Military Engineer Services Tender

Attending daily complaints of Gwalior Mil area and AAU by deputing adequate number of Skilled teams of qualified Electrician and helper any time of the day (Minimum 01 Skilled Electrician & 02 Helper) for repair / tightening of end terminals of street light fitting, Flood light, LED strip on poles, High Mast light, Post top lanten of any size/capacity at any height and repair the street lights, Flood lights and Post Top lanten having minor faults i.e. loose connections, carbon deposition, Shifting and refixing the same etc and make the light functional. After rectifying the defects of the electrical system renew the U/S items such as street light, flood lights, LED strips, MCBs TPN, connection plate, thimbles and timmer small pieces of electrical cables PVC insulated copper multistranded conductor of sizes 2.5 Sqmm to 6 Sqmm twin core and length not increasing 1.5 mtrs complete all as specified and directed. (Complaint slip shall be part of the bill) and In Addition one 16 mtrs hight hydraulic vehicle with driver & operator of the same team will opearte and manage day to day street light Complaints and update the status of complaints on daily basis and confirmed throgh concerned JE E/M daily as per directed by Engr-in Charge. Note:- (i)Complaint shall be done within 24 hrs after intimation by JE E&M Engineer-in-Charge failling which penalty of Rs 250 per day per complaint will be levied on contractor. (ii) One supervisor will report to JE E/M , Engineer -in-Charge on daily basis with complaint register. (iii) Contractor shall be fully responsible for Complaint slip/ Job card prepared and submitted on daily basis ( Format as per provided by the Engineer in Charge. (iv) This item pertains to attending complaints of street light/flood light/LED strips on poles/High mast, MCB, & timer panel including other minor items such as insulating tape, screws etc as required to attend the complaint to the entire satisfaction of user/Engr-in-Charge.

Material and labour for overhauling of existing 16 meters height high mast lighting system by degreasing and cleaning of double drum winch, gear box, wire rope, clamp, bobbin arrangement, power tool motor, mechanical torque limiter, lowering the mast head assembly, degreasing and cleaning the pulley, docking arm etc and applying new grease/ lubricating oil for all mechanical moving/rotating parts, checking all the electrical parts such as timer panel, all cable connections in control panel, motor, junction box, flood light fittings & aviation obstruction light fitting etc, rectifying the defects, renewing the defective components etc including testing for proper functioning complete all as specified and directed. Note: The cost of minor spare parts & lubrication is deemed to be included in the quoted rate.

Supply and fix in renewal of 120 Watt LED flood light(Red, Green and Worm White colour) fitting made up of Pressure die-cast aluminium alloy housing with toughened glass, IP-65 protection and impact resistance of IK07 and individual high power LEDs with secondary optics having system lumen efficacy ≥100 lm/W, inbuilt potted electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection & other safety test as per IS 15885 Part-2/Sec 13 and BIS complying including surface mounting using adjustable MS cradle of thickness 5 mm provided with the fixture of any description complete all as specified and directed. Note :- LM 79 test report, LM 80 report with minimum 9000 hrs testing to support 50K life TTC and dirver NABL accreditated report shall be submitted before execution of work to the Engineer-in-charge.