Awadhesh Pratap Singh University Tender

Wooden office table 5*2.5size shall be 1500 Width x 750 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .Drawer slides are of Hettich.Manufacturing Bidders should have the following ISO Standards –ISO – 9001:2008, and a robust Quality Management System (QMS),ISO 14001:2004, The manufacturer must have ISO 18001 - the Occupational Health and Safety Management Systems, The manufacturer must have ISO 50001- Energy management systems all certificate fro TUV NORD Certifying Agencies. The manufacturer should be certified for comprehensive GREEN MANUFACTURING certification , IAQ Certificate from (SCS Global Services) Green Guard for LOW Chemical Emmison of International repute & member of BIFMA Membership and BIFMA (Level (R) 2) Certificate from (SCS Global Services).

Revolving chair 2SEAT/BACK ASSEMBLY : The Cushioned seat should be made of Injection molded Plastic outer & inner. Plastic Inner should be upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,andhardness load 16 ± 2 kgf as per IS:7888 for 25% compression.The Cushioned back should be made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with LeatheretteSeatSIZE : 47.0 cm. (W) x 48.0 cm. (D)HIGH BACK SIZE: 47.7 cm. (W) x 76.4 cmARMRESTS : The armrest top should be moulded from polyurethane(PU) and mounted on to a drop lift adjustable type ubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.Thearmrestheight adjustable up to 6.5±0.5cm in 5 steps.ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism should be designed with the following features:360' revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should be made up of HPDC Aluminium black powder coated.SEAT DEPTH ADJUSTMENT : Seat depth adjustment should be integrated in the seat througha sliding mechanism. Seat depth adjustment range should be of 6.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Frame should be connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of7.42±0.5 cm for the comfortable back support to suit individual need.PNEUMATIC HT. ADJUSTMENT: The pneumatic ht adjustment has an adjustment stroke of 10.0±0.3 cm.PEDESTAL ASSEMBLY: The pedestal should be High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEELCASTORS: The twin wheel castors should be injection moulded in blackPP having 6.0± 0.1cm wheel Diameter.Overall Dimensions of ChairSeat Height -43.1-53.1cmHeight -112.7-130.2cm.Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. Manufacturing Bidders should have the following ISO Standards –ISO – 9001:2008, and a robust Quality Management System (QMS),ISO 14001:2004, The manufacturer must have ISO 18001 - the Occupational Health and Safety Management Systems, The manufacturer must have ISO 50001- Energy management systems all certificate fro TUV NORD Certifying Agencies. The manufacturer should be certified for comprehensive GREEN MANUFACTURING certification , IAQ Certificate from (SCS Global Services) Green Guard for LOW Chemical Emmison of International repute & member of BIFMA Membership and BIFMA (Level (R) 2) Certificate from (SCS Global Services).

Premium executive table with side table size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -3616 LHS size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.Manufacturing Bidders should have the following ISO Standards –ISO – 9001:2008, and a robust Quality Management (QMS),ISO 14001:2004, The manufacturer must have ISO 18001 - the Occupational Health and Safety Management Systems, The manufacturer must have ISO 50001- Energy management systems all certificate fro TUV NORD Certifying Agencies. The manufacturer should be certified for comprehensive GREEN MANUFACTURING certification , IAQ Certificate from (SCS Global Services) Green Guard for LOW Chemical Emmison of International repute & member of BIFMA Membership and BIFMA (Level (R) 2) Certificate from (SCS Global Services).