Military Engineer Services Tender

One 3 pin socket outlet on the same board controlled by one single pole 6 Amp piano switch

One 3 pin 5 amps socket outlet independent controlled by one single pole 6 Amp piano switch.

All as per ser item 2 but for 3/5 pin 15Amp socket outlet independent with PVC unsheathed, multistrand copper conductor of 2.5 Sqmm and continuous PVC insulated and unsheathed 2.5 Sqmm copper conductor cable multistrand as earth wire all as specified and directed.

S & F Switch piano flush type 6 amps, one way duly ISI marked.

S & F Switch socket combination of 6 and 15 A flush type , one way ISI marked.

S & F Socket outlet 5 pin, 6 Amps, piano flush type duly ISI marked

S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked.

S & F Lamp holder PVC/Polycarbonate type complete all as spicified and directed .

S&F LED tube light fitting 1 X 20 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.. MAKE: crompton/bajaj/wipro or equivalant.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply & Fix in repair sheet metal enclouser DB's 4 way TPN double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 415 volts 200 Amps rated enameled bus bar 16 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed by eng-in-charge.

Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

Supply & Fix in repair sheet metal enclouser SPN DB's 4 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified and directed.

Supply & Fix Isolater MCB Triple pole neutral(TPN) 415volts, 63 Amps, 10 KA complete all as specified.

Supply & Fix MCB single pole neutral(SPN) 240 volts, 20 to 40 Amps, 10 KA complete all as specified.

Supply & Fix MCB single pole(SP) 240 volts, 06 to 40 Amps, 10 KA complete all as specified.

Supply & Fix Sheet Metal Enclouser with socket plug top & MCBs with a two pin and earth plug and socket of 20 Amp complete with double pole MCB of 20 amp as specified and directed.

Supply & Fix sub main wiring of 2x4.0 sq. mm + 1x4 sq. mm earth wire sqmm PVC insulated unsheathed FR cable multistranded copper conductor with earth wire of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC casing Caping all as specified and directed.

M&L for Earthing complete with copper plate electrode 600x600x3.15mm thick electrode burried directly in ground not less than 3.0 mtr deep below normal ground level with top edge of earth plate not less than 2.5 mtr below normal ground level connected to and including and 20x3 mm copper strip as earth lead by means of bolt ,nuts, check nuts, and washers of stainless steel and duly welded incl PCC pit in PCC 1:2:4 type B-I angle iron 40x40x3mm frame, pit in PCC 1:2:4 type B-I cover 40mm reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, excavation and earth work in any type of soil, charcoal dust and salt light grade GI watering pipe 20mm bore with funnel and wire mashand medium grade GI protection pipe 40mm bore and earth wire up all as shown in electrical plate No 3 of MES SSR- Part-I all as directed and specified by Engineer-in-charge. Note : (i) Excavation work should be done by manpower only. (ii) Earth test should be done by contractor at his own cost and if required result is not found at site, entire earthing should be re-done by contractor again without accruing any extra cost to the department. No claim whatsover on redoing the earthing shall be admissible by the department to the contractor.