35
-
-
Cutting the following existing galvanised iron pipe in position for insertion of new pipe/tees, branches etc.
-
-
-
15 mm bore
6
-
-
20 mm bore
6
-
-
25 mm bore
6
-
-
40 mm bore
6
-
-
50 mm bore
6
-
-
80 mm bore
4
-
-
100 mm bore
4
-
-
Taking up Submersible Pump assembly including column pipe approx 50 to70 mtrs using chain pulley block manually and carrying out following phase of work all as directed for 17.5HP/15 HP Pump Set .(i) Transportation of submersible pump -motor assembly for necessary repair. (ii) Carrying out overhauling of motor assembly 3phase ,taking out burnt winding wire, with & including PVC insulated water proof copper wire with winding wire of appropriate gauge and turn, providing insulation materials and replacement of bearing and assembling with repaired/serviceable pump and testing complete all as directed by Eng-in Charge. (iii) Carrying out dismantling and overhauling of multi stage pump, incl cleaning and derusting of casing, replacement of worm out spare like bearings, impellar bushing, coupling etc & refixing of existing serviceable components after proper cleaning, machining all as required & assembling testing at workshop complete for 17.5/15 HP submersible pump of any make including carrying out painting by two coats of synthetic enamelled paint over a coat of primer,assembling the pump and motor including testing complete all as specified and directed. Note : Spare parts shall eb measured and paid separately as supply only
2
-
-
Supply only Adopter
2
-
-
Supply only Balancing Ring
2
-
-
Supply only Base plate
2
-
-
Supply only stud
2
-
-
Supply only Bearing Bush
2
-
-
Supply only Bearing housing lower
2
-
-
Supply only Bearing housing upper
2
-
-
Supply only Bearing housing lower open type
2
-
-
Supply only Bearing housing upper open type
2
-
-
Supply only CI Bearing
2
-
-
Supply only coupling
2
-
-
Supply only coupling key
2
-
-
Supply only Drain plug
2
-
-
Supply only Flange lower
2
-
-
Supply only Flange upper
2
-
-
Supply only Flange lower stud
2
-
-
Supply only Flange upper stud
2
-
-
Supply only Gronmet
2
-
-
Supply only motor Base
2
-
-
Supply only MS washer
2
-
-
Supply only Ny lock nut
2
-
-
Supply only Plug washer
2
-
-
Supply only Pressure cup Equeliser
2
-
-
Supply only RT disc
2
-
-
Supply only Rocker
2
-
-
Supply only Rotor clip
2
-
-
Supply only Rotor Dowl pin
2
-
-
Supply only Rotor nut
2
-
-
Supply only Rotor sleev
2
-
-
Supply only Stand guard
2
-
-
Supply only Stater circlip
2
-
-
Supply only stud O ring
2
-
-
Supply only TB axel
2
-
-
Supply only T bolt
2
-
-
Supply only T bolt housing
2
-
-
Supply only water seal
2
-
-
Supply only water seal O ring
2
-
-
M&L for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations as directed by engr-in-charge.Make:Atlas/BWC/Swastik/Chetak
120
-
-
S&F in replacement the following stainless steel spindle suitable for following dia of sluice valve complete with stainless steel nut and threading as per sample & directed by engr-in- charge
-
-
-
150 mm bore sluice valve
6
-
-
100 mm bore sluice valve
5
-
-
80 mm bore sluice valve
1
-
-
Supply and install Submersible pump set suitable for 200 mm dia bore tube well with submersible pump and motor, water lubricated electric driven, 3 phase, 415 volts, 50 Hz AC supply, up to 87 Mtr head and discharge 480 LPM (Approx) of suitable 15 HP, lowering, commissioning and testing complete all as specified. Note :- Old pump set shall be deposted to CDA
1
-
-
Supply, testing connecting & jointing in repairs PVC insulated, PVC Sheathed submersible flexible cable of size of 10 Sqmm 3 core standard copper conductor 1100 Volt grade including water proof jointing for making connections to water pump and starter complete all as specified and directed
480
-
-
Supply and lay in repairs 80 mm bore GI column pipe heavy grade ISI marked in standard length of 3 meter each duly threaded with both ends with and including long threaded heavy duty socket and fittings and lowering into well including supplying, lowering ,fixing, commissioning & testing complete all as specified and directed
50
-
-
Supply and fix in repairs CI non return valve with by pass arrangement of size 150 mm dia complete all as specified.
2
-
-
M&L in repairs Fully Automatic Star Delta Motor starter 15 HP in sheet-steel enclosure type MK-1 .feature (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 11-18 complete all as specified. (Make : L&T cat no SS 96257 or Equivalent OF SIEMENS/schneider)
5
-
-
Comprehensive maintenance for 320 KVA DG set of CDA including preventive maintenance checks at least once in a month, checking up of engine and alternator for trouble free functioning and attending break downs/ complaints as and when required. The type of work / maintenance services shall be carried out during comprehensive maintenance are as under :-
9
-
-
a) Checking of Engine Oil level.
-
-
-
b) Checking of oil bath cleaner oil level.
-
-
-
c) Drain sediments from fuel tank.
-
-
-
d) Checking of pre- cleaner dust pan.
-
-
-
e) Checking of air cleaner restriction.
-
-
-
f) Checking of coolant level.
-
-
-
g) Record Oil pressure..
-
-
-
h) Checking /tightenig of all bolts / nuts of engine and alternator.
-
-
-
i) Checking of Engine Oil level.
-
-
-
j) Checking of AVM pads.
-
-
-
k) Checking of diaphragm coupling..
-
-
-
l) Checking of tappet clearance.
-
-
-
m) Clean fuel tank breather .
-
-
-
n) Clean crank case breather .
-
-
-
o) Checking of Air piping.
-
-
-
p) Cleaning of oil bath Air cleaner Tray screen.
-
-
-
q) Check / adjust Belts.
-
-
-
r) Checking battery voltage, water level and apply jelly on terminals.
-
-
-
s) Checking fan hub / air blower hub and water pump.
-
-
-
t) Cleaning turbo charger.
-
-
-
u) Tighten manifold Nuts of cops screws.
-
-
-
v) Cleaning of electrical connections with CTC solution.
-
-
-
w) Checking of safety contols
-
-
-
x) Cleaning of cooling system / radiator assembly.
-
-
-
y) Cleaning of Engine and radiator assy.
-
-
-
S&F in repairs set of fuel pre-filters and fine -filters as per sample and make for 01 x 320 KVA DG set. Each set shall be comprising complete set of pre/fine filters. Make Kirloskar
4
-
-
S&F in repairs set of lube / engine oil filters / catridges as per sample and for 01 x 320 KVA DG set. Each set shall be comprising complete set of pre/fine filters. Make Kirloskar
2
-
-
S&F in repairs set of Air filters and fine -filters as per sample and for 01 x 320 KVA DG set. Each set shall be comprising complete set of pre/fine filters. Make Kirloskar
1
-
-
S&F in repairs set of Operating filters and fine -filters as per sample and for 01 x 320 KVA DG set. Each set shall be comprising complete set of pre/fine. Make Kirloskar
1
-
-
Supply and fix in replacement Coolant suitable for 320KVA Gen Set
30
-
-
S&F in repairs Battery lead with stranded copper conductor of size 95 /70sqmm single core PVC insulated, flexible.
4
-
-
S&F in repairs V- belt for fan A 56/A55/B47.
1
-
-
S&F in repairs stopping solenoid coil 12V for 320KVA DG set.
1
-
-
S&F in repairs off solenoid coil 12V for 320 KVA push on type ( for double Tank DG set).
1
-
-
S&F in repairs battery terminals of copper.
4
-
-
S&F in repairs governar cord
1
-
-
S&F in repairs fuel pipe filter to FIP wire braided.
2
-
-
S&F in repairs fuel pipe (rubber pipe ) upto 15 mm size from fuel tank to the DG set & over flow return .
10
-
-
S & filling in replacement Engine oil. Make Castrol/Indian Oil/Servo
300
-
-
S&F in repairs carbon brush suitable for 320KVA Gen Set .
2
-
-
S&F in repairs gate valve 15 mm bore cast copper alloy for the fuel tank out let.
1
-
-
S&F in repairs Water outlet and inlet hose pipe from radiator to Engine and back Engine to radiator .
1
-
-
S&F in repairs Lub oil pipe.
1
-
-
S&F in repairs Water separator
1
-
-
S&F in repairs DC ameter 12 V of range (-) 30- 0- (+)30 A .
1
-
-
S&F in repairs Lub oil pressure guage 0 to 10 kg / sq cm.
1
-
-
S&F in repairs Maintenance free power pack unit 24 Volt,diamension-430x255x235 suiable for generating set 160 KVA to 500KVA,CAT NO-XCL/24/3200 MODEL X-CELL OF make HBL POWER SYSTEM LIMIED
1
-
-
Repairing the self starter of Mico make after removing from the Gen set of capacity 320 KVA and transporting to an authorised sevice centre and vice versa complete all as specified (Note- Replacement of the following spare parts shall be measured and paid separately under relevant items. Make/size/specification of spare parts as per existing and cost of fixing of spare parts shall be included in the Item No 135) :-
1
-
-
-Ditto- all as per item No 135 above but supply only Armature
1
-
-
-Ditto- all as per item No 135 above but supply only Bendex of suitable size
1
-
-
-Ditto- all as per item No 135 above but supply only Bearing / bushes
1
-
-
-Ditto- all as per item No 135 above but supply only Relay switch of suitable size
1
-
-
Drain the out lived engine oil, clean the oil sump and filling the engine oil all as directed.
300
-
-
S&F in repairs Providing aluminium cladding to the exhaust pipe and silencer of the DG sets of any capacity by engaging highly skilled technicians after removing the existing totally worn out asbestos rope ( wherever available) and prepairing the surface , applying one coat of red oxide primer and including 50mm thick high quality glass wool thermal insulator packing which is bidinding tightly with chicken wiremesh of approved quality to the exhaust pipe and neatly finishing sealing with 24 SWG aluminium sheet all as directed by engr -in- charge.
45
-
-
Opening the coupling , dismantling the alternator carefully removing the fly wheel dismantling the unserviceable starting gear wheel ,including minor repairs & cutting of winding, welding ( if required) & transporting to Authorised service center and vice versa fixing back the alternator after repair and properly coupled back all as directed 320 KVA Gen Set complete.including installation, testing & commissioning after repair
1
-
-
Material & labour for Rewinding the ALTERNATOR (stater & roter) with super enamelled copper winding wire with appropriate same gauge of exsisting coil with similar class of exsisting insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations as directed by engr -in - charge
210
-
-
S&F in repairs BATTARY 12 VOLT 180 AH
2
-
-
S&F in repairs Automatic voltage regulator complete with diod Electronic static type suitable for DG Set of 320 kVA 3 Phase 415 Volts.
1
-
-
S&F in repairs Electonic governar suitable for DG Set of 250/320 kVA 3 Phase 415 Volts.
1
-
-
Operation and routine/Daily maintenance of DG 320 KVA installation (CDA MAIN BUILDING) with deputing of one skilled FGM operator for ONE shift of 08 hours each shift for 8 hours daily EXcluding Sunday and holidays for operation o fDG sets, PANNELS for proper running (1) DG sets 320 KVA- 01No , (2) control panel boards of DG sets and operating PANNELS. Note :- If quoted rates are less than minimum fair wages inclusive of GST, EPF, ESIC as applicable the bid shall be treated as non-bonafide and will be rejected. No objection/claim in this regard will be accepted.
240
-
-
Notes for item No – 143 as follows:-
To maintain log sheet and log books for all plants and monthly duty roaster for duty staff.
-
-
-
POL shall be arranged by the Engr-in-Charge as per requirement and issued to contractor on schedule B free of cost for bonafide Government use only & a pucca bound register shall be maintained showing day to day input/output only signed by JE/Engineer-in-charge/Contractor.
-
-
-
The unit per day means 8 hours. The contractor shall deployed one FGM per shift of 08 hours at installation
-
-
-
It is the responsible of AGE/JE to ensure that attendance register is maintained at all the installation duly signed kept on record and payment of trade man for the Nos of days present will only be made, Engineer-in-Charge will be responsible for payment of trademan in his presence. Contractor shall provide proper dress to tradesmen as approved by Eng-in-Charge and during duty hours all tradesmen shall be in proper uniform otherwise necessary recovery @ double the quoted rate for per shift shall be made from his dues.
-
-
-
In case the contractor does not operate the DG set for a day or part thereof due to any reason whatsoever double of the quoted rate to each shift will be recovered.
-
-
-
The quoted rate is deemed to include for all surrounding premises cleaning such as in side the DG Set, outside, toilet including cutting of grass shrubs etc and always keep ready position whenever any visiting officer visits the site the DG Set room should be cleaned and neat in all respect. In case any bad/adverse remark given by any visiting officer at any time the necessary recovery @ double the rate quoted per remark per day will be charged from the contractor as certified by Engineer-in-Charge and no claim whatsoever is admissible on the account, GE’s decision is final and binding on this account.
-
-
-
Trades man should be wear always Operators uniform and take preventive /safety measures and will use protective clothing as per code of IE rules. Department will not responsible for any type of incident.
-
-
-
Contractor shall be made security pass for all operators and maintain proper register duly signed by all concerned.
-
-
-
T&P like spanners, screw drivers, pipe wrench, torch light, other items required for repair etc. will be provided by the contractor.
-
-
-
Leave of deployed person in inescapable cases shall be allowed on prior intimation but Contractor on demand of Engineer-in-Charge, shall arrange alternate arrangment. Payment shall not be allowed for leave period.
-
-
-
In no case wages of deployed persons shall be less than the Minimum wages fixed by Govt Competent Authority. It is mandatory requirement for Contractor that payment of deployed person shall be made through Cheque/RTGS/Acceptable Electronic Mode only. Proof of payment shall be submitted by Contractor to Engineer in Charge monthaly basis or during claiming on account of Advance (RAR)/FB.
-
-
-
The Employees Provident Funds & Miscellaneous Provisions (EPF & MP) Act, 1952. shall be strictly adhered to by the Contractor. Social Security to workers i.e. EPF, ESIC, Personal Insurance(if applicable) on part of Employer shall be paid by Contractor and accordingly, Contractor/Bidder shall include all these factors in his quoted rate.
-
-
-
Statuatory levies/GST if applicable on part of contracts shall be paid by Contractor and accordingly, Contractor/Bidder shall include all these factors in his quoted rate.
-
-
-
Deployed person shall report daily to JE/Engineer in charge or nominated officers by Accepting Officer for their attendence & obtain instructions. An attendence register shall be maintained by Contractor on site shall be certified by MES rep every day.
-
-
-
An uniform of blue shirt/jersy duly embossed "MES OUTSOURCING SERVICES" at back and name plate of the person on front left shall be provided by contractor to all workers at his own cost.
-
-
-
Documentation - Attendance register & wages register,Daily work register as per the format provided by the Deptt. shall be prepared & maintained at his own cost.
-
-
-
Dismantling carefully the existing U/S LT Overhead line ACSR conductor of any size from its position by necessary disconnecting of conductor complete all as specified and directed by Engr-in-Charge.
1
-
-
Supply and stringing, stretching and fixing ACSR conductor for over head line securing on pole complete including binding wire ,jointing sleeves aluminium tap and PG clamp etc of any size all as specified and as directed.
0.5
-
-
Fixing only/stringing only old dismantled ACSR conductor for over head line securing on pole complete including binding wire, etc of any size complete all as specified and as directed.
0.5
-
-
Note for item 145 & 146 Jumper on cut point/2 pole structure/4 pole structure shall be provided with PVC insulated sleeves. Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.
-
-
-
Removing /opening of binding from shackle/pin insulator and restringing of single conductor, tightening of LT over head ACSR /copper conductor any size including binding with copper /aluminium binding wire to over head conductor including renewal of jumpers complete all as specified Note:- Rates shall be included of jumper and tree branch cutting to make safe distance from pole /OH line.
300
-
-
Dismantling existing u/s guard wire with cradles of any size from LT OH line and removing from site of work complete all as directed by Engr-in-Charge.
0.3
-
-
S&F GI steel continuous earth wire & cradle 4mm dia on cross arms of poles for guarding including binding with aluminum wire 16 SWG etc. complete all as specified and directed by Engr-in-Charge.
0.3
-
-
Dismantling of U/S insulators of any size and type complete from its position and removing all as directed by Engr-in-Charge.
15
-
-
Fixing only old LT pin type insulator obtained from item No 150 above.
2
-
-
Fixing only old LT shackle type insulator obtained from item No. 150 above
2
-
-
S&F pin type, porcelain virteous, white, brown or green insulator 100mm height, 65mm dia for 1100 Volts grade, including one GI MS spindle, two GI washers, one GI nut complete all as specified and directed by Engr-in-charge.
5
-
-
S&F LT shackle type, porcelain virteous White, Brown or Green insulator 90mm dia, 75mm height, including GI MS straps of Size 31 x 3 mm washers, 12mm dia, bolts suitable for 1100 volts grade complete all as specified and directed.
5
-
-
Dismantling of u/s stay assembly carefully including stay wire necessary excavation and earth work in any type of soil, demolition of PCC of any type and removing rubbish to as distance n. exc 50m at low lying area complete all as specified.
1
-
-
S&F stay assembly complete with accessories and stay rod 16mm dia and 180 cm long, including ms galvanized stay plate 300 mm x300 mmx6mm and galvanized thimble complete all as specified and shown in electrical plate No 1. of SSR 2009 ( Part-I ) Note:- (loop type insulator, stays clamps, excavation and earth work and concrete shall be measured and paid separately)
1
-
-
S&F loop type insulator porcelain virteous, White, Brown or Green & with over all dimension 65 x 90 mm, clearance of hole. 16mm vitreous,porcelain, white, brown or green complete all as specified and directed including removing of existing unserviceable from its position.
1
-
-
S&F in repairs galvanized steel wire stranded of size 7/2.24mm including necessary binding strengthening complete all as specified and directed.
0.15
-
-
Dismantling of u/s existing cross arms by means made from channels, angles, U/S FI clamps, nuts, bolts etc. from OH line complete all as specified and directed.
1.2
-
-
M&L Cross arms, bracings, supports, clamps and back plate fabricated from structural steel sections including nuts ,bolts, in any shape or size as indicated or directed and including two coats of aluminium paint over a coat of red oxide complete all as specified.
0.2
-
-
-Ditto- all as per item No 160 above but fixing old existing cross arms received against item No 159 above including cleaning, removing stain and including preparation of old steel surfaces applying two coats of aluminum paint over and including a coat of Red oxide (primer) all as directed by Engr. in charge.
1
-
-
Dismantling of existing u/s steel LT poles of any size & type from its position carefully and removing from the site and including necessary excavation and earth work in any soil/strata, demolition of concrete, disconnection of conductor from pole etc. complete all as directed.
1
-
-
Supply and install steel, tubular swaged poles complete with cast iron base plate, finial taper plug nuts and taper plug , bolts, nuts and screws as specified type 410-SP- 31 (9.0 m long) complete all as specified and directed. Note : Excavation, earth work shall be measured and paid separately.
1
-
-
Dismantling/taking down steel tubular/pcc pole of any size including insulater & cross arm& stay wire & refixing at new location directed by engr-in -charge. Note :- Excavation, earth work & PCC shall be measured & paid separately.
2
-
-
Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and n. exc 1.50 mtr deep, n. exc 10 Sqm on plan and getting out complete all as sp[ecified and directed.
531
-
-
-Ditto- all as per item No 165 above but depth exc 1.5 mtr and n. exc 3.00 mtr deep and getting out.
0.23
-
-
Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed by Engr-in-Charge.
434
-
-
Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point complete all as specified and directed.
97
-
-
M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation of poles etc complete all as specified.
0.32
-
-
M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for stays,foundation and platform for transformer installation complete all as specified.
0.86
-
-
M&L for Plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate for coping of pole with and including formwork complete all as specified and directed.
1.25
-
-
S&F in repairs 1100 Volts grade line composite phase separators, moulded & bolted type as per IS 1445 - 1997 suitable for the following :-
-
-
-
4 line
5
-
-
5 line
5
-
-
Taking down u/s LT U/G cable (including all mounting accessories, bricks and sand etc ) from trenches, wall, floor etc and removing to store for safe custody upto 25 sqmm complete all as specified and directed. Note:- Excavation for taking out cable will not paid for separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.
500
-
-
Taking down u/s U/G cable (including all mounting accessories, bricks & sand etc) from trenches, wall, floor etc and removing to store for safe custody above 35 upto 50 Sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.
300
-
-
Taking down u/s LT U/G cable from trenches, wall, floor etc and removing to store for safe custody above 75 to 95 sqmm complete all as specified and directed. Note:- Excavation for taking out cable shall not be paid separately, the cable shall be deemed to have taken down from the trenches excavated for laying of cables
300
-
-
S&F XLPE insulated armoured and PVC sheathed "heavy duty" electric cable with aluminium conductor 1100 volts grade laid in trenches, passing through pipes /ducts including testing complete of following cross sectional area of the following sizes:- Note:- Rate is inclusive of cable gland & cable lugs. The contractor shall be used old cable route indicator retrietive from item No 33 to 35 above. Fixing cost for the same shall be included in the quoted rates of these items. Make : Havells/GLOSTER/Poly Cab/Paragon
-
-
-
2 core, 10 sqmm cross sectional area
100
-
-
4 core, 16 sqmm cross sectional area
250
-
-
3-1/2 core, 25 sqmm cross section area
150
-
-
3-1/2 core, 35 sqmm cross section area
150
-
-
3 -1/2 core, 50 sqmm cross sectional area
150
-
-
3 -1/2 core, 70 sqmm cross sectional area
50
-
-
3 -1/2 core, 95 sqmm cross sectional area
250
-
-
S&F in repairs 40mm bore, GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed Make :- JINDAL/ ZENITH/ TATA/ PRAKASH
10
-
-
S&F in repairs 50mm bore GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA/ PRAKASH
6
-
-
S&F in repairs 80mm bore GI seel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed Make - JINDAL/ ZENITH/ TATA/ PRAKASH
6
-
-
S&F in repairs RCC hume pipe for road crossing of cables class NP-2 of size 100 mm dia complete all as specified.
3
-
-
Cutting of hardstanding/ Road for laying of pipe line/cable and making good surfaces after lying of pipe line/ cable upto 30cm in depth as per existing specification complete all as specified and directed.
3
-
-
M&L for boring of hole under road/hard standing by trenchless technology including S & F HDPE pipe "heavy duty " of size 100mm bore fixed in repairs complete all as specified and directed.
3
-
-
M&L unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Measurement shall be done after puning down of sand.
42
-
-
M&L Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` old size bricks laid dry and flat complete all as specified and as directed.
4800
-
-
Taking down of faulty LT UG cable of size upto 3.5x120 Sqmm from trenches /pole/wall etc for detecting fault including repair and jointing at site including relaying at the same location complete. Note:- Excavation/earth work and cable jointing & jointing kit shall be measured and paid separately under relevent item of schedule.
80
-
-
S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 10 Sqmm 4 core to 16 Sqmm 4 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal
2
-
-
S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 25 sqmm 3.5 core to 50 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal
2
-
-
S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size 70/ 95 sqmm 3.5 core cable size complete all as specified and directed. Make : M Seal/ Denson/Reychem/ Cab seal
3
-
-
S&F LT Joint cable, jointing kit straight through joint heat shrinkable type of size120 sqmm 3.5 core cable size to150 sq mm 3.5 core complete all as specified and directed. Make : M Seal/ Denson/Reychem/Cab seal
4
-
-
Taking down partly unserviceable/unserviceable security/street/gate/flood light fittings from poles/towers/Perimeter Fencing of any type upto 9 m height by manual or mechanical means and for necessary repair and make srviceable as per complaint given by department (E/M service cell) through job card/complaint register on day to day basis all to the satisfaction of Engr in charge & complete all as specified and directed
Note :- Ballast, Lamp holder, capacitor, ignitor, covers and lamps of required wattage/type shall be measured and paid separately.
70
-
-
Fixing only repaired serviceable fitting of any size, and any make complete all specified and directed by Engr-in-charge
58
-
-
S&F in repairs Electronic driver suitable for LED fitting 25 watt Make : bajaj/Wipro/Havells/ Crompton
15
-
-
S&F in repairs Electronic driver suitable for LED fitting 45 watt Make : bajaj/Wipro/Havells/ Crompton
10
-
-
S&F in repairs Electronic driver suitable for LED fitting 60 watt Make : bajaj/Wipro/Havells/ Crompton
10
-
-
S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-40 base Make: Bajaj/Havells/Crompton
5
-
-
S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-27 base Make: Bajaj/Havells/Crompton
5
-
-
S&F in repairs LED Lamp 40/45 watt type Retro fit E-22 base Make: Bajaj/Wipro/ Khaitan/ Syska/ Crompton
30
-
-
S&F in repairs LED Lamp 30/35 watt type Retro fit E-22 base Make: Bajaj/Wipro/ Khaitan/ Syska/ Crompton
10
-
-
S&F in repairs LED Lamp 20/25 watt type Retro fit E-22 base type Make: Bajaj/Wipro/ Khaitan/ Syska/ Crompton
5
-
-
Taking Down of street light Bracket including clamps of any type/any size from to pole/wall including necessary nut & bolts as directed complete all as specified and directed.
20
-
-
S&F GI pipe bracket made of light Grade tubing of size 40 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed
10
-
-
S&F GI pipe bracket made of light Grade tubing of size 32 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed
10
-
-
S&F LED street light lumanaries of size 90 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Wipro/ Havells/Syska/ Crompton
2
-
-
S&F LED street light lumanaries of size 72 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make : Bajaj/Wipro/ Havells/Syska/ Crompton
2
-
-
S&F LED street light lumanaries of size 60 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Wipro/ Havells/Syska/ Crompton
2
-
-
S&F LED street light lumanaries of size 45 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Wipro/ Havells/Syska/ Crompton
2
-
-
S&F LED street light lumanaries of size 25 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make: Bajaj/Wipro/ Havells/Syska/ Crompton
2
-
-
S&F in repairs post of lantern fitting made out of black ABS plastic spigot & spun alluminium funnel shaped with clear acraylic cover suitable for 1x20/25w LED lamp including fitting complete all as specified. Make : Bajaj/Wipro /Havels/Syska/Crompton
2
-
-
S&F in repairs PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper. Make of Box- SPELS BERG/ SINTEX/ HENSEL
5
-
-
S&F in repairs PVC insulated 3 core 2.5 sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/plaza/havells/CCI/PARAGON
50
-
-
S&F in repairs PVC insulated 3 core 1.5 sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed Make: finolex/plaza/havells/CCI/PARAGON
50
-
-
S&F MCCB 630 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager
1
-
-
S&F MCCB 250 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager
2
-
-
S&F MCCB 200 A 35 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager
1
-
-
S&F MCCB 160 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager
4
-
-
S&F MCCB 125 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager
1
-
-
S&F MCCB 100 A 25 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager
4
-
-
S&F MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager
6
-
-
M&L for Preparation for surface of existing PCC poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality Exterior grade apex paint all as directed by Engr in charge.
10
-
-
M&L for Preparation for surface of existing steel poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality of aluminum paint all as directed by Engr in charge.
10
-
-
S&F in repairs sheet metal box of size 60cmx60cmx20 cm for fixing street light timer switch , frame pole mounted type fabricated out of 1.6 MM sheet steel including powder coat painting over a coat of red oxide primer including ,consisting of the following :- (a) MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu & L&T cat no- CM97919OOH2OG /Legrand cat no-420013/schneider cat no-LV510315 - 2 nos (b) Astronomical, Multifunctional digital time swithces cat no 004767 of legrand or equivalent of L & T cat no- T2 DD T7/MDS/GIC - 1 no. (c )Power contactor ML-4 , 3 pole rating not less than 70 A with 230 coil make L&T/SEIMENS - 1 no. (d) Internal wiring and, clamp - 02 no.made out of 40x5mm flat & angle 40x40x5mm -0.90m long -2Nos. (e ) MCB SP 6 amps-1 No
1
-
-
Dismentling of sheet matel box of metal box of size 60cmx60cmx20 cm for fixing street light timer switch , frame pole mounted type fabricated out of 1.6 MM sheet steel all as specified and directed by Engineer in Charge.
1
-
-
Note :- Schedule of Credit amounting to Rs. 2,32,035.00 to be deducted during AOC
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements