Awadhesh Pratap Singh University Tender

Desk Cum bench 3 seater Desk-Top Panel- All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have corners rounded for safety usage.Understructure:All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which arewelded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG)rectangularERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobularscrews(As per DIN 7500)with Zn blue plating. Compact Laminate seat and back panels are assembled using M6 Countersunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986)Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%) Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product.M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm.Manufacturing Bidders should have the following ISO Standards –ISO – 9001:2008, and a robust Quality Management System (QMS),ISO 14001:2004, The manufacturer must have ISO 18001 - the Occupational Health and Safety Management Systems, The manufacturer must have ISO 50001- Energy management systems all certificate fro TUV NORD Certifying Agencies. The manufacturer should be certified for comprehensive GREEN MANUFACTURING certification , IAQ Certificate from (SCS Global Services) Green Guard for LOW Chemical Emmison of International repute & member of BIFMA Membership and BIFMA (Level (R) 2) Certificate from (SCS Global Services).

Desk cum bench 2 seater Desk Cum Bench size shall be 1048 Width mm x 895 Depth mm x 750 Height mm . Top & Seat Panel shall be 18 mm thick PLB(pre - laminated board ) with Back panel shall be 18 mm thick PLT . The Understructure shall be MS SQ tubes of size 25.4 mm x 1.2 mm Plus there shall also be a storage Shelf . Manufacturing Bidders should have the following ISO Standards –ISO – 9001:2008, and a robust Quality Management System (QMS),ISO 14001:2004, The manufacturer must have ISO 18001 - the Occupational Health and Safety Management Systems, The manufacturer must have ISO 50001- Energy management systems all certificate fro TUV NORD Certifying Agencies. The manufacturer should be certified for comprehensive GREEN MANUFACTURING certification, IAQ Certificate from (SCS Global Services) Green Guard for LOW Chemical Emmison of International repute & member of BIFMA Membership and BIFMA (Level (R) 2) Certificate from (SCS Global Services).

Desk cum bench 2 seater Desk-Top Panel- All panels are made from 18mm thk Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides.The panels have corners rounded for safety usage.Understructure:All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thk(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together.The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating.Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating.The storage shelves are made from 0.6 mm thk MS sheet(As per IS:513) fixed below the radesk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thk MS sheet(As per IS:513) and are coated with min. 45 micron thickness of epoxy polyester coating. The understructure is assembled using M6 trilobularscrews(As per DIN 7500)with Zn blue plating. Compact Laminate seat and back panels are assembled using M6 Countersunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986) Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%) Plastic Caps made of PP copolymer(3530 Grade) are also provided on the rear frames adding more aestheic value to the product. M6 high tensile TVS make bolt(Class 8.8) with glasss filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm.Manufacturing Bidders should have the following ISO Standards –ISO – 9001:2008, and a robust Quality Management System (QMS),ISO 14001:2004, The manufacturer must have ISO 18001 - the Occupational Health and Safety Management Systems, The manufacturer must have ISO 50001- Energy management systems all certificate fro TUV NORD Certifying Agencies. The manufacturer should be certified for comprehensive GREEN MANUFACTURING certification , IAQ Certificate from (SCS Global Services) Green Guard for LOW Chemical Emmison of International repute & member of BIFMA Membership and BIFMA (Level (R) 2) Certificate from (SCS Global Services).