Military Engineer Services Tender

Supply & Fixing in repairs ignition Transformer electronic type suitable for 4 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed.

Supply & Fixing in repairs temp controller digital type DTC 503 with sensor suitable for 4 lakh kilo/Cal/hr LAL 2.25 burner rod assembly, complete all as specified and directed.

Supply & Fixing in repairs pressure gauage 0 to 10.6 Kg/cm sq as per existing, complete all as directed by Engineer-in-Charge.

Supply & Fixing in repairs photo cell as per existing suitable for 4 lakh kilo/Cal/hr burner rod assembly, complete all as specified and directed.

Supply & Fixing in repairs burner nozzle suitable for 4 lakh K/Cal/Hr complete all as specified and directed.

Supply & Fixing in repairs Electrode suitable for burner of capacity 3-4 lakh K/Cal/Hr complete all as specified and directed.

Supply & Fixing in repairs Bridge rectifire complete all as specified and directed.

Supply & Fixing in repairs hooter round type complete all as specified and directed.

Supply & Fixing in repairs thermostate assembly tail type as per existing suitable for 0-70 degree centrigrade temprature, complete all as specified and directed. Make- Honeywell or equivalent approved make.

Supply & Fixing in repairs oil pressure pump 7276-3D67A complete all as specified and directed. Make- Suntec or equivalent approved make.

Supply & Fixing in repairs Fuel filter 1/2 ltr, completel as speciied and directed. Make- Kirloskar / Mico / TVS.

Supply & Fixing in repairs auto air pressure valve 3/8" as per existing, complete all as specified and directed.

Supply & Fixing in repairs High pressure fuel pipe 1.5 mtr as per existing, complete all as specified and directed.

Dismantling old unserviceable diesel burner and supply and fixing diesel burner set of capacity 4 Lac K Cal/Hr comprising of diffuser, nozzle, electrodes, blast tube, solenoid valve, air damper adjustment, gear pump, coupling set, oil supply jpipe, gasket, ignition transformer, reset button, frame detector anmd controller compete all as specified and directed.

Supply & Fixing in repairs fan coil unit, duel shaft electric motor 30 watt 930 RPM, 3 speed as per existing, complete all as specified and directed.

Supply and fixing in repairs radiator unit of FCU including connecting with the unit and making it leakproof of copper coils covered with aluminium finishing as per existing size of capacity 3000 K Cal / Hour compete all as specified and directed.

Supply and fixing in repairs radiator unit of FCU including connecting with the unit and making it leakproof of copper coils covered with aluminium finishing as per existing size of capacity 4500 K Cal / Hour compete all as specified and directed.

Supply and fixing in repairs radiator unit of FCU including connecting with the unit and making it leakproof of copper coils covered with aluminium finishing as per existing size of capacity 6000 K Cal / Hour compete all as specified and directed.

Excavation in trenches not exceeding 1.5m in wide and not exceeding 1.5 m in depth for laying of pipe etc and getting out in soft / loose soil, complete all as specified and directed.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.(Surplus soil if any shall not be removed but left over the trench)

Removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Punned thickness of 18cm will be measured and paid for.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flat size 250mm x 150mm x 40mm, complete all as specified and directed

Supply and laying in repairs XLPE insulated, armoured, heavy duty electric cables with stranded aluminium conductor rating 1100 volts grade of size 70 Sqmm 3.5 core laid in trenches or passing through pipes.ducts or fixed to walls/poles completer all as specified.

Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 10 HP with superior quality super enameled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.

Material and labour for rewinding of electric motor 3 phase 415 volts of capacity 7.5 HP with superior quality super enamelled copper winding wire of appropriate size and gauge as existing including varnishing , cotton tape, PVC sleeves etc, complete all as specified and directed by Engr-in-Charge.

Supply and lay mild steel Pipe heavy grade with all fittings laid in floors or fixed to walls and ceiling etc of size 150 mm bore, complete all as specified and directed by Engr-in-Charge.

Supply and lay mild steel pipe heavy grade with all fittings laid in floors or fixed to walls and ceiling etc of size 100 mm bore, complete all as specified and directed by Engr-in-Charge.

Material & Labour for insulation of MS Pipe with PUF slab 40mm thick with and including applying bituminuous compound and GI cladding with 26 guage GI sheet complete of size 150mm bore compete all as specified and directed.

Material & Labour for insulation of MS Pipe with PUF slab 40mm thick with and including applying bituminuous compound and GI cladding with 26 guage GI sheet complete of size 100mm bore compete all as specified and directed.

Supply & Fixing in repairs gun metal butter fly control valves of 100mm bore as per existing, complete all as specified and directed.

Supply and fixing in repairs balancing valve of 100mm dia complete all as specifiled and directed.

Supply and fix, install, testing and commissioning in repairs fuel pump and motor of capacity 1 HP single phase 215 Volts complete all as speciifiled and directed.

Excavation in post holes (or similar holes) each n exc 0.5cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm compete all as specified and directed..

Material & Labour for PCC type D-2, (1:3:6), using 40mm graded crushed stone aggregate as in lean concrete, sub base or mass concrete, foundation filling etc complete all as specified and directed.

Supply & Fixing steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161-1979 grade St-240 complete all as specified and directed.

Material & Labour for preparation of new or previously untreated steel surfaces exc 10cm in width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick above or below ground level and removing demolished material out of Military station compete all as specified and directed.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches pillars etc all as specified and directed.

Material and labour for precast solid block masonry set in CM 1:6 & casted in cement concrete type C-1 (1:3:6) using 20mm graded aggregate crushed stone complete all aspecified and directed.

Material & Labour for rendering on other than faces of stone masonry work finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and dilrected.

Supply,Installation ,testing and Commissioning in repairs LT Panel cubical type indoor floor mounted weather proof totally enclosed, (CPRI approved) factory made and made out of 2.0 mm thick CRCA powder coated sheet and angle iron complete with bus bar of copper of suitable size of capacity 400 Amps 3 Phase and neutral 415 Volts 50 Hz mounted on epoxy type insulators with PCC flooring and angle iron base frame including space to accommodate 10 Nos DOL starters compitable for monoblock motor and pump of capacity upto 10 HP each on seperate housing including powder coating having IP-54 and conforming to IS-8623 and including following accessories:- INCOMING (a) MCCB 160 Amps 4 pole, with short circuit and earth fault protection with earth module breaking capacity 35 KA- 01 Nos (b) Change over switch open execution type 160 Amp 4 pole - 01 No OUT GOING (c) MCB SPN 32 Amps, 240 Volts, 50 Hz 'C' curve type- 06 Nos (d) MCB SPN 63 Amps, 240 Volts, 50 Hz 'C' curve type - 06 Nos e) Digital Volt meter with selector switch f) Digital Amp meter with selector switch with necessary CT g) LED indicating lamp - 11 Set Note :-(i) All MCCBs / instruments / MCBs /Bus Bar and starters shall be housed in a separate housing with on- off latches in the housing.

Material & Labour for disconnecting all connection in existing panel board complete and re-fixing the same after removing the burnt lugs/thimbles complete including replacing unserviceable MCCBS, Contactors, relay, bus bar, indicator lamps etc., and complete including painting work all as specified and as direcrted. Note- MCCBs, Contactors, relay, indicator lamps, S/Switchs shall be measured and paid for seperately.

Supply & Fixing in repairs DOL starter MK-1, 1 HP as per existing, complete all as specified and directed. Make -L&T SS96210 or equivelent of Havells/Siemens

Supply & Fixing in repairs over load relay 8 to 12.5 Amps for contactor matching series ML 2 &3 complete all as specified and directed. Make: SEIMENS Cat No of L&T SS91859OOAO or equivelent of Havells/L&T.

Supply & Fixing in repairs digital type volt meter 0-500 volts, complete all as specified and directed. Make- L & T WDS301FEV00 or equivelent of Havells/AE.

Supply & Fixing in repairs digital type Amp meter complete with suitable CTs 0-300 Amps, complete all as specified and directed. Make- L & T WDS301FCA00 or equivelent of Havells/AE.

Supply & Fixing in repairs indicating lamps RYB as per existing complete all as specified and directed.

Supply & Fixing in repairs rotary type ON/OFF switches, 22mm dia as per existing, complete all as specified and directed. Make L&T -LCKB90S2 or equivelent of Havells/AE.

Supply & Fixing in repairs push button switch in RED or GREEN colours, 22mm dia as per existing, complete all as specified and directed.

Supply & Fixing in repairs PVC flexible copper multistranded wire 3 core of 6 sqmm as per existing, complete all as specified and directed. Make- RR Kabel/Havells/Anchor

Supply & Fixing in repairs PVC flexible copper multistranded wire 2 core of 6 sqmm as per existing, complete all as specified and directed.Make- RR Kabel/Havells/Anchor